Characterization of disulfide bonds in recombinant proteins: reduced human interleukin 2 in inclusion bodies and its oxidative refolding

Cloned cDNA of human interleukin 2 (IL-2) was expressed in Escherichia coli cells in which IL-2 formed insoluble inclusion bodies. Human IL-2 has three Cys residues, namely, Cys-58, Cys-105, and Cys-125, and native IL-2 has an intramolecular disulfide bond between Cys-58 and Cys-105. Since the formation of inclusion bodies was thought to be due to disorder in the oxidation state of these Cys residues, all intramolecular disulfide bond isomers of IL-2 were prepared by denaturation of native IL-2 to characterize the state of a disulfide bond in IL-2 in the inclusion bodies. These isomers can be separated from native IL-2, reduced IL-2, and IL-2's with intermolecular disulfide bonds by means of reversed-phase high-performance liquid chromatography. Human IL-2 produced in inclusion bodies in E. coli carrying a recombinant DNA was analyzed by HPLC and was proved to be a fully reduced form with no intra- and intermolecular disulfide bonds. Refolding of reduced IL-2 in the presence of reduced and oxidized glutathione and a low concentration of guanidine hydrochloride resulted in the formation of the biologically active IL-2 quantitatively. Further purification provided a practically pure IL-2 preparation without contamination of any disulfide bond isomers.     

Identification of nonessential disulfide bonds and altered conformations in the v-sis protein, a homolog of the B chain of platelet-derived growth factor.

The protein encoded by v-sis, the oncogene of simian sarcoma virus, is homologous to the B chain of platelet-derived growth factor (PDGF). There are eight conserved Cys residues between PDGF-B and the v-sis protein. Both native PDGF and the v-sis protein occur as disulfide-bonded dimers, probably containing both intramolecular and intermolecular disulfide bonds. Oligonucleotide-directed mutagenesis was used to change the Cys codons to Ser codons in the v-sis gene. Four single mutants lacked detectable biological activity, indicating that Cys-127, Cys-160, Cys-171, and Cys-208 are required for formation of a biologically active v-sis protein. The other four single mutants retained biological activity as determined in transformation assays, indicating that Cys-154, Cys-163, Cys-164, and Cys-210 are dispensable for biological activity. Double and triple mutants containing three of these altered sites were constructed, some of which were transforming as well. The v-sis proteins encoded by biologically active mutants displayed significantly reduced levels of dimeric protein compared with the wild-type v-sis protein, which dimerized very efficiently. Furthermore, a mutant with a termination codon at residue 209 exhibited partial transforming activity. This study thus suggests that the minimal region required for transformation consists of residues 127 to 208. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis indicated that the v-sis proteins encoded by some of the biologically active mutants exhibited an altered conformation when compared with the wild-type v-sis protein, and suggested that Cys-154 and Cys-163 participate in a nonessential disulfide bond.     

Use of a disulfide cross-linking strategy to study muscarinic receptor structure and mechanisms of activation.

To gain insight into the molecular architecture of the cytoplasmic surface of G protein-coupled receptors, we have developed a disulfide cross-linking strategy using the m3 muscarinic receptor as a model system. To facilitate the interpretation of disulfide cross-linking data, we initially generated a mutant m3 muscarinic receptor (referred to as m3'(3C)-Xa) in which most native Cys residues had been deleted or substituted with Ala or Ser (remaining Cys residues Cys-140, Cys-220, and Cys-532) and in which the central portion of the third intracellular loop had been replaced with a factor Xa cleavage site. Radioligand binding and second messenger assays showed that the m3'(3C)-Xa mutant receptor was fully functional. In the next step, pairs of Cys residues were reintroduced into the m3'(3C)-Xa construct, thus generating 10 double Cys mutant receptors. All 10 mutant receptors contained a Cys residue at position 169 at the beginning of the second intracellular loop and a second Cys within the C-terminal portion of the third intracellular loop, at positions 484-493. Radioligand binding studies and phosphatidylinositol assays indicated that all double Cys mutant receptors were properly folded. Membrane lysates prepared from COS-7 cells transfected with the different mutant receptor constructs were incubated with factor Xa protease and the oxidizing agent Cu(II)-(1,10-phenanthroline)3, and the formation of intramolecular disulfide bonds between juxtaposed Cys residues was monitored by using a combined immunoprecipitation/immunoblotting strategy. To our surprise, efficient disulfide cross-linking was observed with 8 of the 10 double Cys mutant receptors studied (Cys-169/Cys-484 to Cys-491), suggesting that the intracellular m3 receptor surface is characterized by pronounced backbone fluctuations. Moreover, [35S]guanosine 5'-3-O-(thio)triphosphate binding assays indicated that the formation of intramolecular disulfide cross-links prevented or strongly inhibited receptor-mediated G protein activation, suggesting that the highly dynamic character of the cytoplasmic receptor surface is a prerequisite for efficient receptor-G protein interactions. This is the first study using a disulfide mapping strategy to examine the three-dimensional structure of a hormone-activated G protein-coupled receptor.     

Disulfide structure of the leucine-rich repeat C-terminal cap and C-terminal stalk region of Nogo-66 receptor

Nogo-66 receptor (NgR1) is a leucine-rich repeat (LRR) protein that forms part of a signaling complex modulating axon regeneration. Previous studies have shown that the entire LRR region of NgR1, including the C-terminal cap of the LRR, LRRCT, is needed for ligand binding, and that the adjacent C-terminal region (CT stalk) of the NgR1 contributes to interaction with its coreceptors. To provide structure-based information for these interactions, we analyzed the disulfide structure of full-length NgR1. Our analysis revealed a novel disulfide structure in the C-terminal region of the NgR1, wherein the two Cys residues, Cys-335 and Cys-336, in the CT stalk are disulfide-linked to Cys-266 and Cys-309 in the LRRCT region: Cys-266 is linked to Cys-335, and Cys-309 to Cys-336. The other two Cys residues, Cys-264 and Cys-287, in the LRRCT region are disulfide-linked to each other. The analysis also showed that Cys-419 and Cys-429, in the CT stalk region, are linked to each other by a disulfide bond. Although published crystal structures of a recombinant fragment of NgR1 had revealed a disulfide linkage between Cys-266 and Cys-309 in the LRRCT region and we verified its presence in the corresponding fragment, this is artificially caused by the truncation of the protein, since this linkage was not detected in intact NgR1 or a slightly larger fragment containing Cys-335 and Cys-336. A structural model of the LRRCT with extended residues 311-344 from the CT stalk region is proposed, and its function in coreceptor binding is discussed.     

Natural disulfide bond-disrupted mutants of AVR4 of the tomato pathogen Cladosporium fulvum are sensitive to proteolysis,circumvent Cf-4-mediated resistance,but retain their chitin binding ability

The extracellular AVR4 elicitor of the pathogenic fungus Cladosporium fulvum induces defense responses in the tomato genotype Cf-4. Here, the four disulfide bonds of AVR4 were identified as Cys-11-41, Cys-21-27, Cys-35-80, and Cys-57-72 by partial reduction with Tris-(2-carboxyethyl)-phosphine hydrochloride, subsequent cyanylation, and base-catalyzed chain cleavage. The resulting peptide fragments were analyzed by mass spectrometry. Sequence homology and the disulfide bond pattern revealed that AVR4 contains an invertebrate (inv) chitin-binding domain (ChBD). Binding of AVR4 to chitin was confirmed experimentally. The three disulfide bonds encompassing the inv ChBD motif are also required for protein stability of AVR4. Independent disruption of each of the three conserved disulfide bonds in AVR4 resulted in a protease-sensitive protein, whereas the fourth disulfide bond appeared not to be required for protein stability. Most strains of C. fulvum virulent on Cf-4 tomato contain Cys to Tyr substitutions in AVR4 involving two (Cys-11-41, Cys-35-80) of the three disulfide bonds present in the inv ChBD motif. These natural Cys to Tyr mutant AVR4 proteins did retain their chitin binding ability and when bound to chitin were less sensitive to proteases. Thus, the widely applied tomato Cf-4 resistance gene is circumvented by C. fulvum by amino acid substitutions affecting two disulfide bonds in AVR4 resulting in the absence of the corresponding AVR4 isoforms in apoplastic fluid. However, these natural isoforms of AVR4 appear to have retained their intrinsic function, i.e. binding to chitin present in the cell wall of C. fulvum, most likely to protect it against the deleterious effects of plant chitinases.     

The site of linkage of a retinoid affinity label to plasma retinol-binding protein

The retinoid affinity label 11[³H]--ionylidene ethylbromoacetate (IEBA) was covalently bound to plasma retinol-binding protein (RBP) and studies were conducted to identify the region of the protein molecule that contained the linkage between the IEBA ligand and RBP. Cleavage by trypsin and cyanogen bromide of the labeled protein followed by high-performance liquid chromatography (HPLC) separation of peptides and identification of radioactive peaks by amino acid analysis points to attachment of the ligand on tryptic peptides T(1+2) (containing residues 1–5) and T(21) (residues 156–163). These two peptides in the native protein molecule are connected by a disulfide bond between Cys-4 and Cys-160. To confirm the site of attachment of the radioactive ligand, unreduced IEBA-RBP with the disulfide bonds intact was treated first with cyanogen bromide and then with trypsin. Separation of the tryptic peptides by HPLC yielded one main peak of radioactivity containing both peptides T(1+2) and T(21), presumably connected by a disulfide bond. Taken together, these results indicated that the sites of attachment of IEBA to RBP are located within the region of the RBP molecule close to the Cys-4–Cys-160 bond, and specifically within the region comprised of amino acid residues 1–5 and 156–163.     

Mutational analysis of disulfide bridges in the Mr 46,000 mannose 6-phosphate receptor. Localization and role for ligand binding

Formation of intramolecular disulfide bonds is a key step in the early maturation of newly synthesized Mr 46,000 mannose 6-phosphate receptors to acquire ligand-binding activity (Hille, A., Waheed, A., and von Figura, K. (1990) J. Cell Biol. 110, 963-972). The luminal domain of the receptor, which carries the ligand-binding site, contains 6 cysteine residues. We have analyzed the function of individual cysteine residues for the ligand-binding conformation by exchanging cysteine for glycine. In each case, the replacement of cysteine resulted in a complete loss of binding activity, indicating that all 6 luminal cysteine residues are required for the ligand-binding conformation. The cysteine mutants displayed a greatly reduced immunoreactivity, decreased stability, and a blocked or delayed transport to the trans Golgi. The glycosylation pattern allowed the distinguishing of three phenotypes, each of which was represented by one pair of cysteine mutants. Based on the assumption that replacement of either of the 2 cysteine residues forming a disulfide bond results in an identical phenotype, we postulate that disulfide bonds are formed between Cys-32 and Cys-78 and between Cys-132 and Cys-167, as well as between Cys-145 and Cys-179. This assumption was supported by the observation that the simultaneous exchange of the 2 cysteine residues of a putative pair resulted in the same phenotypes as the single exchange of either of the 2 cysteine residues.     

Unpaired cysteine-54 interferes with the ability of an engineered disulfide to stabilize T4 lysozyme

We have introduced an intramolecular disulfide bond into T4 lysozyme and have shown this molecule to be significantly more stable than the wild-type molecule to irreversible thermal inactivation [Perry, L.J., & Wetzel, R. (1984) Science (Washington, D.C.) 226, 555-557]. Wild-type T4 lysozyme contains two free cysteines, at positions 54 and 97, and no disulfide bonds. By directed mutagenesis of the cloned T4 lysozyme gene, we replaced Ile-3 with Cys. Oxidation in vitro generated an intramolecular disulfide bond; proteolytic mapping showed this bond to connect Cys-3 to Cys-97. While this molecule exhibited substantially more stability against thermal inactivation than wild type, its stability was further enhanced by additional modification with thiol-specific reagents. This and other evidence suggest that at basic pH and elevated temperatures Cys-54 is involved in intermolecular thiol/disulfide interchange with the engineered disulfide, leading to inactive oligomers. Mutagenic replacement of Cys-54 with Thr or Val in the disulfide-cross-linked variant generated lysozymes exhibiting greatly enhanced stability toward irreversible thermal inactivation.     

Sequence requirements for ligand binding and cell surface expression of the Tac antigen, a human interleukin-2 receptor

Discrete peptide domains within the primary sequence of cell-surface receptor glycoproteins are believed to regulate not only their function but also their targeting to the cell membrane. To identify sequence elements required for intracellular transport and ligand binding by the human Tac interleukin-2 (IL-2) receptor, we prepared expression plasmids encoding a series of artificially mutated or naturally occurring variants of the Tac cDNA. In particular, we sought to further delineate the functional role of the sequences contributed by each of the eight exons that together encode the Tac protein. Deletion of exons 5 through 8 of the receptor had no detectable effect on IL-2 binding or intracellular transport of the Tac protein, and resulted in secreted forms of this IL-2-binding protein. Removal of sequences corresponding to all of exon 4 ablated IL-2 binding activity yet still permitted transport to the cell surface. In contrast, partial deletion of exon 4 sequences resulted in proteins that not only lacked IL-2 binding activity but also were sequestered within the endoplasmic reticulum. Removal of one or both of the N-linked glycosylation sites present in the Tac protein did not impair receptor transport or ligand binding. These results demonstrate that exon 4 of the Tac gene encodes amino acid residues that play an important role in regulating both the intracellular transport and function of this IL-2 receptor.     

Rat gro/melanoma growth-stimulating activity. Assessment of the structure responsible for chemotactic activity by use of its fragments prepared by proteolysis and chemical synthesis.

Rat gro/melanoma growth-stimulating activity is a dimer composed of two identical subunits. Each subunit consists of 72 amino-acid residues and contains two disulfide bridges. In order to obtain information on the structure responsible for chemotactic activity, various fragments of gro were prepared and tested for their ability to induce chemotaxis. None of the fragments corresponding to residues 1-6, 1-21, 12-31, 36-50 or 52-72 was active as a chemoattractant. Reduced and carboxymethylated gro as well as the tryptic peptide consisting of three peptides, residues 9-21, 28-45 were and 49-61, linked by two disulfide bonds Cys-9-Cys-35 and Cys-11-Cys-51, were inactive. Also, these, peptides did not inhibit the chemotactic activity of gro. Rat gro lacking the N-terminal 6 residues had a reduced activity and the one lacking the C-terminal Lys was as active as intact gro. Therefore, an almost entire portion of the molecule including disulfide cross-links is required for chemotactic activity.     

Role of disulfide bonds in biologic activity of human interleukin-6.

We have examined the functional importance of the two disulfide bonds formed by the four conserved cysteines of human interleukin (IL-6). Using a bacterial expression system, we have synthesized a series of recombinant IL-6 mutants in which the constituent cysteines of the first (Cys45-Cys51), second (Cys74-Cys84), or both disulfide bonds of recombinant human interleukin-6 were replaced by other amino acids. Each mutant was partially purified and tested in four representative bioassays. While mutants lacking Cys45 and Cys51 retained activity similar to nonmutated recombinant IL-6, the activity of mutants lacking Cys74 and Cys84 was significantly reduced, especially in assays involving human cell lines. These results indicate that the first disulfide bond of human interleukin-6 is not required for maintenance of normal biologic activity. However, the fact that mutants lacking Cys45 and Cys51 were more active than corresponding cysteine-free mutants indicates that the disulfide bond formed by these residues contributes to biologic activity in the absence of the second disulfide bond. Competition binding studies with representative mutants indicate that their affinity for the human IL-6 receptor parallels their biologic activities on human cells.     

Location of intrachain disulfide bonds in the VP5* and VP8* trypsin cleavage fragments of the rhesus rotavirus spike protein VP4.

Because the rotavirus spike protein VP4 contains conserved Cys residues at positions 216, 318, 380, and 774 and, for many animal rotaviruses, also at position 203, we sought to determine whether disulfide bonds were structural elements of VP4. Electrophoretic analysis of untreated and trypsin-treated rhesus rotavirus (RRV) and simain rotavirus SA11 in the presence and absence of the reducing agent dithioerythritol revealed that VP4 and its cleavage fragments VP5* and VP8* possessed intrachain disulfide bonds. Given that the VP8* fragments of RRV and SA11 contain only two Cys residues, those at positions 203 and 216, these data indicated that these two residues were covalently linked. Electrophoretic examination of truncated species of VP4 and VP4 containing Cys-->Ser mutations synthesized in reticulocyte lysates provided additional evidence that Cys-203 and Cys-216 in VP8* of RRV were linked by a disulfide bridge. VP5* expressed in vitro was able to form a disulfide bond analogous to that in the VP5* fragment of trypsin-treated RRV. Analysis of a Cys-774-->Ser mutant of VP5* showed that, while it was able to form a disulfide bond, a Cys-318-->Ser mutant of VP5* was not. These results indicated that the VP4 component of all rotaviruses, except B223, contains a disulfide bond that links Cys-318 and Cys-380 in the VP5* region of the protein. This bond is located between the trypsin cleavage site and the putative fusion domain of VP4. Because human rotaviruses lack Cys-203 and, hence, unlike many animal rotaviruses cannot possess a disulfide bond in VP8*, it is apparent that VP4 is structurally variable in nature, with human rotaviruses generally containing one disulfide linkage and animal rotaviruses generally containing two such linkages. Considered with the results of anti-VP4 antibody mapping studies, the data suggest that the disulfide bond in VP5* exists within the 2G4 epitope and may be located at the distal end of the VP4 spike on rotavirus particles.     

Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1

Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194.     

The covalent structure of the elastase inhibitor from Anemonia sulcata--a "non-classical" Kazal-type protein

The amino-acid sequence of the proteinase inhibitor specific for elastases from the sea anemone Anemonia sulcata was determined from performic-acid oxidized inhibitor and from three cyanogen bromide fragments of reduced and carboxymethylated inhibitor. The molecule consists of a single polypeptide chain formed from 48 amino-acid residues and is stabilized by three intramolecular disulfide bridges. After cyanogen bromide cleavage of the native protein at methionines 10 and 28 followed by chymotryptic cleavage two fragments each containing a single disulfide bridge were isolated. These indicated the location of three intramolecular disulfide linkages between Cys4 and Cys34 (part of A-loop), Cys8 and Cys27 (B-loop) and Cys16 and Cys48 (C-loop). The sequential homology and the disulfide pattern identified the elastase inhibitor as a Kazal-type inhibitor in which, however, not only the CysI-CysII segment is rather short but interestingly the Cys4-Cys34 disulfide anchoring point (i.e. CysI-CysV) in the C-loop is shifted by one turn in the alpha-helical segment towards the C-terminus. Thus, the elastase inhibitor is a non-classical Kazal-type inhibitor with respect to the positioning of the half-cystines. The inhibitor molecule was modelled based on the known three-dimensional structure of the silver pheasant ovomucoid third domain. The shortened amino-terminal segment was arranged in such a manner to allow disulfide bridge formation between the first cysteine Cys4 and the replaced Cys34 under maintenance of a suitable binding loop conformation. The characteristic ovomucoid scaffold consisting of a central alpha-helix, an adjacent three-stranded beta-sheet and the proteinase-binding loop cross-connected through disulfide bridges CysI-CysV and CysIII-CysVI was conserved.     

Immunoglobulin E-binding site in Fc epsilon receptor (Fc epsilon RII/CD23) identified by homolog-scanning mutagenesis.

The IgE-binding site of the human low-affinity receptor for IgE (Fc epsilon RII/CD23) has previously been mapped to the extracellular domain between amino acid residues 160 and 287. We now have investigated which conformational epitope within this domain specifies the receptor-ligand interaction. The analysis of homolog-scanning mutants expressed in mammalian cells demonstrates that amino acid side chains that affect IgE binding are located in two discontinuous segments, between residues 165-190 and 224-256. The overall structure of the chimeric binding domains, as probed with 11 conformation-sensitive monoclonal antibodies, is generally not distorted, except by replacement of residues 165-183. In this region, disruption of binding function appears to be caused by global conformational constraints on the binding site. Substitution and deletion mutants demonstrate that six out of eight extracellular cysteines, Cys163, Cys174, Cys191, Cys259, Cys273, and Cys282, are necessary for IgE binding and are most likely involved in intramolecular disulfide bridges. We show that the Fc epsilon RII domain delineated by Cys163 and Cys282 encodes all the structural information required to form the IgE-binding site.     

Intermolecular cross-links mediate aggregation of phospholipid vesicles by pulmonary surfactant protein SP-A

As the most abundant glycoprotein component of pulmonary surfactant, SP-A (Mr = 30,000-36,000) plays a central role in the organization of phospholipid bilayers in the alveolar air space. SP-A, isolated from lung lavage, exists in oligomeric forms (N = 6, 12, 18, ...), mediated by collagen-like triple helices and intermolecular disulfide bonds. These protein-protein interactions, involving the amino-terminal domain of SP-A, are hypothesized to facilitate the alignment of surfactant lipid bilayers into unique tubular myelin structures. SP-A reorganization of surfactant lipid was assessed in vitro by quantitating the calcium-dependent light scattering properties of lipid vesicle suspensions induced by SP-A. Accelerated aggregation of unilamellar vesicles required SP-A and at least 3 mM free calcium. The initial rate of aggregation was proportional to the concentration of canine SP-A over lipid:protein molar ratios ranging from 200:1 to 5000:1. Digestion with bacterial collagenase or incubation with dithiothreitol (DTT) completely blocked lipid aggregation activity. Both treatments decreased the binding of SP-A to phospholipids. The conditions used in the DTT experiments (10 mM DTT, nondenaturing Tris buffer, 37 degrees C) resulted in the selective reduction and 14C-alkylation of the intermolecular disulfide bond involving residue 9Cys, whereas the four cysteines found in the noncollagenous domain of SP-A were inefficiently alkylated with [14C]-iodoacetate. HPLC analysis of tryptic SP-A peptides revealed that these four cysteine residues participate in intramolecular disulfide bond formation (138Cys-229Cys and 207Cys-221Cys). Our data demonstrate the importance of the quaternary structure (triple helix and intermolecular disulfide bond) of SP-A for the aggregation of unilamellar phospholipid vesicles.     

The structure of the murine Fc receptor for IgG. Assignment of intrachain disulfide bonds, identification of N-linked glycosylation sites, and evidence for a fourth form of Fc receptor

The Fc receptor (Fc gamma R) of the murine macrophage cell line, J774, was purified by immunoaffinity chromatography then subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis and amino-terminal sequencing. FcR material judged to be pure by these criteria was digested with a number of enzymes to identify the cysteine residues engaged in disulfide bonds within the native structure. The results clearly establish that the mouse macrophage Fc gamma R contains two intrachain disulfide bonds, each of which connects adjacent cysteine residues within the two putative extracellular domains of the molecule. In addition, each disulfide-bonded domain was shown to contain two authentic sites of N-linked glycosylation. Extensive peptide sequencing resulted in the unexpected identification of peptide fragments from a fourth Fc gamma R whose sequences were highly homologous to sequences surrounding the two Cys residues in the amino-terminal domain of both alpha and beta 1 Fc gamma R. The fourth Fc gamma R contains a disulfide-bonded amino-terminal domain similar to beta 1 Fc gamma R.     

Cysteine 116 participates in intermolecular bonding of the human VEGF(121) homodimer

VEGF(121), the 121-amino acid form of vascular endothelial growth factor is a homodimer with nine cysteine residues per monomer. While three intramolecular and two intermolecular disulfide bonds have been mapped, the state of the ninth cysteine, Cys116, is not known. In this study, we determined that human VEGF(121) contains a third interchain disulfide bond between Cys116 of each monomer. We also isolated a VEGF(121) variant with two extra cysteines bound to each Cys116. No evidence was found for the exsistence of Cys116 in the reduced state. In fact, selective reduction of the Cys116 interchain disulfide bond yielded an unstable VEGF(121) molecule, which reoxidized quickly. Biological activities of VEGF(121) Cys116 variants were assessed. The oxidative state of Cys116 has no effect on binding or proliferation activities but may be important for overall stability of the molecule.     

Attempt to map the receptor binding sites of human follicle-stimulating hormone using disulfide peptides of its beta-subunit indicates major involvement of the regions around disulfide bonds Cys28-Cys82 and Cys32-Cys84 in receptor binding of the hormone.

Follicle-stimulating hormone (FSH) is a heterodimeric glycoprotein hormone secreted by the anterior pituitary. It plays a very important role in folliculogenesis in females and is responsible for spermatogenesis in males. The alpha-subunit which is common within a species and the beta-subunit which is hormone-specific are held together by noncovalent association. This association is very essential for the biological activity of the hormone. Each of these subunits are highly cross-linked by disulfide bonds which appear to stabilize the tertiary structures required for the noncovalent association of the subunits to generate hormonal activity. This study was initiated to delineate the role of the disulfide bonds of hFSH beta in receptor binding of the hormone. Five intermolecular and one intramolecular disulfide peptides corresponding to the disulfide bonds found in hFSH beta were synthesized and screened along with their linear counterparts, for their ability to competitively inhibit the radiolabelled [125I]hFSH from binding to the FSH receptor containing membranes from the testis of immature rats. The disulfide peptides Cys28-Cys82 and Cys32-Cys84 were found to be the most potent in inhibiting radiolabelled hFSH from binding to its receptor. The results suggest the involvement of the regions around disulfide bonds Cys28-Cys82 and Cys32-Cys84 in receptor binding of the hormone. The studies also suggest the involvement of beta L2 and beta L3 loop regions in receptor binding of the hormone. This study is the first of its kind to use disulfide peptides rather than linear peptides to map the receptor binding regions of hFSH.     

Positions of disulfide bonds and N-glycosylation site in juvenile hormone binding protein

The juvenile hormone binding protein (JHBP) from Galleria mellonella hemolymph is a glycoprotein composed of 225 amino acid residues. It contains four Cys residues forming two disulfide bridges. In this study, the topography of the disulfide bonds as well as the site of glycan attachment in the JHBP molecule from G. mellonella was determined, using electrospray mass spectrometry. The MS analysis was performed on tryptic digests of JHBP. Our results show that the disulfide bridges link Cys10 and Cys17, and Cys151 and Cys195. Of the two potential N-glycosylation sites in JHBP, Asn4, and Asn94, only Asn94 is glycosylated. This site of glycosylation is also found in the fully biologically active recombinant JHBP expressed in the yeast Pichia pastoris.