Regulation of H2a-specific proteolysis by the histone H3:H4 tetramer

We have studied the limited cleavage of H2a in the H2a:H2b histone dimer by the H2a-specific protease under physiological conditions (neutral pH, 0.1 M NaCl) using a variety of histone-DNA reconstitutes as substrates and/or regulators of the partially purified enzyme. Under these conditions the protease cleaves H2a in "native" dimer-DNA reconstitutes but not in "native" octamer-DNA reconstitutes. Treatment of the enzyme with saturating amounts of H3:H4 tetramer-DNA prior to addition of dimer-DNA substrate results in complete inhibition of H2a-specific proteolysis. Sucrose gradient sedimentation experiments indicate that the protease binds reversibly to tetramer-DNA and that this leads to the reversible inhibition of enzymatic activity. Using three different tetramer-DNA complexes, we found native tetramer-DNA to be a more effective inhibitor than either trypsin-treated tetramer-DNA or acetylated tetramer-DNA. We conclude that under physiological conditions, the H2a-specific protease binds primarily to the highly basic amino-terminal domain of the H3:H4 tetramer, and this binding lowers the effective concentration of enzyme available to cleave H2a. Although no cleaved H2a is produced when protease is mixed with native octamer-DNA, incubation of the enzyme with acetylated octamer-DNA results in H2a-specific proteolysis. This is the first demonstration that the H2a-specific protease activity can be modulated by a physiologically relevant process (e.g. histone acetylation). We propose that the sequestered protease may be functionally regulated in vivo through reversible post-translational modifications to the NH2-terminal domains of the histone H3:H4 tetramer.     

Integration of the barley genetic and seed proteome maps for chromosome 1H, 2H, 3H, 5H and 7H

Two-dimensional gel electrophoresis was used to screen spring barley cultivars for differences in seed protein profiles. In parallel, 72 microsatellite (simple sequence repeat (SSR)) markers and 11 malting quality parameters were analysed for each cultivar. Over 60 protein spots displayed cultivar variation, including peroxidases, serpins and proteins with unknown functions. Cultivars were clustered based on the spot variation matrix. Cultivars with superior malting quality grouped together, indicating malting quality to be more closely correlated with seed proteomes than with SSR profiles. Mass spectrometry showed that some spot variations were caused by amino acid differences encoded by single nucleotide polymorphisms (SNPs). Coding SNPs were validated by mass spectrometry, expressed sequence tag and 2D gel data. Coding SNPs can alter function of affected proteins and may thus represent a link between cultivar traits, proteome and genome. Proteome analysis of doubled haploid lines derived from a cross between a malting (Scarlett) and a feed cultivar (Meltan) enabled genetic localisation of protein phenotypes represented by 48 spot variations, involving e.g. peroxidases, serpins, α-amylase/trypsin inhibitors, peroxiredoxin and a small heat shock protein, in relation to markers on the chromosome map. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Phylogenetic analysis of the core histones H2A, H2B, H3, and H4.

Despite the ubiquity of histones in eukaryotes and their important role in determining the structure and function of chromatin, no detailed studies of the evolution of the histones have been reported. We have constructed phylogenetic trees for the core histones H2A, H2B, H3, and H4. Histones which form dimers (H2A/H2B and H3/H4) have very similar trees and appear to have co-evolved, with the exception of the divergent sea urchin testis H2Bs, for which no corresponding divergent H2As have been identified. The trees for H2A and H2B also support the theory that animals and fungi have a common ancestor. H3 and H4 are 10-fold less divergent than H2A and H2B. Three evolutionary histories are observed for histone variants. H2A.F/Z-type variants arose once early in evolution, while H2A.X variants arose separately, during the evolution of multicellular animals. H3.3-type variants have arisen in multiple independent events.     

Studies in vitro on the effects of 1H,2H,4H(5H)-octafluorocyclohexane and 1H,4H(2H)-nonafluorocyclohexane on enzymes and organelles

A comparison has been made of the effect of 1H,2H,4H(5H)-octafluorocyclohexane, which is highly toxic (LD(50) 17mg./kg. in rats), and of 1H,4H(2H)-nonafluorocyclohexane, which is relatively non-toxic (LD(50)>440mg./kg. in rats), on the respiration of rat liver homogenates and mitochondria in vitro. 1H,2H,4H(5H)-Octafluorocyclohexane strongly inhibited the respiration of both homogenates and mitochondria, but neither compound had any significant effect on glycolysis or on glutamate dehydrogenase or NADH-cytochrome c reductase activity. 1H,2H,4H(5H)-Octafluorocyclohexane, however, caused a very marked inhibition of cytochrome oxidase activity, causing an almost complete lesion in this region of the respiratory chain. 1H,4H(2H)-Nonafluorocyclohexane was without effect in this respect. A marked decrease in turbidity of mitochondrial suspensions at 520nm. was caused by addition of both compounds, the effect being greater with 1H,2H,4H(5H)-octafluorocyclohexane. ATP, Mg(2+) and bovine serum albumin did not reverse these changes. Mitochondrial adenosine triphosphatase activity was increased twofold by the toxic compound, but only slightly by the non-toxic compound. Electron-microscopic examination of mitochondria treated with 1H,2H,4H(5H)-octafluorocyclohexane revealed gross morphological damage, whereas the effect of 1H,4H(2H)-nonafluorocyclohexane appeared to be merely to cause swelling. The results obtained account, to some extent at any rate, for the toxic effects of 1H,2H,4H(5H)-octafluorocyclohexane.     

Distribution of the core histones H2A.H2B.H3 and H4 during cell replication.

The distribution of newly synthesized core histones H2A, H2B, H3 and H4 relative to the DNA strand synthesized in the same generation has been examined in replicating Chinese Hamster ovary cells. Cells are grown for one generation in [14C]-lysine and thymidine, and then for one generation in [3H]-lysine and 5-bromodeoxyuridine (BrUdRib) and a further generation in unlabeled lysine and thymidine. This protocol produces equal amounts of unifilarly substituted and unsubstituted DNA. Monomer nucleosomes isolated from chromatin containing these two types of DNA can be distinguished by crosslinking with formaldehyde and banding to equilibrium in CsCl density gradients. The results indicate that the core histones are equally distributed between the two types of DNA. These findings are discussed in terms of current models for chromatin replication; they do not support any long term association of newly replicated histones with either the leading or lagging side of the replication fork.     

Characterization of the H1.5 gene completes the set of human H1 subtype genes

The H1 histone family in mammals contains at least seven subtypes. In the past we have isolated six of the seven genes encoding these isoforms. To complete the set of the human H1 histone genes, we have designed two PCR primers deduced from a partially published sequence of the remaining histone H1 gene [Carozzi et al. (1984)Science 224, 1115–1118] and from a consensus sequence which we have derived from the conserved region of human histone H1 genes. Using these primers we have amplified a 417-bp DNA fragment from total human DNA. This fragment was used for screening a human phage genomic library. Two overlapping clones were isolated. The region contains a set of 5 genes representing each of the five histone classes. In continuation of our numbering of human H1 genes, we have named this H1 gene H1.5. This gene encodes a protein almost identical to the previously published protein sequence designated H1a [Ohe et al. (1986)J. Biochem. 100, 359–368]; since the changes are in a region of some uncertainty of the peptide sequencing, we conclude that the newly isolated gene codes for the H1a protein. The structures of the flanking regions of the genes except the H2B gene are typical for histone genes. They include: (1) a CCAAT element in the promotor region, (2) a TATA box and (3) a palindromic termination element. The H2B sequence shows no typical regulatory elements and no complete ORF, therefore we consider it as a pseudogene. The expression of the H1.5 gene was examined in several cell lines.     

Isolation of the gene for the testis-specific H1 histone variant H1t

H1t is a testis-specific H1 variant found in pachytene spermatocytes and round spermatids of mammals. The H1t gene was isolated from the Sargent-Bonner library of recombinant lambda bacteriophage containing EcoRI fragments of rat liver DNA using a hybridization probe derived from a chicken H1 variant. The rat H1t gene encodes a 207-amino acid protein (ignoring the initiating methionine) that matches perfectly what is known of the sequence and composition of H1t isolated from rat testes. The gene lacks introns and has good matches to all the consensus sequences known to lie upstream from a variety of H1 genes from diverse organisms. It also has the standard downstream palindromic sequence that specifies the 3'-end of most histone messages. Accordingly, the features of the gene or its environs that restrict its expression to a particular phase of spermatogenesis are not yet evident.     

Role of histone pairs H2A,H2B and H3,H4 in the self-assembly of nucleosome core particles

The role of the histone pairs H2A,H2B and H3,H4 in the kinetics of core particle formation was investigated by using N-(1-pyrene)maleimide-labeled histone H3. The excimer emission intensity of a DNA-core histone complex prepared by direct mixing of DNA and histones in 0.2 m-NaCl is reduced by half when H2A,H2B is omitted. Fluorescence quenching studies and lifetime measurements indicate that the emission differences are probably due to static quenching. In a correctly folded nucleosome or a DNA-(H3,H4) complex, the two pyrene rings are buried and are held very close. DNA-(H3,H4) can interact with additional copies of H3,H4, but only when two dimers of H2A,H2B are correctly bound is there a specific twofold increase in excimer emission.The kinetics of the reaction of H3,H4 with DNA in 0.2 m-NaCl were followed by measuring the increase in 460 nm fluorescence. The apparent rate constant of the dominant kinetic component is ~ 2 × 10^?1 s^?1. If histones H2A,H2B are added immediately after the preparation of the DNA-(H3,H4) complex, an increase in excimer fluorescence is observed, with an apparent rate constant of ~ 6 × 10^?3 s^?1. However, if histones H2A,H2B are added one hour after DNA-(H3,H4) complex formation, there is no increase in excimer fluorescence. These results suggest that an intermediate involving the H3,H4 tetramer is formed first in nucleosome assembly. In the presence of H2A,H2B, this intermediate evolves to the final folded nucleosome, but in the absence of H2A,H2B it rearranges to an unmaturable dead-end complex. Additional experiments show that a very fast transfer of histone pairs (probably H2A,H2B) can take place between partially reconstituted nucleosomes.     

Mutational analysis of the stability of the H2A and H2B histone monomers

The eukaryotic histone heterodimer H2A-H2B folds through an obligatory dimeric intermediate that forms in a nearly diffusion-limited association reaction in the stopped-flow dead time. It is unclear whether there is partial folding of the isolated monomers before association. To address the possible contributions of structure in the monomers to the rapid association, we characterized H2A and H2B monomers in the absence of their heterodimeric partner. By far-UV circular dichroism, the H2A and H2B monomers are 15% and 31% helical, respectively—significantly less than observed in X-ray crystal structures. Acrylamide quenching of the intrinsic Tyr fluorescence was indicative of tertiary structure. The H2A and H2B monomers exhibit free energies of unfolding of 2.5 and 2.9 kcal mol^− 1, respectively; at 10 μM, the sum of the stability of the monomers is ∼ 60% of the stability of the native dimer. The helical content, stability, and m values indicate that H2B has a more stable, compact structure than H2A. The monomer m values are larger than expected for the extended histone fold motif, suggesting that the monomers adopt an overly collapsed structure. Stopped-flow refolding—initiated from urea-denatured monomers or the partially folded monomers populated at low denaturant concentrations—yielded essentially identical rates, indicating that monomer folding is productive in the rapid association and folding of the heterodimer. A series of Ala and Gly mutations were introduced into H2A and H2B to probe the importance of helix propensity on the structure and stability of the monomers. The mutational studies show that the central α-helix of the histone fold, which makes extensive intermonomer contacts, is structured in H2B but only partially folded in H2A.     

Peculiarities of histones H1, H2b and H4 structure and aggregation in the presence of glycine

The efficiency of intramolecular and intermolecular interactions of histons H1, H2b and H4 was studied as affected by the glycine concentration in the composition of the glycine-HCl buffer (pH 3.0). It is shown that the concentration of glycine less than 0.01m should be used in experiments with the glycine buffer. Glycine in a higher concentration evokes a considerable aggregation of the histon molecules. Sizes and shape of the aggregates differ in solutions with the lower and high ionic strength. In the presence of glycine the sizes of histone aggregates decrease in the series H1 greater than H2b greater than H4. Changes in the quantum yield of histon fluorescence reflect changes in the tertiary structure of their molecule but not in aggregation.     

Identification of a dual histamine H1/H3 receptor ligand based on the H1 antagonist chlorpheniramine

Combining the first generation H(1) antihistamine chlorpheniramine (1) with H(3) ligands of the alkylamine type has led to the identification of compound 9d, a dual ligand of both the H(1) and H(3) receptors.     

Footprinting of linker histones H5 and H1 on the nucleosome.

DNase I has been used to footprint the linker histones H5 and H1 on the nucleosome of chicken erythrocyte chromatin. Rate constants have been derived for digestion at the principal sites of attack on chromatosome length DNA (168 bp), located about 10 bp apart, and compared with those observed for linker histone-depleted chromatosomes. Complete protection was found for site S7 on the dyad axis and decreasing partial protection seen at symmetrically positioned sites on each side of S7. Strong, but not complete protection was noted at S14, the site corresponding to the end of the core particle, situated less than 1/4 of a turn away from the dyad. Uniform partial protection was observed for sites S2, S3, S4 and S10, S12 on the far side of the chromatosome. The simplest interpretation of these results is that the globular domain of H5/H1 is responsible for the protection at S7, whilst extended N- and C-domains give rise to the partial protection at sites away from the dyad axis.     

Characterization of six flagellin genes in the H3, H53 and H54 standard strains of Escherichia coli

Six flagellin genes in three H standard Escherichia coli strains for H3, H53 and H54 were characterized. Each strain has two flagellin genes, one of which is expressed as its standard H antigen. A pair of flagellin genes flkA3 (encoding for H3 antigen) and fliC16 (H16) was cloned from Bi7327-41, flkA53 (H53) and fliC-53 from E480-68, and flmA54 (H54) and fliC-54 from E223-69. Two fliC genes, fliC-53 and fliC-54, are nonfunctional owing to the insertions of IS1 and IS1222, respectively. The flkA and flmA regions are located in the 3' end of the rnpB gene and near the nlpA gene, respectively. Each of them is followed by a gene homologous to fljA, which is known to repress the expression of fliC(i) in Salmonella enterica serovar Typhimurium. These results suggest that they are derived from the same origin of the fljBA operon. However, these regions contain neither the hin gene nor the invertible H segment. The four flagellin genes, fliC16, flkA3, flkA53 and flmA54, share high homology in nucleotide and amino-acid sequences with one another and with the S. enterica serovar Typhimurium flagellin genes. The promoter sequence of fliC16 is homologous to that of fliC(i), whereas the promoter sequences of flkA and flmA are homologous to that of fljB. The terminator sequences of the fliC16, fliC-53 and fliC-54 genes are conserved among themselves and identical with that of the E. coli fliC48 gene. Three FljA repressors, FljA3, FljA53 and FljA54, are homologous highly with one another and moderately with FljA of Salmonella. These results indicate that six flagellin genes analyzed are markedly similar to the Salmonella flagellin genes, suggesting their lateral transfer from Salmonella.     

Alpha-helix in the carboxy-terminal domains of histones H1 and H5.

Although the carboxy-terminal domains of histones H1 and H5 exist as random-coil in aqueous solution, secondary structure prediction suggests that this region has a high potential for alpha-helix formation. We have measured CD spectra in various conditions known to stabilize alpha-helices, to determine whether this potential can be realized in an appropriate environment. Trifluoroethanol increases the helix contents of H1, H5 and their carboxy-terminal fragments, presumably through promotion of axial hydrogen bonding. Sodium perchlorate is also effective and better than sodium chloride, suggesting stabilization by binding of bulky perchlorate ions rather than simple charge screening. Extrapolating from these measurements in solution, and taking into account the occurrence of proline residues throughout the carboxy-terminal domain, we propose that binding to DNA stabilizes helical segments in the carboxy-terminal domains of histones H1 and H5, and that it is this structured form of the domain that is functionally important in chromatin.     

Regulation of the higher-order structure of chromatin by histones H1 and H5

Chicken erythrocyte chromatins containing a single species of linker histone, H1 or H5, have been prepared, using reassembly techniques developed previously. The reconstituted complexes possess the conformation of native chicken erythrocyte chromatin, as judged by chemical and structural criteria; saturation is reached when two molecules of linker histone are bound per nucleosome, as in native erythrocyte chromatin, which the resulting material resembles in its appearance in the electron microscope and quantitatively in its linear condensation factor relative to free DNA. The periodicity of micrococcal nuclease-sensitive sites in the linker regions associated with histone H1 or H5 is 10.4 base pairs, suggesting that the spatial organization of the linker region in the higher-order structure of chromatin is similar to that in isolated nucleosomes. The susceptible sites are cut at differing frequencies, as previously found for the nucleosome cores, leading to a characteristic distribution of intensities in the digests. The scission frequency of sites in the linker DNA depends additionally on the identity of the linker histone, suggesting that the higher-order structure is subject to secondary modulation by the associated histones.     

Antibody CDR H3 modeling rules: extension for the case of absence of Arg H94 and Asp H101

The third complementary determining region of the immunoglobulin heavy chain (CDR H3) is one of the more difficult structures to model due to genetic reasons. However, the conformation of proximal to beta-framework ("torso") part of the CDR H3 is very predictable. Current "CDR's canonical classes" theory is based on identifying the key positions, H94 and H101. We can determine the CDR H3 "torso" structure if arginine or lysine is present in the H94 position and/or aspartic acid in the H101 position. We target the case characterized by the absence of key residues in both the H94 and H101 positions. There has not been discussion on this case in the literature. 51 CDR H3 structures of this nature are analyzed and we established new sequence-structure rules. These rules contribute to more accurate modeling of the antibody's structure.