Analysis of Tn916-induced mutants ofClostridium acetobutylicum altered in solventogenesis and sporulation

Summary The conjugative transposon Tn916 was used for mutagenesis ofClostridium acetobutylicum ATCC 824. Tetracycline-resistant mutants were screened for loss of granulose synthesis and five classes of granulose mutants, that contained single transposon insertions, were identified on the basis of altered solvent production. Class 1 mutants did not make acetone or butanol, lacked activity of enzymes induced during solventogenesis, and did not sporulate, indicating that they are regulatory mutants. The class 2 mutant strains also did not produce acetone but did form small amounts of butanol and ethanol while the class 3 mutants produced low amounts of all solvents. Class 4 and 5 mutants produced essentially the same or higher amounts of solvents than the parent strain. Transposon insertions in the class 1 mutants were used as markers for in vitro synthesis of flanking chromosomal DNA using Tn916-specific primers. The DNA fragments were labeled to produce specific probes. Transposon insertion sites in the chromosomes of 13 different class 1 regulatory mutants were compared by hybridization of the specific probes to Southern blots of restriction endonuclease-digested parental chromosomal DNA. Insertions in two mutants appeared to be, in the same region of the chromosome. These results predict, that multiple regulatory elements are required to induce solvent production and sporulation.     

Conjugal transfer and expression of streptococcal transposons in Clostridium acetobutylicum

The transposon-containing streptococcal plasmids pAM211, pCF10, and pINY1275 have been transferred at high frequency (10^-2–10^-3 per recipient, selecting for tetracycline resistance) to the Gram-positive anaerobe Clostridium acetobutylicum. Selection in the presence of two antibiotics (tetracycline and erythromycin) with the plasmids pAM 180 and pINY1275 yielded only low numbers of transconjugants (10^-8 per recipient). Matings were done by combining liquid and filter mating procedures under anaerobic conditions. No plasmid DNA could be detected in the transconjugants selected on a minimal medium in the presence of tetracycline. DNA-DNA hybridization experiments with restricted chromosomal DNA using biotinylated pAM120::Tn916 as probe revealed the presence of homologous sequences in the transconjugants but not in Clostridium acetobutylicum wild type. The transconjugants were used as donors in mating experiments with tetracycline-sensitive Bacillus subtilis and Streptococcus lactis subspec. diacetylactis. In both cases tetracycline-resistant strains were found. Transfer frequencies in these experiments were less than 10^-7 per recipient.     

The internal pH of Clostridium acetobutylicum and its effect on the shift from acid to solvent formation

Clostridium acetobutylicum was unable to keep a constant pH inside the cells when grown on a phosphatelimited synthetic medium which allowed production of organic acids in a first phase and of solvents in a second phase. At external pH values between 5.9 and 4.3, the cells kept a constant pH of 0.9 to 1.3. A similar pH was measured in continuous culture under solventproducing conditions. The pH was abolished by protonovorous uncouplers, such as tetrachlorosalicylanilide (TCS) or carbonyl-p-trifluormethoxyphenylhydrazone (FCCP). n-Butanol at concentration of 150 mM and above led also to a complete abolition of the pH gradient.The internal pH stayed above 5.5 in cultures that shifted from acid to solvent formation. It is concluded that this is a prerequisite for the shift. The possible function of high internal concentrations of butyrate, butyryl phosphate and butyryl coenzyme A in the triggering mechanisms of the shift is discussed.Abbreviations TCS Tetrachlorosalicylanilide - FCCP carbonyl-p-trifluormethyoxyphenylhydrazone     

Sequences affecting the regulation of solvent production in<Emphasis Type="Italic"> Clostridium acetobutylicum</Emphasis>

The high solvent phenotype of Clostridium acetobutylicum mutants B and H was complemented by the introduction of a plasmid that contains either an intact or partially-deleted copy of solR, restoring acetone and butanol production to wild-type levels. This demonstrates that the solR open reading frame on pSOLThi is not required to restore solvent levels. The promoter region upstream of alcohol dehydrogense E (adhE) was examined in efforts to identify sites that play major roles in the control of expression. A series of adhE promoter fragments was constructed and the expression of each in acid- and solvent-phases of growth was analyzed using a chloramphenicol acetyl-transferase reporter system. Our results show that a region beyond the 0A box is needed for full induction of the promoter. Additionally, we show that the presence of sequences around a possible processing site designated S2 may have a negative role in the regulation of adhE expression.     

Transfer of Tn916 and Tn916ΔE into Clostridium difficile: demonstration of a hot-spot for these elements in the C. difficile genome

The conjugative transposon Tn916 and a derivative Tn916 delta E was transferred from Bacillus subtilis into Clostridium difficile CD37 by filter mating. All the C. difficile transconjugants appeared to contain one copy of the transposon integrated into the same position in the genome. Transposition from the original site of integration was not observed. Like Tn916 the transferable tetracycline resistance determinant (Tc-CD) of C. difficile has a preferred site of integration in C. difficile and is homologous with Tn916 along the whole length of Tn916. However comparisons of the distribution of TaqI and Sau3AI sites in the homologous regions of the two elements did not demonstrate any hybridizing fragments in common.     

The effect of novobiocin on solvent production byClostridium acetobutylicum

Cells ofClostridium acetobutylicum treated with novobiocin, a DNA gyrase inhibitor, produced higher butyrate levels and lower solvent levels with acetone being the most affected. Seven enzyme activities involved in acid and solvent production were analyzed. Among them, only CoA transferase, required for acetone formation and acid uptake, experienced a significant decrease in activity. As inEscherichia coli andBacillus subtilis, DNA fromC. acetobutylicum became less negatively supercoiled in the early stationary phase (solventogenic stage), as shown by analysis of linking number of a reporter plasmid by agarose gel electrophoresis in the presence of chloroquine.     

Novel alk-1-enyl ether lipids isolated from Clostridium acetobutylicum

Alkenyl ether analogues of phosphatidylglycerol (plasmenylglycerol), bisphosphatidylglycerol (cardiolipin) (plasmenylglycerolphosphatidic acid), monoglycosyldiglyceride and diglycosyldiglyceride were isolated from the polar lipids of Clostridium acetobutylicum and characterized by chemical analyses and degradation. The position of the alkenyl ether bond (at C-1) and of the acyl ester bond (at C-2) as well as the configuration at C-2 of the phospholipids are the same as of the alkenyl ether phospholipids known so far. The alkenyl ether analogue of monoglycosyldiglyceride contains a galactosyl residue, that of diglycosyldiglyceride a glucosyl-galactosyl residue, glucosyl forming the terminal unit.     

Effect of carbohydrate source on alpha-amylase and glucoamylase formation byClostridium acetobutylicum SA-1

Summary An examination into the effect of different carbohydrate sources indicated that the production of extracellular alpha-amylase and glucoamylase was under similar biosynthetic control inClostridium acetobutylicum SA-1. Cell-associated starch-hydrolytic enzymes may be more important than extracellular enzymes in the processing of the starch molecule.     

Purification and characterization of the pyruvate-ferredoxin oxidoreductase from Clostridium acetobutylicum

The pyruvate-ferredoxin oxidoreductase from Clostridium acetobutylicum was purified to homogeneity and partially characterized. A 9.2-fold purification was achieved in a three step purification procedure: ammonium sulfate fractionation, chromatography on Phenyl Sepharose and on Procion Blue H-EGN12. The pure enzyme exhibited a specfic activity of 25 U/mg of protein. Homogeneity of the pyruvate-ferredoxin oxidoreductase was confirmed by native polyacrylamide gel electrophoresis and sodium dodecylsulfate (SDS)-polyacrylamide gel electrophoresis. The molecular weight was determined to be 123,000/monomer. The subunit composition of the native enzyme could not be determined because of the instability of the pure enzyme. The pyruvate-ferredoxin oxidoreductase is sensitive to oxygen and dilution during purification. The dilution inactivation could be partially overcome by the addition of 300 M coenzyme A or 50% ethyleneglycol. A thiamine pyrophosphate content of 0.39 mol per mol of enzyme monomer was found, the iron and sulfur content was 4.23 and 0.91, respectively. The pH-optimum was at pH 7.5 and the temperature optimum was at 60°C. Kinetic constants were measured in the forward reaction. The apparent K _m for pyruvate and coenzyme A were 322 M and 3.7 M, respectively. With 2-ketobutyrate the pyruvate-ferredoxin oxidoreductase showed 12.5% of the activity compared to pyruvate. No activity was found with 2-ketoglutarate. Ferredoxin from Clostridium pasteurianum could be used as physiological electron acceptor.Non-standard abbreviations NAD(H) nicotinamide adenine dinucleotide (reduced) - NADP(H) nicotinamide adenine dinucleotide phosphate (reduced) - DTE dithioerythritol - PMS phenazine methosulfate - NBT nitro blue tetrazolium chloride - DMSO dimethyl sulfoxide - DCPIP dichlorophenolindophenol - MTT 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyl-tetrazolium bromide - TTC triphenyltetrazolium chloride - FAD flavin adenine dinucleotide - FMN flavin mononucleotide     

Effect of biomass concentration on the specific solvent productivity ofClostridium acetobutylicum in chemostat culture

Summary Using a defined medium in chemostat culture, an inverse relationship between the biomass concentration and the specific butanol productivity has been observed. It is suggested that this is due to the cell population not being homogeneous, and that a change in the nutrient balance leads to a cha in the relative proportions of acidogenic, solventogenic and inert cells (spores).     

Treatment with allyl alcohol selects specifically for mutants of Clostridium acetobutylicum defective in butanol synthesis

Abstract Treatment of Clostridium acetobutylicum with allyl alcohol allowed the selection of mutants which were unable to produce n -butanol, whereas the synthesis of acetone and ethanol was unaffected. Enzymatic investigations revealed that all mutant strains were devoid of butyraldehyde dehydrogenase or showed a very low activity of this enzyme as compared to the wild type.     

Tn10 transposase mutants with altered transpososome unfolding properties are defective in hairpin formation

Transposition reactions take place in the context of higher-order protein-DNA complexes called transpososomes. In the Tn10 transpososome, IHF binding to an "outside end" creates a bend in the DNA that allows the transposase protein to contact the end at two different sites, the terminal and subterminal binding sites. Presumably this helps to stabilize the transposase-end interaction. However, the DNA loop that is formed must be unfolded at a later stage in order for the transposon to integrate into other DNA molecules. It has been proposed that transpososome unfolding also plays a role in transposon excision. To investigate this possibility further, we have isolated and characterized transposase mutants with altered transpososome unfolding properties. Two such mutants were identified, R182A and R184A. Both mutants fail to carry out hairpin formation, an intermediate step in transposon excision, specifically with outside end-containing substrates. These results support the idea that transpososome unfolding and excision are linked. Also, based on the importance of residues R182 and R184 in transpososome unfolding, we propose a new model for the Tn10 transpososome, wherein both DNA ends of the transpososome make subterminal contacts with transposase.     

Continuous cultures of Clostridium acetobutylicum: culture stability and low-grade glycerol utilisation

Continuous cultures of two strains of Clostridium acetobutylicum were stable for over 70 d when grown on glucose/glycerol mixtures. Butanol was the major fermentation end-product, accounting for 43 to 62% (w/w) of total products. Low-grade glycerol [65% (w/v) purity] could replace commercial glycerol [87% (w/v) purity], leading to a similar fermentation pattern: a butanol yield of 0.34 (mol/mol), a butanol productivity of 0.42 g l^–1 h^–1 and a 84% (w/w) glycerol consumption were attained when cultures were grown at pH 6 and D = 0.05 h^–1; butanol accounted for 94% (w/w) of total solvents. These values are among the highest reported in literature for C. acetobutylicum simple chemostats.     

Characterization of thermostable Xyn10A enzyme from mesophilic Clostridium acetobutylicum ATCC 824

A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60°C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.     

Cloning of Clostridium acetobutylicum genes and their expression in Escherichia coli and Bacillus subtilis

Summary DNA from Clostridium acetobutylicum ABKn8 was partially digested with Sau3A and the fragments obtained were inserted into the unique BamHI site of the cloning vector pHV33. The recombinant plasmids were used to transform Escherichia coli HB101 with selection for ampicillin resistance. A collection of ampicillin-resistant, tetracycline-sensitive clones representative of the Clostridium acetobutylicum genome was made. The clones were shown to carry recombinant plasmids each containing an insert of 2 to 16 kb in size. Several of them complemented the HB101 proA2 or leuB6 auxotrophic mutations. The cloned sequences were shown by Southern blot hybridization to be homologous to the corresponding ABKn8 DNA fragments.     

Influence of acetic and butyric acid addition on polysaccharide formation byClostridium acetobutylicum

Summary The production of granulose (an intracellular reserve polygranule), capsule and exopolysaccharide was investigated in a synthetic medium in which the oxido-reduction level was modified by the addition of acetic or butyric acid. After addition of the acids, granulose synthesis increased from 150 to 300 mg glucose equivalents ·1^–1 and capsular synthesis decreased by 25%. Exopolysaccharide production was unchanged under these conditions. A hypothesis that attributes a role to the polymer in the oxido-reduction sequences is discussed.     

Regeneration of cells from protoplasts ofClostridium acetobutylicum B643

Summary Conditions that allow regeneration of cells fromClostridium acetobutylicum strain B643 protoplasts were studied. Protoplast formation and stabilization in minimal media with 50 mM CaCl₂, 50 mM MgCl₂ and 0.3 M sucrose were crucial to subsequent regeneration on soft yeast extract agar containing 25 mM CaCl₂ and 25 mM MgCl₂. A regeneration frequency of 8–25% was consistently obtained.     

Multiple copies of functional, Tet(M)-encoding Tn916-like elements in a clinical Enterococcus faecium isolate

Tn916 and similar elements are very common in clinical enterococcal isolates, and are responsible for transmission of a variety of resistance determinants. It is commonly assumed that clinical strains carrying Tn916 have a single copy, although the actual number of copies in clinical isolates has never been systematically studied. We report a clinical isolate of Enterococcus faecium in which three distinct and excision-proficient copies of Tn916-like elements are present in the genome. All of the elements contain tet(M) genes, at least one of which confers resistance to tetracycline and minocycline. Two elements (Tn6085a, Tn6085b) are indistinguishable, containing an inserted 2758 bp Group II intron at the start of open reading frame Tn916ORF_06. The third (Tn6084) also contains the intron, but also has an ISEfa11 integrated upstream of tet(M). All three copies are able to excise from plasmid vectors when cloned in E. coli, and at least two of the elements can transfer to an E. faecium recipient strain. These data indicate that nearly identical Tn916-like elements encoding Tet(M)-mediated tetracycline/minocycline resistance can coexist in clinical E. faecium isolates.