Degeneration of a homing endonuclease and its target sequence in a wild yeast strain

Mobile introns and inteins self-propagate by ‘homing’, a gene conversion process initiated by site-specific homing endonucleases. The VMA intein, which encodes the PI-SceI endonuclease in Saccharomyces cerevisiae, is present in several different yeast strains. Surprisingly, a wild wine yeast (DH1-1A) contains not only the intein⁺ allele, but also an inteinless allele that has not undergone gene conversion. To elucidate how these two alleles co-exist, we characterized the endonuclease encoded by the DH1-1A intein⁺ allele and the target site in the intein^– allele. Sequence analysis reveals seven mutations in the 31 bp recognition sequence, none of which occurs at positions that are individually critical for activity. However, binding and cleavage of the sequence by PI-SceI is reduced 10-fold compared to the S.cerevisiae target. The PI-SceI analog encoded by the DH1-1A intein⁺ allele contains 11 mutations at residues in the endonuclease and protein splicing domains. None affects protein splicing, but one, a R417Q substitution, accounts for most of the decrease in DNA cleavage and DNA binding activity of the DH1-1A protein. Loss of activity in the DH1-1A endonuclease and target site provides one explanation for co-existence of the intein⁺ and intein^– alleles.     

High resolution crystal structure of domain I of the Saccharomyces cerevisiae homing endonuclease PI-SceI

The homing endonuclease PI-SceI from Saccharo myces cerevisiae consists of two domains. The protein splicing domain I catalyzes the excision of the mature endonuclease (intein) from a precursor protein and the religation of the flanking amino acid sequences (exteins) to a functional protein. Furthermore, domain I is involved in binding and recognition of the specific DNA substrate. Domain II of PI-SceI, the endonuclease domain, which is structurally homologous to other homing endonucleases from the LAGLIDADG family, harbors the endonucleolytic center of PI-SceI, which in vivo initiates the homing process by introducing a double-strand cut in the ~35 bp recognition sequence. At 1.35 Å resolution, the crystal structure of PI-SceI domain I provides a detailed view of the part of the protein that is responsible for tight and specific DNA binding. A geometry-based docking of the 75° bent recognition sequence to the full-length protein implies a conformational change or hinge movement of a subdomain of domain I, the tongs part, that is predicted to reach into the major groove near base pairs +16 to +18.     

Investigating the endonuclease activity of four Pyrococcus abyssi inteins

Among the 14 inteins of the Pyrococcus abyssi genome, 10 harbour the LAGLIDADG motifs of dodecapeptide endonucleases. Four of these were cloned, expressed in Escherichia coli and purified to assay their potential endonuclease activity. PabRIR1-2 and PabRIR1-3 are specific endonucleases, named PI-PabI and PI-PabII, respectively, cleaving the sequence spanning their homing site. This is consistent with their size and with the relative positions and sequences of their endonuclease motifs. However, PI-PabI is 10-fold more active than PI-PabII and a discrepancy of the DNA recognition and cleavage mechanisms was observed between the two inteins. In particular, analysis of the DNA cleavage reactions by MALDI-TOF highlighted that while the cleavage of DNA by PI-PabI consists of two steps corresponding to the cleavage of each DNA strand, PI-PabII processes the two DNA strands simultaneously. Furthermore, the two inteins interact differently with DNA. In addition, we did not detect any endonuclease activity for PabLon and PabRIR1-1. Deletions in the intein sequences and mutations in the putative endonuclease motifs probably abolish this activity. Hence, inteins from the same archaebacteria, even if contained in the same host protein, did not evolve uniformly and are presumably at different stages of the invasion cycle.     

Mycobacterium tuberculosis RecA intein possesses a novel ATP-dependent site-specific double-stranded DNA endonuclease activity

Mycobacterium tuberculosis recA harbors an intervening sequence in its open reading frame, presumed to encode an endonuclease (PI-MtuI) required for intein homing in inteinless recA allele. Although the protein-splicing ability of PI-MtuI has been characterized, the identification of its putative endonuclease activity has remained elusive. To investigate whether PI-MtuI possesses endonuclease activity, recA intervening sequence was cloned, overexpressed, and purified to homogeneity. Here we show that PI-MtuI bound both single- and double-stranded DNA with similar affinity but failed to cleave DNA in the absence of cofactors. Significantly, PI-MtuI nicked supercoiled DNA in the presence of alternative cofactors but required both Mn(2+) and ATP to generate linear double-stranded DNA. We observed that PI-MtuI was able to inflict a staggered double-strand break 24 bp upstream of the insertion site in the inteinless recA allele. Similar to a few homing endonucleases, DNA cleavage by PI-MtuI was specific with an exceptionally long cleavage site spanning 22 bp. The kinetic mechanism of PI-MtuI promoted cleavage supports a sequential rather than concerted pathway of strand cleavage with the formation of nicked double-stranded DNA as an intermediate. Together, these results reveal that RecA intein is a novel Mn(2+)-ATP-dependent double-strand specific endonuclease, which is likely to be important for homing process in vivo.     

Characterization of the Type III restriction endonuclease PstII from Providencia stuartii

A new Type III restriction endonuclease designated PstII has been purified from Providencia stuartii. PstII recognizes the hexanucleotide sequence 5′-CTGATG(N)_25-26/27-28-3′. Endonuclease activity requires a substrate with two copies of the recognition site in head-to-head repeat and is dependent on a low level of ATP hydrolysis (~40 ATP/site/min). Cleavage occurs at just one of the two sites and results in a staggered cut 25–26 nt downstream of the top strand sequence to generate a two base 5′-protruding end. Methylation of the site occurs on one strand only at the first adenine of 5′-CATCAG-3′. Therefore, PstII has characteristic Type III restriction enzyme activity as exemplified by EcoPI or EcoP15I. Moreover, sequence asymmetry of the PstII recognition site in the T7 genome acts as an historical imprint of Type III restriction activity in vivo. In contrast to other Type I and III enzymes, PstII has a more relaxed nucleotide specificity and can cut DNA with GTP and CTP (but not UTP). We also demonstrate that PstII and EcoP15I cannot interact and cleave a DNA substrate suggesting that Type III enzymes must make specific protein–protein contacts to activate endonuclease activity.     

Characterization of a Novel Type II Restriction-Modification System, Sth368I, Encoded by the Integrative Element ICESt1 of Streptococcus thermophilus CNRZ368

A novel type II restriction and modification (R-M) system, Sth368I, which confers resistance to ST84, was found in Streptococcus thermophilus CNRZ368 but not in the very closely related strain A054. Partial sequencing of the integrative conjugative element ICESt1, carried by S. thermophilus CNRZ368 but not by A054, revealed a divergent cluster of two genes, sth368IR and sth368IM. The protein sequence encoded by sth368IR is related to the type II endonucleases R.LlaKR2I and R.Sau3AI, which recognize and cleave the sequence 5′-GATC-3′. The protein sequence encoded by sth368IM is very similar to numerous type II 5-methylcytosine methyltransferases, including M.LlaKR2I and M.Sau3AI. Cell extracts of CNRZ368 but not A054 were found to cleave at the GATC site. Furthermore, the C residue of the sequence 5′-GATC-3′ was found to be methylated in CNRZ368 but not in A054. Cloning and integration of a copy of sth368IR and sth368IM in the A054 chromosome confers on this strain phenotypes similar to those of CNRZ368, i.e., phage resistance, endonuclease activity of cell extracts, and methylation of the sequence 5′-GATC-3′. Disruption of sth368IR removes resistance and restriction activity. We conclude that ICESt1 encodes an R-M system, Sth368I, which recognizes the sequence 5′-GATC-3′ and is related to the Sau3AI and LlaKR2I restriction systems.     

A topA intein in Pyrococcus furiosus and its relatedness to the r-gyr intein of Methanococcus jannaschii

A new intein coding sequence was found in a topA (DNA topoisomerase I) gene by cloning and sequencing this gene from the hyperthermophilic Archaeon Pyrococcus furiosus. The predicted Pfu topA intein sequence is 373 amino acids long and located two residues away from the catalytic tyrosine of the topoisomerase. It contains putative intein sequence blocks (C, E, and H) associated with intein endonuclease activity, in addition to intein sequence blocks (A, B, F, and G) that are necessary for protein splicing. This DNA topoisomerase I intein is most related to a reverse gyrase intein from the methanogenic Archaeon Methanococcus jannaschii. These two inteins share 31% amino acid sequence identity and, more importantly, have the same insertion sites in their respective host proteins. It is suggested that these two inteins are homologous inteins present in structurally related, but functionally distinct, proteins, with implications on intein evolution and intein homing.     

PfoI, a unique type II restriction endonuclease that recognises the sequence 5′-T↓CCNGGA-3′

A new type II restriction endonuclease designated PfoI has been partially purified from Pseudomonas fluorescens biovar 126. PfoI recognises the interrupted hexanucleotide palindromic sequence 5′-T↓CCNGGA-3′ and cleaves DNA to produce protruding pentanucleotide 5′-ends.     

Mycobacterium tuberculosis RecA intein,a LAGLIDADG homing endonuclease,displays Mn(2+) and DNA-dependent ATPase activity

Mycobacterium tuberculosis RecA intein (PI-MtuI), a LAGLIDADG homing endonuclease, displays dual target specificity in response to alternative cofactors. While both ATP and Mn²⁺ were required for optimal cleavage of an inteinless recA allele (hereafter referred to as cognate DNA), Mg²⁺ alone was sufficient for cleavage of ectopic DNA sites. In this study, we have explored the ability of PI-MtuI to catalyze ATP hydrolysis in the presence of alternative metal ion cofactors and DNA substrates. Our results indicate that PI-MtuI displays maximum ATPase activity in the presence of cognate but not ectopic DNA. Kinetic analysis revealed that Mn²⁺ was able to stimulate PI-MtuI catalyzed ATP hydrolysis, whereas Mg²⁺ failed to do so. Using UV crosslinking, limited proteolysis and amino acid sequence analysis, we show that ³²P-labeled ATP was bound to a 14 kDa peptide containing the putative Walker A motif. Furthermore, the limited proteolysis approach disclosed that cognate DNA was able to induce structural changes in PI-MtuI. Mutation of the presumptive metal ion-binding ligands (Asp122 and Asp222) in the LAGLIDADG motifs of PI-MtuI impaired its affinity for ATP, thus resulting in a reduction in or loss of its endonuclease activity. Together, these results suggest that PI-MtuI is a (cognate) DNA- and Mn²⁺-dependent ATPase, unique from the LAGLIDADG family of homing endonucleases, and implies a possible role for ATP hydrolysis in the recognition and/or cleavage of homing site DNA sequence.     

Molecular Cloning of the Fujinami Sarcoma Virus Genome and Its Comparison with Sequences of Other Related Transforming Viruses

Full-length proviral DNA of Fujinami sarcoma virus (FSV) of chickens was molecularly cloned and characterized. An analysis of FSV DNA integrated in mammalian cells showed that restriction endonuclease SacI has a single cleavage site on FSV DNA. Unintegrated closed circular FSV DNA obtained from newly infected cells was linearized by digestion with SacI and cloned into λgtWES·λB. The following three different molecules were isolated: FSV-1 (4.4 kilobases [kb]) and FSV-2 (4.7 kb), which appeared to be full-length FSV DNA molecules containing either one or two copies of the long terminal repeat structure, and FSV-3 (6 kb), which consisted of part FSV DNA and part DNA of unknown origin. An analysis of the structure of cloned FSV-1 and FSV-2 DNA molecules by restriction endonuclease mapping and hybridization with appropriate probes showed that about 2.6 kb of the FSV-unique sequence called FSV-fps is located in the middle of the FSV genome and is flanked by helper virus-derived sequences of about 1.3 kb at the 5′ end and 0.5 kb at the 3′ end. The long terminal repeats of FSV were found to have no cleavage site for either EcoRI or PvuI. Upon transfection, both FSV-1 DNA and FSV-2 DNA were able to transform mammalian fibroblasts. Four ³²P-labeled DNA fragments derived from different portions of the FSV-fps sequence were used for hybridization to viral RNAs. We found that sequences within the 3′ half of the FSV-fps gene are homologous to RNAs of PRCII avian sarcoma virus and the Snyder-Theilen strain of feline sarcoma virus, both of which were previously shown to contain transforming genes related to FSV-fps. These results suggest that the 3′ portion of the FSV-fps sequence may be crucial for the transforming activity of fps-related oncogenic sequences.     

Inteins of Thermococcus fumicolans DNA polymerase are endonucleases with distinct enzymatic behaviors

The DNA polymerase gene of Thermococcus fumicolans harbors two intein genes. Both inteins have been produced in Escherichia coli and purified either as naturally spliced products from the expression of the complete DNA polymerase gene or directly from the cloned inteins genes. Both recombinant inteins exhibit endonuclease activity, with an optimal temperature of 70 degrees C. The Tfu pol-1 intein, which belongs to the Psp KOD pol-1 allelic family, recognizes and cleaves a minimal sequence of 16 base pairs (bp) on supercoiled DNA with either Mn(2+) or Mg(2+) as cofactor. It cleaves linear DNA only with Mn(2+) and requires a 19-bp minimal recognition sequence. The Tfu pol-2 intein, which belongs to the Tli pol-2 allelic family, is a highly active homing endonuclease using Mg(2+) as cofactor. Its minimal recognition and cleavage site is 21 bp long either on linear or circular DNA substrates. Its endonuclease activity is strongly inhibited by the 3' digestion product, which remains bound to the enzyme after the cleavage reaction. According to current nomenclature, these endonucleases were named PI-TfuI and PI-TfuII. These two inteins thus exhibit different requirements for metal cofactor and substrate topology as well as different mechanism of action.     

Mutations altering the cleavage specificity of a homing endonuclease

The homing endonuclease I-CreI recognizes and cleaves a particular 22 bp DNA sequence. The crystal structure of I-CreI bound to homing site DNA has previously been determined, leading to a number of predictions about specific protein–DNA contacts. We test these predictions by analyzing a set of endonuclease mutants and a complementary set of homing site mutants. We find evidence that all structurally predicted I-CreI/DNA contacts contribute to DNA recognition and show that these contacts differ greatly in terms of their relative importance. We also describe the isolation of a collection of altered specificity I-CreI derivatives. The in vitro DNA-binding and cleavage properties of two such endonucleases demonstrate that our genetic approach is effective in identifying homing endonucleases that recognize and cleave novel target sequences.     

Cloning and Characterization of the Lactococcal Plasmid-Encoded Type II Restriction/Modification System, LlaDII

The LlaDII restriction/modification (R/M) system was found on the naturally occurring 8.9-kb plasmid pHW393 in Lactococcus lactis subsp. cremoris W39. A 2.4-kb PstI-EcoRI fragment inserted into the Escherichia coli-L. lactis shuttle vector pCI3340 conferred to L. lactis LM2301 and L. lactis SMQ86 resistance against representatives of the three most common lactococcal phage species: 936, P335, and c2. The LlaDII endonuclease was partially purified and found to recognize and cleave the sequence 5′-GC↓NGC-3′, where the arrow indicates the cleavage site. It is thus an isoschizomer of the commercially available restriction endonuclease Fnu4HI. Sequencing of the 2.4-kb PstI-EcoRI fragment revealed two open reading frames arranged tandemly and separated by a 105-bp intergenic region. The endonuclease gene of 543 bp preceded the methylase gene of 954 bp. The deduced amino acid sequence of the LlaDII R/M system showed high homology to that of its only sequenced isoschizomer, Bsp6I from Bacillus sp. strain RFL6, with 41% identity between the endonucleases and 60% identity between the methylases. The genetic organizations of the LlaDII and Bsp6I R/M systems are identical. Both methylases have two recognition sites (5′-GCGGC-3′ and 5′-GCCGC-3′) forming a putative stem-loop structure spanning part of the presumed −35 sequence and part of the intervening region between the −35 and −10 sequences. Alignment of the LlaDII and Bsp6I methylases with other m⁵C methylases showed that the protein primary structures possessed the same organization.     

Characterization of an Extremely Thermostable Restriction Enzyme, PspGI, from a Pyrococcus Strain and Cloning of the PspGI Restriction-Modification System in Escherichia coli

An extremely thermostable restriction endonuclease, PspGI, was purified from Pyrococcus sp. strain GI-H. PspGI is an isoschizomer of EcoRII and cleaves DNA before the first C in the sequence 5′ ^CCWGG 3′ (W is A or T). PspGI digestion can be carried out at 65 to 85°C. To express PspGI at high levels, the PspGI restriction-modification genes (pspGIR and pspGIM) were cloned in Escherichia coli. M.PspGI contains the conserved sequence motifs of α-aminomethyltransferases; therefore, it must be an N4-cytosine methylase. M.PspGI shows 53% similarity to (44% identity with) its isoschizomer, M.MvaI from Micrococcus variabilis. In a segment of 87 amino acid residues, PspGI shows significant sequence similarity to EcoRII and to regions of SsoII and StyD4I which have a closely related recognition sequence (5′ ^CCNGG 3′). PspGI was expressed in E. coli via a T7 expression system. Recombinant PspGI was purified to near homogeneity and had a half-life of 2 h at 95°C. PspGI remained active following 30 cycles of thermocycling; thus, it can be used in DNA-based diagnostic applications.     

Catalytic domain of restriction endonuclease BmrI as a cleavage module for engineering endonucleases with novel substrate specificities

Creating endonucleases with novel sequence specificities provides more possibilities to manipulate DNA. We have created a chimeric endonuclease (CH-endonuclease) consisting of the DNA cleavage domain of BmrI restriction endonuclease and C.BclI, a controller protein of the BclI restriction-modification system. The purified chimeric endonuclease, BmrI198-C.BclI, cleaves DNA at specific sites in the vicinity of the recognition sequence of C.BclI. Double-strand (ds) breaks were observed at two sites: 8 bp upstream and 18 bp within the C-box sequence. Using DNA substrates with deletions of C-box sequence, we show that the chimeric endonuclease requires the 5′ half of the C box only for specific cleavage. A schematic model is proposed for the mode of protein–DNA binding and DNA cleavage. The present study demonstrates that the BmrI cleavage domain can be used to create combinatorial endonucleases that cleave DNA at specific sequences dictated by the DNA-binding partner. The resulting endonucleases will be useful in vitro and in vivo to create ds breaks at specific sites and generate deletions.     

The nature of the 5'-terminus is a major determinant for DNA processing by Schizosaccharomyces pombe Rad2p, a FEN-1 family nuclease

The nuclease activity of FEN-1 is essential for both DNA replication and repair. Intermediate DNA products formed during these processes possess a variety of structures and termini. We have previously demonstrated that the 5′→3′ exonuclease activity of the Schizosaccharomyces pombe FEN-1 protein Rad2p requires a 5′-phosphoryl moiety to efficiently degrade a nick-containing substrate in a reconstituted alternative excision repair system. Here we report the effect of different 5′-terminal moieties of a variety of DNA substrates on Rad2p activity. We also show that Rad2p possesses a 5′→3′ single-stranded exonuclease activity, similar to Saccharomyces cerevisiae Rad27p and phage T5 5′→3′ exonuclease (also a FEN-1 homolog). FEN-1 nucleases have been associated with the base excision repair pathway, specifically processing cleaved abasic sites. Because several enzymes cleave abasic sites through different mechanisms resulting in different 5′-termini, we investigated the ability of Rad2p to process several different types of cleaved abasic sites. With varying efficiency, Rad2p degrades the products of an abasic site cleaved by Escherichia coli endonuclease III and endonuclease IV (prototype AP endonucleases) and S.pombe Uve1p. These results provide important insights into the roles of Rad2p in DNA repair processes in S.pombe.     

A single catalytic domain of the junction-resolving enzyme T7 endonuclease I is a non-specific nicking endonuclease

A stable heterodimeric protein containing a single correctly folded catalytic domain (SCD) of T7 endonuclease I was produced by means of a trans-splicing intein system. As predicted by a model presented earlier, purified SCD protein acts a non-specific nicking endonuclease on normal linear DNA. The SCD retains some ability to recognize and cleave a deviated DNA double-helix near a nick or a strand-crossing site. Thus, we infer that the non-specific and nicked-site cleavage activities observed for the native T7 endonuclease I (as distinct from the resolution activity) are due to uncoordinated actions of the catalytic domains. The positively charged C-terminus of T7 Endo I is essential for the enzymatic activity of SCD, as it is for the native enzyme. We propose that the preference of the native enzyme for the resolution reaction is achieved by cooperativity in the binding of its two catalytic domains when presented with two of the arms across a four-way junction or cruciform structure.     

The RecA intein of Mycobacterium tuberculosis promotes cleavage of ectopic DNA sites. Implications for the dispersal of inteins in natural populations

The RecA intein of Mycobacterium tuberculosis, a novel double-stranded DNA endonuclease, requires both Mn(2+) and ATP for efficient cleavage of the inteinless recA allele. In this study, we show that Mg(2+) alone was sufficient to stimulate PI-MtuI to cleave double-stranded DNA at ectopic sites. In the absence of Mg(2+), PI-MtuI formed complexes with topologically different forms of DNA containing ectopic recognition sequences with equal affinity but failed to cleave DNA. We observed that PI-MtuI was able to inflict double-strand breaks robustly within the ectopic recognition sequence to generate either a blunt end or 1-2-nucleotide 3'-hydroxyl overhangs. Mutational analyses of the presumptive metal ion-binding ligands (Asp(122), Asp(222), and Glu(220)) together with immunoprecipitation assays provided compelling evidence to link both the Mg(2+)- and Mn(2+) and ATP-dependent endonuclease activities to PI-MtuI. The kinetic mechanism of PI-MtuI promoted cleavage of ectopic DNA sites proceeded through a sequential mechanism with transient accumulation of nicked circular duplex DNA as an intermediate. Together, these data suggest that PI-MtuI, like group II introns, might mediate ectopic DNA transposition and hence its lateral transfer in natural populations.     

A specific endonuclease from Brevibacterium albidum

A new restriction-like endonuclease, BalI, has been partially purified from Brevibacterium albidum. This enzyme cleaves bacteriophage λ DNA at least 18 times and adenovirus-2 DNA at least 16 times, but does not cleave simian virus 40 DNA. All sites cleaved by BalI are also cut by the specific endonuclease HaeIII from Haemophilus aegyptius. The recognition sequence of BalI is 5′-T-G-G ↓ C-C-A-3′ 3′-A-C-C ↓ G-G-T-5′ and the cleavage site is indicated by the arrows.     

Purification and characterization of the DNA cleavage and recognition site of I-ScaI mitochondrial group I intron encoded endonuclease produced in Escherichia coli

The second intron in the mitochondrial cytb gene of Saccharomyces capensis, belonging to group I, encodes a 280 amino acid protein containing two LAGLIDADG motifs. Genetic and molecular studies have previously shown that this protein has a dual function in the wild-type strain. It acts as a specific homing endonuclease I-ScaI promoting intron mobility and as a maturase promoting intron splicing. Here we describe the synthesis of a universal code equivalent to the mitochondrial sequence coding for this protein and the in vitro characterization of I-ScaI endonuclease activity, using a truncated mutant form of the protein p28bi2 produced in Escherichia coli. We have also determined the cleavage pattern as well as the recognition site of p28bi2. It was found that p28bi2 generates a double-strand cleavage downstream from the intron insertion site with 4 nt long 3′-overhangs. Mutational analysis of the DNA target site shows that p28bi2 recognizes a 16–19 bp sequence from positions –11 to +8 with respect to the intron insertion site.