A Simplified Technique for Low Temperature Methyl Methacrylate Embedding

A simplified method for low temperature methyl methacrylate embedding with inhibited methyl methacrylate monomer is demonstrated using proper concentrations of benzoyl peroxide and N,N-dimethylaniline. The polymerized tissue blocks cut well and the tissue sections obtained show excellent acid phosphatase activity when demonstrated with the newly improved technique and Goldner's staining. Likewise, double tetracycline labels are well revealed by fluorescence microscopy.     

Alkaline and Acid Phosphatase Demonstration in Human Bone and Cartilage: Effects of Fixation Interval and Methacrylate Embedments

Human bone and cartilage specimens were evaluated for acid and alkaline phosphatase localization following varying fixation periods for fresh or frozen tissue. Formalin fixations of up to 183 hr were followed by embedment in methyl methacrylate; frozen tissue was examined either without fixation or following fixation for up to 1 hr and subsequent glycol or methyl methacrylate embedding. The humeral epiphysis of a young patient with osteogenic sarcoma showed optimum acid and alkaline phosphatase localization following fixation for periods up to 15 hr and embedding in methyl methacrylate. Frozen costochondral junction from a newborn with osteogenesis imperfecta type II showed optimum acid and alkaline phosphatase localization following 30 min fixation in formalin and embedding in methyl methacrylate or after 5 min fixation and embedding in glycol methacrylate.     

Alkaline and acid phosphatase demonstration in human bone and cartilage: effects of fixation interval and methacrylate embedments

Human bone and cartilage specimens were evaluated for acid and alkaline phosphatase localization following varying fixation periods for fresh or frozen tissue. Formalin fixations of up to 183 hr were followed by embedment in methyl methacrylate; frozen tissue was examined either without fixation or following fixation for up to 1 hr and subsequent glycol or methyl methacrylate embedding. The humeral epiphysis of a young patient with osteogenic sarcoma showed optimum acid and alkaline phosphatase localization following fixation for periods up to 15 hr and embedding in methyl methacrylate. Frozen costochondral junction from a newborn with osteogenesis imperfecta type II showed optimum acid and alkaline phosphatase localization following 30 min fixation in formalin and embedding in methyl methacrylate or after 5 min fixation and embedding in glycol methacrylate.     

Polyester Wadding for Specimen Orientation During Embedding in Methacrylates

Polyester fibers are not dissolved by either glycol methacrylate or methyl methacrylate. Commercial polyester wadding is consequently an advantageous material to use in getting precise orientation of tissue specimens during embedding in methacrylate.     

A new histological embedding method by low-temperature polymerisation of methyl methacrylate allowing immuno- and enzyme histochemical studies on semi-thin sections of undecalcified bone marrow biopsies

Summary A new procedure of embedding in methyl methacrylate (MMA) is introduced, which enables immunostaining by preservation of cellular epitopes. This could be achieved by reduction of polymerisation temperature from ca. 60° C to 22° C within the core of tissue blocks. Reduction of the polymerisation temperature is due to destabilisation of acrylate monomer, reduction of catalyst, exclusion of molecular oxygen, chemical initiation and reduction of environmental temperature. This results in good preservation of antigens and enzymes in the haematopoietic and lymphatic tissue of bone marrow as well as lymphoid, epithelial and mesenchymal markers in other tissues, comparable to paraffin embedding. Results are demonstrated by application of monoclonal and polyclonal antibodies and by demonstration of enzyme activity conventionally used in haematology.     

A new histological embedding method by low-temperature polymerisation of methyl methacrylate allowing immuno- and enzyme histochemical studies on semi-thin sections of undecalcified bone marrow biopsies.

A new procedure of embedding in methyl methacrylate (MMA) is introduced, which enables immunostaining by preservation of cellular epitopes. This could be achieved by reduction of polymerisation temperature from ca. 60 degrees C to 22 degrees C within the core of tissue blocks. Reduction of the polymerisation temperature is due to destabilisation of acrylate monomer, reduction of catalyst, exclusion of molecular oxygen, chemical initiation and reduction of environmental temperature. This results in good preservation of antigens and enzymes in the haematopoietic and lymphatic tissue of bone marrow as well as lymphoid, epithelial and mesenchymal markers in other tissues, comparable to paraffin embedding. Results are demonstrated by application of monoclonal and polyclonal antibodies and by demonstration of enzyme activity conventionally used in haematology.     

Polyester wadding for specimen orientation during embedding in methacrylates

Polyester fibers are not dissolved by either glycol methacrylate or methyl methacrylate. Commercial polyester wadding is consequently an advantageous material to use in getting precise orientation of tissue specimens during embedding in methacrylates.     

Simultaneous demonstration of bone alkaline and acid phosphatase activities in plastic-embedded sections and differential inhibition of the activities

Summary Bone alkaline (AlP) and acid phosphatase (AcP) activities were simultaneusly demonstrated in tissue sections obtained from mice, rats, and humans. The method involved tissue fixation in ethanol, embedding in glycol methacrylate (GMA), and demonstration of AlP and AcP activities employing a simultaneous coupling azo dye technique using substituted naphthol phosphate as a substrate. AlP activity was demonstrated first followed by AcP activity. Both enzyme activities were demonstrated in tissue sections from bones fixed and/or stored in acetone or 70% ethanol for up to 14 days or stored in GMA for 2 months. AlP activity in tissue sections from bones fixed in 10% formalin, 2% glutaraldehyde, or formal-calcium, however, was markedly inhibited after 3–7 days and was no longer detectable after 14 days of fixation. Moreover, AlP activity was diminished in tissue sections from bones fixed in 70% ethanol or 10% formalin and subsequently demineralized in 10% EDTA (pH7) for 2 days, and the activity was completely abolished in tissue sections from bones subsequently demineralized in 5% formic acid: 20% sodium citrate (1:1, pH 4.2) for 2 days. Methyl methacrylate (MMA) embedding at concentrations above 66% completely inhibited AlP activity. AcP activity, however, was only partially inhibited by formalin, glutaraldehyde, or formal-calcium after 7 or 14 days of fixation or by MMA embedding and was unaffected by the demineralizing agent formic acid-citrate for 2 days. While AcP activity was preserved in bones fixed in formalin and subsequently demineralized in EDTA, the activity was completely abolished when EDTA demineralization was carried out on bones previously fixed in 70% ethanol. These results indicate that bone AlP and AcP activities can be demonstrated simultaneously in the same section using a simple tissue preparation technique and that the activities are retained in tissues fixed and/or stored in acetone, 70% ethanol or GMA, but are differentially inactivated by other fixatives studied, and by EDTA, formic acid-citrate, and MMA embedding.Abbreviations AcP acid phosphatase - AlP alkaline phosphatase - GMA glycol methacrylate - MMA methyl methacrylate - EDTA ethylenediaminetetraacetic acid     

Glycol methacrylate as an embedding medium for bone

A simple and reliable procedure for embedding undecalcified trabecular bone tissue in noncommercial glycol methacrylate (GMA) has been developed. The embedding mixture includes a monomer, methacrylic acid hydroxyethyl ester; a copolymer, methacrylic acid butyl ester; a cross-linker, ethylene glycol dimethacrylate; a catalyst, Luperco; a chemical initiator (N,N-dimethylaniline) and, to avoid excessive elevation of temperature during polymerization, a heat moderator, alpha-terpinene. The appropriate proportions of these components have been selected to give specimens which can be easily sectioned with classical microtomes and which do not swell but spread evenly on a water surface. Since polymerization occurs at -4 C, the method allows demonstration of such enzymatic activities as acid and alkaline phosphatase and carbonic anhydrase. It provides excellent preservation of bone tissue and in studies of bone metabolism allows histomorphometry as well as visualization of fluorescent labeling and radioactive markers. The cost is significantly less than available commercial kits. In our hands glycol methacrylate is at present more useful than methyl methacrylate and is used in our laboratory for routine embedding of bone tissue.     

Assessment of Demyelination in Glycol Methacrylate Sections: A New Protocol for Cresyl Fast Violet Staining

A simple staining technique for nervous tissue is described. Tissue perfused with glutaraldehyde and formaldehyde and postfixed with osmium tetroxide is embedded in glycol methacrylate. One-micrometer sections are stained with 0.05% cresyl fast violet aqueous solution at 60 C for 5 min, washed with tap water and air dried. With this method the details of all nervous tissue elements are clearly demonstrated. The technique is particularly useful for assessing demyelination because the staining of axoplasm allows demyelinated axons to be well visualized.     

Assessment of demyelination in glycol methacrylate sections: a new protocol for cresyl fast violet staining

A simple staining technique for nervous tissue is described. Tissue perfused with glutaraldehyde and formaldehyde and postfixed with osmium tetroxide is embedded in glycol methacrylate. One-micrometer sections are stained with 0.05% cresyl fast violet aqueous solution at 60 C for 5 min, washed with tap water and air dried. With this method the details of all nervous tissue elements are clearly demonstrated. The technique is particularly useful for assessing demyelination because the staining of axoplasm allows demyelinated axons to be well visualized.     

Experimental hydroxyapatite cement cranioplasty.

Hydroxyapatite cement is a calcium phosphate-based material that when mixed with water forms a dense paste that sets within 15 minutes and isothermically converts in vivo to a microporous hydroxyapatite implant. This cement was used to reconstruct bilateral 2.5-cm-diameter full-thickness critical-sized parietal skull defects in six cats. One side was reconstructed with 100 percent hydroxyapatite cement, and the other with a mixture of 50 percent hydroxyapatite cement and 50 percent ground autogenous bone by weight. These animals were sacrificed at 6 and 12 months after implantation. Positive and negative controls also were prepared. The anatomic contour of the soft tissue overlying all hydroxyapatite cement implants was well maintained, there were no wound infections or structural failures, and the implants were well tolerated histologically. None of the negative (unreconstructed) control defects was completely filled with repair bone, and all positive (methyl methacrylate) controls demonstrated foreign-body giant-cell formation and fibrous encapsulation of the implants. Examination of decalcified and undecalcified sections revealed progressive but variable replacement of the cement by new bone and soft tissue without a change in the shape or volume of the hydroxyapatite cement-reconstructed areas. New bone comprised 77.3 and 64.7 percent of the tissue replacing the hydroxyapatite cement and hydroxyapatite cement-bone implants, respectively. Replacement of the hydroxyapatite cement implants by new bone is postulated to occur by a combination of osteoconduction and implant resorption. These results indicate that further experimental research leading to the possible application of hydroxyapatite cement for full-thickness calvarial defect reconstruction in humans is warranted.     

Methacrylate as an Embedding Medium for Woody Tissues

Methacrylate can be readily infiltrated into woody tissues. After infiltration, the tissue is transferred to a polymerizing mixture of 95:5 butyl methacrylate to methyl methacrylate by volume. For each 100 ml of polymerizing mixture, 2 grams of Luperco CDB catalyst are added. The hardness of the matrix may be increased by increasing the proportion of methyl methacrylate. Polymerization is accomplished by 2 days in a 50° C oven or 2 days in a small ultraviolet radiation chamber (42° C), the latter being the technique of choice. The blocks can be sectioned readily at 6 μ to more than 30 μ. Sectioning is facilitated by keeping the block wet with a 1:1 glycerol-alcohol solution. Best preparations are obtained when the matrix is removed after sectioning; however, staining in safranin O-fast green FCF may be-accomplished through the matrix. The technique is very rapid, convenient to use, and has produced excellent preparations from several species of woody plants.     

Biomimetic poly(methyl methacrylate)-based terpolymers: modulation of bacterial adhesion effect

Adherence of Staphylococcus aureus, responsible for major foreign body infections, was assessed onto functionalized poly(methyl methacrylate)-based terpolymers bearing sulfonate and carboxylate groups and onto poly(methyl methacrylate) as control. These terpolymers, have been synthesized by radical copolymerization of methyl methacrylate, methacrylic acid, and sodium styrene sulfonate by varying the ratio R = [COO(-)]/[COO(-) + SO(3)(-)] from 0 to 1 and keeping ionic monomer content between 7 and 18%. Adsorption of fibronectin onto poly(methyl methacrylate) was shown to dramatically promote bacterial adherence, whereas a strong inhibition of bacteria adherence was observed onto functionalized terpolymers containing both carboxylate and sulfonate groups. When terpolymers were predominantly functionalized by carboxylate groups, bacteria adherence was favored and reached values close to those obtained for poly(methyl methacrylate). These results have been related to the distribution of the anionic groups along the macromolecular chains, creating active sites responsible for specific interactions with fibronectin and inducing modifications of its conformation. The conformation of the adsorbed adhesive protein was then suggested to have an influence on the availability of its interaction sites to bacteria adhesins and therefore on modulation of bacteria adherence. Inhibition of Staphylococcus aureus adherence by functionalized poly(methyl methacrylate)-based terpolymers is of great interest in the field of biomedical implants and especially in the case of ophthalmic applications.     

Resin tissue microarrays: a universal format for immunohistochemistry.

Tissue microarray (TMA) technology allows the miniaturization and characterization of multiple tissue samples on a single slide and commonly uses formalin-fixed paraffin-embedded (FFPE) tissue or acetone-fixed frozen tissue. The former provides good morphology but can compromise antigenicity, whereas the latter provides compromised morphology with good antigenicity. Here, we report the development of TMAs in glycol methacrylate resin, which combine the advantages of both methods in one embedding format. Freshly collected tissue fixed in -20C acetone or 10% neutral buffered formaldehyde were cored and arrayed into an intermediary medium of 2% agarose before infiltration of the agarose array with glycol methacrylate resin. Acetone-fixed resin TMA demonstrated improved morphology over acetone-fixed frozen TMA, with no loss of antigenicity. Staining for extracellular, cell surface, and nuclear antigens could be realized with monoclonal and polyclonal antibodies as well as with monomeric single-chain Fv preparations. In addition, when compared with FFPE TMA, formalin-fixed tissue in a resin TMA gave enhanced morphology and subcellular detail. Therefore, resin provides a universal format for the construction of TMAs, providing improved tissue morphology while retaining antigenicity, allows thin-section preparation, and could be used to replace preparation of frozen and FFPE TMAs for freshly collected tissue.     

Injectable doubly cross-linked microgels for improving the mechanical properties of degenerated intervertebral discs

The use of injectable pH-responsive doubly cross-linked microgels (DX microgels) to improve the mechanical properties of degenerated intervertebral discs is demonstrated for the first time. The microgel comprised methyl methacrylate (MMA), methacrylic acid (MAA), ethyleneglycol dimethacrylate (EGD) and glycidyl methacrylate (GM) and was poly(MMA/MAA/EGD)-GM. The GM facilitated covalent interparticle cross-linking. The DX microgels are shown to have tunable mechanical properties. Degeneration of model bovine intervertebral discs (IVDs) was induced using collagenase. When injected into degenerated IVDs the DX microgels were shown to improve the strain, modulus, toughness and resilience. The extent of mechanical property improvement was an increasing function of DX microgel concentration, suggesting tunability. Cytotoxicity studies showed that the DX microgel was biocompatible under the conditions investigated. The results of this study imply that injectable DX microgels have good potential as a future regenerative medicine strategy for restoring the mechanical properties of degenerated load-bearing soft tissue, such as IVDs.     

Application of Stains-All for Demarcation of Cement Lines in Methacrylate Embedded Bone

Cement lines provide a record of sites of past remodeling buried in the matrix of bone. A method is reported for application of Stains-all, a cationic carbocyanine dye, for demarcation of cement lines in bone. The method, which is simple, works well for both glycol methacrylate and methyl methacrylate undemineralized embedments and produces good concomitant staining of cytoplasm and nuclei of osteoblasts, osteoclasts and marrow cells.     

Synthesis, swelling behavior, and biocompatibility of novel physically cross-linked polyurethane-block-poly(glycerol methacrylate) hydrogels

Physically cross-linked novel block copolymer hydrogels with tunable hydrophilic properties for biomedical applications were synthesized by controlled radical polymerization of polyurethane macroiniferter and (2,2-dimethyl-1,3-dioxolane) methyl methacrylate. The block copolymers were converted to hydrogels by the selective hydrolysis of poly[(2,2-dimethyl-1,3-dioxolane) methyl methacrylate] block to poly(glycerol methacrylate). The block copolymerization has been monitored by monomer conversion and molecular weight increase as a function of time. It was observed that the polymerization proceeded with a characteristic "living" behavior where both monomer conversion and molecular weight increased linearly, with increasing reaction time. The resulting hydrogels were investigated for their equilibrium water content (EWC), dynamic water contact angles, swelling kinetics, thermodynamic interaction parameters, plasma protein adsorption, and platelet adhesion. Similar to our previous mechanically responsive hydrogels (Mequanint, K.; Sheardown, H. J. Biomater. Sci. Polym. Ed. 2005, 10, 1303-1318), the present results indicated that block copolymer hydrogels have excellent hydrophilicity and swelling behavior with improved modulus of elasticity. The equilibrium swelling was affected by the hydrolysis time, block length of poly(glycerol methacrylate), temperature, and the presence of soluble salts. Fibrinogen adsorption and platelet adhesion were significantly lower for the hydrogels than for the control polyurethane, whereas albumin adsorption increased for the hydrogels in proportion to the contents of poly(glycerol methacrylate). These hydrogels have potential in a number of biomedical applications such as drug delivery and scaffolds for tissue engineering.     

Enzyme histochemistry on freeze-substituted glycol methacrylate-embedded tissue

We developed a method for histochemical demonstration of a wide range of enzymes in freeze-substituted glycol methacrylate-embedded tissue. Tissue specimens were freeze-substituted in acetone and then embedded at low temperature in glycol methacrylate resin. All enzymes studied (oxidoreductases, hydrolases) were readily demonstrated. The enzymes displayed high activity and were accurately localized without diffusion when tissue sections were incubated in aqueous media, addition of colloid stabilizers to the incubating media not being required. Freeze-substitution combined with low-temperature glycol methacrylate embedding permits the demonstration of a wide range of enzymes with accurate enzyme localization, maintenance of enzyme activity, and excellent tissue morphology.