Adsorption of Cu(II), Cd(II), and Pb(II) from aqueous single metal solutions by sugarcane bagasse and mercerized sugarcane bagasse chemically modified with succinic anhydride

This work describes the preparation of new chelating material from mercerized sugarcane bagasse. The first part treats the chemical modification of non-mercerized sugarcane bagasse (SCB) and twice-mercerized sugarcane bagasse (MMSCB) with succinic anhydride. Mass percent gains (mpg) and degrees of succinylation (DS) of succinylated non- and twice-mercerized sugarcane bagasse 1 (SCB 1 and MMSCB 1) were calculated. MMSCB 1 exhibited an increase in mpg and DS of 49.2% and 0.9 mmol/g in relation to SCB 1. SCB 2 and MMSCB 2 were obtained by treatment of MMSCB 1 and SCB 1 with bicarbonate solution to release the carboxylate functions and characterized by FTIR. The second part evaluates and compares the adsorption capacity of SCB 2 and MMSCB 2 for Cu²⁺, Cd²⁺ and Pb²⁺ ions in an aqueous single metal solution. Adsorption isotherms were developed using Langmuir model. MMSCB 2 exhibited an increase in Q_max for Cd²⁺ (43.6 mg/g) and Pb²⁺ (83.3 mg/g) in relation to SCB 2.     

Adsorption of Cu(II), Cd(II), and Pb(II) from aqueous single metal solutions by mercerized cellulose and mercerized sugarcane bagasse chemically modified with EDTA dianhydride (EDTAD)

This work describes the preparation of new chelating materials derived from cellulose and sugarcane bagasse for adsorption of Cu²⁺, Cd²⁺, and Pb²⁺ ions from aqueous solutions. The first part involved the mercerization treatment of cellulose and sugarcane bagasse with NaOH 5 mol/L. Non- and mercerized cellulose and sugarcane bagasse were then reacted with ethylenediaminetetraacetic dianhydride (EDTAD) in order to prepare different chelating materials. These materials were characterized by mass percent gain, X-ray diffraction, FTIR, and elemental analysis. The second part consisted of evaluating the adsorption capacity of these modified materials for Cu²⁺, Cd²⁺, and Pb²⁺ ions from aqueous single metal solutions, whose concentration was determined by atomic absorption spectroscopy. These materials showed maximum adsorption capacities for Cu²⁺, Cd²⁺, and Pb²⁺ ions ranging from 38.8 to 92.6 mg/g, 87.7 to 149.0 mg/g, and 192.0 to 333.0 mg/g, respectively. The modified mercerized materials showed larger maximum adsorption capacities than modified non-mercerized materials.     

Adsorption of heavy metal from aqueous solution by dehydrated root powder of long-root Eichhornia crassipes

The root powder of long-root Eichhornia crassipes, as a new kind of biodegradable adsorbent, has been tested for aqueous adsorption of Pb, Zn, Cu, and Cd. From FT-IR, we found that the absorption peaks of phosphorous compounds, carbonyl, and nitrogenous compounds displayed obvious changes before and after adsorption which illustrated that plant characteristics may play a role in binding with metals. Surface properties and morphology of the root powders have been characterized by means of SEM and BET. Energy spectrum analysis showed that the metals were adsorbed on root powders after adsorption. Then, optimum quantity of powder, pH values, and metal ion concentrations in single-system and multi-system were detected to discuss the characteristics and mechanisms of metal adsorption. Freundlich model and the second-order kinetics equation could well describe the adsorption of heavy metals in single-metal system. The adsorption of Pb, Zn, and Cd in the multi-metal system decreased with the concentration increased. At last, competitive adsorption of every two metals on root powder proved that Cu and Pb had suppressed the adsorption performance of Cd and Zn.     

化学改性甘蔗渣对固定化细胞发酵产丁醇的影响

旨在研究化学改性的甘蔗渣作为固定化载体对丙酮丁醇梭菌Clostridium acetobutylicum XY16发酵制备生物丁醇的影响。首先利用不同浓度的聚乙烯亚胺(PEI)和1 g/L戊二醛(GA)对甘蔗渣表面进行化学改性,增强甘蔗渣对Clostridium acetobutylicum XY16的附载能力。经4 g/L聚乙烯亚胺和1 g/L戊二醛改性的甘蔗渣(添加量10 g/L)应用到固定化批次发酵中,发酵36 h后丁醇和总溶剂浓度最高,分别达到了12.24 g/L和21.67 g/L,同时溶剂的生产速率达到0.60 g/(L·h),生产速率比游离细胞和未改性甘蔗渣固定化细胞分批发酵分别提高了130.8%和66.7%。在此基础上对改性甘蔗渣固定化的细胞进行6次重复批次发酵,丁醇和总溶剂的产量稳定,溶剂生产速率逐渐提高至0.83 g/(L·h),同时转化率也提高至0.42 g/g。     

Adsorption of zinc from aqueous solution using chemically treated newspaper pulp

Adsorption of zinc was studied using chemically modified newspaper pulp as an adsorbent in the aqueous medium. Quantitative chemical analysis showed the presence of trace quantities of some inorganic elements along with phosphorous in TNP. The experimental adsorption data fitted reasonably well to both Freundlich and Langmuir isotherm. pHzpc of TNP was 5.1, which indicated that the adsorbent was more potential for cationic adsorption. The adsorption kinetic data followed a pseudo-second order model for zinc. Optimum Zn(2+) loading was 9.20 mg/g for 10.31 mg/l initial zinc concentration at pH 5.80. Zn(2+) loading on TNP was dependent on initial zinc concentration. TNP was a potential adsorbent for the removal of Zn from the effluent of electroplating industry.     

Image analysis of modified cellulose fibers from sugarcane bagasse by zirconium oxychloride

Surface modification of natural fibers has been made using different methods. In this paper, cellulose fibers from sugarcane bagasse were bleached and modified by zirconium oxychloride in situ. The chemically modified cellulose fibers were compared to those of bleached ones. Cellulose fibers were modified with ZrO₂·nH₂O nanoparticles through the use of zirconium oxychloride in acidic medium in the presence of cellulose fibers using urea as the precipitating agent. The spatial distribution characterization of hydrous zirconium oxide on cellulose fibers was carried out by combining both processing and image analyses obtained by SEM and statistical methodologies. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TG) were also used to characterize the nanocomposite. Results indicated that ZrO₂·nH₂O nanoparticles of about 30-80 nm diameter deposited on cellulose fibers were heterogeneously dispersed.     

Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone

Apricot stones were carbonised and activated after treatment with sulphuric acid (1:1) at 200 degrees C for 24 h. The ability of the activated carbon to remove Ni(II), Co(II), Cd(II), Cu(II), Pb(II), Cr(III) and Cr(VI) ions from aqueous solutions by adsorption was investigated. Batch adsorption experiments were conducted to observe the effect of pH (1-6) on the activated carbon. The adsorptions of these metals were found to be dependent on solution pH. Highest adsorption occurred at 1-2 for Cr(VI) and 3-6 for the rest of the metal ions, respectively. Adsorption capacities for the metal ions were obtained in the descending order of Cr(VI) > Cd(II) > Co(II) > Cr(III) > Ni(II) > Cu(II) > Pb(II) for the activated carbon prepared from apricot stone (ASAC).     

黏土矿物中重金属离子的吸附规律及竞争吸附

采用等温吸附法,研究了重金属铜、铅、镉、镍在膨润土中的吸附特征,发现膨润土对铜、铅的吸附明显强于镉、镍,吸附强度大小顺序为Pb2 >Cu2 >Ni2 >Cd2 。Langmuir和Freundlich方程对这4种金属离子等温吸附的拟合均呈极显著关系。Pb2 、Cd2 、Ni2 分别与Cu2 的双组分竞争吸附表明,黏土矿物对4种离子具有"选择性吸附"。在Pb2 、Ni2 、Cd2 的存在条件下,黏土矿物对Cu2 的吸附产生不同程度的下降;100mg/LCu2 对Pb2 的影响不大,但可完全抑制Ni2 、Cd2 的吸附。建立了IAS和LCA模型来预测Pb2 与Cu2 的双组分竞争吸附,并对LCA模型进行修正,提出了更符合实际情况的竞争吸附模型。文章最后用LCA修正模型对Pb2 与Cu2 的双组分竞争吸附进行了模拟。     

Ion exchange during heavy metal bio-sorption from aqueous solution by dried biomass of macrophytes

In this study, potentials of oven dried biomass of Eichhornia crassipes, Valisneria spiralis and Pistia stratiotes, were examined in terms of their heavy metal (Cd, Ni, Zn, Cu, Cr and Pb) sorption capacity, from individual-metal and multi-metal aqueous solutions at pH 6.0+/-0.1 (a popular pH of industrial effluent). V. spiralis was the most and E. crassipes was the least efficient for removal of all the metals. Cd, Pb and Zn were efficiently removed by all the three biomass. Cd was removed up to 98% by V. spiralis. Sorption data for Cr, Ni and Cd fitted better to Langmuir isotherm equation, while, the sorption data for Pb, Zn and Cu fitted better to Freundlich isotherm equation. In general, the presence of other metal ions did not influence significantly the targeted metal sorption capacity of the test plant biomasses. Ion exchange was proven the main mechanism involved in bio-sorption and there was a strong ionic balance between adsorbed (H(+) and M(2+)) to the released ions (Na(+) and K(+)) to and from the biomass. No significant difference was observed in the metal exchanged amount, by doubling of metal concentration (15-30 mg/l) in the solution and employing individual-metal and multi-metal solutions.     

Removal of selected metal ions from aqueous solution using modified corncobs

The objective of this study was to convert corncobs to metal ion adsorbents for wastewater treatment. Ground corncobs were modified with either 0.6 M citric acid (CA) or 1.0 M phosphoric acid (PA) to help improve their natural adsorption capacity. The effect of a combination of wash and modification treatment was tested for corncob adsorption efficiency with five different metal ions (cadmium, copper, lead, nickel, zinc) individually or in a mixed solution containing each metal at a 20 mM concentration. Results were compared to those of commercial resins Amberlite IRC-718, Amberlite 200, Duolite GT-73 and carboxymethylcellulose (CMC). Modified corncobs showed the same adsorption efficiency as Duolite GT-73 for cadmium, copper, nickel and zinc ions and had greater adsorption than CMC for nickel and zinc ions. For mixed metals, the modified corncobs exhibited the same adsorption efficiency as Duolite GT-73 for cadmium and copper ions and the same or higher adsorption than Amberlite IRC-718 for lead ions. Adsorption capacities of modified samples were compared to those of Amberlite IRC-718, Amberlite 200 and Duolite GT-73. Commercial resins generally had higher adsorption capacities than modified corncobs. However, the adsorption capacity of modified corncobs for copper and lead ions was equivalent to Duolite GT-73, but was lower than for Amberlite IRC-718 or Amberlite 200. Depending on the specific metal ion and the presence or absence of other metal ions, chemically modified corncobs were at least equivalent in adsorption properties to all of the commercial cation exchange resins examined in this study.     

Adsorption of Cu(II), Cd(II), and Pb(II) from aqueous single metal solutions by cellulose and mercerized cellulose chemically modified with succinic anhydride

This work describes the preparation of new chelating material from mercerized cellulose. The first part treats the chemical modification of non-mercerized cellulose (cell 1) and mercerized cellulose (cell 2) with succinic anhydride. Mass percent gains (mpg) and degree of succinylation (DS) of cell 3 (from cell 1) and cell 4 (from cell 2) were calculated. Cell 4 in relation to cell 3 exhibited an increase in mpg and in the concentration of carboxylic functions of 68.9% and 2.8 mmol/g, respectively. Cells 5 and 6 were obtained by treatment of cells 3 and 4 with bicarbonate solution to release the carboxylate functions and characterized by FTIR. The second part compares the adsorption capacity of cells 5 and 6 for Cu2+, Cd2+, and Pb2+ ions in an aqueous single metal solution. Adsorption isotherms were developed using Langmuir model. Cell 6 in relation to cell 5 exhibited an increase in Qmax for Cu2+ (30.4 mg/g), Cd2+ (86.0 mg/g) and Pb2+ (205.9 mg/g).     

Removal of heavy metal ions from wastewater by chemically modified plant wastes as adsorbents: a review

The application of low-cost adsorbents obtained from plant wastes as a replacement for costly conventional methods of removing heavy metal ions from wastewater has been reviewed. It is well known that cellulosic waste materials can be obtained and employed as cheap adsorbents and their performance to remove heavy metal ions can be affected upon chemical treatment. In general, chemically modified plant wastes exhibit higher adsorption capacities than unmodified forms. Numerous chemicals have been used for modifications which include mineral and organic acids, bases, oxidizing agent, organic compounds, etc. In this review, an extensive list of plant wastes as adsorbents including rice husks, spent grain, sawdust, sugarcane bagasse, fruit wastes, weeds and others has been compiled. Some of the treated adsorbents show good adsorption capacities for Cd, Cu, Pb, Zn and Ni.     

The removal by crab shell of mixed heavy metal ions in aqueous solution

In order to examine the inhibition effect of other heavy metal ions on the removal by crab shell of heavy metal ions in aqueous solutions, three ions (Pb(2+), Cd(2+), Cr(3+)) were used in single, binary and ternary systems. In single heavy metal ion systems, the removals of Cr(3+) and Pb(2+) were much higher than that of Cd(2+). In binary heavy metal ions systems, Cd(2+) did not affect Pb(2+) removal while Cr(3+) had a severe inhibition effect on the removal of Pb(2+). Cd(2+) removal was slightly affected by the presence of Pb(2+); however, it was severely affected by the presence of Cr(3+). The inhibitory effect of Cd(2+) on Cr(3+) was relatively lower than that of Pb(2+).     

Removal of Ca(II) and Mg(II) from aqueous single metal solutions by mercerized cellulose and mercerized sugarcane bagasse grafted with EDTA dianhydride (EDTAD)

In a previous work, chemically modified cellulose (EMC) and sugarcane bagasse (EMMB) were prepared from mercerized cellulose (MC) and twice-mercerized sugarcane bagasse (MMB) using ethylenediaminetetraacetic dianhydride (EDTAD) as modifying agent. In this work we described in detail the modification of these materials in function of reaction time and EDTAD amount in the reaction media. The resistance of ester bond at pH 1, 2, 11, and 12 was also evaluated by FTIR. The results were used to model the hydrolysis process and a kinetic model was proposed. The modified materials (EMMB and EMC) were used to adsorb Ca²⁺ and Mg²⁺ ions from aqueous single solutions. The adsorption isotherms were developed at two pH values. These materials showed maximum adsorption capacities for Ca²⁺ and Mg²⁺ ions ranging from 15.6 to 54.1 mg/g and 13.5 to 42.6 mg/g, respectively. The modified material from sugarcane bagasse (EMMB) showed larger maximum adsorption capacities than modified material from cellulose (EMC) for both metals.     

Use of silica-immobilized humin for heavy metal removal from aqueous solution under flow conditions

Humin extracted from Sphagnum peat moss was immobilized in a silica matrix and column experiments were performed in order to evaluate the removal and recovery of metal ions from aqueous solution under flow conditions. These experiments also allowed testing the recycling capacity of the column. Single-element solutions of Cu(II) and Pb(II), and a multi-metal solution containing Cd(II), Cu(II), Pb(II), Ni(II), and Cr(III) were passed through the columns at a flow rate of 2 ml/min. A 0.5 M sodium citrate solution was used as the stripping agent in the metal-ion recovery process. Humin immobilized in the silica matrix exhibited a similar, and in some cases, even a higher capacity than other biosorbents for the removal of metal ions from aqueous solutions under flow conditions. The sodium citrate was effective in removing Cu(II), Pb(II), Cd(II), and Ni(II) from the metal saturated column. The selectivity of the immobilized biomass was as follows: Cr(III)>Pb(II)>Cu(II)>Cd(II)>Ni(II). This investigation provides a new, environmentally friendly and cost-effective possibility to clean up heavy-metal contaminated wastewaters by using the new silica-immobilized humin material.     

Extraction and characterization of wax from sugarcane bagasse and the enzymatic hydrolysis of dewaxed sugarcane bagasse

Extraction of high-value products from agricultural wastes is an important component for sustainable bioeconomy development. In this study, wax extraction from sugarcane bagasse was performed and the beneficial effect of dewaxing pretreatment on the enzymatic hydrolysis was investigated. About 1.2% (w/w) of crude sugarcane wax was obtained from the sugarcane bagasse using the mixture of petroleum ether and ethanol (mass ratio of 1:1) as the extraction agent. Results of Fourier-transform infrared characterization and gas chromatography–mass spectrometry qualitative analysis showed that the crude sugarcane wax consisted of fatty fractions (fatty acids, fatty aldehydes, hydrocarbons, and esters) and small amount of lignin derivatives. In addition, the effect of dewaxing pretreatment on the enzymatic hydrolysis of sugarcane bagasse was also investigated. The digestibilities of cellulose and xylan in dewaxed sugarcane bagasse were 18.7 and 10.3%, respectively, compared with those of 13.1 and 8.9% obtained from native sugarcane bagasse. The dewaxed sugarcane bagasse became more accessible to enzyme due to the disruption of the outermost layer of the waxy materials.     

Adsorption of metal complex dyes from aqueous solutions by pine sawdust

An attempt to alleviate the problem caused by the presence of metal complex dyes, mostly used in textile industries, in the textile effluents was undertaken. The effects of adsorbent particle size, pH, adsorbent dose, contact time and initial dye concentrations on the adsorption of metal complex dyes by pine sawdust was investigated. Acidic pH was favorable for the adsorption of metal complex dyes. A contact time of 120 min was required to reach the equilibrium. The experimental isotherm data were analyzed using the Langmuir, Freundlich and Temkin equations. The equilibrium data fit well the Langmuir isotherm. The monolayer adsorption capacities are 280.3 and 398.8 mg dye per g of pine sawdust for Metal Complex Blue and Metal Complex Yellow, respectively. The results indicate that pine sawdust could be employed as low-cost alternative to commercial activated carbon in aqueous solution for the removal of metal complex dyes.     

Fractionation of sugarcane bagasse by hydrothermal treatment

Hydrothermal treatment of sugarcane bagasse was conducted using a semi-batch reactor to develop a new biomass fractionation method that has low impact in the environment. A continuously increasing temperature was used in this treatment. It was found that hemicellulose and lignin could be mainly extracted as a water-soluble fraction at 200-230 degrees C, while the cellulose fraction was hydrolyzed at higher temperatures (230-280 degrees C) or recovered as solid residue from this treatment. Detailed analyses of the solid residue indicated that the crystal structure and the chemical composition of the residue were in good accordance with those of untreated crystalline cellulose. These experimental and analytical findings show that this method is promising for removal of hemicellulose and lignin from woody biomass without any catalyst and organic solvent.     

Nonlinear modelisation of heavy metal removal from aqueous solution using Ulva lactuca algae

After extensive analysis, Ulva lactuca dried algae, collected from the Monastir coastal zone, was proven to be successful as an adsorbent for the removal of certain inorganic pollutants. The main objective of this study was the nonlinear modeling of heavy metal removal from an aqueous solution, using a freely available and well analyzed biomaterial, as well as the evaluation of its efficacy on various metal ion sorptions. Although relatively low specific surface area, compared to more conventional adsorbents, the selected biomaterial displays very interesting retention capacities when used with aqueous inorganic pollutants. The pseudo, first and second-order kinetic models were used to investigate the kinetic retention mechanism. Assuming the nonlinear form, the results indicate that the retention mechanism is diffusion controlled. Concerning the heavy metal uptake capacity, it was found that the selected biomaterial has a retention capacity of 67 mg g⁻¹ of Ni(II), 112 mg g⁻¹ of Cu(II), 127 mg g⁻¹of Cd(II) and 230 mg g⁻¹ of Pb(II).