Conversion of an MMP-potent scaffold to an MMP-selective HER-2 sheddase inhibitor via scaffold hybridization and subtle P1' permutations

A series of beta-sulfonamide piperidine hydroxamates were prepared and shown to be potent inhibitors of the human epidermal growth factor receptor-2 (HER-2) sheddase with excellent selectivity against MMP-1, -2, -3, and -9. This was achieved by exploiting subtle differences within the otherwise highly conserved S(1)(') binding pocket of the active sites within the metalloprotease family. In addition, it was discovered that the introduction of polarity to the P(1) and P(1)(') groups reduced the projected human clearance.     

A new structural theme in C2-symmetric HIV-1 protease inhibitors: ortho-substituted P1/P1' side chains

In this report, the rapid syntheses of 24 novel C2-symmetric HIV-1 protease inhibitors are described. Two ortho-iodobenzyloxy containing C-terminal duplicated inhibitors served as starting materials for microwave-enhanced palladium(0)-catalyzed carbon-carbon bond forming reactions (Suzuki, Sonogashira, Heck, and Negishi). Highly potent inhibitors equipped with ortho-functionalized P1/P1' side chains as the structural theme were identified. Computational efforts were applied to study the binding mode of this class of inhibitors and to establish structure-activity relationships. The overall orientation of the inhibitors in the active site was reproduced by docking which suggested three possible conformations of the P1/P1' groups of which two seem more plausible.     

Optimization of P1-P3 groups in symmetric and asymmetric HIV-1 protease inhibitors.

HIV-1 protease is an important target for treatment of AIDS, and efficient drugs have been developed. However, the resistance and negative side effects of the current drugs has necessitated the development of new compounds with different binding patterns. In this study, nine C-terminally duplicated HIV-1 protease inhibitors were cocrystallised with the enzyme, the crystal structures analysed at 1.8-2.3 A resolution, and the inhibitory activity of the compounds characterized in order to evaluate the effects of the individual modifications. These compounds comprise two central hydroxy groups that mimic the geminal hydroxy groups of a cleavage-reaction intermediate. One of the hydroxy groups is located between the delta-oxygen atoms of the two catalytic aspartic acid residues, and the other in the gauche position relative to the first. The asymmetric binding of the two central inhibitory hydroxyls induced a small deviation from exact C2 symmetry in the whole enzyme-inhibitor complex. The study shows that the protease molecule could accommodate its structure to different sizes of the P2/P2' groups. The structural alterations were, however, relatively conservative and limited. The binding capacity of the S3/S3' sites was exploited by elongation of the compounds with groups in the P3/P3' positions or by extension of the P1/P1' groups. Furthermore, water molecules were shown to be important binding links between the protease and the inhibitors. This study produced a number of inhibitors with Ki values in the 100 picomolar range.     

Design of P1' and P3' residues of trivalent thrombin inhibitors and their crystal structures

Synthetic bivalent thrombin inhibitors comprise an active site blocking segment, a fibrinogen recognition exosite blocking segment, and a linker connecting these segments. Possible nonpolar interactions of the P1' and P3' residues of the linker with thrombin S1' and S3' subsites, respectively, were identified using the "Methyl Scan" method [Slon-Usakiewicz et al. (1997) Biochemistry 36, 13494-13502]. A series of inhibitors (4-tert-butylbenzenesulfonyl)-Arg-(D-pipecolic acid)-Xaa-Gly-Yaa-Gly-betaAla-Asp-Tyr-Glu-Pro-Ile-Pro-Glu-Glu-Ala- (be ta-cyclohexylalanine)-(D-Glu)-OH, in which nonpolar P1' residue Xaa or P3' residue Yaa was incorporated, were designed and improved the affinity to thrombin. Substitution of the P3' residue with D-phenylglycine or D-Phe improved the K(i) value to (9.5 +/- 0.6) x 10(-14) or 1.3 +/- 0.5 x 10(-13) M, respectively, compared to that of a reference inhibitor with Gly residues at Xaa and Yaa residues (K(i) = (2.4 +/- 0.5) x 10(-11) M). Similarly, substitution of the P1' residue with L-norleucine or L-beta-(2-thienyl)alanine lowered the K(i) values to (8.2 +/- 0.6) x 10(-14) or (5.1 +/- 0.4) x 10(-14) M, respectively. The linker Gly-Gly-Gly-betaAla of the inhibitors in the previous sentence was simplified with 12-aminododecanoic acid, resulting in further improvement of the K(i) values to (3.8 +/- 0.6) x 10(-14) or (1.7 +/- 0.4) x 10(-14) M, respectively. These K(i) values are equivalent to that of natural hirudin (2.2 x 10(-14) M), yet the size of the synthetic inhibitors (2 kD) is only one-third that of hirudin (7 kD). Two inhibitors, with L-norleucine or L-beta-(2-thienyl)alanine at the P1' residue and the improved linker of 12-aminododecanoic acid, were crystallized in complex with human alpha-thrombin. The crystal structures of these complexes were solved and refined to 2.1 A resolution. The Lys(60F) side chain of thrombin moved significantly and formed a large nonpolar S1' subsite to accommodate the bulky P1' residue.     

Determination of the P1', P2' and P3' subsite-specificity of factor Xa

Factor Xa is a central protease in the coagulation cascade and the target for many anticoagulant compounds currently under development. The preferences of the enzyme for substrates incorporating residues N-terminal to the cleavage site (P1, P2, etc.) have been elucidated, but little is known of its preferences for residues C-terminal to the cleavage site (P1', P2', etc.). The preferences of bovine factor Xa for substrate residues in the P1', P2' and P3' positions were mapped using fluorescence-quenched substrates. Bovine factor Xa, often used as a model for factor Xa, was most selective for the P2' position, less selective at the P1' position and almost completely non-selective at the P3' position. It appears that while the prime side subsites of factor Xa impose some selectivity towards substrates, the influence of these sites on factor Xa cleavage specificity is relatively low in comparison to related enzymes such as thrombin.     

4-hydroxy-5,6-dihydro-2H-pyran-2-ones.3. Bicyclic and hetero-aromatic ring systems as 3-position scaffolds to bind to S1' and S2' of the HIV-1 protease enzyme.

5,6-Dihydro-2H-pyran-2-ones are potent inhibitors of HIV-1 protease, which bind to the S1, S2, S1', and S2' pockets and have a unique binding mode with the catalytic aspartyl groups and the flap region of the enzyme. Efforts to explore 3-position heterocyclic scaffolds that bind to the S1' and S2' pockets have provided a number of selected analogs that display high HIV-1 protease inhibitory activity. reserved.     

New pyrazolyl and thienyl aminohydantoins as potent BACE1 inhibitors: exploring the S2' region

The proteolytic enzyme β-secretase (BACE1) plays a central role in the synthesis of the pathogenic β-amyloid in Alzheimer's disease. SAR studies of the S2' region of the BACE1 ligand binding pocket with pyrazolyl and thienyl P2' side chains are reported. These analogs exhibit low nanomolar potency for BACE1, and demonstrate >50- to 100-fold selectivity for the structurally related aspartyl proteases BACE2 and cathepsin D. Small groups attached at the nitrogen of the P2' pyrazolyl moiety, together with the P3 pyrimidine nucleus projecting into the S3 region of the binding pocket, are critical components to ligand's potency and selectivity. P2' thiophene side chain analogs are highly potent BACE1 inhibitors with excellent selectivity against cathepsin D, but only modest selectivity against BACE2. The cell-based activity of these new analogs tracked well with their increased molecular binding with EC(50) values of 0.07-0.2 μM in the ELISA assay for the most potent analogs.     

P2-P1' macrocyclization of P2 phenylglycine based HCV NS3 protease inhibitors using ring-closing metathesis

Macrocyclization is a commonly used strategy to preorganize HCV NS3 protease inhibitors in their bioactive conformation. Moreover, macrocyclization generally leads to greater stability and improved pharmacokinetic properties. In HCV NS3 protease inhibitors, it has been shown to be beneficial to include a vinylated phenylglycine in the P2 position in combination with alkenylic P1' substituents. A series of 14-, 15- and 16-membered macrocyclic HCV NS3 protease inhibitors with the linker connecting the P2 phenylglycine and the alkenylic P1' were synthesized by ring-closing metathesis, using both microwave and conventional heating. Besides formation of the expected macrocycles in cis and trans configuration as major products, both ring-contracted and double-bond migrated isomers were obtained, in particular during formation of the smaller rings (14- and 15-membered rings). All inhibitors had K(i)-values in the nanomolar range, but only one inhibitor type was improved by rigidification. The loss in inhibitory effect can be attributed to a disruption of the beneficial π-π interaction between the P2 fragment and H57, which proved to be especially deleterious for the d-phenylglycine epimers.     

Thiol-based angiotensin-converting enzyme 2 inhibitors: P1' modifications for the exploration of the S1' subsite

Explorations of the S(1') subsite of ACE2 via modifications of the P(1') methylene biphenyl moiety of thiol-based metalloprotease inhibitors led to improvements in ACE2 selectivity versus ACE and NEP, while maintaining potent ACE2 inhibition.     

New thiol inhibitors of Clostridium histolyticum collagenase. Importance of the P3' position

An extensive series of synthetic mercaptotripeptides (HS-CH2-CH2-CO-Pro-Yaa) was prepared, and the inhibitory constants were determined on the Clostridium histolyticum collagenase. Among the factors which control the optimal binding of these inhibitors, we found that the presence of a free C-terminal carboxylate group in the position P3' of the compounds is of primary importance. In general, the esterification of this carboxylate group decreased the potency of the inhibitors by two orders of magnitude. We observed also that the enzyme favored the inhibitors having a long linear apolar or basic side-chain at the position P3'. The present data suggest a large S3' subsite of the C. histolyticum collagenase. The compound which contains a homoarginine residue at the P3' position with a Ki of 0.2 microM proved to be the most potent synthetic inhibitor known to date for the C. histolyticum collagenase.     

Human Ras converting enzyme endoproteolytic specificity at the P2' and P3' positions of K-Ras-derived peptides

The membrane associated endoprotease, hRCE1, is responsible for one step in Ras membrane localization. The "CAAX" sequence at the C-terminal of farnesylated Ras proteins is cleaved by hRCE1 to yield an AAX tri-peptide. We found that an 8-aa K-Ras-derived "CAA" peptide, KSKTKC(farnesyl)VI, was a better substrate for hRCE1 than a KSKTKC(f)VIM "CAAX" peptide. When we examined hRCE1 activity on the same K-Ras core peptide with H-Ras (VLS) or N-Ras (VVM) C-terminal AAX sequences, we also found that in each case, the CAA peptides were better hRCE1 substrates. For each peptide set we examined, the P2' (A) and P3' (X) positions appeared independent in influencing hRCE1 activity on peptide substrates. We found that at the P3' position, methionine was better than serine; while at the P2' position, isoleucine and valine were better than leucine. Additionally, we found that a similar noncleaved peptide (modified at P'2 with a nitrophenyl group) could act as a competitive inhibitor of the reaction. Thus, hRCE1 has important functional interaction with the P2' and P3' substrate positions in addition to the farnesylated cysteine at the scissile bond site. This data could be useful in design of peptidomimetic inhibitors of hRCE1. Such inhibitors may be useful in treatment of cancer and inflammatory disease.     

Analysis of subsite preferences of HIV-1 proteinase using MA/CA junction peptides substituted at the P3-P1' positions

The residues P3, P2, P1, and P1' of a peptide corresponding to the matrix/capsid protein junction in the HIV-1 gag protein (Ser-Gln-Asn-Tyr-Pro-Ile-Val) were systematically replaced and the effect of these single amino acid substitutions on the hydrolysis of each peptide by HIV-1 proteinase was studied. Subsites S1 and S1' of the enzyme showed explicit preference for hydrophobic moieties, but beta-branched amino acids and proline are not tolerated in S1. The S2 subsite shows a preference for small polar and apolar amino acids; it may be occupied by Asn, Asp, Glu, Cys, Ala, or Val, other substitutions, especially by Gln and Ser, prevent hydrolysis of the peptides. In subsite S3 all amino acids except proline can be accommodated.     

Design and synthesis of HIV-1 protease inhibitors. Novel tetrahydrofuran P2/P2'-groups interacting with Asp29/30 of the HIV-1 protease. Determination of binding from X-ray crystal structure of inhibitor protease complex

A series of HIV-1 protease inhibitors having new tetrahydrofuran P2/P2' groups have been synthesised and tested for protease inhibition and antiviral activity. Six novel 4-aminotetrahydrofuran derivatives were prepared starting from commercially available isopropylidene-alpha-D-xylofuranose yielding six symmetrical and six unsymmetrical inhibitors. Promising sub nanomolar HIV-1 protease inhibitory activities were obtained. The X-ray crystal structure of the most potent inhibitor (23, K(i) 0.25 nM) co-crystallised with HIV-1 protease is discussed and the binding compared with inhibitors 1a and 1b.     

Design and identification of selective HER-2 sheddase inhibitors via P1' manipulation and unconventional P2' perturbations to induce a molecular metamorphosis

In an effort to obtain a MMP selective and potent inhibitor of HER-2 sheddase (ADAM-10), the P1' group of a novel class of (6S,7S)-7-[(hydroxyamino)carbonyl]-6-carboxamide-5-azaspiro[2.5]octane-5-carboxylates was attenuated and the structure-activity relationships (SAR) will be discussed. In addition, it was discovered that unconventional perturbation of the P2' moiety could confer MMP selectivity, which was hypothesized to be a manifestation of the P2' group effecting global conformational changes.     

Increased antiviral activity of cyclic urea HIV protease inhibitors by modifying the P1/P1' substituents.

A series of alkyl substituted P1/P1' analogs was prepared in an attempt to increase translation of the 3-aminoindazole class of HIV protease inhibitors. Increasing the lipophilicity of the P1/P1' residues dramatically improved translation of enzyme activity to antiviral activity in the whole cell assay.     

Novel spirocyclic pyrrolidones as P2/P1 mimetics in potent inhibitors of HIV-1 protease

We have developed concise and efficient syntheses of novel spirocyclic pyrrolidones 1-3, which involve the alkylation of pyrrolidone precursor 13 with 1,5-dibromopentane, 16 and 15, followed by an in situ lactamization. Conjugates of 1 and 2 with P1'/P2' hydroxy-indanolamine moiety resulted in novel and potent inhibitors of HIV-1 protease 25 and 26, suggesting that 1 and 2 are novel P2/P1 HIV-PI mimetics.     

Potent and selective P2-P3 ketoamide inhibitors of cathepsin K with good pharmacokinetic properties via favorable P1', P1, and/or P3 substitutions

A series of ketoamides were synthesized and evaluated for inhibitory activity against cathepsin K. Exploration of the interactions between achiral P(2) substituents and the cysteine protease based on molecular modelling suggestions resulted in potent cathepsin K inhibitors that demonstrated high selectivity versus cathepsins B, H, and L. Subsequent modifications of the P(3), P(1), and P(1') moieties afforded orally bioavailable inhibitors.     

Novel,potent phenethylamide inhibitors of the hepatitis C virus (HCV) NS3 protease: probing the role of P2 aryloxyprolines with hybrid structures

Synthesis of hybrid HCV NS3 protease/NS4A inhibitors having the 4,4-difluoroaminobutyric acid (difluoroAbu) phenethylamides as P1-P1' and quinolyloxyprolines as P2 fragments led to 7 (IC(50) 54 nM). Molecular modelling suggests that this potent tripeptide inhibitor utilizes interactions in the S1', S1, S2, S3 and S4 sites of the protease.     

Symmetric fluoro-substituted diol-based HIV protease inhibitors. Ortho-fluorinated and meta-fluorinated P1/P1'-benzyloxy side groups significantly improve the antiviral activity and preserve binding efficacy.

HIV-1 protease is a pivotal enzyme in the later stages of the viral life cycle which is responsible for the processing and maturation of the virus particle into an infectious virion. As such, HIV-1 protease has become an important target for the treatment of AIDS, and efficient drugs have been developed. However, negative side effects and fast emerging resistance to the current drugs have necessitated the development of novel chemical entities in order to exploit different pharmacokinetic properties as well as new interaction patterns. We have used X-ray crystallography to decipher the structure-activity relationship of fluoro-substitution as a strategy to improve the antiviral activity and the protease inhibition of C2-symmetric diol-based inhibitors. In total we present six protease-inhibitor complexes at 1.8-2.3 A resolution, which have been structurally characterized with respect to their antiviral and inhibitory activities, in order to evaluate the effects of different fluoro-substitutions. These C2-symmetric inhibitors comprise mono- and difluoro-substituted benzyloxy side groups in P1/P1' and indanoleamine side groups in P2/P2'. The ortho- and meta-fluorinated P1/P1'-benzyloxy side groups proved to have the most cytopathogenic effects compared with the nonsubstituted analog and related C2-symmetric diol-based inhibitors. The different fluoro-substitutions are well accommodated in the protease S1/S1' subsites, as observed by an increase in favorable Van der Waals contacts and surface area buried by the inhibitors. These data will be used in the development of potent inhibitors with different pharmacokinetic profiles towards resistant protease mutants.     

New thiol inhibitor of Achromobacter iophagus collagenase. Specificity of the enzyme's S3' subsite

New synthetic mercaptotripeptides (HS-CH2-CH2-CO-Pro-Yaa) which inhibit Achromobacter iophagus collagenase were produced in order to obtain more powerful bacterial collagenase inhibitors than currently available, and to investigate the specificity of the S3' subsite of the enzyme. Since similar binding constants were found for inhibitors carrying uncharged residues of various sizes in the P3' position (Yaa = Ala, Leu, Phe, Pro, Hyp) steric hindrance at the collagenase S3' appears relatively limited. The compound (HS-CH2-CH2-CO-Pro-Arg), which carries an arginine residue in the position P3' and had the highest inhibition constant of the series tested (Ki = 0.5 microM), proved to be the strongest inhibitor so far reported in the literature. The weakest in the present series was the compound (HS-CH2-CH2-CO-Pro-Asp) which carries an aspartic residue in position P3' and had a Ki = 70 microM. The present work revealed that the charged groups in the P3' position play a key role in the interaction of the inhibitors with the enzyme.