Ionic interaction of myosin loop 2 with residues located beyond the N-terminal part of actin probed by chemical cross-linking

To probe ionic contacts of skeletal muscle myosin with negatively charged residues located beyond the N-terminal part of actin, myosin subfragment 1 (S1) and actin split by ECP32 protease (ECP-actin) were cross-linked with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC). We have found that unmodified S1 can be cross-linked not only to the N-terminal part, but also to the C-terminal 36 kDa fragment of ECP-actin. Subsequent experiments performed on S1 cleaved by elastase or trypsin indicate that the cross-linking site in S1 is located within loop 2. This site is composed of Lys-636 and Lys-637 and can interact with negatively charged residues of the 36 kDa actin fragment, most probably with Glu-99 and Glu-100. Cross-links are formed both in the absence and presence of MgATP.P(i) analog, although the addition of nucleotide decreases the efficiency of the cross-linking reaction.     

Nucleotide-induced movements in the myosin head near the converter region

Structural changes in subfragment 1 of skeletal muscle myosin were investigated by cross-linking trypsin-cleaved S1 with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide. In the absence of nucleotide the alkali light chains are cross-linked to the 27 kDa heavy chain fragment; the presence of MgATP reduces the efficiency of this reaction. On the other hand, MgATP promotes the cross-link formation between the N-terminal 27 kDa and C-terminal 20 kDa fragments of the heavy chain. The chemical cleavage of the cross-linked heavy chains fragments with N-chlorosuccinimide and hydroxylamine indicates that the cross-links are formed between the regions spanning residues 131-204 and 699-809. These results indicate that the two regions of the heavy chain that are relatively distant in nucleotide-free skeletal S1 [Rayment et al. (1993) Science 261, 50-58] can potentially interact upon addition of nucleotide.     

Spatial proximity of the glycine-rich loop and the SH2 thiol in myosin subfragment 1

Subfragment 1 (S1) prepared from rabbit skeletal muscle myosin was digested with trypsin to cleave the 95K heavy chain into three pieces, i.e., the 23K, 50K, and 20K fragments. The trypsin-treated S1 was then cross-linked with p-nitrophenyl iodoacetate. The cross-linker bridged one of the reactive thiols (SH2) in the 20K fragment and a lysine residue in the 23K fragment [Hiratsuka, T. (1987) Biochemistry 26, 3168-3173]. Location of the lysine residue was mapped along the 23K fragment by "end-label fingerprinting", which employed site-directed antibodies against the N-terminus of the 23K fragment and against the C-terminus of the 24K fragment (the 23K fragment plus nine extra residues at its C-terminus). The mapping revealed that Lys-184 or Lys-189 was the residue cross-linked with SH2. Since the cross-linker used here spans only several angstroms, the result indicates that Lys-184 or Lys-189 is very close to SH2 in the three-dimensional structure of myosin head. Examination of the primary structure of the 23K fragment has revealed that these lysine residues are in and very close to the so-called "glycine-rich loop", whose sequence is highly homologous to those of nucleotide-binding sites of various nucleotide-binding proteins.     

Changes at the interface of the N- and C-terminal parts of the heavy chain of myosin subfragment 1

It has been previously shown that in the M-MgADP-P(i) state, where the myosin head adopts a pre-power stroke conformation, treatment of trypsin-split subfragment 1 of skeletal muscle myosin with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) results in cross-linking of the C-terminal fragment of the heavy chain of S1 -- most probably its converter region -- to the N-terminal S1 heavy-chain fragment, generating a product of 44 kDa [Biochim. Biophys. Acta 1481 (2000) 55]. The results described here show that this product is neither generated in the absence of nucleotide nor in the presence of MgADP or MgPP(i). The 44 kDa cross-linking product can be formed when S1 treated with EDC is complexed with MgADP-AlF(4) or MgADP-V(i) (MgADP-P(i) analogs) and with MgADP-BeF(x), MgATP gamma S or MgAMPPNP (MgATP analogs). The results suggest structural differences between MgATP- or MgADP-P(i)-bound S1, and MgADP-bound or nucleotide-free S1, in spatially close regions of their N- and C-terminal heavy-chain fragments.     

A novel restricted photoaffinity spin-labeled non-nucleoside ATP analogue as a covalently attached reporter group of the active site of Myosin subfragment 1

The photoaffinity spin-labeled non-nucleoside ATP analogue, 2-(4-azido-2-nitrophenyl)amino-2,2-(1-oxyl-2,2,6,6-tetramethyl-4-piperidylidene)di(oxymethylene)ethyl triphosphate (SSL-NANTP), has been shown to be a substrate for skeletal mysoin subfragment 1 (S1) that can be photoincorporated at the active site of S1 [Chen, X., et al. (2000) Bioconjugate Chem. 11, 725-733]. Electron paramagnetic resonance spectroscopy shows that the probe undergoes restricted motion with respect to the protein. The parent compound, NANTP (2-[(4-azido-2-nitrophenyl)amino]ethyl triphosphate), is specifically photoincorporated at Trp-130 on the amino-terminal 23 kDa tryptic fragment in rabbit skeletal myosin. Surprisingly, amino acid sequence analysis shows that SSL-NANTP is photoincorporated on the carboxy-terminal 20 kDa tryptic fragment at Lys-681 on the side opposite Trp-130 in the nucleotide pocket. This is the first direct evidence showing that this residue in the 20 kDa tryptic fragment is close enough to the active site to be photolabeled by trapped ATP analogues. After actin treatment in the presence of MgATP, SSL-NANDP-labeled myosin S1 had normal ATPase activity, indicating that photolabeling did not significantly alter the enzymatic properties of S1. Photoincorporated SSL-NANDP was bound inside the nucleotide site of S1, with an effective concentration of 20 mM as judged by the concentration of MgADP needed to displace it. Molecular dynamics simulations suggest that the ability of NANTP and SSL-NANTP to photolabel different sites results from different orientations of the phenyl ring in the active site. For SSL-NANTP, the p-azido group on the phenyl ring points toward Lys-681. For NANTP, it points in the opposite direction toward Trp-130.     

Modification of the actin interface of skeletal myosin subfragment-1 by treatment with dibromobimane

Recently, by treating the head portion of skeletal myosin subfragment-1 (S1) with the bifunctional agent dibromobimane, we introduced an intramolecular covalent cross-link which resulted in the stabilisation of an internal loop in the heavy chain structure of the head [Mornet et al. (1984) Proc. Natl Acad. Sci. USA 82, 1658-1662]. In order to define the functional properties of this new S1 conformational state, we have first determined the experimental conditions for the optimum modification of S1 by dibromobimane. We finally settled on a 60% yield of cross-linked S1. Because the modification occurs between the 50-kDa and the 20-kDa tryptic heavy chain fragments which have been postulated to be involved in the interaction of native S1 with actin, we have investigated the association of dibromobimane-treated S1 with actin, using chemical cross-linking of their rigor complex with 1-ethyl-3-[3-(dimethylamino)propyl] carbodiimide. The cross-linked species obtained were analyzed by polyacrylamide gel electrophoresis and compared with those known for unmodified S1. The carbodiimide-catalyzed linkage between actin and dibromobimane-modified S1 led to a singlet protein band migrating with an apparent molecular mass of 155 kDa, in contrast to the usual doublet bands of 175 kDa and 185 kDa produced with native S1. This result suggests that a change has occurred at the actin interface on the dibromobimane-treated S1 heavy chain. The covalent complex generated by carbodiimide cross-linking between actin and dibromobimane-modified S1 (27-kDa + 50-kDa + 20-kDa fragments) was submitted to chemical hydrolysis with hydroxylamine. The nature of the products identified is consistent with the conclusion that the internal freezing of the heavy chain structure by dibromobimane induces the loss of the ability to cross-linkage of the actin site on the 20-kDa domain but does not affect the conformation of the second site on the 50-kDa segment, which becomes the unique actin region cross-linkable by actin.     

Interaction of the heavy chain of gizzard myosin heads with skeletal F-actin

To probe the molecular properties of the actin recognition site on the smooth muscle myosin heavy chain, the rigor complexes between skeletal F-actin and chicken gizzard myosin subfragments 1 (S1) were investigated by limited proteolysis and by chemical cross-linking with 1-ethyl-3-[3-(dimethyl-amino)propyl]carbodiimide. Earlier, these approaches were used to analyze the actin site on the skeletal muscle myosin heads [Mornet, D., Bertrand, R., Pantel, P., Audemard, E., & Kassab, R. (1981) Biochemistry 20, 2110-2120; Labbé, J.P., Mornet, D., Roseau, G., & Kassab, R. (1982) Biochemistry 21, 6897-6902]. In contrast to the case of the skeletal S1, the cleavage with trypsin or papain of the sensitive COOH-terminal 50K-26K junction of the head heavy chain had no effect on the actin-stimulated Mg2+-ATPase activity of the smooth S1. Moreover, actin binding had no significant influence on the proteolysis at this site whereas it abolished the scission of the skeletal S1 heavy chain. The COOH-terminal 26K segment of the smooth papain S1 heavy chain was converted by trypsin into a 25K peptide derivative, but it remained intact in the actin-S1 complex. A single actin monomer was cross-linked with the carbodiimide reagent to the intact 97K heavy chain of the smooth papain S1. Experiments performed on the complexes between F-actin and the fragmented S1 indicated that the site of cross-linking resides within the COOH-terminal 25K fragment of the S1 heavy chain. Thus, for both the striated and smooth muscle myosins, this region appears to be in contact with F-actin.(ABSTRACT TRUNCATED AT 250 WORDS)     

The myosin SH2-50-kilodalton fragment cross-link: location and consequences

Some of us recently described a new interthiol cross-link which occurs in the skeletal myosin subfragment 1-MgADP complex between the reactive sulfhydryl group "SH2" (Cys-697) and a thiol (named SH chi) of the 50-kilodalton (kDa) central domain of the heavy chain; this link leads to the entrapment of the nucleotide at the active site [Chaussepied, P., Mornet, D., & Kassab, R. (1986) Proc. Natl. Acad. Sci. U.S.A. 83, 2037-2041]. In the present study, we identify SH chi as Cys-540 of the 50-kDa fragment. The portion of the heavy chain including this residue and also extending to Cys-522 that is cross-linkable to the "SH1" thiol [Ue, K. (1987) Biochemistry 26, 1889-1894] is near the SH2-SH1 region. Furthermore, various spectral and enzymatic properties of the (Cys697-Cys540)-N,N'-p-phenylenedimaleimide (pPDM)-cross-linked myosin chymotryptic subfragment 1 (S-1) were established and compared to those for the well-known (SH1-SH2)-pPDM-cross-linked S-1. The circular dichroism spectra of the new derivative were similar to those of native S-1 complexed to MgADP. At 15 mM ionic strength, (Cys697-Cys540)-S-1 binds very strongly to unregulated actin (Ka = 7 X 10(6) M-1), and the actin binding is very weakly affected by ionic strength. Joining actin with the (Cys697-Cys540)-S-1 heavy chain, using 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide, produces different species than does joining unmodified S-1 with actin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interaction between the heavy and the regulatory light chains in smooth muscle myosin subfragment 1.

The interaction between the heavy and the regulatory light chains within chicken gizzard myosin heads was investigated by using a zero-length chemical cross-linker, 1-ethyl-3-[3-(dimethylamino)-propyl]carbodiimide (EDC). The chicken gizzard subfragment 1 (S-1) used was treated with papain so that the heavy chain was partly cleaved into the NH2-terminal 72K and the COOH-terminal 24K fragments and the regulatory light chain into the 16K fragment. S-1 was reacted with EDC either alone or in the presence of ATP or F-actin. In all cases, the 16K fragment of the regulatory light chain formed a covalent cross-link with the 24K heavy chain fragment but not with the 72K fragment. The 38K cross-linked peptide, which was the product of cross-linking between the 16K light chain and the 24K heavy chain fragments, was isolated and further cleaved with cyanogen bromide and arginylendopeptidase. Smaller cross-linked peptides were purified by reverse-phase HPLC and then characterized by amino acid analysis and sequencing. The results indicated that cross-linking occurred between Lys-845 in the heavy chain and Asp-168, Asp-170, or Asp-171 in the regulatory light chain. The position of the cross-linked lysine was only three amino acid residues away from the invariant proline residue mapped as the S-1-rod hinge by McLachlan and Karn [McLachlan, A. D., & Karn, J. (1982) Nature (London) 299, 226-231]. We propose that the COOH-terminal region of the regulatory light chain is located in the neck region of myosin and that this region and the phosphorylation site of the regulatory light chain together may play a role in the phosphorylation-induced conformational change of gizzard myosin.     

Glutamic acid-88 is close to SH-1 in the tertiary structure of myosin subfragment 1

The thiol-specific photoactivatable reagent benzophenone iodoacetamide (BPIA) can be selectively incorporated into the most reactive thiol, SH-1, of myosin S1, and upon photolysis, an intramolecular cross-link is formed between SH-1 and the N-terminal 25-kDa region of S1. If a Mg2+-nucleotide is present during photolysis, cross-links can be formed either with the 25-kDa region or with the central 50-kDa region [Lu et al. (1986) Proc. Natl. Acad. Sci. U.S.A. 83, 6392]. Comparison of the peptide maps of cross-linked and un-cross-linked S1 heavy chains indicates that the segment located about 12-16 kDa from the N-terminus of the heavy chain can be cross-linked to SH-1 via BPIA independently of the presence of a nucleotide whereas the segment located 57-60 kDa from the N-terminus can be cross-linked to SH-1 only in the presence of a Mg2+-nucleotide [Sutoh & Lu (1987) Biochemistry 26, 4511]. In this report, S1 was labeled with radioactive BPIA, photolyzed in the absence of nucleotide, and then degraded with proteolytic enzymes. Peptides containing cross-links were isolated by liquid chromatography and subjected to amino acid sequence analyses. The results show that Glu-88 is the major site and Asp-89 and Met-92 are the minor sites involved in cross-linking with SH-1 (Cys-707) via BPIA. These residues are very near the reactive lysine residue (Lys-83) but relatively remote in the primary structure from the putative nucleotide binding region.     

Inhibitory effect of ATP analogs and actin on the modification of myosin subfragment 1 with 9-anthroylnitrile

The fluorescent probe, 9-anthroylnitrile (ANN), can selectively attach to Ser-180 at the ATP-binding site of subfragment 1 (S1) of skeletal muscle myosin [J. Biol. Chem. 278 (2003) 31891]. We have found that MgATP, MgATPgammaS, MgADP.AlF(4) or MgPP(i), but not MgADP, inhibit the incorporation of ANN into S1. The inhibitory effect of the nucleotide gamma-phosphate group (or its analog) on the modification of S1 with ANN can be explained by the contribution of Ser-180 to the binding of the nucleotide gamma-phosphate at the active site of S1. We have also observed that the incorporation of ANN into S1.MgADP complex is inhibited by actin. These experimental data strongly support the existence of nucleotide-promoted conformational changes revealed by crystal structures of S1 complexes with various nucleotide analogs. They also convincingly show an effect of actin on the environment of Ser-180 at the nucleotide binding site of S1.     

Functional characterization of the secondary actin binding site of myosin II

The role of the interaction between actin and the secondary actin binding site of myosin (segment 565-579 of rabbit skeletal muscle myosin, referred to as loop 3 in this work) has been studied with proteolytically generated smooth and skeletal muscle myosin subfragment 1 and recombinant Dictyostelium discoideum myosin II motor domain constructs. Carbodiimide-induced cross-linking between filamentous actin and myosin loop 3 took place only with the motor domain of skeletal muscle myosin and not with those of smooth muscle or D. discoideum myosin II. Chimeric constructs of the D. discoideum myosin motor domain containing loop 3 of either human skeletal muscle or nonmuscle myosin were generated. Significant actin cross-linking to the loop 3 region was obtained only with the skeletal muscle chimera both in the rigor and in the weak binding states, i.e., in the absence and in the presence of ATP analogues. Thrombin degradation of the cross-linked products was used to confirm the cross-linking site of myosin loop 3 within the actin segment 1-28. The skeletal muscle and nonmuscle myosin chimera showed a 4-6-fold increase in their actin dissociation constant, due to a significant increase in the rate for actin dissociation (k(-)(A)) with no significant change in the rate for actin binding (k(+A)). The actin-activated ATPase activity was not affected by the substitutions in the chimeric constructs. These results suggest that actin interaction with the secondary actin binding site of myosin is specific for the loop 3 sequence of striated muscle myosin isoforms but is apparently not essential either for the formation of a high affinity actin-myosin interface or for the modulation of actomyosin ATPase activity.     

Selective cleavage at lysine of the 50 kDa-20 kDa connector loop segment of skeletal myosin S-1 by endoproteinase Arg-C

The reaction of endoproteinase Arg-C on the skeletal myosin head heavy chain was investigated through characterization of peptides and amino acid sequence analysis. The protease splits exclusively the 50 kDa-20 kDa junction at the lysine cluster spanning residues 639-641 and does not affect any other protease-sensitive region of the entire myosin heavy chain. The sensitivity of the cleavage to actin and nucleotide binding makes this protease a very specific conformational probe of S-1. The nicked S-1 derivative, containing an intact NH2-terminal 75 kDa fragment, may serve as a tool for gaining further insights into the domain structure and function of the myosin head.     

Interaction of myosin LYS-553 with the C-terminus and DNase I-binding loop of actin examined by fluorescence resonance energy transfer

Fluorescence resonance energy transfer (FRET) experiments were carried out in the absence of nucleotide (rigor) or in the presence of MgADP between fluorescent donor probes (IAEDANS (5((((2-iodoacetyl)amino)ethyl)amino)-naphthalene-1-sulfonic acid) at Cys-374 or DANSYL (5-dimethylamino naphthalene-1-(N-(5-aminopentyl))sulfonamide) at Gln-41 of actin and acceptor molecules (FHS (6-[fluorescein-5(and 6)-carboxamido] hexanoic acid succinimidyl ester) at Lys-553 of skeletal muscle myosin subfragment 1. The critical F?rster distance (R(0)) was determined to be 44 and 38 A for the IAEDANS-FHS and DANSYL-FHS donor-acceptor pairs, respectively. The efficiency of energy transfer between the acceptor molecules at Lys-553 of myosin and donor probes at Cys-374 or Gln-41 of actin was calculated to be 0.78 +/- 0.01 or 0.94 +/- 0.01, respectively, corresponding to distances of 35.6 +/- 0.4 A and 24.0 +/- 1.6 A, respectively. MgADP had no significant effect on the distances observed in rigor. Thus, rearrangements in the acto-myosin interface are likely to occur elsewhere than in the lower 50-kDa subdomain of myosin as its affinity for actin is weakened by MgADP binding.     

Conformational transitions within the head and at the head-rod junction in smooth muscle myosin studied with a limited proteolysis method

It was previously shown that tryptic digestion of subfragment 1 (S1) of skeletal muscle myosins at 0 degree C results in cleavage of the heavy chain at a specific site located 5 kDa from the NH2-terminus. This cleavage is enhanced by nucleotides and suppressed by actin and does not occur at 25 degrees C, except in the presence of nucleotide. Here we show a similar temperature sensitivity and protection by actin of an analogous chymotryptic cleavage site in the heavy chain of gizzard S1. The results support the view that the myosin head, in general, can exist in two different conformational states even in the absence of nucleotides and actin, and indicate that the heavy chain region 5 kDa from the NH2-terminus is involved in the communication between the sites of nucleotide and actin binding. We also show here for the first time that the S1-S2 junction in gizzard myosin can be cleaved by chymotrypsin and that this cleavage (observed in papain-produced S1 devoid of the regulatory light chain) is also temperature-dependent but insensitive to nucleotides and actin. It is suggested that the temperature-dependent alteration in the flexibility of the head-rod junction, which is apparent from these and similar observations on skeletal muscle myosin [Miller, L. & Reisler, E. (1985) J. Mol. Biol. 182, 271-279; Redowicz, M.J. & Strzelecka-Go?aszewska, H. (1988) Eur. J. Biochem. 177, 615-624], may contribute to the temperature dependence of some steps in the cross-bridge cycle.     

Mechanism of formation of actomyosin interface

Force generation in muscle results from binding of myosin to F-actin. ATP binding to myosin provides energy to dissociate actomyosin complex while the hydrolysis of ATP is needed for re-binding of myosin to F-actin. At the end of each cycle myosin and actin form a tight complex with a substantial interface area. We investigated the dynamics of formation of actomyosin interface in presence and absence of nucleotides by quenched flow cross-linking technique. We showed previously that myosin head (subfragment 1, S1) directly interacts with at least two monomers in the actin filament. The quenched flow cross-linking experiments revealed that the initial contact (in presence or absence of nucleotides) occurs between loop 635-647 of S1 and 1-12 N-terminal residues of one actin and, then, the second contact forms between loop 567-574 of S1 and the N terminus of the second actin. The distance between these two loops in S1 corresponds to the distance between N termini of two actins in the same strand (53 A) but is smaller than that between two actins from the different strands (102 A). The formation of the actomyosin complex proceeds in ordered sequence: S1 initially binds to one actin then binds with the second actin located in the same strand but probably closer to the barbed end of F-actin. The presence of nucleotides slows down the interaction of S1 with the second actin, which correlates with recently proposed cleft movement in a 50 kDa domain of S1. The sequential mechanism of formation of actomyosin interface starting from one end and developing towards the barbed end might be involved in force generation and directional movement in actin-myosin system.     

Functional, chymotryptically split actin and its interaction with myosin subfragment 1

We have prepared chymotryptically split actin that retains the characteristic properties of intact actin. Chymotryptic digestion of G-actin produces an intermediate 35-kilodalton (kDa) fragment and from this a final product of 33 kDa known as the C-terminal "core". These fragments remain attached to an N-terminal 10-kDa fragment. The 35-kDa-10-kDa complex is able to polymerize upon addition of KCl and MgCl2, like intact actin, whereas the 33-kDa-10-kDa complex is not. The 35-kDa-10-kDa complex is here termed "split actin". In the rigor state, split actin binds to myosin subfragment 1 (S-1) strongly, with the same stoichiometry as intact actin. In the rigor state, split actin forms a carbodiimide-induced cross-linked product with S-1; the cross-linking sites on the split actin and on S-1 were proved to be the N-terminal 10-kDa fragment of split actin and the 20-kDa domain of S-1. There was no cross-linking between the 50-kDa domain of S-1 and the 10 kDa of actin. Therefore, the structure of the split actin-S-1 complex differs somewhat from that of the complex with intact actin. The cross-linking of split actin to S-1 causes superactivation of S-1 ATPase to approximately the same extent as does cross-linking of intact actin, whereas non-cross-linked split actin activates S-1 ATPase to a lesser extent. The N-terminus of the 35-kDa fragment was found to be residue 45 (Val-45) by amino acid sequence analysis; so there is no residue missing in split actin.     

Photocross-linking from dinitrophenylated SH1 in myosin head. II. Cross-linked site on 50-kDa fragment

We reported in the preceding paper [Muno, D., et al. (1987) J. Biochem. 101, 661-669] that the dinitrophenyl group exclusively introduced to SH1 on the 20-kDa fragment of myosin subfragment 1 was cross-linked to the 50-kDa fragment by irradiation, and that limited trypsinolysis of the cross-linked S1 generated an 83-kDa peptide, a cross-linking product between the 20- and 50-kDa fragments. This paper will deal with the location of the cross-linked residue on the 50-kDa fragment. When the 83-kDa fragment labeled at SH2 with a fluorogenic SH reagent was subjected to bromocyanolysis, a main fluorescent band, which implied a cross-linked peptide, appeared in the position with an apparent molecular mass of 18.5-kDa on SDS-PAGE. On the other hand, another cross-linked peptide was obtained from a complete tryptic digest of a 83-kDa fragment rich fraction. Amino acid sequence analysis of the two cross-linked peptides revealed that the DNP moiety attached at SH1 was cross-linked with a residue in the segment of the heavy chain spanning the 485-493 region from the N-terminus of the heavy chain.     

Evidence for the association between two myosin heads in rigor acto-smooth muscle heavy meromyosin

The rigor complexes that formed between rabbit skeletal muscle F-actin and chicken gizzard heavy meromyosin (HMM), in which the heavy chains had been cleaved with trypsin into 24K, 50K, and 68K fragments, were examined by using the zero-length chemical cross-linker 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC). Two cross-linked products of approximate Mr 115K and 60K were generated. These products were not obtained by EDC treatment of HMM in the absence of F-actin. The HMM fragments that participated in cross-linking were identified by fluorescent labeling and amino acid composition studies. The 115K peptide was determined to be a covalently cross-linked complex that formed between actin and the COOH-terminal 68K fragment of the HMM heavy chain. Our results are in agreement with a previous study which proposed that the site of cross-linking between HMM and F-actin resides within the COOH-terminal 22K fragment of the myosin subfragment 1 heavy chain [Marianne-Pépin, T., Mornet, D., Bertrand, R., Labbé, J.-P., & Kassab, R. (1985) Biochemistry 24, 3024-3029]. The 60K peptide, however, was not a product of cross-linking between HMM and F-actin. On the basis of its amino acid composition, we concluded that this 60K peptide was a cross-linked dimer of the NH2-terminal 24K fragments of the HMM heavy chain. The cross-linking of acto-gizzard HMM significantly increased the Mg-ATPase activity of gizzard HMM without any observable phosphorylation of the regulatory (20K) light chains.(ABSTRACT TRUNCATED AT 250 WORDS)     

Differences in the ionic interaction of actin with the motor domains of nonmuscle and muscle myosin II.

Changes in the actin-myosin interface are thought to play an important role in microfilament-linked cellular movements. In this study, we compared the actin binding properties of the motor domain of Dictyostelium discoideum (M765) and rabbit skeletal muscle myosin subfragment-1 (S1). The Dictyostelium motor domain resembles S1(A2) (S1 carrying the A2 light chain) in its interaction with G-actin. Similar to S1(A2), none of the Dictyostelium motor domain constructs induced G-actin polymerization. The affinity of monomeric actin (G-actin) was 20-fold lower for M765 than for S1(A2) but increasing the number of positive charges in the loop 2 region of the D. discoideum motor domain (residues 613-623) resulted in equivalent affinities of G-actin for M765 and for S1. Proteolytic cleavage and cross-linking approaches were used to show that M765, like S1, interacts via the loop 2 region with filamentous actin (F-actin). For both types of myosin, F-actin prevents trypsin cleavage in the loop 2 region and F-actin segment 1-28 can be cross-linked to loop 2 residues by a carbodiimide-induced reaction. In contrast with the S1, loop residues 559-565 of D. discoideum myosin was not cross-linked to F-actin, probably due to the lower number of positive charges. These results confirm the importance of the loop 2 region of myosin for the interaction with both G-actin and F-actin, regardless of the source of myosin. The differences observed in the way in which M765 and S1 interact with actin may be linked to more general differences in the structure of the actomyosin interface of muscle and nonmuscle myosins.