Analysis of pCU1 replication origins: dependence of oriS on the plasmid-encoded replication initiation protein RepA

The broad-host-range replicon of the plasmid pCU1 has three origins of vegetative replication called oriB, oriS, and oriV. In the multi-origin replicon, individual origins can distinguish among replication factors provided by the host. It has been found that during replication in Escherichia coli polA(-) host, oriS was the only active origin of a mutant pCU1 derivative bearing a mutation in the gene encoding replication initiation protein RepA. To further investigate the capacity of oriS to function in an E. coli polA(-) host we constructed a number of clones of the basic replicon of pCU1 containing oriS as the only replication origin. An oriS construct created with pUC18 could transform the polA(-) strain when RepA was supplied in trans. When the oriS region (between nucleotides 290 and 832) was ligated to an antibiotic resistance Omega fragment, the construct could be recovered as a plasmid from polA(+) strain if functional RepA was provided in trans. Our results therefore indicate that the basic replicon of pCU1, containing oriS as the sole origin, does require RepA to initiate plasmid replication in E. coli     

Two-step method for curing Escherichia coli of ColE1-derived plasmids

To cure Escherichia coli for plasmids derived from the ColE1 replicon advantage is taken of the fact that maintenance of this replicon requires a wild-type allele of polA, encoding DNA polymerase I. Curing is achieved by cotransduction of a mutant polA allele with metE::Tn10, fadAB::Tn10 or other transposon insertions near polA. Reciprocal transduction to Met(+) Pol(+) or to Fad(+) Pol(+) ensures reestablishment of the original genotype except for loss of the plasmid. A set of useful bacterial strains is provided.     

Deletion analysis of the cloned replication origin region from bacteriophage M13.

A cloned 270-nucleotide fragment from the origin region of the M13 duplex replicative form DNA confers an M13-dependent replication mechanism upon the plasmid vector pBR322. This M13 insert permits M13 helper-dependent replication of the hybrid plasmid in polA cells which are unable to replicate the pBR322 replicon alone. Using in vitro techniques, we have constructed several plasmids containing deletions in the M13 DNa insert. The endpoints of these deletions have been determined by DNA sequence analysis and correlated with the transformation and replication properties of each plasmid. Characterization of these deletion plasmids allows the following conclusions. (i) The initiation site for M13 viral strand replication is required for helper-dependent propagation of the chimeric plasmid. (ii) A DNA sequence in the M13 insert, localized between 89 and 129 nucleotides from the viral strand initiation site, is necessary for efficient transformation of polA cells. A chimeric plasmid containing the viral strand initiation site, but lacking this additional 40 nucleotide M13 sequence, transforms helper-infected cells at a frequency approximately 10(4)-fold less than that of plasmids containing this additional DNA segment. (iii) The entire M13 complementary strand origin can be deleted without affecting M13-dependent transformation by the hybrid plasmids. We propose a model in which replication of one strand of duplex chimera initiates by nicking at the gene II protein nicking site in the viral strand of the M13 insert, followed by asymmetric single-strand synthesis. Initiation of the complementary strand possibly occurs within plasmid sequences.     

A facile and reversible method to decrease the copy number of the ColE1-related cloning vectors commonly used in Escherichia coli.

We report a technique which uses the cointegrate intermediate of transposon Tn1000 transposition as a means to lower the copy number of ColE1-type plasmids. The transposition of Tn1000 from one replicon to another is considered a two-step process. In the first step, the transposon-encoded TnpA protein mediates fusion of the two replicons to produce a cointegrate. In the second step, the cointegrate is resolved by site-specific recombination between the two transposon copies to yield the final transposition products: the target replicon with an integrated transposon plus the regenerated donor replicon. Using in vitro techniques, the DNA sequence of the Tn1000 transposon was altered so that cointegrate formation occurs but resolution by the site-specific recombination pathway is blocked. When this transposon was resident on an F factor-derived plasmid, a cointegrate was formed between a multicopy ColE1-type target plasmid and the conjugative F plasmid. Conjugational transfer of this cointegrate into a polA strain resulted in a stable cointegrate in which replication from the ColE1 plasmid origin was inhibited and replication proceeded only from the single-copy F factor replication origin. We assayed isogenic strains which harbored plasmids encoding chloramphenicol acetyltransferase to measure the copy number of such F factor-ColE1-type cointegrate plasmids and found that the copy number was decreased to the level of single-copy chromosomal elements. This method was used to study the effect of copy number on the expression of the fabA gene (which encodes the key fatty acid-biosynthetic enzyme beta-hydroxydecanoylthioester dehydrase) by the regulatory protein encoded by the fadR gene.     

Replication and segregational stability of Bacillus plasmid pBAA1.

A cryptic plasmid, pBAA1, was identified in an industrial Bacillus strain. The plasmid is 6.8 kilobases in size and is present in cells at a copy number of approximately 5 per chromosome equivalent. The plasmid has been maintained under industrial fermentation conditions without apparent selective pressure and so is assumed to be partition proficient. The minimal replicon was localized to a 1.4-kilobase fragment which also contains the functions required for copy number control. The very low level of segregational instability of the minimal replicon suggests that it also contains functions involved in plasmid maintenance. Comparison with other plasmids indicates that pBAA1 belongs to the group of small gram-positive plasmids which replicate by a rolling cycle-type mechanism. A sequence was identified which is required for the efficient conversion of the single plus strand to the double-stranded form during plasmid replication. Deletion of this sequence resulted in a low level of segregational plasmid instability.     

The coupling of synthesis and partitioning of EBV's plasmid replicon is revealed in live cells

Epstein-Barr virus (EBV) is an exceptionally successful human viral pathogen maintained as a licensed, plasmid replicon in proliferating cells. We have measured the distributions of EBV-derived plasmids in single live cells throughout the cell cycle in the absence of selection and confirmed the measured rates of duplication and partitioning computationally and experimentally. These analyses have uncovered a striking, non-random partitioning for this minimalist plasmid replicon and revealed additional properties of it and its host cells: (1) 84% of the plasmids duplicate during each S phase; (2) all duplicated plasmids are spatially colocalized as pairs, a positioning that is coupled to their non-random partitioning; (3) each clone of cells requires a certain threshold number of plasmids per cell for its optimal growth under selection; (4) defects in plasmid synthesis and partitioning are balanced to yield wide distributions of plasmids in clonal populations of cells for which the plasmids provide a selective advantage. These properties of its plasmid replicon underlie EBV's success as a human pathogen.     

Replication of the mini-R1 plasmid Rsc11 and Rsc11 hybrid plasmids.

Replication of the multicopy mini-R1 plasmid, Rsc11, is dependent on host replication functions dna A, B, C, E and G but independent of polA1. Chloramphenicol immediately stops its replication. A stable relaxation complex is not formed. Composite plasmids were constructed with Rsc11 and other small replicons like pSC101, ColE1 and mini-ColE1. In all combinations the amount of hybrid plasmid DNA in the cell never exceeds the amount of Rsc11 DNA itself. This leads to varying copy numbers of the hybrid plasmids depending on the size of the second plasmid. Replication of the composite plasmids proceeds probably always under the control of the Rsc11 part although the second replicon is still functional. The composite plasmids are incompatible with both the parent replicons.     

Plasmid pGA1 from Corynebacterium glutamicum codes for a gene product that positively influences plasmid copy number.

The complete nucleotide sequence (4,826 bp) of the cryptic plasmid pGA1 from Corynebacterium glutamicum was determined. DNA sequence analysis revealed four putative coding regions (open reading frame A [ORFA], ORFA2, ORFB, and ORFC). ORFC was identified as a rep gene coding for an initiator of plasmid replication (Rep) according to the high level of homology of its deduced amino acid sequence with the Rep proteins of plasmids pSR1 (from C. glutamicum) and pNG2 (from Corynebacterium diphtheriae). This function was confirmed by deletion mapping of the minimal replicon of pGA1 (1.7 kb) which contains only ORFC. Deletion derivatives of pGA1 devoid of ORFA exhibited significant decreases in the copy number in C. glutamicum cells and displayed segregational instability. Introduction of ORFA in trans into the cells harboring these deletion plasmids dramatically increased their copy number and segregational stability. The ORFA gene product thus positively influences plasmid copy number. This is the first report on such activity associated with a nonintegrating bacterial plasmid. The related plasmids pGA1, pSR1, and pNG2 lacking significant homology with any other plasmid seem to be representatives of a new group of plasmids replicating in the rolling-circle mode.     

RepFIC, a basic replicon of IncFI plasmids that has homology with a basic replicon of IncFII plasmids

It was found that a DNA segment containing genes for autonomous replication and its control (basic replicon) present in the IncFI plasmid P307 has homology with RepA, a basic replicon present in IncFII plasmids. The basic replicon in P307 is referred to as RepFIC and the homologous basic replicon in IncFII plasmids is referred to as RepFIIA. In 11 other IncFI plasmids studied a region that has homology with RepFIC and RepFIIA was demonstrated. Thus, of the several basic replicons present in IncFI plasmids, RepFIC is evolutionarily related to a basic replicon of IncFII plasmids.     

Properties and incompatibility behavior of miniplasmids derived from the bireplicon plasmid pCG86

Summary Many plasmids belonging to the F incompatibility groups contain more than one basic replicon. The chimeric plasmid pCG86 is an example of such a multireplicon plasmid. The two basic replicons of pCG86, RepFIIA/FIC and RepFIB have been cloned and re-ligated, the copy numbers of the clones have been determined, and the incompatibility behavior of plasmids containing the ligated replicons and the individual replicons has been studied. The bireplicon plasmids are not expected to be incompatible as recipients with monoreplicon RepFIB or RepFIIA/RepFIC plasmids, since when one replicon is challenged by an incoming replicon, the other should be able to handle the plasmid's replication. In our studies, we found that challenge with either monoreplicon plasmid resulted in incompatibility. This incompatibility was increased in bireplicon plasmids in which RepFIB was duplicated. We conclude that in the bireplicon plasmids, challenging the replication control of one replicon by an incompatible plasmid can interfere with the replication originating from the second replicon.     

Nucleotide sequence and replication characteristics of RepFIB, a basic replicon of IncF plasmids.

A second autonomous replicon of P307, RepFIB, has been isolated that has significant homology with other replicons in IncFI group plasmids. Eleven homologous repeats of 21 base pairs are present on the sequence and flank an open reading frame capable of coding for a protein of about Mr = 40,000. This protein was identified by maxicell analysis of cloned RepFIB. A series of deletion mutations of RepFIB were inserted into a DNA polymerase I-dependent vector and examined for their replication proficiency in a polA1 strain. These experiments defined a minimal replication region of 1.6 kilobases which includes the three repeats immediately upstream and downstream of the open reading frame. Deletion of a second set of repeats further downstream doubled the copy number of a chimeric plasmid replicating under RepFIB control. It was concluded that these repeats control the copy number of the replicon. Incompatibility tests showed that all three sets of repeats could express incompatibility with a resident RepFIB plasmid.     

The generation of concatemeric plasmid DNA in Bacillus subtilis as a consequence of bacteriophage SPP1 infection.

Bacteriophage SPP1 infection of Bacillus subtilis cells bearing plasmids induces the synthesis of multigenome-length plasmid molecules. Two independent pathways can account for this synthesis. In one of those, homology to the phage genome is required, whereas in the other such homology is not a prerequisite. In wild type cells both modes overlap. In dnaB(Ts), at non permissive temperature, or in recE polA strains the main concatemeric plasmid replication mode is the homology-dependent plasmid (hdp) mode. The rate of recombination-dependent concatemeric plasmid DNA synthesis is a consequence of a phage-plasmid interaction which leads to chimeric phage::plasmid DNA. The second mode, which is an homology-independent plasmid (hip) mode seems to be triggered upon the synthesis of a phage encoded product(s) (e.g. inactivation of the exonuclease V enzyme).     

Transfer of yeast telomeres to linear plasmids by recombination

Three distinct segments (the partition-related, or PR segments) within the 370 bp par region of pSC101 have been shown by deletion analysis to be involved in partitioning of the plasmid to daughter cells. The two lateral segments are direct repeats, each of which potentially can pair with an inverted repeat located between them to form a hairpin-loop structure. Deletion of either lateral segment, together with the middle segment, results in plasmid instability (the Par- phenotype). Deletion of one PR segment yields a stable plasmid that nevertheless shows reduced ability to compete with a coexisting wild-type derivative of the same replicon (the Cmp- phenotype). Deletion of all three segments results in a rate of plasmid loss far in excess of that predicted from the observed copy number of the plasmid. Analysis of the segregation properties of these mutants and of temperature-sensitive and high copy number derivatives of the pSC101 replicon suggests a model in which the par function allows the nonreplicating plasmids of the intracellular pool to be counted as individual molecules, and to be distributed evenly to daughter cells. In the absence of par, the multicopy pool of plasmids behaves as a single segregation unit.     

R plasmids which alter ultraviolet light-sensitivity and enhance ultraviolet light-induced mutability in Pseudomonas aeruginosa.

R plasmids pMG1, R2, R931 and pMG15 increased the survival of Pseudomonas aeruginosa exposed to ultraviolet radiation (u.v.) in the wild type, and uvr and polA mutants but did not alter the u.v.-response of a recA mutant. The R plasmid RPL11 reduced u.v.-survival in the wild type, and uvr and polA mutants but did not alter the u.v.-response of a recA host. All the plasmids enhanced the level of spontaneous and u.v.-induced back mutation (Trp+) in a trpB1 strain. The effect of sublethal concentration of sodium arsenite following u.v.-irradiation was examined. It was concluded that in strains trpB1(pMG1) and trpB1(R931), u.v.-protection is determined by a recA+-dependent, arsenite-sensitive repair pathway, whereas in strains trpB1(R2) and trpB1(pMG15), u.v.-protection is determined by a recA+-dependent, arsenite-insensitive step in DNA repair.     

Plasmid localization and cloning of restriction modification genes from Citrobacter freundii 4111 strain]

Over 60 producing strains of restriction endonucleases type II have been found among 500 different strains, mostly Enterobacteriaceae. The strain Citrobacter freundii 4111 produces restriction endonuclease CfrBI, a new isoschisomer of StyI. The genes of the restriction-modification system CfrBI were located on the multicopy plasmid pZE8 containing the Co1E1-type replicon and cloned to E. coli K802. The deletion variant of 3.2-kb pZE8 which contains intact restriction-modification and a DNA fragment responsible for autonomous plasmid replication was selected among the recombinant plasmids. The strain with higher R. CfrBI production (at least 10,000,000 U/g cells, which is 500-fold higher than the wild strain) was constructed.     

Effect of repair deficiency and R plasmids on spontaneous and radiation-induced mutability in Pseudomonas aeruginosa.

The effect of R plasmids on spontaneous and radiation (ultraviolet and gamma)-induced mutability in Pseudomonas aeruginosa was studied in strains containing the radiation-sensitive markers polA3 or rec-2 and the revertable auxotrophic markers hisO27 and trpB1. In the absence of an R plasmid, the radiation-induced mutability was dependent on the recA+ genotype and independent of the polA+ genotype, whereas spontaneous mutability was similar in all genetic backgrounds. R plasmids pPL1, R2, and pMG15 increased the ultraviolet radiation survival and ultraviolet-induced mutability of wild-type and polA host cells but did not alter either effect in a recA mutant. These R plasmids also increased the gamma radiation survival and gamma-induced mutability of wild-type host cells bud pMG15 also enhanced the level of spontaneous mutagenesis in wild-type host cells but not in a polA or recA mutant. These data suggested that a common plasmid gene product(s) may participate in various recA-dependent, error-prone deoxyribonucleic acid repair pathways of P. aeruginosa. The properties of a mutant R plasmid, pPL2, originally selected because it lacked enhanced ultraviolet-induced mutability, supported this conclusion.     

Functional analysis of hybrid plasmids carrying genes for lambda site-specific recombination

A number of hybrid plasmids, carrying lambda genes involved in site-specific integrative recombination, have been constructed in vitro. Analysis of protein synthesis in Escherichia coli minicells has shown that Int protein is synthesized only when int gene is expressed constitutively. The plasmids RSF2124::lambda-CD, RSF2124::lambda-Cint-c57, and pInt lambda were able to integrate into the chromosome of E.coli at the attB. The integration of hybrid plasmids into the genome of bacteria has also been shown for polA1 strains restricting the autonomous replication of ColE1 type plasmids. Genetic markers of hybrid plasmids are maintained in polA1 bacteria for at least 50 generations under nonselective conditions. The Southern blotting experiments using [32P]pBR322 DNA and EcoRI fragments of E. coli polA1 chromosome carrying integrated plasmid pInt lambda demonstrated that in this strain hybrid plasmids can be observed only when integrated into the attB of the chromosome according to Campbell's model of integration. In the cells, where autonomous replication of plasmids is possible, they can be observed both in extrachromosomal and integrated states. The integration of the ColE1 replication origin into the chromosome of bacteria is not lethal for the cells. Only attP and the int gene of lambda are necessary for the integration of hybrid plasmids under conditions of effective int gene expression. If the level of Int protein synthesis is high enough, the prophage excision can be observed in the absence of Xis product. The six-fold decrease of Int protein concentration in the cell (in case of pInt lambda 2 as compared to pInt lambda 1) is critical both for integration and excision.     

Expansion of the IncX plasmid family for improved identification and typing of novel plasmids in drug-resistant Enterobacteriaceae

IncX plasmids are narrow host range plasmids of Enterobactericeae that have been isolated for over 50years. They are known to encode type IV fimbriae enabling their own conjugative transfer, and to provide accessory functions to their host bacteria such as resistance towards antimicrobial agents and biofilm formation. Previous plasmid-based replicon typing procedures have indicated that the prevalence of IncX plasmids is low among members of the Enterobacteriaceae. However, examination of a number of IncX-like plasmid sequences and their occurrence in various organisms suggests that IncX plasmid diversity and prevalence is underappreciated. To address these possible shortcomings, we generated additional plasmid sequences of IncX plasmids of interest and compared them to the genomes of all sequenced IncX-like plasmids. These comparisons revealed that IncX plasmids possess a highly syntenic plasmid backbone, but that they are quite divergent with respect to nucleotide and amino acid similarity. Based on phylogenetic comparisons of the sequenced IncX plasmids, the IncX plasmid group has been expanded to include at least four subtypes, IncX1-IncX4. A revised IncX plasmid replicon typing procedure, based upon these sequences and subtypes, was then developed. Use of this revised typing procedure revealed that IncX plasmid occurrence among bacterial populations is much more common than had previously been acknowledged. Thus, this revised procedure can be used to better discern the occurrence of IncX type plasmids among enterobacterial populations.