Analysis of sequence diversity among IS6110 sequence of Mycobacterium tuberculosis: possible implications for PCR based detection

The IS6110 belongs to the family of insertion sequences (IS) of the IS3 category. This insertion sequence was reported to be specific for Mycobacterium tuberculosis complex and hence is extensively exploited for laboratory detection of the agent of tuberculosis and for epidemiological investigations based on polymerase chain reaction. IS6110 is 1361-bp long and within this sequence different regions have been utilized as targets in the identification of M. tuberculosis by PCR. However, the results are not always consistent, specific and sensitive. In recent years, a few clinical investigations raised concerns over IS6110 specificity and sensitivity in the diagnosis of tuberculosis due to false-positive (homology with other target DNA besides M. tuberculosis) or false negative (due to absence of copies of IS6110) results with IS6110 specific primers. To unravel the variations in IS6110 sequences, an insilico analysis of IS6110 sequence of different strains of M. tuberculosis was carried out. Our results of comparative analysis of IS6110 insertion sequences of M. tuberculosis complex suggests that, IS6110 insertion sequences harbored variations in its sequence, which is evident from the phylogenetic analysis. Importantly, IS6110 sequence has divergence within the copies of same strain and formed different clusters. A list of IS6110 specific primers used in various clinical investigation of tuberculosis was obtained from the literature and their performance scrutinized. Our study emphasizes the need to develop PCR assays (multiplex format) targeting more than one region of the genome of M. tuberculosis.     

Usefulness of ligation-mediated PCR genotyping in tracking outbreak-associated Mycobacterium tuberculosis strains

With the emergence of a multidrug resistant tuberculosis (MDR-TB) outbreak, the availability of a rapid typing method to carry out a nationwide prospective survey for the tracking of newly emerging MDR-TB foci became a priority. For this purpose, we have applied the IS6110 PCR-based genotyping assay, namely, LM-PCR (ligation-mediated PCR). The latter relies on ligation of a synthetic oligonucleotide priming site to a restriction site flanking IS6110. Sequences between the IS element and the restriction site are then amplified using an IS6110 specific outward primer and an oligonucleotide specific to the ligated priming site. Although it was found slightly less discriminative than the standard IS6110 restriction fragment length polymorphism analysis (IS6110 RFLP), LM-PCR allowed for the rapid and prospective identification of new outbreak-related cases within a large pool of circulating M. tuberculosis isolates. In comparison to IS6110 RFLP LM-PCR was found simple enough to justify its implementation in laboratories involved in MDR-TB surveillance at a nationwide scale.     

Mapping of IS6110 flanking regions in clinical isolates of Mycobacterium tuberculosis demonstrates genome plasticity

Southern hybridization was used in combination with IS6110 insertion-locus-specific probes in a comparative study to determine the structure of chromosomal domains flanking IS6110 elements in clinical isolates of Mycobacterium tuberculosis. The resulting restriction fragment length polymorphism (RFLP) data demonstrated three mutational mechanisms responsible for the polymorphisms observed: IS6110 insertion, chromosomal mutation and deletion. The frequency of IS6110 insertion within many of the chromosomal regions demonstrates that preferential integration regions are common in M. tuberculosis. Mapping the IS6110 insertion positions and chromosomal deletions in relation to the M. tuberculosis H37Rv and M. bovis BCG genome sequences reveals numerous disruptions of predicted open reading frames (ORFs). A phylogenetic tree, based on the mutational data, showed a number of independently evolving lineages of M. tuberculosis, while analysis of the mutational events occurring at each branch point suggests both divergent and convergent evolution. A significant positive correlation was demonstrated between the mutation rate and the frequency of occurrence of different isolates in families of strains, suggesting that evolution may impact on strain 'fitness' or that strain proliferation may increase the chance of mutation. We conclude that the genome of clinical isolates of M. tuberculosis continues to evolve.     

Evolutionary relationships among strains of Mycobacterium tuberculosis with few copies of IS6110

Molecular typing of Mycobacterium tuberculosis by using IS6110 shows low discrimination when there are fewer than five copies of the insertion sequence. Using a collection of such isolates from a study of the epidemiology of tuberculosis in London, we have shown a substantial degree of congruence between IS6110 patterns and both spoligotype and PGRS type. This indicates that the IS6110 types mainly represent distinct families of strains rather than arising through the convergent insertion of IS6110 into favored positions. This is supported by identification of the genomic sites of the insertion of IS6110 in these strains. The combined data enable identification of the putative evolutionary relationships of these strains, comprising three lineages broadly associated with patients born in South Asia (India and Pakistan), Africa, and Europe, respectively. These lineages appear to be quite distinct from M. tuberculosis isolates with multiple copies of IS6110.     

Detection of Mycobacterium tuberculosis complex with Real Time PCR: comparison of different primer-probe sets based on the IS6110 element

The sensitivity and specificity to detect Mycobacterium tuberculosis complex of four Real Time PCR primer-probe sets was compared. Three sets targeted nearly the same location on the IS6110 sequence and set 4 targeted a location 200 bp downstream on IS6110. Real Time PCR's with sets 1, 2 and 3 were carried out with co-amplification of a modified target as an internal amplification control. By testing identical DNA samples it was shown that small changes in primer and probe sequences result in differences in the performance of the assays, regarding analytical sensitivity and specificity.     

结核分枝杆菌中插入序列的研究

用人型复合分枝杆菌的特异插入序列IS6110和IS1081制 备探针,对5种限制性内切酶消化的结核分枝杆菌DNA进行杂交。结果表明,经PvuⅡ酶消化 的结核分枝杆菌DNA,用IS6110制备的探针进行杂交呈现高度多态性,说明IS6110对于人型 复合分枝杆菌分型研究和结核病流行病学研究具有很大价值。用IS6110制备的317bp探针对4 6株人结核分枝杆菌分离株多态性分析研究证实,这些菌株呈现高度DNA多态性,而且所含拷 贝数也极为不同,一般含7～18个拷贝。     

Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).     

Molecular evidence for independent occurrence of IS6110 insertions at the same sites of the genome of Mycobacterium tuberculosis in different clinical isolates

Several characteristics of Mycobacterium tuberculosis (e.g., conserved genome and low growth rate) have severely restricted the study of the microorganism. The discovery of IS6110 raised hopes of overcoming these obstacles. However, our knowledge of this IS element is relatively limited; even its two basic characteristics (transposition mechanism and target site selection) are far from well understood. In this study, IS6110 insertions in ipl loci (iplA and iplB) in two collections of clinical isolates of M. tuberculosis from different geographic locations, one from Scotland and the other from Thailand, were investigated. Five different IS6110 insertions in the loci were identified: ipl-4::IS6110, ipl-5::IS6110, ipl-11::IS6110, ipl-12::IS6110, and ipl-13::IS6110. An attempt to establish the phylogenetic relationship of the isolates containing these insertions was unsuccessful, suggesting that some of these insertions may have arisen from more than one event. This possibility is further supported by the observation that IS6110 copies existed in the same site but with different orientations in different isolates, and the insertion site of ipl-1::IS6110 harbored IS6110 copies in both iplA and iplB in different strains. All these suggest the independent occurrence of IS6110 insertions at the same sites of the genome of M. tuberculosis in different clinical isolates. The implications of this finding are discussed.     

Differentiation between Mycobacterium tuberculosis and Mycobacterium bovis by a multiplex-polymerase chain reaction

A multiplex-polymerase chain reaction (PCR) assay, based on one-step amplification and detection of three different mycobacterial genomic fragments, was designed for differentiation between Mycobacterium bovis and Mycobacterium tuberculosis. The oligonucleotide primers were chosen from the gro EL gene, present in the genus Mycobacterium sp., from the IS 6110 insertion sequence, present in Myco. tuberculosis complex and from the mtp 40 gene, identified as a specificspecies Myco. tuberculosis genomic fragment. This amplification method allowed the detection of two fragments of 576 and 317 base pairs in Myco. bovis and three fragments of 576, 396 and 317 base pairs in Myco. tuberculosis strains, including atypical strains of Myco. tuberculosis where the copy number of the IS 6110 element is low. The multiplex-PCR assay described may be a very useful tool for the rapid and specific differentiation of these related mycobacteria and easy to use in medical and veterinary microbiology laboratories.     

Use of the insertion element IS6110 for DNA fingerprinting of Mycobacterium tuberculosis isolates presenting various profiles of drug susceptibility

Abstract IS 6100 is an insertion sequence of the IS3 family and it is present in multiple copies in the chromosome of Mycobacterium tuberculosis . Four to 15 copies are present in various strains of M. tuberculosis . In this study, the value of IS 6110 as an epidemiological marker of tuberculosis was examined. Unrelated clinical strains from Greek patients presented, in restriction fragment length polymorphism analysis, a high degree of polymorphism, whereas patterns of related clinical strains from familial outbreaks were identical. Since RFLP analysis with acetylaminofluorene labeled IS 6110 as the probe gave satisfactory results, it is suggested that this non-radioactive probe can be used in hospitals and health centres for the epidemiological survey of M. tuberculosis infections.     

IS6110 restriction fragment length polymorphism of Mycobacterium tuberculosis isolated from patients with pulmonary tuberculosis in Campinas,Brazil: evidence of intercontinental distribution of strains

Tuberculosis (TB) is a major concern in developing countries. In Brazil, few genotyping studies have been conducted to verify the number of IS6110 copies present in local prevalent strains of Mycobacterium tuberculosis, the distribution and clustering of strains. IS6110 DNA fingerprinting was performed on a sample of M. tuberculosis isolates from patients with AFB smear-positive pulmonary TB, at a hospital in Brazil. The IS6110 profiles were analyzed and compared to a M. tuberculosis database of the Houston Tuberculosis Initiative, Houston, US. Seventy-six fingerprints were obtained from 98 patients. All M. tuberculosis strains had an IS6110 copy number between 5-21 allowing for differentiation of the isolates. Human immunodeficiency virus infection was confirmed in nearly half the patients of whom data was available. Fifty-eight strains had unique patterns, while 17 strains were grouped in 7 clusters (2 to 6 strains). When compared to the HTI database, 6 strains matched isolates from El Paso, Ciudad de Juarez, Houston, and New York. Recently acquired infections were documented in 19% of cases. The community transmission of infection is intense, since some clustered strains were recovered during the four-year study period. The intercontinental dissemination of M. tuberculosis strains is suspected by demonstration of identical fingerprints in a distant country.     

IS6110-mediated deletion polymorphism in the direct repeat region of clinical isolates of Mycobacterium tuberculosis

This study investigates the phenomenon of IS6110-mediated deletion polymorphism in the direct repeat (DR) region of the genome of Mycobacterium tuberculosis. Clinical isolates and their putative predecessors were compared using a combination of DR region restriction fragment length polymorphism, IS6110 DNA fingerprinting, spoligotyping, and DNA sequencing, which allowed the mapping of chromosome structure and deletion junctions. The data suggest that adjacently situated IS6110 elements mediate genome deletion. However, in contrast to previous reports, deletions appear to be mediated by inversely oriented IS6110 elements. This suggests that these events may occur via mechanisms other than RecA-mediated homologous recombination. The results underscore the important role of IS6110-associated deletion hypervariability in driving M. tuberculosis genome evolution.     

A two-step strategy for molecular typing of multidrug-resistant Mycobacterium tuberculosis clinical isolates from Poland

Tuberculosis (TB) continues to be one of the most challenging public health problems in the world. An important contributor to the global burden of the disease is the emergence and spread of drug-resistant and particularly multidrug-resistant Mycobacterium tuberculosis strains (MDR), defined as being resistant to at least isoniazid and rifampicin. In recent years, the introduction of different DNA-based molecular typing methods has substantially improved the knowledge of the epidemiology of TB. The purpose of this study was to employ a combination of two PCR-based genotyping methods, namely spoligotyping and IS6110-Mtb1/Mtb2 PCR to investigate the clonal relatedness of MDR M. tuberculosis clinical isolates recovered from pulmonary TB patients from Poland. Among the 50 isolates examined, 28 (56%) were clustered by spoligotyping, whereas IS6110-Mtb1/Mtb2 PCR resulted in 16 (32%) clustered isolates. The isolates that clustered in both typing methods were assumed to be clonally related. A two-step strategy consisting of spoligotyping as a first-line test, performed on the entire pool of isolates, and IS6110-Mtb1/Mtb2 PCR typing as a confirmatory subtyping method, performed only within spoligotype-defined clusters, is an efficient approach for determining clonal relatedness among M. tuberculosis clinical isolates.     

Polymorphic repetitive DNA sequences in Mycobacterium tuberculosis detected with a gene probe from a Mycobacterium fortuitum plasmid

Clinical isolates of Mycobacterium tuberculosis were shown by Southern blotting to contain DNA sequences hybridizing to a probe derived from a Mycobacterium fortuitum plasmid. Two such M. tuberculosis DNA fragments, isolated from a gene library, were used as probes to show restriction fragment length polymorphism in M. tuberculosis strains by detecting a repetitive sequence apparently located at different points on the chromosome. This could indicate the presence of a transposable element in M. tuberculosis which is partly homologous to a region of the M. fortuitum plasmid. The probes described can be used to fingerprint M. tuberculosis isolates, and in addition are capable of distinguishing M. tuberculosis from Mycobacterium bovis and BCG.     

Use of tagged random hexamer amplification (TRHA) to clone and sequence minute quantities of DNA--application to a 180 kb plasmid isolated from Sphingomonas F199.

We have developed a novel method to clone and sequence minute quantities of DNA. The method was applied to sequence a 180 kb plasmid pNL1. The first step was the production of a size distributed population of DNA molecules that were derived from the 180 kb plasmid pNL1. The first step was accomplished by a random synthesis reaction using Klenow fragment and random hexamers tagged with a T7 primer at the primer 5'-end (T7-dN6, 5'-GTAATACGACTCACTATAGGGCNNNNNN-3'. In the second step, Klenow-synthesized molecules were amplified by PCR using T7 primer (5'-GTAATACGACTCACTATAGGGC-3'). With a hundred nanograms starting plasmid DNA from pNL1, we were able to generate Klenow-synthesized molecules with sizes ranging from 28 bp to >23 kb which were detectable on an agarose gel. The Klenow-synthesized molecules were then used as templates for standard PCR with T7 primer. PCR products of sizes ranging from 0.3 to 1.3 kb were obtained for cloning and sequencing. From the same Klenow-synthesized molecules, we were also able to generate PCR products with sizes up to 23 kb by long range PCR. A total 232.5 kb sequences were obtained from 593 plasmid clones and over twenty putative genes were identified. Sequences from these 593 clones were assembled into 62 contigs and 99 individual sequence fragments with a total unique sequence of 86.3 kb.     

The use of molecular biological methods for the individual characterization of Mycobacterium tuberculosis strains

The expediency of using molecular biological methods for the evaluation of M. tuberculosis clinical strains by individual genetic certification of circulating M. tuberculosis strains has been substantiated. Considerable genetic heterogeneity of M. tuberculosis strains isolated from patients in different regions of the Russian Federation has been established; this heterogeneity is due to the presence of differences in the number of copies (5-26) of element IS6110 in M. tuberculosis cells.     

Locating transposable element polymorphisms in bacterial genomes

Although whole-genome sequencing is greatly extending our knowledge of the genetic capacity of those bacterial species, it is only directly informative for the particular strain sequenced. Many bacterial species exhibit more or less genetic polymorphism within their populations and characterising this variety is an extremely important way of elucidating the biology of these species. Often genomic polymorphisms are associated with multicopy elements, particularly transposable elements. We describe a novel method that efficiently characterises the sequences of such polymorphisms. We have optimised heminested inverse PCR (hINVPCR) to assess the diversity of insertional polymorphisms of a transposable element (IS6110) in clinical isolates of Mycobacterium tuberculosis. To increase the yield of information, genomic DNA was digested with different endonucleases (Bsp1286I, HaeII or PvuI), and primers based on both the 5' and 3' ends of IS6110 were used to amplify and determine the genomic sequence upstream (or downstream) of the transposable element. We found that both the choice of restriction enzyme and the use of primers at both ends of the transposable element significantly increased the diversity of the insertion sites identified. Band stabbing was incorporated into the method as an alternative to cloning in order to screen large number of isolates at a sequence level in a rapid and labour-efficient fashion. We describe some of the purposes to which such data can be put.     

Host-mediated modification of PvuII restriction in Mycobacterium tuberculosis.

Restriction endonuclease PvuII plays a central role in restriction fragment length polymorphism analysis of Mycobacterium tuberculosis complex isolates with IS6110 as a genetic marker. We have investigated the basis for an apparent dichotomy in PvuII restriction fragment pattersn observed among strains of the M. tuberculosis complex. The chromosomal regions of two modified PvuII restriction sites, located upstream of the katG gene and downstream of an IS1081 insertion sequence, were studied in more detail. An identical 10-bp DNA sequence (CAGCTGGAGC) containing a PvuII site was found in both regions, and site-directed mutagenesis analysis revealed that this sequence was a target for modification. Strain-specific modification of PvuII sites was identified in DNA from over 80% of the nearly 800 isolates examined. Furthermore, the proportion of modifying and nonmodifying strains differs significantly from country to country.