Immobilization ofSaccharomyces diastaticus on wood chips for ethanol production

Saccharomyces diastaticus cells were immobilized onto beech wood chips of different particle size and three pH values. pH values in the range 5.0–6.0, and 1.84–1.92 mm particle size had a positive effect on the immobilization process. The chosen carrier—1.84 mm-sized wood chips adsorbed 150 mg dry cell mass per g dry carrier mass. The Gibbs free energy and the activation energy for the first (monolayer) and second (multilayer) immobilization stages was 4581, 19090 and 8590 J g mol⁻¹, respectively. The kinetics of immobilized cell systems in ethanol production have been studied in a packed bed-reactor. Ethanol production and the respiration quotient (RQ) were at a maximum at a dilution rate of 0.16/h. The reactor was operated under steady-state conditions for 30 d at the dilution rate 0.16/h.     

Accuracy of evaluation of ovarian structures by transrectal ultrasonography in ewes

The objective of this study was to assess the accuracy of estimating the size and number of corpora lutea (CL) and ovarian follicles by ultrasonography (US) of the ewe in standing position. US observations were compared with those made at subsequent postmortem examination of the ovaries. Corriedale ewes (n=50) of unknown reproductive history and at random stages of the oestrus cycle were used for the study. Transrectal US was performed using a 7.5 MHz transducer with the ewe in standing position. The ewes were slaughtered 12 h after the US examination and the ovaries collected, dissected and the number and size of the CL and follicles evaluated. CL were classified as functional or non-functional on the basis of their colour and follicles were classified by size (2, 3, 4 and > or =5 mm). Accuracy of US was assessed by calculating its positive predictive value and sensitivity. The data were evaluated by Pearson correlation and linear regression analysis. The predictive value and sensitivity of US was 100% for the presence and 96% for the absence of CL. In four out of five ewes with double ovulations, the presence of both CL was correctly diagnosed by US. For functional CL, the sensitivity of US was 100%. The regression coefficient for CL diameter was significant (P< or =0.001; r2=0.4; n=35). The size of 85 of 117 follicles was accurately determined. The correlation between numbers of follicles counted by US and postmortem increased with size of follicle from r=0.44 (P< or =0.01) for 2 mm to r=0.85 (P< or =0.001) for >or =5 mm diameter follicles. The regression between the diameter of follicles determined by the two methods was significant (P< or =0.001; r2=0.8; n=117). The predictive value of US for the number of follicles was high (98-100%) for all follicle sizes except for 3 mm diameter follicles (predictive value 71%). Similarly, the sensitivity was high for all sizes of follicles (90-95%) except for those of 2 mm diameter (62%). It was concluded that ultrasound scanning provides a highly accurate method for determining the number of CL and follicles > or =4 mm diameter but that its predictive value and sensitivity are lower for smaller diameter follicles. The regression equation for diameter measured by US on that evaluated postmortem explained more of the variation for follicles than for CL.     

Assessment of the influence of media particle size on the biofiltration of odorous exhaust ventilation air from a piggery facility

Two pilot scale biofiltration systems were constructed and installed at the University College Dublin Research Farm, Lyons Estate. Experimental units consisting of two pens in a 12 pen pig house were sealed off from other pens. Air from each pen was extracted and treated separately in two biofiltration systems. Wood chips larger than 20 mm were selected as the medium for biofiltration system 1, whereas chips of between 10 and 16 mm were used in biofiltration system 2. The moisture content of the media was maintained at 69+/-4% (w.w.b.) using a load cell method. The volumetric loading rates ranged from 769 to 1847 m3 [gas] m(-1) [medium] h(-1) over a 63-day experimental period. Both biofilters reduced odour between 88% and 95%. Ammonia removal efficiencies ranged from 64% to 92% and 69% to 93%, for biofiltration systems 1 and 2, respectively. Sulphur-containing compounds were reduced between 9-66%, and -147-51% across biofiltration systems 1 and 2. The pH of the biofilters' leachate remained between 6 and 8. Pressure drop for biofilter 2 was 16 Pa greater than that of biofilter I at the maximum volumetric loading rate of 1847 m3 [gas] m(-3) [medium] h(-1). It is recommended that a wood chip media particle size greater than 20 mm be used for large scale operation of a biofiltration system on intensive pig production facilities to reduce the development of anaerobic zones and to minimize pressure drop on the system fans.     

Evaluation of a combined brown rot decay–chemical delignification process as a pretreatment for bioethanol production from Pinus radiata wood chips

Wood chips of Pinus radiata softwood were biotreated with the brown rot fungus (BRF) Gloeophyllum trabeum for periods from 4 and 12 weeks. Biodegradation by BRF leads to an increase in cellulose depolymerization with increasing incubation time. As a result, the intrinsic viscosity of holocellulose decreased from 1,487 cm³/g in control samples to 783 and 600 cm³/g in 4- and 12-week decayed wood chips, respectively. Wood weight and glucan losses varied from 6 to 14% and 9 to 21%, respectively. Undecayed and 4-week decayed wood chips were delignified by alkaline (NaOH solution) or organosolv (ethanol/water) processes to produced cellulosic pulps. For both process, pulp yield was 5–10% lower for decayed samples than for control pulps. However, organosolv bio-pulps presented low residual lignin amount and high glucan retention. Chemical pulps and milled wood from undecayed and 4-week decayed wood chips were pre-saccharified with cellulases for 24 h at 50°C followed by simultaneous saccharification and fermentation (SSF) with the yeast Saccharomyces cerevisiae IR2-9a at 40°C for 96 h for bioethanol production. Considering glucan losses during wood decay and conversion yields from chemical pulping and SSF processes, no gains in ethanol production were obtained from the combination of BRF with alkaline delignification; however, the combination of BRF and organosolv processes resulted in a calculated production of 210 mL ethanol/kg wood or 72% of the maximum theoretically possible from that pretreatment, which was the best result obtained in the present study.     

Volumetric dynamic computed tomography angiography in the topical diagnosis of sporadic insulinomas

The authors analyzed the data of contrast-enhanced multislice spiral computed tomography (MSCT) angiography versus those of volumetric dynamic computed tomography, percutaneous and endoscopic ultrasonography, selective angiography, and arterial stimulation blood sampling in the diagnosis of sporadic insulinomas depending on the size and site of the tumor. Forty-five patients (25 women and 20 men) aged 20 to 55 years (mean age, 43.4 +/- 2.8 years) with characteristic clinical symptoms and Whipple's triad, were examined. These were found to have 45 sporadic insulinomas that were located in the head and isthmus (n = 13 (28.9%)), body (n = 19 (42.2%)), and tail (n = 13 (28.9%)). The insulinomas measured 4.0 to 10.0 mm (mean size, 6.5 +/- 2.1 mm) (n = 9), 11.0 to 20.0 mm (mean size, 13.2 +/- 2.5 mm) (n = 23), and 21.0 to 25.0 mm (mean size, 22.6 +/- 2.8 mm) (n = 13). Volumetric dynamic CT angiography increases detection rates for tumors less than 1.0 cm in size to 77.8%. It enabled insulinomas to be localized in 82.2% of cases.     

A pilot study on lignocelluloses to ethanol and fish feed using NMMO pretreatment and cultivation with zygomycetes in an air-lift reactor

A complete process for the production of bioethanol and fungal biomass from spruce and birch was investigated. The process included milling, pretreatment with N-methylmorpholine-N-oxide (NMMO), washing of the pretreated wood, enzymatic hydrolysis, and cultivation of the zygomycetes fungi Mucor indicus. Investigated factors included wood chip size (0.5-16 mm), pretreatment time (1-5 h), and scale of the process from bench-scale to 2 m high air-lift reactor. Best hydrolysis yields were achieved from wood chips below 2 mm after 5 h of pretreatment. Ethanol yields (mg/g wood) of 195 and 128 for spruce, and 175 and 136 for birch were achieved from bench-scale and airlift, respectively. Fungal biomass yields (mg/g wood) of 103 and 70 for spruce, and 86 and 66 for birch from bench scale and airlift respectively were simultaneously achieved. NMMO pretreatment and cultivation with M. indicus appear to be a good alternative for ethanol production from birch and spruce.     

生物炭对土壤水分蒸发的影响

为确定干旱区生物炭的合理施用量及其对土壤水文过程的影响,采用室内土柱试验,研究了3种生物炭添加量(5%、10%和15%)和4种生物炭类型(d<0.25 mm竹炭、0.25 mm<d<1 mm竹炭、d<0.25 mm木炭和0.25 mm <d<1 mm木炭;d为粒径)对地下水补给、土壤持水能力、土壤水分上升运动和蒸发的影响.结果表明: 生物炭对地下水补给、土壤持水能力、土壤水分上升运动和蒸发都有明显影响,但生物炭原料和粒径不同,其影响效果不同;随生物炭施加量的升高,地下水对土壤补给量增大;添加生物炭可提高土壤持水能力,促进土壤水含量的上升速度,其中,添加竹炭效果大于木炭,小粒径生物炭大于大粒径生物炭;生物炭添加量较低(5%)时能有效抑制土壤蒸发,但添加量过高则可能促进土壤蒸发.干旱地区土壤适当施用生物炭可提高土壤保墒能力.     

Particle size distribution of distillers dried grains with solubles (DDGS) and relationships to compositional and color properties

Eleven distillers dried grains with solubles (DDGS), processed from yellow corn, were collected from different ethanol processing plants in the US Midwest area. Particle size distribution (PSD) by mass of each sample was determined using a series of six selected US standard sieves: Nos. 8, 12, 18, 35, 60, and 100, and a pan. The original sample and sieve sized fractions were measured for surface color and contents of moisture, protein, oil, ash, and starch. Total carbohydrate (CHO) and total non-starch CHO were also calculated. Results show that there was a great variation in composition and color among DDGS from different plants. Surprisingly, a few DDGS samples contained unusually high amounts of residual starch (11.1-17.6%, dry matter basis, vs. about 5% of the rest), presumably resulting from modified processing methods. Particle size of DDGS varied greatly within a sample and PSD varied greatly among samples. The 11 samples had a mean value of 0.660mm for the geometric mean diameter (d(gw)) of particles and a mean value of 0.440mm for the geometric standard deviation (S(gw)) of particle diameters by mass. The majority had a unimodal PSD, with a mode in the size class between 0.5 and 1.0mm. Although PSD and color parameters had little correlation with composition of whole DDGS samples, distribution of nutrients as well as color attributes correlated well with PSD. In sieved fractions, protein content, L and a color values negatively while contents of oil and total CHO positively correlated with particle size. It is highly feasible to fractionate DDGS for compositional enrichment based on particle size, while the extent of PSD can serve as an index for potential of DDGS fractionation. The above information should be a vital addition to quality and baseline data of DDGS.     

Fractionation of Forest Residues of Douglas-fir for Fermentable Sugar Production by SPORL Pretreatment

Douglas-fir (Pseudotsuga menziesii) forest residues were physically fractionated through sieving. The bark and wood were separated for large-sized fractions (>12.7?mm), and their contents were determined. The chemical compositions of the large fractions were calculated based on the contents and chemical compositions of the bark and wood. The chemical compositions of the fine fractions were analyzed. The bark and wood content in the fine fractions was calculated based on the measured glucan and lignin contents in each fraction. It was found that fractionation by particle/chip size can effectively fractionate bark and wood and therefore lignin from carbohydrates. The large-sized fractions (>12.7?mm) represent approximately 60?% of the collected forest residues but only contain approximately 37?% of the total bark and 35?% of the total ash, or a selectivity over bark and ash of 1.6 and 1.7, respectively. Pretreatment of forest residues by sulfite pretreatment to overcome recalcitrance of lignocelluloses and subsequent enzymatic hydrolysis revealed the presence of 14.3?% bark can reduce substrate enzymatic digestibilities (SED) 16?% compared with that from a bark-free sample. The SED of a bark is 41?% compared with 73?% for wood when pretreated under the same conditions. Separating pretreatment of bark from wood is beneficial for producing a more enzymatically digestible substrate. The results from the present study could have significant implications for harvesting forest residues.     

Survival of Wood Duck Ducklings and Broods in Mississippi and Alabama

ABSTRACT Although North American wood ducks (Aix sponsa) are well-studied throughout their range, researchers know little about demographic and environmental factors influencing survival of ducklings and broods, which is necessary information for population management. We studied radiomarked female and duckling wood ducks that used nest boxes and palustrine wetlands at Noxubee National Wildlife Refuge (NNWR) in Mississippi, USA, in 1996–1999, and riverine wetlands of the Tennessee-Tombigbee Rivers and Waterway (TTRW) system in Alabama in 1998–1999. We estimated survival of ducklings and broods and evaluated potentially important predictors of duckling survival, including age and body mass of brood-rearing females, hatch date of ducklings, duckling mass, brood size at nest departure, inter-day travel distance by ducklings, site and habitat use, and daily minimum air temperature and precipitation. At NNWR, survival of 300 radiomarked ducklings ranged from 0.15 (95% CI = 0.04-0.27) to 0.24 (95% CI = 0.13-0.38) and was 0.21 (95% CI = 0.15-0.28) for 1996–1999. Our overall estimate of brood survival was 0.64 (n = 91; 95% CI = 0.54-0.73). At TTRW, survival of 129 radiomarked ducklings was 0.29 in 1998 (95% CI = 0.20-0.41) and 1999 (95% CI = 0.13-0.45) and was 0.29 (95% CI = 0.20-0.40) for 1998–1999. Our overall estimate of brood survival was 0.71 (n = 38; 95% CI = 0.56-0.85). At NNWR, models that included all predictor variables best explained variation in duckling survival. Akaike weight (w_i) for the best model was 0.81, suggesting it was superior to other models (<0.01 < w_i < 0.18). We detected 4 competing models for duckling survival at TTRW. Inter-day distance traveled by ducklings was important as this variable appeared in all 4 models; duckling survival was positively related to this variable. Patterns of habitat-related survival were similar at both study areas. Ducklings in broods that used scrub-shrub habitats disjunct from wetlands containing aggregations of nest boxes had greater survival probabilities than birds remaining in wetlands with such nest structures. Managers may increase local wood duck recruitment by promoting availability of suitable brood habitats (e.g., scrub-shrub wetlands) without aggregations of nest boxes that may attract predators and by dispersing nest boxes amid or adjacent to these habitats. We did not determine an optimal density of nest boxes relative to local or regional population goals, which remains important research and conservation needs.     

Influence of hay particle size at different concentrate and feeding levels on digestive processes and feed intake in ruminants. 2. passage,digestibility and feed intake

In order to study the main effects of particle size, three ruminally fistulated cows (550 to 580 kg BW) were fed a constant low concentrate level (3.56 kg DM/d, 20% of total DMI) and a fibre‐rich hay (approximately 60% NDF in DM) in long (28.7 mm), chopped (9.2 mm) and fine ground (2.9 mm) form in a 3 x 3 Latin square design. In another three factorial experiment with 8 wethers (4 animals were ruminally fistulated, mean BW = 68 kg) the main effects and interactions of the above mentioned hay particle sizes at two concentrate levels (10.4 to 13.3% and 29.5 to 40.1% of DMI, resp.) and two intake levels (restricted and ad libitum) were investigated. In comparison to long hay (28.7 mm), feeding of chopped hay (9.2 mm) at low concentrate levels, increased not only the hay intake (7% in dairy cows and 13% in sheep) but also the intake of digestible organic matter (12% in dairy cows and 32% in sheep), due to an increase in the apparent digestibility of OM by 3.8% in dairy cows and 8.2% in sheep. Ad libitum feeding of fine ground hay in combination with low concentrate amount in the ration increased the passage rate in the hindgut and consequently the hay intake, but not the intake of DOM, due to a significant depression of digestibility, especially of fibre fractions (4 to 7% in dairy cows and 4.5 to 14% in sheep), in comparison to 28.7 and 9.2 mm hay particle sizes. The digestibility decreased significantly with restricted feeding of fine ground hay in sheep only in comparison to 9.2 mm particle size. A threefold increase of concentrate amount levelled out all effects of the particle size reduction. The effect of particle size was more pronounced in sheep than in dairy cows.     

Development of Bursaphelenchus xylophilus Populations in Wood Chips with Different Moisture Contents

Bags of Pinus strobus wood chips with moisture contents of 38, 92, 164, and 217% (oven dry weight) were inoculated with Bursaphelenchus xylophilus and incubated at 30 C in order to determine the effect of wood moisture on nematode population development. Nematodes were extracted after 2, 4, 8, and 12 weeks. Population levels were greatest in wood chips with a moisture content of 38% and decreased successively with each higher moisture content. In chips with the three lower moisture contents, populations peaked at 2 weeks, but at 217% moisture, they peaked at 8 weeks. By 12 weeks, nematode populations had declined in wood chips with 92 and 164% moisture contents. The fungi most frequently isolated from the wood chips were Alternaria, Fusarium, Gliocladium, Graphium, Penicillium, Trichoderma, and Mucorales.     

A comparative study of seven grabs used for sampling benthic macroinvertebrates in rivers

SUMMARY. After considering the large number of grabs described in the literature, seven grabs of weight < 25 kg were chosen for manual operation from a small boat: Van-Veen grab, weighted and unweighted Ponar grabs, Friedinger version of the Petersen grab, Dietz-La Fond mud-snapper, pole-operated Birge-Ekman grab and pole-operated Allan grab. Random samples (number of sampling units n= 10) were taken in a large tank with a known number of 2-mm cylindrical plastic pellets amongst stones of uniform size. Separate experiments were performed with four sizes of stones (model ranges: 2–4 mm, 8–16 mm, 16–32 mm, 32–64 mm). Stratified random samples (n= 10) were taken in rivers and the modal particle sizes at four sites were 0.004–0.06 mm, 0.5–2 mm, 16–64 mm and 64–128 mm. All grabs usually took a representative sample of the substratum at each site with no strong bias towards a particular particle size. The general performance of the Friedinger, Dietz-La Fond and Allan grabs was poor, except on a muddy bottom, with frequent failure to operate, small samples of substratum and a mean depth of penetration < 3 cm in all substrata except mud for the Dietz-La Fond and Allan grabs. The Van-Veen and Birge-Ekman grabs sampled to a mean depth < 3 cm in mud and fine gravel (2–4 mm), but the Birge-Ekman jammed frequently in fine gravel. Both Ponar grabs operated well and sampled to a mean depth ≥ 5 cm in mud and fine gravel, > 3 cm when small stones (8–16 mm) were present and 2 cm (weighted Ponar only) when larger stones (> 16 mm) were present in a gravel bottom. The mean depth was <0.8 cm for all grabs when larger stones (>16 mm) were predominant on the bottom. In the tank experiments with pellets, the efficiencies for the total catches of the Friedinger, Dietz-La Fond and Allan grabs were low with values <45% for fine gravel (2–4 mm), < 22% for small stones (8–16 mm) and <5% for a substratum of larger stones (>16 mm). If 50% is the minimum acceptable efficiency, then the Ponar, Van-Veen and Birge-Ekman grabs were adequate for fine gravel, only the two Ponar grabs were adequate for small stones and no grabs were adequate for sampling a substratum of larger stones (>16 mm). In field trials, the relative abundances of major taxa were similar for most grabs at each site; Friedinger and Dietz-La Fond grabs were the major exceptions. In terms of both mean number of taxa and mean number of invertebrates m^?2 the Ponar, Birge-Ekman and Allan grabs performed well on the predominantly muddy substratum at site 1, but only the weighted Ponar grab performed adequately on the predominantly gravel bottom with some large stones (>16 mm) at site 2. All grabs performed badly when larger stones (>16 mm) were predominant on the bottom (sites 3, 4). The relationship between the variances and means of the samples taken with each grab followed a power law for the catches of pellets in tank experiments, and for major taxa and total numbers at each site in field trials. Values of exponents in the power law lay within the range 1.14–2.34. The coefficient of variation was also frequently related to the sample mean and was an unreliable statistic for comparing the precision of grabs.     

Ultrasonographic characterization of the ovaries and the uterus in prepubertal and pubertal gilts

In two experiments (EXP), 44 and 52 crossbred gilts (mean age+/-S.D. and weight+/-S.D.: 204+/-22 and 203+/-9 days, 114+/-13 and 127+/-12 kg, respectively, in EXP 1 and 2) from four farms were examined by means of transcutaneous ultrasonography (US) to define the characteristics of the ovaries and the uterus (echotexture, size) and to investigate the appropriateness of US to determine sexual maturity. Gilts were judged as prepubertal [PRE; follicles 2-5 mm (F2-5) only] or pubertal [PUB; F7-8, corpora lutea (CL), corpora haemorrhagica (CH)] at the first (PUB-1; EXP 1) or a subsequent estrous cycle [PUB-2; additionally corpora albicantia (CA); EXP 1] by US, and results were verified by postmortem examination (EXP 1), or progesterone analysis and detection of estrous signs (EXP 2). Accuracy of US was 100% for PRE and PUB (both EXP) and 77.3% for PUB-1 and PUB-2 (EXP 1). PRE and PUB with CL/CH had uteri of homogeneous, PUB with F7-8 of heterogeneous echotexture. The size was expressed as the mean sectional area (SAsono) of 2-5 cross-sections of the uterine horns (calculated by multiplication of 1/2 the maximum x the minimum dimension of the cross-sections x pi). SAsono corresponded with the sectional area of postmortem dissected transverse uterine segments relatively with r=0.92 (P<0.0001; EXP 1). Mean SAsono (both EXP) and mean uterine weight (EXP 1) were PRE相似文献   

Air method measurements of apple vessel length distributions with improved apparatus and theory

Studies showing that rootstock dwarfing potential is related to plant hydraulic conductance led to the hypothesis that xylem properties are also related. Vessel length distribution and other properties of apple wood from a series of varieties were measured using the 'air method' in order to test this hypothesis. Apparatus was built to measure and monitor conductivity to air of fresh wood segments of different lengths. Theory for determining vessel length distribution was improved to give a single parameter uni-modal vessel length probability density function. The function, derived by combining the exponential extinction (with extinction coefficient k) of wood conductivity to air (C) as wood length (x) increases (i.e. C=Co exp (-kx)) with the differential double difference formula, is Px=xxk2 exp (-kx), where Px is the fraction of vessels of length x. The main parameter of the distribution, k, was found to be the inverse of the mode of the distribution, i.e. the most common vessel length, Lo. Lo for ten apple rootstock and scion varieties varied from 5.6+/-0.1 cm (+/-SE) for MM.111 to 9.0+/-1.0 for Prunifolia (P <0.05). Average maximum vessel length was approximately 50 cm, and differences were not significant. Effective vessel radii ranged from 14 for Prunifolia to 24.3+/-0.7 micro m for M.26, with standard errors less than 12% of the mean. Specific conductivity of a 15 cm wood segment ranged from 2x109-4) to 1.6+/-0.2x10(-2) dm3 s(-1) kPa(-1) m(-1) for maruba and M.26, respectively, with standard errors up to 63% of the mean. Vessel density at the air entry point ranged from 18+/-3 to 42+/-6 vessels mm-2 for M.26 and MM.106, respectively, with standard errors as high as 89% of the mean. It was concluded that there is no general relationship between the wood properties investigated and rootstock size class, and that plasticity increases from vessel lengths to radii to specific conductivity and vessel densities.     

Effect of experimental bedding treatments on the density of immature Musca domestica and Stomoxys calcitrans (Diptera: Muscidae) in outdoor calf hutches

Experimental bedding materials and a novel delivery method of cyromazine (Larvadex) were evaluated as replicated treatments in outdoor calf hutches for effect on the density of immature Musca domestica L. and Stomoxys calcitrans (L.). In 6-wk trials, overall density of Musca domestica L. and Stomoxys calcitrans (L.) in straw bedding averaged 36.2 and 52.6 maggots/liter, respectively, compared with respective average densities of 9.0 and 16.2 for wood chips and 10.4 and 20.0 for wood chips over a hydraulic fabric filter system. These values represent average reductions of 80 and 69% and 77 and 68%, respectively. Densities of M. domestica and S. calcitrans in ground corncob over the filter system averaged 13.3 and 4.1 maggots/liter in 3.2-mm size corncob particles, and 1.7 and 1.2 for 6.4-mm size corncob particles (average reductions of 62 and 87% and 90 and 96%, respectively) relative to straw bedding. Densities of these two species in sand bedding averaged 2.8 and 0.4 maggots/liter (average reductions of 93 and 99%), but sand became compacted and soiled with calf urine and feces after several weeks. Cyromazine excreted in calf urine limited density of both species in straw to an average of 11.0 and 15.6 maggots/liter, respectively (a 58 and 79% suppression relative to untreated straw). These data confirm that straw bedding promotes muscoid maggot growth and illustrate that alternative calf hutch bedding systems and urine delivery of cyromazine may improve muscoid fly management on dairy farms by limiting the development of muscoid maggots.     

Effect of initial physical characteristics on sludge compost performance

To develop an active microbial activity quickly developing stabilizing thermophilic temperatures during the composting of wastewater sludge, the bulking agent (BA) plays a major role in establishing the recipe structure, exposed particle surface area and porosity. To optimize the biodegradation of a sludge compost recipe, the objective of this paper was to study the effect and interaction of initial moisture content (MC) and BA particle size distribution. Three 300 L insulated laboratory composters were used to treat two series of ten (10) recipes with different combinations of MC and BA particle size distribution. Using a to wastewater sludge to BA dry mass ratio of 1/6, the ten (10) recipes were repeated using two BA, residues recycled from a commercial sludge composting plant and crushed wood pallets. Each four week trial monitored O₂ uptake, temperature, compost consolidation and airflow distribution. The Central Composite Factor Design method produced a model from the results estimating the impact of a wider range of MC and BA particles size distribution. The MC directly affected the total O₂ uptake and therefore, organic matter biodegradation. The BA particle size distribution influenced compost consolidation with a MC crossed effect. Both BA particle size distribution and MC influenced compost airflow dispersion. Composting was optimized using the BA consisting of recycled green waste residues with particle size of 20–30 mm and a 55% MC. The predictive models suggested the need for further optimization of sludge and wood residue composting recipe.     

Abatement cost of wood‐based energy products at the production level on afforested and reforested lands

We combined economic and life‐cycle analyses in an integrated framework to ascertain greenhouse gas (GHG) intensities, production costs, and abatement costs of GHG emissions for ethanol and electricity derived from three woody feedstocks (logging residues only, pulpwood only, and pulpwood and logging residues combined) across two forest management choices (intensive and nonintensive) and 31 harvest ages (year 10–year 40 in steps of 1 year) on reforested and afforested lands at the production level for slash pine (Pinus elliottii) in the Southern United States. We assumed that wood chips and wood pellets will be used to produce ethanol and generate electricity, respectively. Production costs and GHG intensities of ethanol and electricity were lowest for logging residues at the optimal rotation age for both forest management choices. Opportunity cost related with the change in rotation age was a significant determinant of the variability in the overall production cost. GHG intensity of feedstocks obtained from afforested land was lower than reforested land. Relative savings in GHG emissions were higher for ethanol than electricity. Abatement cost of GHG emissions for ethanol was lower than electricity, especially when feedstocks were obtained from a plantation whose rotation age was close to the optimal rotation age. A carbon tax of at least $25 and $38 Mg^?1 CO₂e will be needed to promote production of ethanol from wood chips and electricity from wood pellets in the US, respectively.     

Effect of C/N ratio and moisture content on the composting of poplar wood

Summary Milled poplar wood (1.7 mm mesh size) was composted in lab-scale reactors. Initial C/N ratios were adjusted to 10:1, 30:1, and 50:1 using urea as the nitrogen source. At each C/N ratio, three moisture levels (30, 50, and 70%) were tested. C/N ratios of 50:1 or 30:1 and moisture content of 70% favored more effective composting as indicated by higher levels of mineralization of the poplar wood to CO₂.     

Ultrasonographic determination of ovarian follicular. Development in superovulated heifers pretreated with FSH-P at the beginning of the estrous cycle

On Day 3 of the estrous cycle (estrus = Day 0), dairy heifers were given either 10 mg i.m. FSH-P (FSH-P primed; n = 9) or a saline vehicle (saline primed; n = 9). On Day 10, all heifers were superovulated with FSH-P (total = 27.7 mg i.m.) in declining doses over 5 d. Heifers were inseminated artificially at estrus. From Day 2 until estrus, the number and size of follicles >2 mm were monitored daily by ultrasonography. The mean (+/- SEM) number of corpora lutea (CL) (6.2 +/- 1.5 vs 10.7 +/- 0.9; P<0.05) and the mean number of recovered embryos and unfertilized ova (3.6 +/- 1.7 vs 8.4 +/- 2.2; P<0.05) were lower in FSH-P-primed than in saline-primed heifers. Prior to initiation of superovulation, follicles >10 mm appeared on Days 6 to 7 in saline-primed heifers but only on Days 8 to 10 in FSH-P-primed heifers (P<0.05). Also, until Day 10, the mean number of follicles 4 to 6 mm and 7 to 10 mm was higher (P<0.05) in FSH-P-primed than in saline-primed heifers. After initiation of the superovulatory treatment (Day 10 to estrus), saline-primed heifers had a greater and faster increase in the mean number of follicles >10 mm (P<0.02) than FSH-P-primed heifers did. Depletion in the number of follicles 2 to 3 mm (P<0.001) between Day 10 and estrus and in the number of follicles 4 to 6 mm (P<0.05) between Day 12 and estrus occurred in both groups of heifers. Decreased superovulatory response and embryo recovery in FSH-P-primed heifers may have been due to the presence of large follicles (>10 mm) prior to the initiation of the superovulatory treatment which reduced the ability of small follicles to grow into larger size classes during superovulatory treatment.