Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c

A newly designed molecularly imprinted polymer (MIP) material was fabricated and successfully utilized as recognition element to develop a quantum dots (QDs) based MIP-coated composite for selective recognition of the template cytochrome c (Cyt). The composites were synthesized by sol-gel reaction (imprinting process). The imprinting process resulted in an increased affinity of the composites toward the corresponding template. The fluorescence of MIP-coated QDs was stronger quenched by the template versus that of non-imprinted polymer (NIP)-coated QDs, which indicated the composites could recognize the corresponding template. The results of specific experiments further exhibited the recognition ability of the composites. Under optimum conditions, the linear range for Cyt is from 0.97 μM to 24 μM, and the detection limit is 0.41 μM. The new composites integrated the high selectivity of molecular imprinting technology and fluorescence property of QDs and could convert the specific interactions between imprinted cavities and corresponding template to the obvious changes of fluorescence signal. Therefore, a simple and selective sensing system for protein recognition has been realized.     

MULTIPLEX DETECTION OF ESCHERICHIA COLI AND SALMONELLA ENTERITIDIS BY USING QUANTUM DOT-LABELED ANTIBODIES

In this study, we demonstrated the simultaneous detection of Escherichia coli and Salmonella enteritidis, by coupling immunomagnetic separation (IMS) with quantum dots (QDs) labeling. QDs having different emission wavelengths were conjugated with anti- E. coli and anti- Salmonella antibodies. QD–antibody conjugates were used to label immunomagnetically separated bacteria and the fluorescence intensities were measured for enumerations of both species. The concentrations of primary antibodies used in IMS, the ratio of QDs to antibodies during the conjugation and the concentration of QD–antibody conjugates used in labeling were optimized to enhance the sensitivity of the assay. After labeling bacteria with QDs, the quenching observed between bead–bacteria complex and QDs was eliminated by separating QDs from the complex using sodium dodecyl sulfate solution. The fluorescence intensities due to the capturing of different concentrations of bacteria were measured and the working ranges were found to be 5 × 10² to 5 × 10⁵ cfu/mL for E. coli and 4  ×  10² to 4  ×  10⁵ cfu/mL for S. enteritidis .

PRACTICAL APPLICATIONS

In this study, antibody-conjugated multicolor quantum dots (QDs) were used for simultaneous detection of Escherichia coli and Salmonella enteritidis . The results of this study indicate that QD labels can be used in multiplex, rapid and selective detection of bacteria with detection limits comparable with those of many novel methods in cases where the assay conditions are optimized. Furthermore, the assay can be modified for the simultaneous detection of more than two species through using QD labels having different emission wavelengths.     

The application of quantum dots as fluorescent label to glycoarray

A sensitive, specific, and rapid method for the detection of carbohydrate-protein interactions was demonstrated using quantum dots (QDs) as a fluorescence label coupled with protein. 1,3-Dipolar cycloaddition between azide and alkyne was exploited to attach alpha-d-glucopyranoside to a C(14) hydrocarbon chain that noncovalently binds to the microtiter well surface, and the product formation was detected by both electrospray ionization-mass spectrometry (ESI-MS) and QD- (or fluorescein isothiocyanate (FITC))-conjugated lectin binding. It indicated that the peak intensity of the fluorescence emission was proportional to the initial concanavalin A (Con A) concentration in the range of 2 x 10(-3) micromol/L to 2 x 10(-2)mmol/L with a detection limit at least 100 times lower than that of the FITC-based method.     

Fluorescence quenching investigation on the interaction of glutathione‐CdTe/CdS quantum dots with sanguinarine and its analytical application

Water‐soluble glutathione (GSH)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. In pH 5.4 sodium phosphate buffer medium, the interaction between GSH‐CdTe/CdS QDs and sanguinarine (SA) was investigated by spectroscopic methods, including fluorescence spectroscopy and ultraviolet‐visible absorption spectroscopy. Addition of SA to GSH‐CdTe/CdS QDs results in fluorescence quenching of GSH‐CdTe/CdS QDs. Quenching intensity was in proportion to the concentration of SA in a certain range. Investigation of the quenching mechanism, proved that the fluorescence quenching of GSH‐CdTe/CdS QDs by SA is a result of electron transfer. Based on the quenching of the fluorescence of GSH‐CdTe/CdS QDs by SA, a novel, simple, rapid and specific method for SA determination was proposed. The detection limit for SA was 3.4 ng/mL and the quantitative determination range was 0.2–40.0 µg/mL with a correlation coefficient of 0.9988. The method has been applied to the determination of SA in synthetic samples and fresh urine samples of healthy human with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Fluorescence‐based sensor for selective and sensitive detection of amoxicillin (Amox) in aqueous medium: Application to pharmaceutical and biomedical analysis

We here for the first time demonstrate an analytical approach for the highly selective and sensitive detection of amoxicillin (Amox) in aqueous medium based on the fluorescence quenching of quantum dots (QDs). The change in fluorescence intensity of mercaptopropionic acid‐capped cadmium sulphide (MPA‐CdS) QDs is attributed to the increasing concentration of Amox. The results show that the fluorescence quenching of QDs by Amox takes place through both static and dynamic types of quenching mechanism. The fluorescence quenching of QDs with increase in concentration of Amox shows the linear range between 5 μg ml^?1 and 30 μg ml^?1 and the limit of detection (LOD) is 5.19 μg ml^?1. There is no interference of excipients, which are commonly present in pharmaceutical formulation and urine samples. For the practical application approach, the developed method has been successfully applied for the determination of Amox in pharmaceutical formulations and urine samples with acceptable results.     

A nanoprobe for nonprotein thiols based on assembling of QDs and 4-amino-2,2,6,6-tetramethylpiperidine oxide

A new fluorescent nanoprobe, 4-amino-2,2,6,6-tetramethylpiperidine oxide (AT)-functionalized CdTe quantum dots (QDs-AT), was synthesized, for selective detection of nonprotein thiols based on electron transfer (ET). In the presence of nonprotein thiols, the nitroxide radicals in QDs-AT were converted to hydroxylamines, resulting in the fluorescence recovery of the quenched QDs. The detection mechanism of the probe was investigated using Rh-Se-2 probe. The nanoprobe has high sensitivity toward glutathione (GSH) with a detection limit of 7.1 × 10?? M. The fluorescent imaging of living cells showed that QDs-AT could distinguish the concentration differences of GSH in HL-7702 and HepG2 cells.     

Characterization and cancer cell targeted imaging properties of human antivascular endothelial growth factor monoclonal antibody conjugated CdTe/ZnS quantum dots

High luminescence quantum yield water‐soluble CdTe/ZnS core/shell quantum dots (QDs) stabilized with thioglycolic acid were synthesized. QDs were chemically coupled to fully humanized antivascular endothelial growth factor₁₆₅ monoclonal antibodies to produce fluorescent probes. These probes can be used to assay the biological affinity of the antibody. The properties of QDs conjugated to an antibody were characterized by ultraviolet and visible spectrophotometry, fluorescent spectrophotometry, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, transmission electron microscopy and fluorescence microscopy. Cell‐targeted imaging was performed in human breast cancer cell lines. The cytotoxicity of bare QDs and fluorescent probes was evaluated in the MCF‐7 cells with an MTT viability assay. The results proved that CdTe/ZnS QD–monoclonal antibody nanoprobes had been successfully prepared with excellent spectral properties in target detections. Surface modification by ZnS shell could mitigate the cytotoxicity of cadmium‐based QDs. The therapeutic effects of antivascular endothelial growth factor antibodies towards cultured human cancer cells were confirmed by MTT assay. Copyright © 2014 John Wiley & Sons, Ltd.     

Capillary electrophoresis for the characterization of quantum dots after non-selective or selective bioconjugation with antibodies for immunoassay

Capillary electrophoresis coupled with laser-induced fluorescence was used for the characterization of quantum dots and their conjugates to biological molecules. The CE-LIF was laboratory-built and capable of injection (hydrodynamic and electrokinetic) from sample volumes as low as 4 μL via the use of a modified micro-fluidic chip platform. Commercially available quantum dots were bioconjugated to proteins and immunoglobulins through the use of established techniques (non-selective and selective). Non-selective techniques involved the use of EDCHCl/sulfo-NHS for the conjugation of BSA and myoglobin to carboxylic acid-functionalized quantum dots. Selective techniques involved 1) the use of heterobifunctional crosslinker, sulfo-SMCC, for the conjugation of partially reduced IgG to amine-functionalized quantum dots, and 2) the conjugation of periodate-oxidized IgGs to hydrazide-functionalized quantum dots. The migration times of these conjugates were determined in comparison to their non-conjugated QD relatives based upon their charge-to-size ratio values. The performance of capillary electrophoresis in characterizing immunoconjugates of quantum dot-labeled IgGs was also evaluated. Together, both QDs and CE-LIF can be applied as a sensitive technique for the detection of biological molecules. This work will contribute to the advancements in applying nanotechnology for molecular diagnosis in medical field.     

Sensitization enhancement of europium in ZnSe/ZnS core/shell quantum dots induced by efficient energy transfer

Eu‐doped ZnSe:/ZnS quantum dots (formed as ZnSe:Eu/ZnS QDs) were successfully synthesized by a two‐step wet chemical method: nucleation doping and epitaxial shell growing. The sensitization characteristics of Eu‐doped ZnSe and ZnSe/ZnS core/shell QD are studied in detail using photoluminescence (PL), PL excitation spectra (PLE) and time‐resolved PL spectroscopy. The emission intensity of Eu ions is enhanced and that of ZnSe QDs is decreased, implying that energy was transferred from the excited ZnSe host materials (the donor) to the doped Eu ions (the acceptor). PLE reveals that the ZnSe QDs act as an antenna for the sensitization of Eu ions through an energy transfer process. The dynamics of ZnSe:Eu/ZnS core/shell quantum dots with different shell thicknesses and doping concentrations are studied via PL spectra and fluorescence lifetime spectra. The maximum phosphorescence efficiency is obtained when the doping concentration of Eu is approximately 6% and the sample showed strong white light under ultraviolet lamp illumination. By surface modification with ZnS shell layer, the intensity of Eu‐related PL emission is increased approximately three times compared with that of pure ZnSe:Eu QDs. The emission intensity and wavelength of ZnSe:Eu/ZnS core/shell quantum dots can be modulated by different shell thickness and doping concentration. The results provide a valuable insight into the doping control for practical applications in laser, light‐emitting diodes and in the field of biotechnology. Copyright © 2014 John Wiley & Sons, Ltd.     

On the cyto-toxicity caused by quantum dots

Quantum dots (QDs) such as CdSe QDs have been introduced as new fluorophores. The QDs conjugated with antibody are starting to be widely used for immunostaining. However there is still not sufficient analysis of the toxicity of QDs in the literature. Therefore we evaluated the cell damage caused by the quantum dots for biological applications. We performed cell viability assay to determine the difference in cell damage depending on the sizes and colors of mercapto-undecanoic acid (MUA) QDs and the cell types. The results showed that the cell viability decreased with increasing concentration of MUA-QDs. But in the case of Vero cell (African green monkey's kidney cell) with red fluorescence QD (QD640), the cell damage was less than for the others. Furthermore through the flow cytometry assay we found that this cell damage caused by MUA-QD turned out to be cell death after 4-6-hr incubation. From the two assays described above, we found that there is a range of concentration of MUA-QDs where the cell viability decreased without cell death occurring and thus we conclude that attention should be given when MUAQDs are applied to living organisms even in low concentrations.     

Quantum dots as nano plug-in's for efficient NADH resonance energy routing

The routing of fluorescent signals from NADH to quantum dots (QDs) has been a subject of extensive research for FRET based applications. In the present study, the spectral cross talk of NAD(+)/NADH with QDs was used to monitor the reaction of NAD(+)-dependent dehydrogenase enzyme. CdTe QD may undergo dipolar interaction with NADH as a result of broad spectral absorption due to multiple excitonic states resulting from quantum confinement effects. Thus, non-radiative energy transfer can take place from NADH to CdTe QD enhancing QDs fluorescence. Energy routing assay of NADH-QD was applied for detection of formaldehyde as a model analyte in the range 1000-0.01 ng/mL by the proposed technique. We observed proportionate quenching of CdTe QD fluorescence by NAD(+) and enhancement in the presence of NADH formed by various concentrations of enzyme (0.028-0.4 U). Hence, it was possible to detect formaldehyde in the range 1000-0.01 ng/mL with a limit of detection (LOD) at 0.01 ng/mL and regression coefficient R(2)=0.9982. Therefore, a unique optical sensor was developed for the detection of the formaldehyde in sensitive level based on the above mechanism. This method can be used to follow the activity of NAD(+)-dependent enzymes and detection of dehydrogenases in general.     

Quantum dots‐based fluorescence resonance energy transfer biosensor for monitoring cell apoptosis

The development of advanced methods for accurately monitoring cell apoptosis has extensive significance in the diagnostic and pharmaceutical fields. In this study, we developed a rapid, sensitive and selective approach for the detection of cell apoptosis by combining the site‐specific recognition and cleavage of the DEVD–peptide with quantum dots (QDs)‐based fluorescence resonance energy transfer (FRET). Firstly, biotin‐peptide was conjugated on the surface of AuNPs to form AuNPs‐pep through the formation of an Au‐S bond. Then, AuNPs–pep–QDs nanoprobe was obtained through the connection between AuNPs–pep and QDs. FRET is on and the fluorescence of QDs is quenched at this point. The evidence of UV–vis spectra, transmission electron microscopy (TEM), and Fourier transform infrared (FT‐IR) spectroscopy revealed that the connection was successful. Upon the addition of apoptosis cell lysis solution, peptide was cleaved by caspase‐3, and AuNPs was dissociated from the QDs. At this time, FRET is off, and thus the QDs fluorescence was recovered. The experimental conditions were optimized in terms of ratio of peptide to AuNPs, buffer solution, and the temperature of conjugation and enzyme reaction. The biosensor was successfully applied to distinguishing apoptosis cells and normal cells within 2 h. This study demonstrated that the biosensor could be utilized to evaluate anticancer drugs.     

Immunofluorescent labeling of CD20 tumor marker with quantum dots for rapid and quantitative detection of diffuse large B-cell non-Hodgkin's lymphoma

Fluorescent semiconductor quantum dots (QDs) are newfound nanocrystal probes which have been used in bioimaging filed in recent years. The purpose of this study is to evaluate the diagnostic value of specific QDs coupled to rituximab monoclonal antibody against CD20 tumor markers for patients with diffuse large B-cell lymphoma (DLBCL). In current study rituximab-conjugated quantum dots (QDs-rituximab) were prepared against CD20 tumor markers for detection of CD20-positive cells (human Raji cell line) using flowcytometry. A total of 27 tumor tissue samples were collected from patients with DLBCL and 27 subjects with negative pathological tests as healthy ones, which stained by QD-rituximab. The detection signals were obtained from QDs using fluorescence microscopy. The flowcytometry results demonstrated a remarkable difference in fluorescent intensity and FL2-H + (CD20-positive cells percentage) between two groups. Both factors were significantly higher in Raji in comparison with K562 cell line (P < 0.05). Lot of green fluorescence signals was observed due to the selectively binding of QD-rituximab to CD20 tumor markers which overexpressed in tumor tissues and a few signals observed on the defined healthy ones. Based on these observations the cut-off point was 46.8 dots and the sensitivity, specificity, positive predictive value, and negative predictive value were 100%, 89.5%, 91.3%, and 100%, respectively (LR+, 9.52; LR−, 0). The QD - rituximab could be beneficial as a bioimaging tool with high sensitivity to provide an accurate molecular imaging technique for identifying CD20 tumor markers for early diagnosis of the patients with DLBCL.     

Biokinetics and <Emphasis Type="Italic">In Vivo</Emphasis> Distribution Behaviours of Silica-Coated Cadmium Selenide Quantum Dots

Recently, quantum dots derived from trace elements like cadmium and selenium have attracted widespread interest in biology and medicine. They are rapidly being used as novel tools for both diagnostic and therapeutic purposes. In this report, we evaluated the distribution of silica-coated cadmium selenide (CdSe) quantum dots (QDs) following intravenous injection into male Swiss albino mice as a model system for determining tissue localization using in vivo fluorescence and ex vivo elemental analysis by inductively coupled plasma optical emission spectroscopy (ICP-OES). Trioctylphosphine oxide-capped CdSe quantum dots were synthesized and rendered water soluble by overcoating with silica, using aminopropyl silane (APS) as silica precursor. ICP-OES was used to measure the cadmium content to indicate the concentration of QDs in blood, organs and excretion samples collected at predetermined time intervals. Meanwhile, the distribution and aggregation state of QDs in tissues were also investigated in cryosections of the organs by fluorescence microscopy. We have demonstrated that the liver and kidney were the main target organs for QDs. Our systematic investigation clearly shows that most of the QDs were metabolized in the liver and excreted via faeces and urine in vivo. A fraction of free QDs, maintaining their original form, could be filtered by glomerular capillaries and excreted via urine as small molecules within 5 days.     

Folic acid incorporated nitrogen-doped carbon dots as a turn-on fluorescence probe for homocysteine detection

This study describes the development of a low-cost fluorescence assay for detecting homocysteine (Hcy) without the interference of cysteine and glutathione using carbon quantum dots. Herein nitrogen-doped carbon quantum dots (NCDs) were synthesized from citric acid as the carbon source and urea as the dopant using a one-pot microwave-assisted method. The obtained NCDs were incorporated with folic acid (FA) by the direct ex situ addition method and were used as a fluorescence probe to detect Hcy. The probe exhibited a fluorescence turn-on response with increased Hcy concentration up to 50 μM with a limit of detection of 2.276 μM. The point of care detection of Hcy using the probe was also tested with a paper-based assay strip.     

A simple and sensitive label‐free fluorescence sensing of heparin based on Cdte quantum dots

A rapid, simple and sensitive label‐free fluorescence method was developed for the determination of trace amounts of an important drug, heparin. This new method was based on water‐soluble glutathione‐capped CdTe quantum dots (CdTe QDs) as the luminescent probe. CdTe QDs were prepared according to the published protocol and the sizes of these nanoparticles were verified through transmission electron microscopy (TEM), X‐ray diffraction (XRD) and dynamic light scattering (DLS) with an average particle size of about 7 nm. The fluorescence intensity of glutathione‐capped CdTe QDs increased with increasing heparin concentration. These changes were followed as the analytical signal. Effective variables such as pH, QD concentration and incubation time were optimized. At the optimum conditions, with this optical method, heparin could be measured within the range 10.0–200.0 ng mL^?1 with a low limit of detection, 2.0 ng mL^?1. The constructed fluorescence sensor was also applied successfully for the determination of heparin in human serum. Copyright © 2015 John Wiley & Sons, Ltd.     

Detection of pathogenic mycobacteria based on functionalized quantum dots coupled with immunomagnetic separation

Mycobacteria have always proven difficult to identify due to their low growth rate and fastidious nature. Therefore molecular biology and more recently nanotechnology, have been exploited from early on for the detection of these pathogens. Here we present the first stage of development of an assay incorporating cadmium selenide quantum dots (QDs) for the detection of mycobacterial surface antigens. The principle of the assay is the separation of bacterial cells using magnetic beads coupled with genus-specific polyclonal antibodies and monoclonal antibodies for heparin-binding hemagglutinin. These complexes are then tagged with anti-mouse biotinylated antibody and finally streptavidin-conjugated QDs which leads to the detection of a fluorescent signal. For the evaluation of performance, the method under study was applied on Mycobacterium bovis BCG and Mycobacterium tuberculosis (positive controls), as well as E. coli and Salmonella spp. that constituted the negative controls. The direct observation of the latter category of samples did not reveal fluorescence as opposed to the mycobacteria mentioned above. The minimum detection limit of the assay was defined to 10(4) bacteria/ml, which could be further decreased by a 1 log when fluorescence was measured with a spectrofluorometer. The method described here can be easily adjusted for any other protein target of either the pathogen or the host, and once fully developed it will be directly applicable on clinical samples.     

The use of CdTe quantum dot fluorescent microspheres in fluoro-immunoassays and a microfluidic chip system.

Polystyrene fluorescent microspheres prepared by deposition of CdTe quantum dots (QDs) are used in an immunoassay in this study. CdTe QDs/polyelectrolyte multilayers on the surface of polystyrene microspheres have been formed by layer-by-layer self-assembly via electrostatic interactions. As a model antigen, rabbit IgG has been bound to the outermost layer of the fluorescent microspheres. The immunoreaction between fluorescent microspheres/rabbit IgG and the corresponding antibody was confirmed by change of the fluorescence spectrum and competitive immunoassay. This approach allowed detection of the antigen (rabbit IgG) in the range 1-500 mg/L, based on the change in the fluorescence intensity of the reporter (fluorescent microspheres/rabbit IgG). A novel microfluidic chip device with a laser-induced fluorescence system was established and used for the detection of fluorescent microspheres in this study.     

Highly sensitive fluorescence detection of glycoprotein based on energy transfer between CuInS2 QDs and rhodamine B

A highly sensitive fluorescence method for glycoprotein detection has been established based on fluorescence resonance energy transfer (FRET) between CuInS₂ quantum dots (QDs) and rhodamine B (RB). Lectins comprise a group of proteins with unique affinities toward carbohydrate structures, so the process of FRET can occur between lectin‐coated QDs (CuInS₂ QDs–Con A conjugates, acceptors) and carbohydrate‐coated RB (RB–NH₂‐glu conjugates, donors). The fluorescence of lectin‐coated QDs was recovered in the presence of a glycoprotein such as glucose oxidase (GOx) and transferrin (TRF), which significantly reduced the FRET efficiency between the donor and the acceptor. Under optimal conditions, a linear correlation was established between the fluorescence intensity ratio I₆₅₄/I₅₇₇ and the TRF concentration over the range of 6.90 × 10^‐10 to 3.45 × 10^‐8 mol/L, with a detection limit of 2.5 × 10^‐10 mol/L. The linear range for GOx is 3.35 × 10^‐10 to 6.70 × 10^‐8 mol/L, with a detection limit of 1.5 × 10^‐10 mol/L. The proposed method was applied to the determination of glycoprotein in human serum and cell‐extract samples with satisfactory results. Furthermore, CuInS₂ QDs–Con A conjugates are used as safe and efficient optical nanoprobes in HepG2 cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.