Poly(L-lysine)-graft-chitosan copolymers: synthesis, characterization, and gene transfection effect

Polypeptide/polysaccharide graft copolymers poly(L-lysine)-graft-chitosan (PLL-g-Chi) were prepared by ring-opening polymerization (ROP) of epsilon-benzoxycarbonyl L-lysine N-carboxyanhydrides (Z-L-lysine NCA) in the presence of 6-O-triphenylmethyl chitosan. The PLL-g-Chi copolymers were thoroughly characterized by 1H NMR, 13C NMR, Fourier transform infrared (FT-IR), and gel permeation chromatography (GPC). The number-average degree of polymerization of PLL grafted onto the chitosan backbone could be adjusted by controlling the feed ratio of NCA to 6-O-triphenylmethyl chitosan. The particle size of the complexes formed from the copolymer and calf thymus DNA was measured by dynamic light scattering (DLS). It was found in the range of 120 approximately 340 nm. The gel retardation electrophoresis showed that the PLL-g-Chi copolymers possessed better plasmid DNA-binding ability than chitosan. The gene transfection effect in HEK 293T cells of the copolymers was evaluated, and the results showed that the gene transfection ability of the copolymer was better than that of chitosan and was dependent on the PLL grafting ratio. The PLL-g-Chi copolymers could be used as effective gene delivery vectors.     

In vitro investigation on poly(lactide)-Tween 80 copolymer nanoparticles fabricated by dialysis method for chemotherapy

Polysorbate 80 (Tween 80) has been widely used as an emulsifier with excellent effects in nanoparticles technology for biomedical applications. This work was thus triggered to synthesize poly(lactide)/Tween 80 copolymers with various copolymer blend ratio, which were synthesized by ring-opening polymerization and characterized by 1H NMR and TGA. Nanoparticles of poly(lactide)/Tween 80 copolymers were prepared by the dialysis method without surfactants/emulsifiers involved. Paclitaxel was chosen as a prototype anticancer drug due to its excellent therapeutic effects against a wide spectrum of cancers. The drug-loaded nanoparticles of poly(lactide)/Tween 80 copolymers were then characterized by various state-of-the-art techniques, including laser light scattering for particles size and size distribution, field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) for surface morphology; laser Doppler anemometry for zeta potential; differential scanning calorimetry (DSC) for the physical status of the drug encapsulated in the polymeric matrix; X-ray photoelectron spectrometer (XPS) for surface chemistry; high performance liquid chromatography (HPLC) for drug encapsulation efficiency; and in vitro drug release kinetics. HT-29 cells and Glioma C6 cells were used as an in vitro model of the GI barrier for oral chemotherapy and a brain cancer model to evaluate in vitro cytotoxicity of the paclitaxel-loaded nanoparticles. The viability of C6 cells was decreased from 37.4 +/- 4.0% for poly(D,L-lactide-co-glycolic acid) (PLGA) nanoparticles to 17.8 +/- 4.2% for PLA-Tween 80-10 and 12.0 +/- 5.4% for PLA-Tween 80-20 copolymer nanoparticles, which was comparable with that for Taxol at the same 50 microg/mL drug concentration.     

Preparation of low molecular weight N-maleated chitosan-graft-PAMAM copolymer for enhanced DNA complexation

Low molecular weight N-maleated chitosan-graft-PAMAM (polyamidoamine) copolymer was prepared through N-maleated chitosan (NMC) by Michael type addition reaction to enhance its solubility in water as well as its cationic character for enhancement of DNA complexation. FTIR, (1)H NMR, XRD and GPC were used to characterize the graft copolymers. The copolymer showed better DNA complexation ability at low N/P ratio than that of chitosan due to increased surface charge density by the incorporation of PAMAM molecule on to chitosan backbone. The copolymer can effectively protect the DNA toward anionic surfactant. In vitro release study showed efficient DNA release occurred at physiological pH (pH 7.4). In vitro cell cytotoxicity test indicated toward less cytotoxicity of NMC-graft-PAMAM copolymers compared to that of 25kDa PEI. Thus, the synthesized NMC-graft-PAMAM copolymers have great potential of finding application in drug and gene delivery.     

Preparation and characterization of poly(ethylene glycol)-g-chitosan with water- and organosolubility

A new scheme was proposed for synthesizing poly(ethylene glycol)-g-chitosan (PEG-g-CS), where methoxy poly(ethylene glycol) iodide (MPEG-I) (M_n 2000) was used for N-substitution of triphenylmethyl chitosan (TPM-CS) in organic medium. The graft copolymers were obtained by subsequent removal of protecting groups with dichloroacetic acid. By varying PEG-I/TPM-CS feed ratio, the grafting levels (GL) of PEG can be adjusted. The chitosan derivatives were characterized by FTIR, ¹H NMR, ¹³C NMR and DSC. All the copolymers were soluble in water over wide pH range. Furthermore, organosolubility of the hybrids in DMF and DMSO was also achieved when the DS value more than 24%. The lysozyme degradation rate of the copolymers in aqueous neutral medium decreased with the increase of GL value.     

Topology characterization by MALDI-ToF-MS of enzymatically synthesized poly(lactide-co-glycolide)

Lipase catalyzed copolymerization of the monomers lactide and glycolide by Pseudomonas cepacia employing a molar ratio of 80L/20G has been studied. The copolymers were characterized by MALDI-ToF-MS, DSC, SEC and NMR. MALDI-ToF-MS has successfully been used not only to determine end groups and chemical composition but even the microstructure of the copolymers. We demonstrated that for this lipase catalyzed copolymerization, the main product of the reaction at 100 degrees C was linear homopolymer of lactide while at 130 degrees C the main product was cyclic random copolymer.     

Coating of poly(p-xylylene) by PLA-PEO-PLA triblock copolymers with excellent polymer-polymer adhesion for stent applications

Poly(p-xylylene) (PPX) was deposited by chemical vapor deposition (CVD) on stainless steel substrates. These PPX films were coated by solution casting of poly(lactide)-poly(ethylene oxide)-poly(lactide) triblock copolymers (PLA-PEO-PLA) loaded with 14C-labeled paclitaxel. Adhesion of PLA-PEO-PLA on PPX substrate coatings was measured using the blister test method. Excellent adhesion of the block copolymers on PPX substrates was found. Stress behavior and film integrity of PLA-PEO-PLA was compared to pure PLA on unexpanded and expanded stent bodies and was found to be superior for the block copolymers. The release of paclitaxel from the biodegradable coatings was studied under physiological conditions using the scintillation counter method. Burst release of paclitaxel was observed from PLA-PEO-PLA layers regardless of composition, but an increase in paclitaxel loading was observed with increasing content of PEO.     

Preparation, characterization, and in vitro drug release behavior of biodegradable chitosan-graft-poly(1, 4-dioxan-2-one) copolymer

A novel copolymer of chitosan-g-poly(p-dioxanone) (CGP) was synthesized in bulk by ring-opening polymerization of p-dioxanone (PDO) initiated by the hydroxyl group or amino group of chitosan using SnOct₂ as catalyst. The chemical structure was determined by ¹H NMR. It was found that the feed ratio of chitosan to PDO had a great effect on the degree of polymerization (DP) and the substitution (DS) of PDO. The thermal stability and crystallization behavior of graft copolymer CGP were closely related to the values of DP and DS. When the resulting copolymer was used as Ibuprofen carrier, the release rate of Ibuprofen decreased compared with that of pure chitosan carrier. The drug release behavior was also influenced by the structure of graft copolymers.     

Synthesis and characterization of the biodegradable polycaprolactone-graft-chitosan amphiphilic copolymers

A novel synthetic approach to biodegradable amphiphilic copolymers based on poly (epsilon-caprolactone) (PCL) and chitosan was presented, and the prepared copolymers were used to prepare nanoparticles successfully. The PCL-graft-chitosan copolymers were synthesized by coupling the hydroxyl end-groups on preformed PCL chains and the amino groups present on 6-O-triphenylmethyl chitosan and by removing the protective 6-O-triphenylmethyl groups in acidic aqueous solution. The PCL content in the copolymers can be controlled in the range of 10-90 wt %. The graft copolymers were thoroughly characterized by 1H NMR, 13C NMR, FT-IR and DSC. The nanoparticles made from the graft copolymers were investigated by 1H NMR, DLS, AFM and SEM measurements. It was found that the copolymers could form spherical or elliptic nanoparticles in water. The amount of available primary amines on the surface of the prepared nanoparticles was evaluated by ninhydrin assay, and it can be controlled by the grafting degree of PCL.     

Structural characterization of a lipase-catalyzed copolymerization of epsilon-caprolactone and D,L-lactide

The copolymerization of epsilon-caprolactone (epsilon-CL) and d,l-lactide catalyzed by Candida antarctica lipase B was studied. Copolymerizations with different epsilon-CL-to-lactide ratios were carried out, and the product was monitored and characterized by MALDI-TOF MS, GPC, and (1)H NMR. The polymerization of epsilon-CL, which is normally promoted by C. antarctica lipase B, is initially slowed by the presence of lactide. During this stage, lactide is consumed more rapidly than epsilon-CL, and the incorporation occurs dimer-wise with regard to the lactic acid (LA) units. As the reaction proceeds, the relative amount of CL units in the copolymer increases. The nonrandom copolymer structure disappears with time, probably due to a lipase-catalyzed transesterification reaction. In the copolymerizations with a low content of lactide, macrocycles of poly(epsilon-caprolactone) and copolymers having up to two LA units in the ring were detected.     

A new method of controlled grafting modification of chitosan via nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator

The controlled graft modification of chitosan has first been achieved by nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator. Chitosan-TEMPO macroinitiator was obtained from the (60)Co gamma-ray irradiation of N-phthaloylchitosan and 4-hydroxy-TEMPO in DMF under argon atmosphere. The graft copolymers were characterized by (1)H nuclear magnetic resonance ((1)H NMR), Fourier transform infrared spectrometer (FT-IR), X-ray powder diffractometer (XRD) and high performance particle sizer (HPPS). The results indicate that the graft copolymers were successfully synthesized and that the graft polymerization was well controlled by the nitroxide-mediated process. The size distribution of chitosan-g-polystyrene in benzene is very narrow, which may be associated with the "well-defined" polystyrene (PSt) onto chitosan from nitroxide-mediated polymerization. This work provides a new method to prepare chitosan grafting copolymers with controlled molecular weights and "well-defined" structures.     

Liquid,phenylazide-end-capped copolymers of epsilon-caprolactone and trimethylene carbonate: preparation,photocuring characteristics,and surface layering

Photoreactive phenylazide-end-capped liquid copolymers were prepared by ring-opening copolymerization of epsilon-caprolactone (CL) and trimethylene carbonate (TMC) at an equimolar monomer feed ratio in the presence of a polyol, namely, a low-molecular-weight alcohol (di-, tri-, and tetraol) or poly(ethylene glycol) (PEG) as an initiator and tin(II) 2-ethylhexanoate as a catalyst, followed subsequently by phenylazide derivatization at their hydroxyl terminus. These tri- and tetrabranched liquid copolymers (precursors) with a molecular weight from approximately 2500 to 7000 g/mol were cross-linked to yield insoluble solids by ultraviolet (UV) light irradiation. The photocuring rate increased with increasing functionality of phenylazide and UV intensity and decreasing thickness of the liquid film of precursors. The photo-cross-linkability of phenylazide-derivatized liquid copolymers was found to be higher than that of the corresponding coumarin-derivatized liquid copolymers. Poly(lactide) (PLA) films surface-layered with photocured copolymers were prepared by coating surfaces with phenylazide-derivatized copolymers and their subsequent photoirradiation. Endothelial cells adhered well on the nontreated PLA and low-molecular-weight alcohol-based copolymer-layered and photocured films. Little cell adhesion was observed on the hydrolytically surface-eroded PLA film and the PEG-based copolymer-layered film. When a phenylazide-derivatized hexapeptide with the cell-adhesion tripeptidyl sequence, Arg-Gly-Asp (RGD), common to cell adhesive proteins, was photoimmobilized on these surfaces, the surfaces became cell adhesive. Microarchitectured surfaces, which were prepared by sequential procedures of surface coating and photocuring using a photomask with lattice windows, produced regionally differentiated cell adhesiveness.     

Synthesis and self-assembly of chitosan-based copolymer with a pair of hydrophobic/hydrophilic grafts of polycaprolactone and poly(ethylene glycol)

Chitosan-based copolymers with binary grafts of hydrophobic polycaprolactone and hydrophilic poly(ethylene glycol) (CS-g-PCL&PEG) were prepared by a homogeneous coupling reaction of phthaloyl-protected chitosan with functional PCL-COOH and PEG-COOH, following deprotection to regenerate free amino groups back to chitosan backbone. They were characterized by ¹H NMR, Fourier transform infrared and X-ray diffraction analysis. These CS-g-PCL&PEG copolymers could form nano-size self-aggregates in acidic aqueous solution without a specific processing technique, which were investigated using dynamic light scattering and transmission electron microscopy. The formed self-aggregates become smaller with weakened stability upon pH increasing. Moreover, the aggregates of copolymer with higher content of PEG and PCL grafts could remain stable for over 30 days in both acid and neutral condition. A possible mechanism was proposed for the formation of self-aggregates from CS-g-PCL&PEG and their structural changes as pH. It is warranted to find promising application of these self-aggregates based on chitosan as drug carriers.     

Synthesis and characterisation of chitosan-graft-poly(OEGMA) copolymers prepared by ATRP

Two synthetic routes, “grafting-from” and “grafting-to” the chitosan backbone, were investigated to prepare chitosan-graft-poly(OEGMA) copolymers by ATRP. The copolymers were characterised by ¹H NMR and FT-IR spectroscopy, elemental analyses and GPC. Estimates of the degree of grafting were quantitatively found from integration of the ¹H NMR spectra. The GPC data indicated that the hydrodynamic volumes of the polymers were significantly altered by the incorporation of poly(OEGMA). A comparison of the two synthetic methods showed differences in the ratio of synthetic and natural polymers present in the resulting combs. The “grafting-to” synthetic route was preferable as the polymers were of higher purity and more defined.     

Thermo-sensitivity and triggered drug release of polysaccharide nanogels derived from pullulan-g-poly(l-lactide) copolymers

Thermo-responsive nanogels from poly(l-lactide)-g-pullulan (PLP1 and 2) copolymers with different lactide contents were investigated as an anticancer drug delivery carrier. The phase transition temperature of PLP 1 with lower lactide content in distilled water showed around 35 °C. Upon adding 0.15 M NaCl to PLP 1, a significant difference in the transmittance was observed when comparing the non-additive salt condition. The total amount of released doxorubicin (DOX) from the DOX-loaded PLP nanogels increased with increasing temperature for 50 h. A noticeable difference in the initial release by PLP 1 was observed between 37 and 42 °C. In the 50% inhibitory concentration (IC₅₀) analysis, the IC₅₀ values of DOX released from PLP 1 were approximately 5.9 and 9.3 μg/mL at 37 and 42 °C, respectively. The results suggest that self-assembled PLP nanogels, by means of a triggering temperature, can be used as a long-term drug delivery system in cancer treatments.     

Characterization of Polylactide-b-polyisoprene-b-polylactide Thermoplastic Elastomers

Model polylactide-b-polyisoprene-b-polylactide (PLA-PI-PLA) triblock copolymers were prepared by an efficient protocol starting with alpha,omega-dihydroxy polyisoprene (HO-PI-OH). Using a moderately electrophilic Al(O-i-Pr)(3) catalyst and carefully controlling the ratio of Al to HO-PI-OH avoided gel formation and resulted in acceptable lactide polymerization rates. The triblock copolymers were free of homopolymer or diblock contaminants as determined by chromatographic and spectroscopic analyses. Three representative PLA-PI-PLA materials were prepared with spherical, cylindrical, and lamellar morphologies as confirmed by small-angle X-ray scattering and transmission electron microscopy. We employed dynamic mechanical analysis and tensile testing to assess the viscoelastic and mechanical behavior. The morphology largely determined the tensile properties of these materials, with the Young's modulus and ultimate tensile strength following predicted trends. Excellent elongations were achieved especially for the PLA-PI-PLA sample with the cylindrical morphology, and the PLA-PI-PLA sample with the spherical morphology showed the best elastomeric recovery. Microphase alignment and pull rate significantly influenced the resultant tensile properties.     

Facile preparation of biodegradable chitosan derivative having poly(butylene glycol adipate) side chains

Various modes are being explored for the construction of functional materials from nanoparticles. Despite these efforts, the assembly of nanoparticles remains challenging with respect to the requirement of multiple component organization on varying dimensions and length scales. The graft copolymers of chitosan with poly(butylene glycol adipate) (PBGA) were prepared due to the esterification reaction between PBGA and 6-O-succinate-N-phthaloyl-chitosan (PHCSSA) in the presence of toluene as a swelling agent. The graft copolymers are nanoparticles with the size of few hundred nanometers as observed from TEM. It is a potential method to combine chitosan with the hydrophobic synthetic polymers. The grafting reactions were conducted with various PBGA/PHCSSA feed ratios to obtain chitosan-g-PBGA copolymers with various PBGA contents. FT-IR, NMR, XRD, spectrofluorophotometer, and TEM were detected to characterize the copolymers.     

Chitosan nanoparticle as gene therapy vector via gastrointestinal mucosa administration: results of an in vitro and in vivo study

This study was designed to investigate the in vitro and in vivo transfection efficiency of chitosan nanoparticles used as vectors for gene therapy. Three types of chitosan nanoparticles [quaternized chitosan -60% trimethylated chitosan oligomer (TMCO-60%), C(43-45 KDa, 87%), and C(230 KDa, 90%)] were used to encapsulate plasmid DNA (pDNA) encoding green fluorescent protein (GFP) using the complex coacervation technique. The morphology, optimal chitosan-pDNA binding ratio and conditions for maximal in vitro transfection were studied. The in vivo transfection was conducted by feeding the chitosan/pDNA nanoparticles to 12 BALB/C-nu/nu nude mice. Both conventional and TMCO-60% could form stable nanoparticles with pDNA. The in vitro study showed the transfection efficiency to be in the following descending order: TMCO-60%>C(43-45 KDa, 87%)>C(230 KDa, 90%). TMCO-60% proved to be the most efficient and the optimal chitosan/pDNA ratio being 3.2:1. In vivo study showed most prominent GPF expression in the gastric and upper intestinal mucosa. GFP expression in the mucosa of the stomach and duodenum, jejunum, ileum, and large intestine were found, respectively, in 100%, 88.9%, 77.8% and 66.7% of the nude mice examined. TMCO-60%/pDNA nanoparticles had better in vitro and in vivo transfection activity than the other two, and with minimal toxicity, which made it a desirable non-viral vector for gene therapy via oral administration.     

In-situ formation of biodegradable hydrogels by stereocomplexation of PEG-(PLLA)8 and PEG-(PDLA)8 star block copolymers

Eight-arm poly(ethylene glycol)-poly(L-lactide), PEG-(PLLA)(8), and poly(ethylene glycol)-poly(D-lactide), PEG-(PDLA)(8), star block copolymers were synthesized by ring-opening polymerization of either L-lactide or D-lactide at room temperature in the presence of a single-site ethylzinc complex and 8-arm PEG (M(n) = 21.8 x 10(3) or 43.5 x 10(3)) as a catalyst and initiator, respectively. High lactide conversions (>95%) and well-defined copolymers with PLLA or PDLA blocks of the desired molecular weights were obtained. Star block copolymers were water-soluble when the number of lactyl units per poly(lactide) (PLA) block did not exceed 14 and 17 for PEG21800-(PLA)(8) and PEG43500-(PLA)(8), respectively. PEG-(PLA)(8) stereocomplexed hydrogels were prepared by mixing aqueous solutions with equimolar amounts of PEG-(PLLA)(8) and PEG-(PDLA)(8) in a polymer concentration range of 5-25 w/v % for PEG21800-(PLA)(8) star block copolymers and of 6-8 w/v % for PEG43500-(PLA)(8) star block copolymers. The gelation is driven by stereocomplexation of the PLLA and PDLA blocks, as confirmed by wide-angle X-ray scattering experiments. The stereocomplexed hydrogels were stable in a range from 10 to 70 degrees C, depending on their aqueous concentration and the PLA block length. Stereocomplexed hydrogels at 10 w/v % polymer concentration showed larger hydrophilic and hydrophobic domains as compared to 10 w/v % single enantiomer solutions, as determined by cryo-TEM. Correspondingly, dynamic light scattering showed that 1 w/v % solutions containing both PEG-(PLLA)(8) and PEG-(PDLA)(8) have larger "micelles" as compared to 1 w/v % single enantiomer solutions. With increasing polymer concentration and PLLA and PDLA block length, the storage modulus of the stereocomplexed hydrogels increases and the gelation time decreases. Stereocomplexed hydrogels with high storage moduli (up to 14 kPa) could be obtained at 37 degrees C in PBS. These stereocomplexed hydrogels are promising for use in biomedical applications, including drug delivery and tissue engineering, because they are biodegradable and the in-situ formation allows for easy immobilization of drugs and cells.     

Synthesis and characterization of poly(d,l-lactic acid) via enzymatic ring opening polymerization by using free and immobilized lipase

Abstract

Polylactic acid is an interesting biodegradable and bioabsorbable material, and is produced from lactic acid, either by the direct polycondensation of lactic acid or via the ring-opening polymerization (ROP) of lactide. A future target of it is to improve some of the polyester properties for specific biomedical applications. The biocatalytic ROP of lactide is attractive as a route to polymer synthesis due to its lack of toxic reactants, mild reaction requirements, and recyclability of immobilized enzyme. Therefore, the use of immobilized enzymes is also being investigated.

The aim of this work was to develop a methodology to synthesize high molecular weight polylactic acid via enzymatic ROP method using free enzyme and Candida antarctica lipase B (CALB) immobilized onto chitin and chitosan. The efficiency of the two approaches has been compared, with polymerization kinetics and resulting products fully characterized by FT-IR, NMR, DSC, XRD, and TGA analyses.     

Renewable-resource thermoplastic elastomers based on polylactide and polymenthide

An alpha,omega-functionalized polymenthide was synthesized by the ring-opening polymerization of menthide in the presence of diethylene glycol with diethyl zinc as the catalyst. Termination with water afforded the dihydroxy polymenthide. The reaction of this telechelic polymer with triethylaluminum formed the corresponding aluminum alkoxide macroinitiator that was used for the controlled polymerization of lactide to yield biorenewable polylactide-b-polymenthide-b-polylactide triblock copolymers. The molecular weight and chemical composition were easily adjusted by the monomer-to-initiator ratios. Microphase separation in these triblock copolymers was confirmed by small-angle X-ray scattering and differential scanning calorimetry. A representative triblock was prepared with a hexagonally packed cylindrical morphology as determined by small-angle X-ray scattering, and tensile testing was employed to assess the mechanical behavior. On the basis of the ultimate elongations and elastic recovery, these triblock copolymers behaved as thermoplastic elastomers.