Direct dissolution of cellulose in NaOH/thiourea/urea aqueous solution

Untreated cellulose was directly and quickly dissolved in NaOH/thiourea/urea aqueous solution. The mechanism of dissolution was investigated by SEM, WXRD and (13)C NMR. The components of this solvent cannot dissolve cellulose on their own, and the interactions between NaOH and urea, as well as between NaOH and thiourea, play an important role in improving the dissolution of cellulose. Moreover, (13)C NMR spectra proved that NaOH, thiourea, and urea were bound to cellulose molecules, which brings cellulose molecules into aqueous solution to a certain extent and prevents cellulose macromolecules from associating. (13)C NMR spectra of the cellulose solution show that this novel mixture is a direct solvent. Optical microscopy and CP MAS (13)C NMR were used to study the process of dissolution. The results reveal that cellulose is dissolved completely and that cellulose I (cotton linter) first changes to amorphous cellulose chains in solution, and then to cellulose II during regeneration. Moreover, a new, more effective dissolution method is proposed, as confirmed by dynamic rheology measurements.     

Enhancement of enzymatic saccharification of cellulose by cellulose dissolution pretreatments

Attempts were made to enhance cellulose saccharification by cellulase using cellulose dissolution as a pretreatment step. Four cellulose dissolution agents, NaOH/Urea solution, N-methylmorpholine-N-oxide (NMMO), ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and 85% phosphoric acid were employed to dissolve cotton cellulose. In comparison with conventional cellulose pretreatment processes, the dissolution pretreatments were operated under a milder condition with temperature <130 °C and ambient pressure. The dissolved cellulose was easily regenerated in water. The regenerated celluloses exhibited a significant improvement (about 2.7- to 4.6-fold enhancement) on saccharification rate during 1st h reaction. After 72 h, the saccharification yield ranged from 87% to 96% for the regenerated celluloses while only around 23% could be achieved for the untreated cellulose. Even with high crystallinity, cellulose regenerated from phosphoric acid dissolution achieved the highest saccharification rates and yield probably due to its highest specific surface area and lowest degree of polymerization (DP).     

Transparent cellulose films with high gas barrier properties fabricated from aqueous alkali/urea solutions

Transparent and bendable regenerated cellulose films prepared from aqueous alkali (NaOH or LiOH)/urea (AU) solutions exhibit high oxygen barrier properties, which are superior to those of conventional cellophane, poly(vinylidene chloride), and poly(vinyl alcohol). Series of AU cellulose films are prepared from different cellulose sources (cotton linters, microcrystalline cellulose powder, and softwood bleached kraft pulp) for different dissolution and regeneration conditions. The oxygen permeabilities of these AU cellulose films vary widely from 0.003 to 0.03 mL μm m(-2) day(-1) kPa(-1) at 0% relative humidity depending on the conditions used to prepare the films. The lowest oxygen permeability is achieved for the AU film prepared from 6 wt % cellulose solution by regeneration with acetone at 0 °C. The oxygen permeabilities of the AU cellulose films are negatively correlated with their densities, and AU films prepared from solutions with high cellulose concentrations by regeneration in a solvent at low temperatures generally have low oxygen permeabilities. The AU cellulose films are, therefore, promising biobased packaging materials with high-oxygen barrier properties.     

Liquid hot water and alkaline pretreatment of soybean straw for improving cellulose digestibility

Soybean straw was pretreated with either liquid hot water (LHW) (170-210 °C for 3-10 min) or alkaline soaking (4-40 g NaOH/100 g dry straw) at room temperature to evaluate the effects on cellulose digestibility. Nearly 100% cellulose was recovered in pretreated solids for both pretreatment methods. For LHW pretreatment, xylan dissolution from the raw material increased with pretreatment temperature and time. Cellulose digestibility was correlated with xylan dissolution. A maximal glucose yield of 70.76%, corresponding to 80% xylan removal, was obtained with soybean straw pretreated at 210 °C for 10 min. NaOH soaking at ambient conditions removed xylan up to 46.37% and the subsequent glucose yield of pretreated solids reached up to 64.55%. Our results indicated LHW pretreatment was more effective than NaOH soaking for improving cellulose digestibility of soybean straw.     

Facile approach for the dispersion of regenerated cellulose in aqueous system in the form of nanoparticles

This study reports a facile method to disperse cellulose in deionized water, wherein a critical condition of regenerated cellulose is discovered, where it completely disperses up to a maximum of 5 g L(-1) concentration in deionized water with the help of ultrasonication. The dispersed cellulose is characterized by TEM and DLS, the latter among which shows 200 nm hydrodynamic radii of cellulose nanoparticles dispersed in deionized water. FTIR analysis of dispersed cellulose reveals that dispersed cellulose losses its crystallinity during regeneration and dispersion step employed in this study. The dispersed cellulose reported in this study is able to form free-standing, transparent films, which were characterized by SEM, XRD, TGA, EDX, and FTIR spectroscopy and show resistance against dissolution in water. Additionally, the dispersed cellulose is able to undergo at least three times faster enzymatic hydrolysis in comparison to pristine microcrystalline cellulose under similar reaction conditions. The dispersed cellulose reported here could be a better material for reinforcement, preparation of hydrogels, and drug delivery applications under physiological environment.     

Structure study of cellulose fibers wet-spun from environmentally friendly NaOH/urea aqueous solutions

In this study, structure changes of regenerated cellulose fibers wet-spun from a cotton linter pulp (degree of polymerization approximately 620) solution in an NaOH/urea solvent under different conditions were investigated by simultaneous synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS). WAXD results indicated that the increase in flow rate during spinning produced a better crystal orientation and a higher degree of crystallinity, whereas a 2-fold increase in draw ratio only affected the crystal orientation. When coagulated in a H2SO4/Na2SO4 aqueous solution at 15 degrees C, the regenerated fibers exhibited the highest crystallinity and a crystal orientation comparable to that of commercial rayon fibers by the viscose method. SAXS patterns exhibited a pair of meridional maxima in all regenerated cellulose fibers, indicating the existence of a lamellar structure. A fibrillar superstructure was observed only at higher flow rates (>20 m/min). The conformation of cellulose molecules in NaOH/urea aqueous solution was also investigated by static and dynamic light scattering. It was found that cellulose chains formed aggregates with a radius of gyration, Rg, of about 232 nm and an apparent hydrodynamic radius, Rh, of about 172 nm. The NaOH/urea solvent system is low-cost and environmentally friendly, which may offer an alternative route to replace more hazardous existing methods for the production of regenerated cellulose fibers.     

Solid-state 13C NMR study of na-cellulose complexes

The interaction of microcrystalline cellulose from cotton and aqueous sodium hydroxide was investigated by 13C NMR solid-state spectroscopy as a function of temperature and sodium hydroxide concentration. When the concentration of NaOH was increased, the initial cellulose spectrum was replaced successively by that of Na-cellulose I followed by that of Na-cellulose II. In Na-cellulose I, each carbon atom occurred as a singlet, thus implying that one glucosyl moiety was the independent magnetic residue in the structure of this allomorph. In addition, the occurrence of the C6 near 62 ppm is an indication of a gt conformation for the hydroxymethyl group of Na-cellulose I. In Na-cellulose II, the analysis of the resonances of C1 and C6 points toward a structure based on a cellotriosyl moiety as the independent magnetic residue, in agreement with the established X-ray analysis that has shown that for this allomorph, the fiber repeat was also that of a cellotriosyl residue. For Na-cellulose II, the occurrence of the C6 in the 60 ppm region indicates an overall gg conformation for the hydroxymethyl groups. A comparison of the spectra recorded at 268 K and at room temperature confirms the stronger interaction of NaOH with cellulose when the temperature is lowered. In the Q region, corresponding to NaOH concentrations of around 9% and temperatures below 277 K, most of the sample was dissolved and no specific solid-state 13C NMR spectrum could be recorded, except for that of a small fraction of undissolved cellulose I. The same experiment run on a wood pulp sample leads to a new spectrum, with spectral characteristics different from those of Na-cellulose I and Na-cellulose II. This new spectrum is assigned to the Q phase, which appears to result from topological constraints that are present in whole wood pulp fibers but not in microcrystalline cellulose. A spectrum recorded for samples in the Na-cellulose III conditions resembled that of Na-cellulose II but of lower resolution. Similarly, a spectrum of a sample of Na-cellulose IV was identical to that of hydrated cellulose II. These observations have allowed us to propose a simplified phase diagram of the cellulose/NaOH system in terms of temperature and NaOH concentration. This diagram, which is simpler than the one deduced from X-ray analysis, consists of only four different regions partially overlapping.     

Investigation of the spinnability of cellulose/alkaline ferric tartrate solutions

Dynamic rheology, UV/VIS spectrometry with temperature programming cuvette and reaction calorimetry were conducted on cellulose pulp/FeTNa (NaOH solution containing ferric tartaric acid complex) solutions to investigate their thermostability and spinnability. Color of cellulose/FeTNa solutions changed above 90 °C due to the decomposition of the complex. Thermal activity of cellulose/FeTNa solution started above 130 °C induced by water vapor evolution and complex decomposition. Regeneration of cellulose/FeTNa solutions in a non-solvent (acetic acid and Na-gluconate mixture) resulted in transition from cellulose I into cellulose II structure as revealed by WAXS measurements. Wet-spinning attempts of cellulose/FeTNa solutions yielded fiber-like shaped bodies with a brittle structure.     

Influence of the supramolecular structure and physicochemical properties of cellulose on its dissolution in a lithium chloride/N,N-dimethylacetamide solvent system

The present work deals with the effects of structural variables of celluloses on their dissolution in the solvent system LiCl/N,N-dimethylacetamide, LiCl/DMAc. Celluloses from fast growing sources (sisal and linters), as well as microcrystalline cellulose (avicel PH-101) were studied. The following structural variables were investigated: index of crystallinity, I(c); crystallite size; polymer porosity; and degree of polymerization determined by viscosity, DPv. Mercerization of fibrous celluloses was found to decrease DPv, I(c), the specific surface area, and the ratio pore volume/radius. The relevance of the structural properties of cellulose to its dissolution is discussed. Rate constants and activation parameters of cellulose decrystallization, prior to its solubilization, have been determined under nonisothermal conditions. The kinetic parameters calculated showed that dissolution is accompanied with small, negative enthalpy and a large, negative entropy of activation.     

Structure of cellulose II hydrate

A hydrate of cellulose II can be formed by swelling Fortisan fibers in hydrazine and then washing in water. The hydrate is stable at 93% relative humidity and has a monoclinic unit cell with dimensions a = 9.02 Å, b = 9.63 Å, c = 10.34 Å, and γ = 116.0°; the space group is P2₁. The unit cell contains disaccharide sections of two chains and approximately four water molecules. The structure was refined using the LALS method, based on 10 observed and 10 unobserved reflections. An antiparallel arrangement of adjacent chains was assumed, since this occurs in cellulose II (the starting material), and the hydrate also reverts to cellulose II on dehydration. Refinement of the positions and side-chain conformations of the chains shows that the chains are stacked in the same way as in cellulose II, and the hydrate is formed by insertion of water molecules between the stacks. However, all efforts to arrange the water molecules in crystallographically regular positions led to unsatisfactory agreement between the observed and calculated intensities. These results suggest an irregular arrangement of the water molecules, which was modeled using water-weighted atomic scattering factors. The analysis resulted in two refined models with relative chain staggers of ～ +c/4 and ～ -c/4, which are indistinguishable in terms of the x-ray agreement. Our preference is for the +c/4 model, for which the stacks of chains are analogous to those in cellulose II.     

Interaction among molecules in mixtures of ceramide/stearic acid,ceramide/cholesterol and ceramide/stearic acid/cholesterol

To elucidate the interaction among the molecules which constitute intercellular lipids of stratum corneum, the phase diagrams in the binary mixtures of N-octadecanoyl-phytosphingosine (CER)/stearic acid (SA) and CER/cholesterol (CHOL) were studied by differential scanning calorimetry and by small- and wide-angle X-ray diffraction. These phase diagrams are mostly expressed by a eutectic type one. However, from their detailed analyses, it was revealed that in the phase diagram of CER/SA a new solid structure is formed just above the eutectic temperature. The lamellar spacing of the new structure is nearly equal to the length given by the sum of the two molecules of CER and/or SA, that is, in the lipid bilayer the hydrocarbon chains of CER and SA lie almost perpendicular to the lipid bilayer surface and the two kinds of molecules distribute homogeneously. On the other hand, in the binary mixture of CER/CHOL, CHOL molecules are apt to be isolated from the mixture. In a ternary mixture composed of equimolar lipids of CER, CHOL and SA, it was found that a pseudo-hexagonal structure takes place even in the solid state. This fact indicates that the three components are miscible and the hydrocarbon chains lie perpendicular to the lipid bilayer surface. We can draw the conclusion that the multi-component mixtures containing ceramide are apt to form the lamellar structure where even in the solid state the hydrocarbon chains lie perpendicular to the lipid bilayer surface and the components with hydrocarbon chains distribute homogeneously.     

Cell growth and cellulase production inTrichoderma viride on microcrystalline cellulose

The production of CM and FP cellulases was studied during the growth of a wild strain ofTrichoderma viride on microcrystalline cellulose. Part of the enzymes was found to be released into the medium while another part remained bound to the cell. Bound cellulases are released into the medium at the stage of cell lysis which takes place in the post-stationary phase. In this period extracellular CM and FP cellulases attain maximum activities. When the hyphae are subjected to a cold shock, maximum cellulase activity is detected already at the beginning of the stationary phase. An indirect method of dry cell mass determination showed that during exponential growth of cells on microcrystalline cellulose the μmax was 0.23 and the yield coefficient was 41 %.     

Production of immunoadsorbents based on cellulose carbonates and their application to the isolation of specific immunoglobulin light chains

The purification of rabbit immunoglobulin molecules expressing kappa (κ) light chains, utilizing the allotypic specificity b4, has been achieved in stages involving isolation of specific antibody, preparation of a solid phase immunoadsorbent of coupled antibody, and subsequent isolation of b4 (κ) IgG. Cellulose trans-2.3-carbonate is shown to be an effective matrix enabling chemical coupling of antibodies and antigens to the support at neutral pH thus preservng immunological activity. The trans-2,3-carbonate derived from microcrystalline cellulose is more effective as a matrix than the trans-2,3-carbonate derived from macroporous cellulose for the chemical coupling of rabbit a1a3/b4 IgG antigen and binding of specific anti-b4 antibody. The microcrystalline celulose carbonate is also more efficient for the coupling of rabbit anti-b4 antibody and the subsequent binding and elution of rabbit b4 (κ) IgG, thus separating immunoglobulin, expressing kappa light chain, from that expressing lambda light chain. The purification technique has potential application in other allotypic systems and antibody- antigen populations.     

An ionic liquid as reaction media for radiation-induced grafting of thermosensitive poly (N-isopropylacrylamide) onto microcrystalline cellulose

This paper reports a homogeneous modification of microcrystalline cellulose (MCC) in ionic liquids via radiation-induced grafting. Thermosensitive poly (N-isopropylacrylamide) (PNIPAAm) was successfully grafted onto MCC in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) ionic liquid using γ-ray irradiation technique at room temperature. The grafting yield (GY) increased with dose up to 40 kGy, while decreased slightly with dose rate from 22 to 102 Gy/min. The results of TGA indicated that cellulose grafted PNIPAAm (cellulose-g-PNIPAAm) had higher thermal stability than that of ungrafted regenerated cellulose (reg-cellulose). The crystalline structure of original MCC was largely destroyed during the dissolution process according to the XRD profiles, and grafting PNIPAAm onto cellulose further decreased the intensity of crystallinity. SEM showed that reg-cellulose and cellulose-g-PNIPAAm films displayed dense and homogeneous morphology. Moreover, the resulting cellulose-g-PNIPAAm exhibited obvious thermal sensitivity with a lower critical solution temperature around 35 °C, which was observed from the swelling behavior in water at different temperatures.     

FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide

Cellulose samples treated with sodium hydroxide (NaOH) and carbon dioxide in dimethylacetamide (DMAc) were analyzed by FTIR spectroscopy. Absorbance of hydrogen-bonded OH stretching was considerably decreased by the treatment of NaOH and carbon dioxide. The relative absorbance ratio (A(4000-2995)/A(993)) represented the decrease of absorbance as a criterion of hydrogen-bond intensity (HBI). The absorbance of the band at 1430cm(-1) due to a crystalline absorption was also decreased by NaOH treatment. The absorbance ratio of the bands at 1430 and 987-893cm(-1) (A(1430)/A(900)), adopted as crystallinity index (CI), was closely related to the portion of cellulose I structure. With the help of FTIR equipped with an on-line evacuation apparatus, broad OH bending due to bound water could be eliminated. FTIR spectra of the carbon dioxide-treated cellulose samples at 1700-1525cm(-1) were divided into some bands including 1663, 1635, 1616, and 1593cm(-1). The broad OH bending due to bound water at 1641-1645cm(-1) was resolved to two bands at 1663 and 1635cm(-1). As a trace of DMAc, the band at 1616cm(-1) is disappeared by washing for the cellulose treated with carbon dioxide (Cell 1-C and Cell 2/60-C). The decrease of HBI, the easy removal of DMAc, and the band at 1593cm(-1) supported the introduction of new chemical structure in cellulose. The bands shown at 1593 and 1470cm(-1) was assigned as hydrogen-bonded carbonyl stretching and O-C-O stretching of the carbonate ion.     

Effect of cellulase mole fraction and cellulose recalcitrance on synergism in cellulose hydrolysis and binding

Elucidating the molecular mechanisms that govern synergism is important for the rational engineering of cellulase mixtures. Our goal was to observe how varying the loading molar ratio of cellulases in a binary mixture and the recalcitrance of the cellulose to enzymatic degradation influenced the degree of synergistic effect (DSE) and degree of synergistic binding (DSB). The effect of cellulose recalcitrance was studied using a bacterial microcrystalline cellulose (BMCC), which was exhaustively hydrolyzed by a catalytic domain of Cel5A, an endocellulase. The remaining prehydrolyzed BMCC (PHBMCC) was used to represent a recalcitrant form of cellulose. DSE was observed to be sensitive to loading molar ratio. However, on the more recalcitrant cellulose, synergism decreased. Furthermore, the results from this study reveal that when an exocellulase (Cel6B) is mixed with either an endocellulase (Cel5A) or a processive endocellulase (Cel9A) and reacted with BMCC, synergism is observed in both hydrolysis and binding. This study also revealed that when a "classical" endocellulase (Cel5A) and a processive endocellulase (Cel9A) are mixed and reacted with BMCC, only limited synergism is observed in reducing sugar production; however, binding is clearly increased by the presence of the Cel5A.     

Effect of solvent exchange on the solid structure and dissolution behavior of cellulose

Effects of solvent exchange and milling on the solid structure of cellulose were investigated, using small- and wide-angle X-ray scattering and solid-state NMR. The solvent exchange facilitated the dissolution of cellulose in LiCl/DMAc with no change of the crystalline structure of cellulose. In contrast, the milling never facilitated the dissolution of cellulose, though the crystalline structure was almost destroyed. These facts show that the crystalline structure of cellulose hardly affects the dissolution in LiCl/DMAc. The fractal dimensions determined by the small-angle X-ray scattering measurements were increased by the solvent exchange, suggesting that the aggregation state of the cellulose microfibril is affected. It was also suggested by the NMR (1)H spin relaxation time measurements that the solvent exchange enhances the molecular mobility of cellulose and shortens the characteristic length along the microfibril, which allows easier access of the solvent molecule to cellulose.     

Biohydrogen generation by mesophilic anaerobic fermentation of microcrystalline cellulose

Sixteen batch experiments were performed to evaluate the stability, kinetics, and metabolic paths of heat-shocked digester (HSD) sludge that transforms microcrystalline cellulose into hydrogen. Highly reproducible kinetic and metabolic data confirmed that HSD sludge could stably convert microcrystalline cellulose to hydrogen and volatile fatty acids (VFA) and induce metabolic shift to produce alcohols. We concluded that clostridia predominated the hydrogen-producing bacteria in the HSD sludge. Throughout this study the hydrogen percentage in the headspace of the digesters was greater than 50% and no methanogenesis was observed. The results emphasize that hydrogen significantly inhibited the hydrogen-producing activity of sludge when initial microcrystalline cellulose concentrations exceeded 25.0 g/L. A further 25 batch experiments performed with full factorial design incorporating multivariate analysis suggested that the ability of the sludge to convert cellulose into hydrogen was influenced mainly by the ratio of initial cellulose concentration (So) to initial sludge density (Xo), but not by interaction between the variables. The hydrogen-producing activity depended highly on interaction of So x (So/Xo). Through response surface analysis it was found that a maximum hydrogen yield of 3.2 mmol/g cellulose occurred at So = 40 g/L and So/Xo = 8 g cellulose/g VSS. A high specific rate of 18 mmol/(g VSS-d) occurred at So = 28 g/L and So/Xo = 9 g cellulose/g VSS. These experimental results suggest that high hydrogen generation from cellulose was accompanied by low So/Xo.     

Structural changes in microcrystalline cellulose in subcritical water treatment

Subcritical water is a high potential green chemical for the hydrolysis of cellulose. In this study microcrystalline cellulose was treated in subcritical water to study structural changes of the cellulose residues. The alterations in particle size and appearance were studied by scanning electron microscopy (SEM) and those in the degree of polymerization (DP) and molar mass distributions by gel permeation chromatography (GPC). Further, changes in crystallinity and crystallite dimensions were quantified by wide-angle X-ray scattering and (13)C solid-state NMR. The results showed that the crystallinity remained practically unchanged throughout the treatment, whereas the size of the remaining cellulose crystallites increased. Microcrystalline cellulose underwent significant depolymerization in subcritical water. However, depolymerization leveled off at a relatively high degree of polymerization. The molar mass distributions of the residues showed a bimodal form. We infer that cellulose gets dissolved in subcritical water only after extensive depolymerization.     

Homogeneous quaternization of cellulose in NaOH/urea aqueous solutions as gene carriers

Quaternized celluloses (QCs) were homogeneously synthesized by reacting cellulose with 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHPTAC) in NaOH/urea aqueous solutions. The structure and solution properties of the QCs were characterized by using elemental analysis, FTIR, (13)C NMR, SEC-LLS, viscometer, and zeta-potential measurement. The results revealed that water-soluble QCs, with a degree of substitution (DS) value of 0.20-0.63, could be obtained by adjusting the molar ratio of CHPTAC to anhydroglucose unit (AGU) of cellulose and the reaction time. The QC solutions in water displayed a typical polyelectrolyte behavior, and the intrinsic viscosity ([eta]) value determined from the Fuoss-Strauss method increased with increasing DS value. Moreover, two QC samples (DS = 0.46 and 0.63) were selected and studied as gene carriers. The results of gel retardation assay suggested that QCs could condense DNA efficiently. QCs displayed relatively lower cytotoxicity as compared with PEI, and QC/DNA complexes exhibited effective transfection compared to the naked DNA in 293T cells. The quaternized cellulose derivatives prepared in NaOH/urea aqueous solutions could be considered as promising nonviral gene carriers.