Crystalline structure,orientation and nucleation of the nacreous tablets in the cephalopod <Emphasis Type="Italic">Nautilus</Emphasis>

The nacreous tablets in the Nautilus shell have similar crystalline structure as the tablets in the gastropod Gibbula shell. Etching with Mutvei’s solution reveals that each tablet is composed of vertical crystalline columns that are structurally similar to the acicular crystallites in the outer spherulitic-prismatic layer of the shell wall. The columns are attached to each other to form numerous vertical crystalline lamellae, oriented parallel to the longitudinal axis of the tablet. It is still unknown whether or not the orientation of the vertical lamellae corresponds to that of the crystallographic a- or b-axis. The orientation of the crystalline lamellae in the adjacent tablets is parallel in some nacreous laminae, but random in other laminae. Similar large variation was found in the nacreous tablets of the gastropod and bivalve shells. The nucleation sites of the nacreous tablets are predominantly situated on the peripheral portion of the upper surface of the preceding tablet, both in the shell wall and septa. The “aragonite-nucleating proteins” in the central portion of the crystal imprints of the organic interlamellar sheets, described by several writers, have therefore a negative correlation with the nucleation sites of the nacreous tablets.     

Characteristics of shell microstructure and growth analysis of the Antarctic bivalve <Emphasis Type="Italic">Laternula elliptica</Emphasis> from Lützow-Holm Bay,Antarctica

Growth performance of the Antarctic bivalve Laternula elliptica was examined both by shell microstructural observation and by applying a fluorescent substance, tetracycline, as a shell growth marker. The shell was composed of two calcareous layers: the thick outer layer was homogeneous or granular in structure and the thin inner layer was nacreous. The architecture of Antarctic L. elliptica was different from that of temperate L. marilina, and the ratio of thickness between the outer and inner layers appeared to be different. The growth rate of the nacreous layer was analyzed to be very low. High correlations were found between the major axis of chondrophore and both shell length and shell dry weight, respectively. It is suggested that the chondrophore is an appropriate growth indicator, and combining the information of growth increments with the fluorescent method may be useful in estimating the bivalve growth performance in the Antarctic sea.     

Ultrastructural Characteristics of the Nacre in Some Gastropods

The nacreous layer in Gibbula, Calliostoma, Trochus and Haliotis is described on the basis of scanning electron microscopic studies. The central part of each nacreous tablet contains a significant amount of calcified organic matrix which is insoluble in a chromium sulphate and a 25% glutaraldehyde solution. In most cases, the tablet is subdivided by radial vertical organic membranes into a varying number (2 to 50) of crystalline sectors. These sectors represent polysynthetically twinned crystal individuals which form cyclic or interpenetrant twins. The nacreous tablets in gastropods are compared with those in bivalves, and with the non-biogenic aragonite. The mechanical properties of the nacre, and the effects of the interlamellar conchiolin membranes upon the nucleation of the tablets, are discussed.     

Skeletal chemistry of Nautilus and its taxonomic significance

The strontium (Sr) and magnesium (Mg) chemistry of the shell wall and septum as well as the spherulitic-prismatic and nacreous layers of these structures was determined for Nautilus species: N. belauensis, N. macromphalus, N. pompilius and N. scrobiculatus. Each species of Nautilus exhibits greater variability and higher concentrations of Mg in juvenile portions of the shell than in more mature portions of the shell. This decrease in the variability and amount of Mg in the aragonite lattice suggests a physiochemical system which becomes more efficient with time relative to carbonate production. Statistically significant differences in the Sr and Mg content of spherulitic-prismatic and nacreous layers of the shell and septum indicate that these layers were formed from extracellular fluids of different compositions. Concentrations of Sr and Mg in aragonite of the shell wall are characteristic for each species and sufficiently invariant within species to allow species of Nautilus to be distinguished statistically on the basis of either the Sr or Mg content of the shell wall or the Mg content of septa.     

Structure and composition of the septal nacreous layer of Nautilus macromphalus L. (Mollusca, Cephalopoda)

The nacreous layer of Mollusca is the best-known aragonitic structure and is the usual model for biomineralization. However, data are based on less than 10 species. In situ observations of the septal nacreous layer of the cephalopod Nautilus shell has revealed that the tablets are composed of acicular laths. These laths are composed of round nanograins surrounded by an organic sheet. No hole has been observed in the decalcified interlamellar membranes. A set of combined analytical data shows that the organic matrices extracted from the nacreous layer are glycoproteins. In both soluble and insoluble matrices, S amino acids are rare and the soluble organic matrices have a higher sulfated sugar content than the insoluble matrices. It is possible that the observed differences in the structure and composition of the nacreous layers of the outer wall and septa of the Nautilus shell have a dual origin: evolution and functional adaptation. However, we have no appropriate data as yet to answer this question.     

Mineral bridges in nacre

We confirm with high-resolution techniques the existence of mineral bridges between superposed nacre tablets. In the towered nacre of both gastropods and the cephalopod Nautilus there are large bridges aligned along the tower axes, corresponding to gaps (150–200 nm) in the interlamellar membranes. Gaps are produced by the interaction of the nascent tablets with a surface membrane that covers the nacre compartment. In the terraced nacre of bivalves bridges associated with elongated gaps in the interlamellar membrane (>100 nm) have mainly been found at or close to the edges of superposed parental tablets. To explain this placement, we hypothesize that the interlamellar membrane breaks due to differences in osmotic pressure across it when the interlamellar space below becomes reduced at an advanced stage of calcification. In no cases are the minor connections between superimposed tablets (<60 nm), earlier reported to be mineral bridges, found to be such.     

AN ULTRASTRUCTURAL STUDY OF SPORE WALL MORPHOGENESIS IN EQUISETUM ARVENSE

Spore wall morphogenesis of Equisetum arvense was observed by transmission electron microscopy. The spore wall of E. arvense consists of four layers: intine, exine, middle layer, and elater. The exine is formed after meiosis and consists of two distinct layers. The inner portion of the exine is formed in advance of the outer layer of the exine. The middle layer is deposited after the exine. The elater can be subdivided into two distinct layers. The inner layer comprises longitudinal microfibrils that surround the spore in spiral fashion. The elater appears as thin beltlike structures at the beginning of development. Numerous microtubules were observed on the inner surface of the plasmodial plasma membrane opposite the inner layer of the elater, suggesting that these microtubules are involved with the synthesis of inner elater microfibrils. The matrix of the outer elater is formed by discharge of granules from the plasmodial cytoplasm. The intine is the last component of the sporoderm to be formed.     

Irregular calcareous sheets preserved in a conch of the Cretaceous ammonoid Hypophylloceras from Hokkaido,Japan

The mantle tissue is essential for understanding the diverse ecology and shell morphology of ammonoid cephalopods. Here, we report on irregular calcareous sheets in a well-preserved shell of a Late Cretaceous phylloceratid ammonoid Hypophylloceras subramosum from Hokkaido, Japan, and their significance for repairing the conch through the mantle inside the body chamber. The sheets are composed of nacreous layers arranged parallel to the irregularly distorted outer whorl surface. The nacreous sheets formed earlier are unevenly distributed and attached to the outer shell wall locally, whereas the last formed sheet covers a wide area of the outer shell wall. The absence of any interruption of ribbing around the irregular area suggests that these sheets were secreted inside the body chamber from the inner mantle. Gross morphological and X-ray computed tomography observations revealed that the spacing of septal formation was not affected by this event. The complex structure of the irregular sheets suggests a highly flexible mantle inside the body chamber.     

Compressional Behavior of a Mixture of Granules Containing High Load of Phyllanthus niruri Spray-Dried Extract and Granules of Adjuvants: Comparison between Eccentric and Rotary Tablet Machines

The purpose of this paper was to evaluate the compressional behavior of granules containing high load of a Phyllanthus niruri spray-dried extract in eccentric (ETM) and rotary (RTM) tablet presses. Tablets were constituted by spray-dried extract granules (SDEG, 92%), excipient granules (EXCG, 7.92%), and magnesium stearate (0.08%). SDEG was obtained by dry granulation and EXCG, composed of microcrystalline cellulose (62.9%) and sodium starch glycolate (37.1%), by wet granulation. Particle size distribution was fixed between 0.250 and 0.850 mm. Tablets did not evidence any mechanical failures, such as lamination or capping, or anomalous weight variation in either tablet machine types. Upper and lower tablet surface photomicrographs from ETM and RTM tablets showed differences in porosity and texture. Different RTM speeds suggested the visco-plastic behavior of the formulation, since, by slowing down rotation speeds, the tensile strength of the tablets increased significantly, but the porosity and disintegration time were not affected. Tablets produced in RTM showed lower friability and porosity than ETM tablets, which did not reflect on higher tensile strength. The EXCG distribution at upper and lower surfaces from ETM and RTM tablets was quantified by image analysis and evaluated through statistical methods. Spray-dried extract release was not influenced by the type of equipment or operational conditions to which the compacts were submitted. Construction and operation differences between both tablet presses influenced the final product, since tablets with similar tensile strength, made by distinct tablet machines, exhibited different quality parameters.     

Electron probe analysis of strontium in mussel (Bivalvia,Mytilidae) shells: Feasibility of estimating water temperature

Electron microprobe step-scan analyses across the inner nacreous layer of a sectionedMytilus edulis shell revealed no long-term periodic (e.g., seasonal) variation in the concentration of strontium. Similarly, no significant difference was found between a specimen sampled in February (water temperature = 1.3 °C) and one sampled in August (water temperature = 18.0 °C) with regard to the concentration of strontium within the most recently deposited aragonite. Correlation of the amount of strontium within various nacreous regions of the shells of living or fossil mytilids with water temperatures (present or past) is probably not possible through the use of an electron probe, at least to the extent that strontium variation within the nacre ofMytilus edulis is representative of that in nacreous layers of all mytilids.     

Microboring in a Freshwater Fluvial Unionid Bivalve Substrate

Samples of the unionid bivalve Elliptio complanata were collected from the channel of the freshwater Saint John River, from Fredericton, New Brunswick, Canada. Scanning electron microscopy imaging of prepared shell samples revealed an assemblage of microborings. No borings are noted on the periostracum or prismatic shell layers. Boring structures are instead confined to the underlying nacreous aragonitic shell material, together with its associated organic conchiolin layers. Three main styles of boring are encountered, encompassing both predominantly surficial structures and penetrative tubular borings. Surficial structures are represented by a polygonal network on an exposed conchiolin shell layer. The penetrative borings take two forms, one being simple unbranched tubes, steeply aligned (perpendicular to the shell surface) and traversing the full thickness of the nacreous shell layer. The other penetrative boring style, again occurring within the nacreous layer, comprises a complex irregular network of randomly oriented rarely branching tubular borings. Borings generally display diameters of micron scale. Biofilm and extracellular polymeric substances, with bacterial, diatomaceous and filamentous components are also observed, often displaying a close association with both the borings and the conchiolin layers within the shell. The formation of the borings may be attributed to cyanobacteria, cyanophyte or fungal progenitors.     

Studies onArtemisia afra Jacq.: The phloem in stem and leaf

Summary The structure of the phloem was studied in stem and leaf ofArtemisia afra Jacq., with particular attention being given to the sieve element walls. Both primary and secondary sieve elements of stem and midvein have nacreous walls, which persist in mature cells. Histochemical tests indicated that the sieve element wall layers contained some pectin. Sieve element wall layers lack lignin. Sieve elements of the minor veins (secondary and tertiary veins) lack nacreous thickening, although their walls may be relatively thick. These walls and those of contiguous transfer cells are rich in pectic substances. Transfer cell wall ingrowths are more highly developed in tertiary than in secondary veins.     

Shell structure and affinity of vermiform 'gastropods'

Vermiform ‘gastropods’ are reported from a variety of rocks ranging from Givetian to Lower Triassic age. Examples encrusting shells and plants have been identified in non-marine shales, in addition to previously recognized occurrences in shallow marine microbial bioherms and stromatolites. SEM studies of the planorbiform or trochiform protoeonch reveal a shell wall comprising three calcite layers: an outer, initial acicular layer: a blocky prismatic layer: and an inner irregular micro-lamellar layer. Minor irregularities and microstructural details suggest a high original organic content. allowing flexibility for attachment. The sinistrally coiled (or hyperstrophic dextral) calcitie teleoconch is composed of an outer simple prismatic layer and inner micro-lamellar layer comprising sheets of irregular, platy, sometimes fused calcite tablets. displaying ridges and grooves similar to those of cross-bladed fabric. Repetition of layers may occur. Regular closely-spaced punctae. passing through and disrupting the micro-lamellar layer. are unlike any mollusean tubulation. Punetation may he a shell-strengthening response to uncoiling. Septa bear a centrai, anteriorly-projecting, probebly perforate protrusion. reminiscent of the siphunele of cephalopods and similar structures in tentaculitoida. The micro-lamellar layer in the protoconch, the micro-lamellar layer with distinctive ridge and groove structure and punetation in the teleoconch, and the structure of the septa point to a close affinity between vermiform ‘gastropods’ and the Tentaculitoidea. The three-layered microstructure of the protoconch and the coiled nature of the shell distinguish vermiform ‘gastropods’ from tentaculitoids. A consideration of the shared characters indicates that the tentaculitoids and vermiform ‘gastropods’ should be regarded as a sister group to the molluses. ***Vermiform gastropods: microstructure, protoconch, teleoconch, acicular laver, prismatic laver, micro-lameller layer. cross-bladed structure. punetation, septation. Tentaculitoidea     

Morphology,ultrastructure, and development of the parasitic larva and its surrounding trophamnion of Polypodium hydriforme Ussov (Coelenterata)

Summary The larval stage of Polypodium hydriforme is planuliform and parasitic inside the growing oocytes of acipenserid fishes. The larva has inverted germ layers and a special envelope, the trophamnion, surrounding it within the host oocyte. The trophamnion is a giant unicellular provisory structure derived from the second polar body and performing both protective and digestive functions, clearly a result of adaptation to parasitism. The trophamnion displays microvilli on its inner surface, and irregular protrusions anchoring it to the yolk on its outer surface. Its cytoplasm contains long nuclear fragments, ribosomes, mitochondria, microtubules, microfilaments, prominent Golgi bodies, primary lysosomes, and secondary lysosomes with partially digested inclusions.The cells of the larva proper are poorly differentiated. No muscular, glandular, neural, interstitial, or nematocyst-forming cells have been found. The entodermal (outer layer) cells bear flagella and contain rough endoplasmic reticulum; the ectodermal (inner layer) cells lack cilia and contain an apical layer of acid mucopolysaccharid granules. The cells of both layers contain mitochondria, microtubules, and Golgi bodies; their nuclei display large nucleoli with nucleolonema-like structure, decondensed chromatin, and some perichromatin granules. At their apical rims, the ectodermal cells form septate junctions; laterally, the cells of both layers form simple contacts and occasional interdigitations. The lateral surfaces of entodermal cells are strengthened by microtubules.     

Chitosan and Enteric Polymer Based Once Daily Sustained Release Tablets of Aceclofenac: <Emphasis Type="BoldItalic">In Vitro</Emphasis> and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Studies

The purpose of this study was to develop a once daily sustained release tablet of aceclofenac using chitosan and an enteric coating polymer (hydroxypropyl methylcellulose phthalate or cellulose acetate phthalate). Overall sustained release for 24 h was achieved by preparing a double-layer tablet in which the immediate release layer was formulated for a prompt release of the drug and the sustained release layer was designed to achieve a prolonged release of drug. The preformulation studies like IR spectroscopic and differential scanning calorimetry showed the absence of drug–excipient interactions. The tablets were found within the permissible limits for various physicochemical parameters. Scanning electron microscopy was used to visualize the surface morphology of the tablets and to confirm drug release mechanisms. Good equivalence in the drug release profile was observed when drug release pattern of the tablet containing chitosan and hydroxypropyl methylcellulose phthalate (M-7) was compared with that of marketed tablet. The optimized tablets were stable at accelerated storage conditions for 6 months with respect to drug content and physical appearance. The results of pharmacokinetic studies in human volunteers showed that the optimized tablet (M-7) exhibited no difference in the in vivo drug release in comparison with marketed tablet. No significant difference between the values of pharmacokinetic parameters of M-7 and marketed tablets was observed (p > 0.05; 95% confidence intervals). However the clinical studies in large scale and, long term and extensive stability studies at different conditions are required to confirm these results.     

Identification of chitin in the prismatic layer of the shell and a chitin synthase gene from the Japanese pearl oyster, Pinctada fucata

The shell of the Japanese pearl oyster, Pinctada fucata, consists of two layers, the prismatic layer on the outside and the nacreous layer on the inside, both of which comprise calcium carbonate and organic matrices. Previous studies indicate that the nacreous organic matrix of the central layer of the framework surrounding the aragonite tablet is beta-chitin, but it remains unknown whether organic matrices in the prismatic layer contain chitin or not. In the present study, we identified chitin in the prismatic layer of the Japanese pearl oyster, Pinctada fucata, with a combination of Calcofluor White staining with IR and NMR spectral analyses. Furthermore, we cloned a cDNA encoding chitin synthase (PfCHS1) that produces chitin, contributing to the formation of the framework for calcification in the shell.     

Fabrication of Triple-Layer Matrix Tablets of Venlafaxine Hydrochloride Using Xanthan Gum

The objective of present investigation was to develop venlafaxine hydrochloride-layered tablets for obtaining sustained drug release. The tablets containing venlafaxine hydrochloride 150 mg were prepared by wet granulation technique using xanthan gum in the middle layer and barrier layers. The granules and tablets were characterized. The in vitro drug dissolution study was conducted in distilled water. The tablets containing two lower strengths were also developed using the same percentage composition of the middle layer. Kinetics of drug release was studied. The optimized batches were tested for water uptake study. Radar diagrams are provided to compare the performance of formulated tablets with the reference products, Effexor XR capsules. The granules ready for compression exhibited good flow and compressibility when xanthan gum was used in the intragranular and extragranular fractions. Monolayer tablets failed to give the release pattern similar to that of the reference product. The drug release was best explained by Weibull model. A unified Weibull equation was evolved to express drug release from the formulated tablets. Lactose facilitated drug release from barrier layers. Substantial water uptake and gelling of xanthan gum appears to be responsible for sustained drug release. The present study underlines the importance of formulation factors in achieving same drug release pattern from three strengths of venlafaxine hydrochloride tablets.     

Controlled-Release Carbamazepine Granules and Tablets Comprising Lipophilic and Hydrophilic Matrix Components

The objective of this study was to investigate the effect of lipophilic (Compritol 888 ATO) and hydrophilic components (combination of HPMC and Avicel) on the release of carbamazepine from granules and corresponding tablet. Wet granulation followed by compression was employed for preparation of granules and tablets. The matrix swelling behavior was investigated. The dissolution profiles of each formulation were compared to those of Tegretol CR tablets and the mean dissolution time (MDT), dissolution efficiency (DE %) and similarity factor (f(2) factor) were calculated. It was found that increase in the concentration of HPMC results in reduction in the release rate from granules and achievement of zero-order is difficult from the granules. The amount of HPMC plays a dominant role for the drug release. The release mechanism of CBZ from matrix tablet formulations follows non-Fickian diffusion shifting to case II by the increase of HPMC content, indicating significant contribution of erosion. Increasing in drug loading resulted in acceleration of the drug release and in anomalous controlled-release mechanism due to delayed hydration of the tablets. These results suggest that wet granulation followed by compression could be a suitable method to formulate sustained release CBZ tablets.     

Electrokinetic Properties of the Sarcoplasmic Reticulum Membrane Obtained from Reconstitution Studies

Electrophoretic mobility data of SR vesicles reconstituted with uncharged and two mixtures of charged and uncharged lipids (Brethes, D., Dulon, D., Johannin, G., Arrio, B., Gulik-Krzywicki, T., Chevallier, J. 1986. Study of the electrokinetic properties of reconstituted sarcoplasmic reticulum vesicles. Arch. Biochem. Biophys. 246:355–356) were analyzed in terms of four models of the membrane-water interface: (I) a smooth, negatively charged surface; (II) a negatively charged surface of lipid bilayer covered with an electrically neutral surface frictional layer; (III) an electrically neutral lipid bilayer covered with a neutral frictional layer containing a sheet of negative charge at some distance above the surface of the bilayer; (IV) an electrically neutral lipid bilayer covered with a homogeneously charged frictional layer. The electrophoretic mobility was predicted from the numerical integration of Poisson-Boltzmann and Navier-Stokes equations. Experimental results were consistent only with predictions based on Model-III with charged sheet about 4 nm above the bilayer and frictional layer about 10 nm thick. Assuming that the charge of the SR membrane is solely due to that on Ca⁺⁺-ATPase pumps, the dominant SR protein, the mobility data of SR and reconstituted SR vesicles are consistent with 12 electron charges/ATPase. This value compares well to the net charge of the cytoplasmic portion of ATPase estimated from the amino acid sequence (-11e). The position of the charged sheet suggests that the charge on the ATPase is concentrated in the middle of the cytoplasmic portion. The frictional layer of SR can be also assigned to the cytoplasmic portion of Ca⁺⁺-ATPase. The layer has been characterized with hydrodynamic shielding length of 1.1 nm. Its thickness is comparable to the height of the cytoplasmic portion of Ca⁺⁺-ATPase. Received: 15 June 1998/Revised: 8 October 1998