Comparison of surface electromyography and myotonometric measurements during voluntary isometric contractions

Objectives: Muscle stiffness increases during muscle contraction. The purpose of this study was to determine the strength of the correlation between myotonometric measurements of muscle stiffness and surface electromyography (sEMG) measurements during various levels of voluntary isometric contractions of the biceps brachii muscle. Subjects: Eight subjects (four female; four male), with mean age of 30.6±8.23 years, volunteered to participate in this study. Methods: Myotonometer and sEMG measurements were taken simultaneously from the right biceps brachii muscle. Data were obtained: (1) at rest, (2) while the subject held a 15 lb (6.8 kg) weight isometrically and, (3) during a maximal voluntary isometric contraction. Myotonometer force–displacement curves (amount of tissue displacement to a given unit of force applied perpendicular to the muscle) were compared with sEMG measurements using Pearson’s product–moment correlation coefficients. Results: Myotonometer and sEMG measurement correlations ranged from −0.70 to −0.90. The strongest correlations to sEMG were from Myotonometer force measurements between 1.00 and 2.00 kg. Conclusions: Myotonometer and sEMG measurements were highly correlated. Tissue stiffness, as measured by the Myotonometer, appears capable of assessing changes in muscle activation levels.     

Mechanomyography and electromyography force relationships during concentric, isometric and eccentric contractions.

The purpose of this study was to investigate systematically if complementary knowledge could be obtained from the recordings of electromyography (EMG) and mechanomyography (MMG) signals. EMG and MMG activities were recorded from the first dorsal interosseous muscle during slow concentric, isometric, and eccentric contraction at 0, 25, 50, 75 and 100% of the maximal voluntary contraction (MVC). The combination of the EMG and MMG recordings during voluntary concentric-isometric-eccentric contraction showed significant different non-linear EMG/force and MMG/force relationships (P<0.001). The EMG root mean square (rms) values increased significantly from 0 to 50% MVC during concentric and isometric contraction and up to 75% MVC during eccentric contraction (P<0.05). The MMG rms values increased significantly from 0 to 50% MVC during concentric contraction (P<0.05). The non-linear relationships depended mainly on the type and the level of contraction together with the angular velocity. Furthermore, the type of contraction, the contraction level, and the angular velocity influenced the electromechanical efficiency evaluated as the MMG to EMG ratio (P<0.05). These results highlight that EMG and MMG provide complementary information about the electrical and mechanical activity of the muscle. Different activation strategies seem to be used during graded isometric and anisometric contraction.     

Cardiac responses to maximal anisotonic isometric contractions during handgrip and leg extension

A group of 14-healthy men performed anisotonic isometric contractions (AIC), for 60 s, at an intensity of 100% maximal voluntary contraction force (MVC) during handgrip (HG) and leg extension (LE). Heart rate (f _c), stroke volume index (SVI) and cardiac output index (Q_cI) were measured during the last 10 s of both AIC by an impedance reography method. Force (F) exerted by the subjects was recorded continuously and reported as a relative force (F _r) (% MVC). The F generated during MVC was greater for LE than for HG (502.I N compared to 374.6 N, P < 0.001). The rate of decrease in F _r was significantly slower for LE than HG for the first 25 s of the exercise (phase 1 of AIC). The F _r developed by the subjects at the end of AIC was 40% MVC for both LE and HG. The increase in f _c was greater for LE (63 beats · min^–1) than for HG (52 beats · min^–1), P < 0.01. The SVI decreased significantly from the resting level by 17.0 ml · m^–2 and by 18.2 ml · m^–2 for LE and HG, respectively. The Q_cI increased insignificantly for HG by 0.091 · min^–1 · m^–2 andsignificantly forLE by 0.561 · min^–1 · m^–2 (P < 0.001). It was concluded that although both AIC caused a significant decrease in SVI, greater increases in f _c and Q_c were observed for LE than for HG. The greater f _c and Q_c reported during LE was probably related to the greater relative force exerted by LE during phase 1 of AIC. It seems, therefore that central command might have dominated for phase 1 of AIC but that the muscle reflex also contributed significantly to the control of the cardiac response to the high intensity AIC.     

Functional subdivision of the upper trapezius muscle during maximal isometric contractions

The electromyographic (EMG) activity pattern across the upper trapezius of 22 healthy subjects was investigated during maximal isometric contractions. Eight bipolar surface electrodes with 10 mm distance between adjacent electrode pairs were placed on a line from the clavicle to the scapula. At the region near the clavicle the highest EMG amplitudes were recorded during 90 ° arm abduction. At the more posterior parts the highest amplitudes were found both during arm abduction and shoulder elevation. A double differential recording technique which reduced the EMG cross-talk contribution supported the finding that the upper trapezius was differently activated when the arm posture was changed. The normalized EMG amplitude-force relationship during the shoulder elevation showed a curvilinear relationship on the anterior part of the upper trapezius with a slower increase in EMG amplitude than force at low force. The slope of the curve, at low force, increased gradually in the posterior direction on the upper trapezius. The EMG activity patterns across the upper trapezius indicate a flexibility in motor activation which maybe reflects a functional optimization of the contractions performed by this muscle.     

Muscle performance during maximal isometric and dynamic contractions is influenced by the stiffness of the tendinous structures.

Contractile force is transmitted to the skeleton through tendons and aponeuroses, and, although it is appreciated that the mechanocharacteristics of these tissues play an important role for movement performance with respect to energy storage, the association between tendon mechanical properties and the contractile muscle output during high-force movement tasks remains elusive. The purpose of the study was to investigate the relation between the mechanical properties of the connective tissue and muscle performance in maximal isometric and dynamic muscle actions. Sixteen trained men participated in the study. The mechanical properties of the vastus lateralis tendon-aponeurosis complex were assessed by ultrasonography. Maximal isometric knee extensor force and rate of torque development (RTD) were determined. Dynamic performance was assessed by maximal squat jumps and countermovement jumps on a force plate. From the vertical ground reaction force, maximal jump height, jump power, and force-/velocity-related determinants of jump performance were obtained. RTD was positively related to the stiffness of the tendinous structures (r = 0.55, P < 0.05), indicating that tendon mechanical properties may account for up to 30% of the variance in RTD. A correlation was observed between stiffness and maximal jump height in squat jumps and countermovement jumps (r = 0.64, P < 0.05 and r = 0.55, P < 0.05). Power, force, and velocity parameters obtained during the jumps were significantly correlated to tendon stiffness. These data indicate that muscle output in high-force isometric and dynamic muscle actions is positively related to the stiffness of the tendinous structures, possibly by means of a more effective force transmission from the contractile elements to the bone.     

Fatigue responses of human triceps surae muscles during repetitive maximal isometric contractions.

Nine healthy men (22-45 yr) completed 100 repetitive maximal isometric contractions of the ankle plantar flexor muscles in two knee positions of full extension (K0) and flexion at 90 degrees (K90), positions that varied the contribution of the gastrocnemii. Electromyographic activity was recorded from the medial and lateral gastrocnemii and soleus muscles by using surface electrodes. Plantar flexion torque in K0 was greater and decreased more rapidly than in K90. The electromyographic amplitude decreased over time, and there were no significant differences between muscles and knee joint positions. The level of voluntary effort, assessed by a supramaximal electrical stimulation during every 10th contraction, decreased from 96 to 70% (P < 0.05) with no difference between K0 and K90. It was suggested that a decrease in plantar flexion torque was attributable to both central and peripheral fatigue and that greater fatigability in K0 than in K90 would result from a greater contribution and hence more pronounced fatigue of the gastrocnemius muscle. Further support for this possibility was provided from changes in twitch torque.     

Electromechanical delay in the vastus lateralis muscle during dynamic isometric contractions

Electromechanical delay (EMD) values were obtained using a cross-correlation technique for a series of 14 repetitive submaximal dynamic isometric contractions of the vastus lateralis performed by five subjects. To avoid a phase lag, which is introduced with one-way filtering, the EMG was processed with a bi-directional application of a second-order Butterworth filter. A mean EMD value of 86 ms (SD = 5.1 ms) was found. Moreover, contraction and relaxation delays were computed and compared. There was a significant difference between the contraction and relaxation delays (P less than 0.005). The mean contraction delay was 81.9 ms and the mean relaxation delay was 88.8 ms. Despite this significant difference, the computed contraction and relaxation delay values lie in the same range as the total phase lag, calculated with the cross-correlation technique. The magnitude of EMD values found supports the need to account for this delay when interpreting temporal aspects of patterns of intermuscular coordination.     

Effect of vibration during fatiguing resistance exercise on subsequent muscle activity during maximal voluntary isometric contractions

This investigation was designed to determine if vibration during fatiguing resistance exercise would alter associated patterns of muscle activity. A cross-over design was employed with 8 subjects completing a resistance exercise bout once with a vibrating dumbbell (V) (44 Hz, 3 mm displacement) and once without vibration (NV). For both exercise bouts, 10 sets were performed with a load that induced concentric muscle failure during the 10th repetition. The appropriate load for each set was determined during a pretest. Each testing session was separated by 1 week. Electromyography (EMG) was obtained from the biceps brachii muscle at 12 different time points during a maximum voluntary contraction (MVC) at a 170 degrees elbow angle after each set of the dumbbell exercise. The time points were as follows: pre (5 minutes before the resistance exercise bout), T1-T10 (immediately following each set of resistance exercise), and post (15 minutes after the resistance exercise bout). EMG was analyzed for median power frequency (MPF) and maximum (mEMG). NV resulted in a significant decrease in MPF at T1-T4 (p < or 0.05) and a significant increase in mEMG at T2 during the MVC. V had an overall trend of lower mEMG in comparison to NV. The mEMG and MPF values associated with NV were similar to previously reported investigations. The lower mEMG values and the higher MPF of V in comparison to NV are undocumented. The EMG patterns observed with vibration may indicate a more efficient and effective recruitment of high threshold motor units during fatiguing contractions. This may indicate the usage of vibration with resistance exercise as an effective tool for strength training athletes.     

Cardiovascular responses to sustained maximal isometric contractions of the finger flexors

This study investigated cardiovascular responses to 2 min sustained submaximal (20% MVC) and maximal (100% MVC) voluntary isometric contractions of the finger flexors in healthy young women. Cardiovascular variables investigated were: heart rate (f _c), mean arterial pressure ( _a), and stroke volume (SV). Doppler echocardiography was used to estimate SV from measures of aortic diameter (AD) and time-velocity integrals. Preliminary studies indicated that AD did not change significantly after 2 min sustained 100% MVC. Therefore, pre-exercise AD values were used to calculate SV before, during and after exercise. During the 2-min 100% MVC period, f _c and _aincreased significantly during the first 30 s of contraction. f _c then remained constant during the remainder of the 2-min contraction period, while _acontinued to rise. SV did not change significantly during the 100% MVC task but increased significantly during recovery from sustained 100% MVC. The data suggest that the magnitude of cardiovascular responses to isometric exercise is dependent on the specific task performed, and that there is a different pattern of response for f _c, _a, and SV during 20% and 100% MVC tasks. Unlike f _c and _a, SV did not change significantly during isometric exercise, but increased significantly after sustained 100% MVC.     

Between-day reliability of a hand-held dynamometer and surface electromyography recordings during isometric submaximal contractions in different shoulder positions

Functional shoulder assessments require the use of objective and reliable standardized outcome measures. Therefore, the aim of this study was to examine the between-day reliability of a hand-held dynamometer when measuring muscle strength during flexion, abduction, and internal and external rotation as well as surface electromyography (EMG) when measuring muscle activity from m. trapezius superior and deltoideus anterior. Twenty-four healthy subjects participated and performed four isometric contractions measured with a hand-held dynamometer and EMG. Both relative and absolute reliability were calculated based on the mean of the last three of the four repetitions. EMG amplitude was assessed calculating both absolute and normalized root-mean-square (RMS) values. The reliability of the hand-held dynamometer was high (LOA = 3.2–7.6% and ICC = 0.89–0.98). The absolute reliability for EMG showed similar results for absolute RMS values (LOA = 20.0–68.4%) and normalized RMS values (LOA = 42.4–66.5%). However, the results concerning the relative reliability showed higher ICC for absolute RMS values (ICC = 0.82–0.92) compared with normalized values (ICC = 0.57–0.72).The outcome measurements of this study with healthy subjects were found reliable and, therefore, have the potential to detect changes in muscle strength and muscle activity.     

Surface EMG signal processing during isometric contractions

This paper provides an overview of techniques suitable for the estimation, interpretation and understanding of time variations that affect the surface electromyographic (EMG) signal during sustained voluntary or electrically elicited contractions. These variations concern amplitude variables, spectral variables and muscle fiber conduction velocity, are interdependent and are referred to as the ‘fatigue plot'. The fatigue plot provides information suitable for the classification of muscle behavior. In addition, the information obtainable by means of linear electrode arrays is discussed, and applications of mathematical models for the interpretation of array signals are presented. The model approach provides additional ways for the classification of muscle behavior.     

Motor unit recruitment during prolonged isometric contractions

Motor unit recruitment patterns were studied during prolonged isometric contraction using fine wire electrodes. Single motor unit potentials were recorded from the brachial biceps muscle of eight male subjects, during isometric endurance experiments conducted at relative workloads corresponding to 10% and 40% of maximal voluntary contraction (MVC), respectively. The recordings from the 10% MVC experiment demonstrated a characteristic time-dependent recruitment. As the contraction progressed both the mean number of motor unit spikes counted and the mean amplitude of the spikes increased significantly (P<0.01). This progressive increase in spike activity was the result of a discontinuous process with periods of increasing and decreasing activity. The phenomenon in which newly recruited motor units replace previously active units is termed motor unit rotation and appeared to be an important characteristic of motor control during a prolonged low level contraction. In contrast to the 10% MVC experiment, there was no indication of de novo recruitment in the 40% MVC experiment. Near the point of exhaustion a marked change in action potential shape and duration dominated the recordings. These findings demonstrate a conspicuous difference in the patterns of motor unit recruitment during a 10% and a 40% MVC sustained contraction. It is suggested that there is a close relationship between intrinsic muscle properties and central nervous system recruitment strategies which is entirely different in fatiguing high and low level isometric contractions.     

Fatigue effect on cross-talk in mechanomyography signals of extensor and flexor forearm muscles during maximal voluntary isometric contractions

Objective:This paper presents the analyses of the fatigue effect on the cross-talk in mechanomyography (MMG) signals of extensor and flexor forearm muscles during pre- and post-fatigue maximum voluntary isometric contraction (MVIC).Methods:Twenty male participants performed repetitive submaximal (60% MVIC) grip muscle contractions to induce muscle fatigue and the results were analyzed during the pre- and post-fatigue MVIC. MMG signals were recorded on the extensor digitorum (ED), extensor carpi radialis longus (ECRL), flexor digitorum superficialis (FDS) and flexor carpi radialis (FCR) muscles. The cross-correlation coefficient was used to quantify the cross-talk values in forearm muscle pairs (MP1, MP2, MP3, MP4, MP5 and MP6). In addition, the MMG RMS and MMG MPF were calculated to determine force production and muscle fatigue level, respectively.Results:The fatigue effect significantly increased the cross-talk values in forearm muscle pairs except for MP2 and MP6. While the MMG RMS and MMG MPF significantly decreased (p<0.05) based on the examination of the mean differences from pre- and post-fatigue MVIC.Conclusion:The presented results can be used as a reference for further investigation of cross-talk on the fatigue assessment of extensor and flexor muscles’ mechanic.     

Obtaining maximum muscle excitation for normalizing shoulder electromyography in dynamic contractions

Muscle specific maximal voluntary isometric contractions (MVIC) are commonly used to elicit reference amplitudes to normalize electromyographic signals (EMG). It has been questioned whether this is appropriate for normalizing EMG from dynamic contractions. This study compares EMG amplitude when shoulder muscle activity from dynamic contractions is normalized to isometric and isokinetic maximal excitation as well as a hybrid approach currently used in our laboratory. Anterior, middle and posterior deltoid, upper and lower trapezius, pectoralis major, latissimus dorsi and infraspinatus were monitored during (1) manually resisted MVICs, and (2) maximum voluntary dynamic concentric contractions (MVDC) on an isokinetic dynamometer. Dynamic contractions were performed (a) at 30°/s about the longitudinal, frontal and sagittal axes of the shoulder, and (b) during manual bi-rotation of a tilted wheel at 120°/s. EMG from the wheel task was normalized to the maximum excitation from (i) the muscle specific MVIC, (ii) from any MVIC (MVIC_ALL), (iii) for any MVDC, (iv) from any exertion (maximum experimental excitation, MEE). Mean EMG from the wheel task was up to 45% greater when normalized to muscle specific isometric contractions (method i) than when normalized to MEE (method iv). Seventy-five percent of MEE’s occurred during MVDCs. This study presents an 20 useful and effective process for obtaining the greatest excitation from the shoulder muscles when normalizing dynamic efforts.     

Model of the electromyographic activity during brief isometric contractions

EMG's of short isometric contractions are analysed. Mathematical expressions are derived for the average EMG and for the variance of the EMG. The result shows that by deconvolution methods a distribution of motor unit onset time during contraction can be obtained once the mean motor unit potential is known. A further result of the analysis is the fact that by simulation methods a statistic can be derived to estimate the mean number of active motor units covered by the electrodes. The fact that highly variable EMG's go along with very accurately timed movements is shortly discussed.     

Sarcomere dynamics in skeletal muscle myofibrils during isometric contractions

The main goal of this study was to evaluate the dynamics of sarcomeres during isometric activation of skeletal muscle myofibrils. Rabbit psoas myofibrils (n=14) were attached between a pair of cantilevers for force measurements at one side and a rigid glass needle at the other side, and their images were used for measurements of individual sarcomere lengths (SL) during contractions. Myofibrils were set at average SL between 2.13 and 3.06 μm, and were activated and held isometric for 20–35 s during which SL and force were continuously measured. SL dispersion increased from the rest state to activation, but it remained mostly constant during the activation period. Even with the length non-uniformity developed during myofibril activation, most sarcomeres stabilized their length changes during the isometric contraction. As a result, sarcomeres contracted at different degrees of filament overlap while producing similar forces. When the myofibrils were separated in two groups that produced force at averaged short (≤2.5 μm) or long (≥2.5 μm) SL, the initial non-uniformity was greater in long lengths, but changes observed in sarcomeres during the activation period were similar, suggesting that sarcomere stability is not length-dependent.     

Reliability of EMG measurements for trunk muscles during maximal and sub-maximal voluntary isometric contractions in healthy controls and CLBP patients.

The purpose of this study was to compare the reliability of trunk muscle activity measured by means of surface electromyography (EMG) during maximal and sub-maximal voluntary isometric contractions (MVC/sub-MVC) over repeated trials within-day and between-days in healthy controls and patients with chronic low back pain (CLBP). Eleven volunteers (six controls and five CLBP patients) were assessed twice with a 1-week interval. Surface EMG signals were recorded bilaterally from six trunk muscles. Intra-class correlation coefficients (ICC) and standard error of measurement as a percentage of the grand mean (%SEM) were calculated. MVC and sub-MVC showed excellent within-day reliability in both healthy controls and CLBP patients (ICC mean 0.91; range 0.75-0.98; %SEM mean 4%; range 1-12%). Sub-MVC for both groups between-days showed excellent reliability (ICC mean 0.88; range 0.78-0.97; %SEM mean 7%; range 3-11%). The between-days MVC for both groups showed trends towards lower levels of reliability (ICC mean 0.70; range 0.19-0.99; %SEM mean 17%; range 4-36%) when compared to sub-MVC. Findings of the study provide evidence that sub-MVC are preferable for amplitude normalisation when assessing EMG signals of trunk muscles between-days.