Muscle performance during maximal isometric and dynamic contractions is influenced by the stiffness of the tendinous structures.

Contractile force is transmitted to the skeleton through tendons and aponeuroses, and, although it is appreciated that the mechanocharacteristics of these tissues play an important role for movement performance with respect to energy storage, the association between tendon mechanical properties and the contractile muscle output during high-force movement tasks remains elusive. The purpose of the study was to investigate the relation between the mechanical properties of the connective tissue and muscle performance in maximal isometric and dynamic muscle actions. Sixteen trained men participated in the study. The mechanical properties of the vastus lateralis tendon-aponeurosis complex were assessed by ultrasonography. Maximal isometric knee extensor force and rate of torque development (RTD) were determined. Dynamic performance was assessed by maximal squat jumps and countermovement jumps on a force plate. From the vertical ground reaction force, maximal jump height, jump power, and force-/velocity-related determinants of jump performance were obtained. RTD was positively related to the stiffness of the tendinous structures (r = 0.55, P < 0.05), indicating that tendon mechanical properties may account for up to 30% of the variance in RTD. A correlation was observed between stiffness and maximal jump height in squat jumps and countermovement jumps (r = 0.64, P < 0.05 and r = 0.55, P < 0.05). Power, force, and velocity parameters obtained during the jumps were significantly correlated to tendon stiffness. These data indicate that muscle output in high-force isometric and dynamic muscle actions is positively related to the stiffness of the tendinous structures, possibly by means of a more effective force transmission from the contractile elements to the bone.     

Relative net vertical impulse determines jumping performance

The purpose of this investigation was to determine the relationship between relative net vertical impulse and jump height in a countermovement jump and static jump performed to varying squat depths. Ten college-aged males with 2 years of jumping experience participated in this investigation (age: 23.3 ± 1.5 years; height: 176.7 ± 4.5 cm; body mass: 84.4 ± 10.1 kg). Subjects performed a series of static jumps and countermovement jumps in a randomized fashion to a depth of 0.15, 0.30, 0.45, 0.60, and 0.75 m and a self-selected depth (static jump depth = 0.38 ± 0.08 m, countermovement jump depth = 0.49 ± 0.06 m). During the concentric phase of each jump, peak force, peak velocity, peak power, jump height, and net vertical impulse were recorded and analyzed. Net vertical impulse was divided by body mass to produce relative net vertical impulse. Increasing squat depth corresponded to a decrease in peak force and an increase in jump height and relative net vertical impulse for both static jump and countermovement jump. Across all depths, relative net vertical impulse was statistically significantly correlated to jump height in the static jump (r = .9337, p < .0001, power = 1.000) and countermovement jump (r = .925, p < .0001, power = 1.000). Across all depths, peak force was negatively correlated to jump height in the static jump (r = -0.3947, p = .0018, power = 0.8831) and countermovement jump (r = -0.4080, p = .0012, power = 0.9050). These results indicate that relative net vertical impulse can be used to assess vertical jump performance, regardless of initial squat depth, and that peak force may not be the best measure to assess vertical jump performance.     

The reliability of jump kinematics and kinetics in children of different maturity status

The purpose of this study was to determine the reliability of eccentric (ECC) and concentric (CON) kinematic and kinetic variables thought to be critical to jump performance during bilateral vertical countermovement jump (VCMJ) and horizontal countermovement jump (HCMJ) across children of different maturity status. Forty-two athletic male and female participants between 9 and 16 years of age were divided into 3 maturity groups according to peak height velocity (PHV) offset (Post-PHV, At-PHV, and Pre-PHV) and percent of predicted adult stature. All the participants performed 3 VCMJ and HCMJ trials and the kinematics, and kinetics of these jumps were measured via a force plate over 3 testing sessions. In both jumps, vertical CON mean and peak power and jump height or distance were the most reliable measures across all groups (change in the mean [CM] = -5.4 to 6.2%; coefficient of variation [CV] = 2.1-9.4%; Intraclass correlation coefficient [ICC] = 0.82-0.98), whereas vertical ECC mean power was the only ECC variable with acceptable reliability for both jumps (CM = -0.7 to 10.1%; CV = 5.2-15.6%; ICC = 0.74-0.97). A less mature state was "likely" to "very likely" to reduce the reliability of the HCMJ ECC kinetics and kinematics. These findings suggested that movement variability is associated with the ECC phase of CMJs, especially in Pre-PHV during the HCMJ. Vertical CON mean and peak power and ECC mean power were deemed reliable and appropriate to be used in children as indicators of jump and stretch-shortening cycle performance.     

Strength and power predictors of sports speed

For many sporting activities, initial speed rather than maximal speed would be considered of greater importance to successful performance. The purpose of this study was to identify the relationship between strength and power and measures of first-step quickness (5-m time), acceleration (10-m time), and maximal speed (30-m time). The maximal strength (3 repetition maximum [3RM]), power (30-kg jump squat, countermovement, and drop jumps), isokinetic strength measures (hamstring and quadriceps peak torques and ratios at 60 degrees .s(-1) and 300 degrees .s(-1)) and 5-m, 10-m, and 30-m sprint times of 26 part-time and full-time professional rugby league players (age 23.2 +/- 3.3 years) were measured. To examine the importance of the strength and power measures on sprint performance, a correlational approach and a comparison between means of the fastest and slowest players was used. The correlations between the 3RM, drop jump, isokinetic strength measures, and the 3 measures of sport speed were nonsignificant. Correlations between the jump squat (height and relative power output) and countermovement jump height and the 3 speed measures were significant (r = -0.43 to -0.66, p < 0.05). The squat and countermovement jump heights as well as squat jump relative power output were the only variables found to be significantly greater in the fast players. It was suggested that improving the power to weight ratio as well as plyometric training involving countermovement and loaded jump-squat training may be more effective for enhancing sport speed in elite players.     

Occurrence of fatigue during sets of static squat jumps performed at a variety of loads

Research has identified that the optimal power load for static squat jumps (with no countermovement) is lower than the loads usually recommended for power training. Lower loads may permit the performance of additional repetitions before the onset of fatigue compared with heavier loads; therefore, the aim of this study was to determine the point of fatigue during squat jumps at various loads (0, 20, 40, 60% 1-repetition maximum [1RM]). Seventeen professional rugby league players performed sets of 6 squat jumps (with no countermovement), using 4 loading conditions (0, 20, 40, and 60% of 1RM back squat). Repeated measures analysis of variance revealed no significant differences (p > 0.05) in force, velocity, power, and displacement between repetitions, for the 0, 20, and 40% loading conditions. The 60% condition showed no significant difference (p > 0.05) in peak force between repetitions; however, velocity (1.12 + 0.10 and 1.18 + 0.11 m·s(-1)), power (3,385 + 343 and 3,617 + 396 W) and displacement (11.13 + 2.31 and 11.85 + 2.16 cm) were significantly (p < 0.02) lower during repetition 6 compared with repetition 2. These findings indicate that when performing squat jumps (with no countermovement) with a load <40% 1RM back squat, up to >6 repetitions can be completed without inducing fatigue and a minimum of 4-6 repetitions should be performed to achieve peak power output. When performing squat jumps (with no countermovement) with a load equal to the 60% 1RM only, 5 repetitions should be performed to minimize fatigue and ensure maintenance of velocity and power.     

The influence of familiarization on the reliability of force variables measured during unloaded and loaded vertical jumps

The purpose of this study was to determine the number of familiarization sessions required to obtain an accurate measure of reliability associated with force variables recorded during unloaded and loaded (30 and 60% of 1 repetition maximum squat [1RM]) static vertical jumps (SJ). Nine physically active men attended 4 separate testing sessions over a 2-week period. Force platform recordings of peak force, peak rate of force development (pRFD), average rate of force development, takeoff velocity, average power, and peak power were obtained for each jump. During each of the 4 testing sessions, 3 jumps were performed under each of the load conditions. The average of the force variables were used in the analysis. Familiarization was assessed using the scores obtained during the 4 separate testing sessions. Reliability was assessed by calculating intraclass correlation coefficients (ICCs) and coefficient of variation (CV) associated with the force variables. No significant differences (p > 0.05) were obtained between the testing sessions for any of the force variables. With the exception of pRFD, the force variables showed reasonably good levels of test-retest reliability (ICC range: 0.75-0.99; CV range: 1.2-7.6%). High levels of reliability can be achieved in a variety of force variables without the need for familiarization sessions when performing SJ under unloaded conditions and with loads of 30 and 60% of 1RM squat with physically active men.     

Effects of 6 weeks of periodized squat training with or without whole-body vibration on short-term adaptations in jump performance within recreationally resistance trained men

The purpose of this study was to examine the effects of a 6-week, periodized squat training program, with or without whole-body low-frequency vibration (WBLFV), on jump performance. Males ranged in age from 20 to 30 years and were randomized into groups that did squat training with (SQTV, n = 13) or without (SQT, n = 11) vibration, or a control group (CG, n = 6). Measures of jump height (cm), peak power (Pmax), Pmax per kilogram of body mass (Pmax/kg), and mean power were recorded during 30-cm depth jumps and 20-kg squat jumps at weeks 1 (pretraining), 3 (midtraining), and 7 (posttraining). No significant group differences were seen for 30-cm depth jump height between weeks 1 and 7 (p > 0.05). Trial three (W7) measures were greater than those for trial two (W3) and trial one (W1) (p < 0.05). Significant group differences were seen for 20-kg squat jump height, with SQTV > SQT between weeks 1 and 7 (p < 0.05). Significant trial differences were seen, with W7 > W3 > W1 (p < 0.05) as well as for 30-cm depth jump Pmax percent change (W7 > W3 and W1 p < 0.05)). A significant trial effect was seen for 20-kg squat jump Pmax (W7 > W1, p < 0.05) and 20-kg squat jump Pmax/kg percent change (W7 > W3 > W1, p < 0.05). The addition of vibration to SQTV seemed to facilitate Pmax and mean power adaptation for depth jumps and Pmax for squat jumps, although not significantly (p > 0.05). Stretch reflex potentiation and increased motor unit synchronization and firing rates may account for the trends seen. Baseline squat strength, resistance training experience, and amplitude, frequency, and duration of application of WBLFV seem to be important factors that need to be controlled for.     

Relationship between countermovement jump performance and multijoint isometric and dynamic tests of strength

The purpose of this investigation was to determine the relationship between countermovement vertical jump (CMJ) performance and various methods used to assess isometric and dynamic multijoint strength. Twelve NCAA Division I-AA male football and track and field athletes (age, 19.83 +/- 1.40 years; height, 179.10 +/- 4.56 cm; mass, 90.08 +/- 14.81 kg; percentage of body fat, 11.85 +/- 5.47%) participated in 2 testing sessions. The first session involved 1 repetition maximum (1RM) (kg) testing in the squat and power clean. During the second session, peak force (N), relative peak force (N x kg(-1)), peak power (W), relative peak power (W x kg(-1)), peak velocity (m x s(-1)), and jump height (meters) in a CMJ, and peak force and rate of force development (RFD) (N x s(-1)) in a maximal isometric squat (ISO squat) and maximal isometric mid-thigh pull (ISO mid-thigh) were assessed. Significant correlations (P < or = 0.05) were found when comparing relative 1RMs (1RM/body mass), in both the squat and power clean, to relative CMJ peak power, CMJ peak velocity, and CMJ height. No significant correlations existed between the 4 measures of absolute strength, which did not account for body mass (squat 1RM, power clean 1RM, ISO squat peak force, and ISO mid-thigh peak force) when compared to CMJ peak velocity and CMJ height. In conclusion, multijoint dynamic tests of strength (squat 1RM and power clean 1RM), expressed relative to body mass, are most closely correlated with CMJ performance. These results suggest that increasing maximal strength relative to body mass can improve performance in explosive lower body movements. The squat and power clean, used in a concurrent strength and power training program, are recommended for optimizing lower body power.     

Acute effects of augmented eccentric loading on jump squat performance

The purpose of this study was to determine the acute effects of a spectrum of eccentric loads on force, velocity, and power during the concentric portion of maximal-effort jump squats utilizing a repeated measures design. Thirteen resistance-trained men (age = 22.8 +/- 2.9 years, weight = 87.1 +/- 11.8 kg, 163.5 +/- 28.6 kg squat 1 repetition maximum [1RM]; mean +/- SD), who routinely incorporated back squats into their training, participated as subjects in this investigation. Jump squat performance was assessed using 4 experimental conditions. The first of these conditions consisted of an isoinertial load equal to 30% of back squat 1RM. The remaining conditions consisted of jump squats with a concentric load of 30% 1RM, subsequent to the application of experimental augmented eccentric loading (AEL) conditions of 20, 50, and 80% of back squat 1RM, respectively. All subjects performed 2 sets of 1RM of maximum-effort jump squats with all experimental conditions in a counter-balanced sequence. Forty-eight hours after completing the first testing session, subjects repeated the experimental testing protocol to establish stability reliability. Peak performance values for the reliable variables of force, velocity, and power, as well as force and power values obtained at 20-ms intervals during the initial 400 ms of the concentric jump squat range of motion, showed no statistical difference (p > 0.05) across the experimental AEL loads. These results suggest that load-spectrum AEL prior to a 30% 1RM jump squat fails to acutely enhance force, velocity, and power.     

Power and maximum strength relationships during performance of dynamic and static weighted jumps

The purpose of this study was to investigate the relationship of the 1 repetition maximum (1RM) squat to power output during countermovement and static weighted vertical squat jumps. The training experience of subjects (N = 22, 87.0 +/- 15.3 kg, 14.1 +/- 7.1% fat, 22.2 +/- 3.8 years) ranged from 7 weeks to 15+ years. Based on the 1RM squat, subjects were further divided into the 5 strongest and 5 weakest subjects (p 相似文献   

Effect of forward trunk inclination on joint power output in vertical jumping

It is commonly accepted that vertical jump performance is a good indicator of maximal joint power. Some studies, however, have indicated that knee joint power output in the vertical jump is limited due to forward trunk inclination early in the push-off. The aim of this experimental study was to investigate the effect of forward trunk inclination on joint power output in vertical jumping. A group of 20 male subjects performed maximal vertical countermovement jumps from stance while minimizing the contribution of arm swing by holding their hands on their hips (arms akimbo). They also performed maximal jumps while holding the trunk as upright as possible throughout the jump, still holding the arms akimbo. Jump height, joint kinematics (angles), and joint kinetics (torque, power) were calculated. Jump height of vertical jumps while holding the trunk upright was 10% less than in normal jumps. Hip joint power was decreased by 37% while knee joint power was increased by 13%. Ankle joint power did not change. These results demonstrated that maximal jump performance does not necessarily represent maximal power of each individual joint. The implication is that jump performance may well be a good representation of overall joint power; it is, however, not an accurate measure to evaluate maximal individual joint power as part of contemporary training and rehabilitation methods.     

Predicting lower body power from vertical jump prediction equations for loaded jump squats at different intensities in men and women

The purpose of this study was to determine the efficacy of estimating peak lower body power from a maximal jump squat using 3 different vertical jump prediction equations. Sixty physically active college students (30 men, 30 women) performed jump squats with a weighted bar's applied load of 20, 40, and 60% of body mass across the shoulders. Each jump squat was simultaneously monitored using a force plate and a contact mat. Peak power (PP) was calculated using vertical ground reaction force from the force plate data. Commonly used equations requiring body mass and vertical jump height to estimate PP were applied such that the system mass (mass of body + applied load) was substituted for body mass. Jump height was determined from flight time as measured with a contact mat during a maximal jump squat. Estimations of PP (PP(est)) for each load and for each prediction equation were compared with criterion PP values from a force plate (PP(FP)). The PP(est) values had high test-retest reliability and were strongly correlated to PP(FP) in both men and women at all relative loads. However, only the Harman equation accurately predicted PP(FP) at all relative loads. It can therefore be concluded that the Harman equation may be used to estimate PP of a loaded jump squat knowing the system mass and peak jump height when more precise (and expensive) measurement equipment is unavailable. Further, high reliability and correlation with criterion values suggest that serial assessment of power production across training periods could be used for relative assessment of change by either of the prediction equations used in this study.     

The influence of body mass on calculation of power during lower-body resistance exercises

The objective of this investigation was to examine the influence of body mass in the calculation of power and the subsequent effect on the load-power relationship in the jump squat, squat, and power clean. Twelve Division I male athletes were evaluated on their performance across various intensities in all the 3 lifts. Power output was calculated using 3 separate techniques: (a) including the contribution of body mass in force output (IBM), (b) including the contribution of the mass of body less the mass of the shanks and feet in force output (IBMS), and (c) excluding the contribution of body mass in force output (EBM). Peak power, peak power relative to body mass, and peak force calculated using EBM were significantly (p < or = 0.05) lower than outputs calculated with IBM and IBMS. The load that maximized power output was unchanged between the 3 techniques in the jump squat (0% 1 repetition maximum [1RM]) and power clean (80% 1RM) but was shifted from 56% (IBM and IBMS) to 71% 1RM (EBM) in the squat. Across all 3 movements, the shape of the load-power curve was affected when derived via the EBM method as a result of the underrepresentation of power output at light loads. This was due to the majority of the load being neglected when the mass of the body was removed from the system mass used in the calculation of force. This study indicates that not only is the actual power output significantly lower when body mass is excluded from the force output of a lower body movement, but the load-power relationship is altered as well. Therefore, it is imperative that the mass of the individual being tested is incorporated into the calculation of force used to determine power output during lower-body movements.     

Reliability and factorial validity of squat and countermovement jump tests

The primary aim of this study was to determine reliability and factorial validity of squat (SJ) and countermovement jump (CMJ) tests. The secondary aim was to compare 3 popular methods for the estimation of vertical jumping height. Physical education students (n = 93) performed 7 explosive power tests: 5 different vertical jumps (Sargent jump, Abalakow's jump with arm swing and without arm swing, SJ, and CMJ) and 2 horizontal jumps (standing long jump and standing triple jump). The greatest reliability among all jumping tests (Cronbach's alpha = 0.97 and 0.98) had SJ and CMJ. The reliability alpha coefficients for other jumps were also high and varied between 0.93 and 0.96. Within-subject variation (CV) in jumping tests ranged between 2.4 and 4.6%, the values being lowest in both horizontal jumps and CMJ. Factor analysis resulted in the extraction of only 1 significant principal component, which explained 66.43% of the variance of all 7 jumping tests. Since all jumping tests had high correlation coefficients with the principal component (r = 0.76-0.87), it was interpreted as the explosive power factor. The CMJ test showed the highest relationship with the explosive power factor (r = 0.87), that is, the greatest factorial validity. Other jumping tests had lower but relatively homogeneous correlation with the explosive power factor extracted. Based on the results of this study, it can be concluded that CMJ and SJ, measured by means of contact mat and digital timer, are the most reliable and valid field tests for the estimation of explosive power of the lower limbs in physically active men.     

Anthropometrical, physiological, and tracked power profiles of elite taekwondo athletes 9 weeks before the Olympic competition phase

Physiological, anthropometric, and power profiling data were retrospectively analyzed from 4 elite taekwondo athletes from the Australian National Olympic team 9 weeks from Olympic departure. Power profiling data were collected weekly throughout the 9-week period. Anthropometric skinfolds generated a lean mass index (LMI). Physiological tests included a squat jump and bench throw power profile, bleep test, 20-m sprint test, running VO2max test, and bench press and squat 3 repetition maximum (3RM) strength tests. After this, the athletes power, velocity, and acceleration profile during unweighted squat jumps and single-leg jumps were tracked using a linear position transducer. Increases in power, velocity, and acceleration between weeks and bilateral comparisons were analyzed. Athletes had an LMI of 37.1 ± 0.4 and were 173.9 ± 0.2 m and 67 ± 1.1 kg. Relatively weaker upper body (56 ± 11.97 kg 3RM bench press) compared to lower body strength (88 ± 2.89 kg 3RM squat) was shown alongside a VO2max of 53.29 ml(-1)·min(-1)·kg, and a 20-m sprint time of 3.37 seconds. Increases in all power variables for single-leg squat and squat jumps were found from the first session to the last. Absolute peak power in single-leg squat jumps increased by 13.4-16% for the left and right legs with a 12.9% increase in squat jump peak power. Allometrically scaled peak power showed greater increases for single-leg (right leg: 18.55%; left: 23.49%) and squat jump (14.49%). The athlete's weight did not change significantly throughout the 9-week mesocycle. Progressions in power increases throughout the weeks were undulating and can be related to the intensity of the prior week's training and athlete injury. This analysis has shown that a 9-week mesocycle before Olympic departure that focuses on core lifts has the ability to improve power considerably.     

RELIABILITY AND VALIDITY OF AN ACCELEROMETRIC SYSTEM FOR ASSESSING VERTICAL JUMPING PERFORMANCE

The validity of an accelerometric system (Myotest©) for assessing vertical jump height, vertical force and power, leg stiffness and reactivity index was examined. 20 healthy males performed 3ד5 hops in place”, 3ד1 squat jump” and 3× “1 countermovement jump” during 2 test-retest sessions. The variables were simultaneously assessed using an accelerometer and a force platform at a frequency of 0.5 and 1 kHz, respectively. Both reliability and validity of the accelerometric system were studied. No significant differences between test and retest data were found (p < 0.05), showing a high level of reliability. Besides, moderate to high intraclass correlation coefficients (ICCs) (from 0.74 to 0.96) were obtained for all variables whereas weak to moderate ICCs (from 0.29 to 0.79) were obtained for force and power during the countermovement jump. With regards to validity, the difference between the two devices was not significant for 5 hops in place height (1.8 cm), force during squat (-1.4 N · kg⁻¹) and countermovement (0.1 N · kg⁻¹) jumps, leg stiffness (7.8 kN · m⁻¹) and reactivity index (0.4). So, the measurements of these variables with this accelerometer are valid, which is not the case for the other variables. The main causes of non-validity for velocity, power and contact time assessment are temporal biases of the takeoff and touchdown moments detection.     

Assessment of unloaded and loaded squat jump performance with a force platform: Which jump starting threshold provides more reliable outcomes?

This study aimed to explore the influence of different onset thresholds on the between-session reliability and magnitude of squat jump (SJ) performance. Twenty men were tested on two sessions separated by 48 h against external loads of 0.5, 30 and 60 kg. The initiation of the jump was defined as the first instant in which the vertical ground reaction force exceeded system weight by 10 N (10 N), 50 N (50 N), 1% of system weight (1%SW), 10% of system weight (10%SW) and five standard deviation of system weight minus 30 ms (5SDSW). The following variables were calculated from the force-time signal collected on a force platform: mean, peak and time to peak values of force, power and velocity, average rate of force development, peak rate of force development, rate of force development index, impulse, jump height, and push-off time. The 50 N, 10%SW and 5SDSW thresholds generally revealed a higher reliability than the 10 N and 1%SW thresholds (97 and 21 out of 252 comparisons for the coefficient of variation and intraclass correlation coefficient, respectively). The magnitude of most of the variables calculated using the 50 N and 10%SW thresholds significantly differed with respect to the 10 N, 1%SW and 5SDSW thresholds (P < 0.05). These results suggest that both the reliability and magnitude of SJ performance variables are influenced by the jump starting threshold. The 50 N, 10%SW and 5SDSW thresholds maximise the reliability of SJ performance variables, while the 5SDSW should be recommended since it considers more force signal than the 50 N and 10%SW thresholds.     

Explosive lower limb extension mechanics: An on-land vs. in-water exploratory comparison

During a horizontal underwater push-off, performance is strongly limited by the presence of water, inducing resistances due to its dense and viscous nature. At the same time, aquatic environments offer a support to the swimmer with the hydrostatic buoyancy counteracting the effects of gravity. Squat jump is a vertical terrestrial push-off with a maximal lower limb extension limited by the gravity force, which attracts the body to the ground. Following this observation, we characterized the effects of environment (water vs. air) on the mechanical characteristics of the leg push-off. Underwater horizontal wall push-off and vertical on-land squat jumps of two local swimmers were evaluated with force plates, synchronized with a lateral camera. To better understand the resistances of the aquatic movement, a quasi-steady Computational Fluid Dynamics (CFD) analysis was performed. The force-, velocity- and power-time curves presented similarities in both environments corresponding to a proximo-distal joints organization. In water, swimmers developed a three-step explosive rise of force, which the first one mainly related to the initiation of body movement. Drag increase, which was observed from the beginning to the end of the push-off, related to the continuous increase of body velocity with high values of drag coefficient (C_D) and frontal areas before take-off. Specifically, with velocity, frontal area was the main drag component to explain inter-individual differences, suggesting that the streamlined position of the lower limbs is decisive to perform an efficient push-off. This study motivates future CFD simulations under more ecological, unsteady conditions.     

Effects of different dropping intensities on fascicle and tendinous tissue behavior during stretch-shortening cycle exercise.

This study examined whether the elasticity of the tendinous tissues plays an important role in human locomotion by improving the power output and efficiency of skeletal muscle. Ten subjects performed one-leg drop jumps (DJ) from different dropping heights with a constant rebound height. The fascicle length of the vastus lateralis muscle was measured by using real-time ultrasonography during DJ. In the braking phase of the DJ, fascicle lengthening decreased and the tendinous tissue lengthening increased with increased dropping intensity. In the subsequent push-off phase, the shortening of tendinous tissues increased with higher dropping intensity. The averaged electromyographic activities of the preactivation and braking phases increased and those of the push-off phase decreased as the drop height was increased. With higher dropping height but constant submaximal rebound jump, the stretched tendinous tissue length increased with less stretched fascicle during the braking phase. In the subsequent push-off phase, the recoil of tendinous tissues became greater. These results suggest that the increased prestretch intensity has considerable influence on the process of storage and subsequent recoil of the elastic energy during the stretch-shortening cycle action.     

Influence of type of muscle contraction, gender, and lifting experience on postactivation potentiation performance

Postactivation potentiation (PAP) or enhanced contractile capabilities may be influenced by a number of factors. This study examined the influence of type of muscle contraction (isometric vs. dynamic), gender, and previous weightlifting experience on PAP as demonstrated by changes in jump height and power output. Thirty young men (n = 15) and women (n = 15), classified as either having previous weightlifting experience (n = 20) or not (n = 10), performed 3 different sets of countermovement jumps, with the first set used to determine baseline measures of jump height and power. The second set was performed after a maximal isometric squat protocol (maximal voluntary contraction [MVC]-PAP) to induce PAP, and the third set of jumps was performed after a maximal dynamic squat (DS) protocol (DS-PAP). A 3-way repeated measures analysis of variance determined that jump height after the MVC-PAP protocol was significantly higher than both the pretest and DS-PAP values, that men performed significantly better than women, and that the experienced lifters responded more favorably than the inexperienced lifters. Jump power was also significantly greater for the MVC-PAP condition compared with the other 2 conditions, and DS-PAP power also improved when compared with the pretest values, with men performing significantly better than women. All results remained consistent after accounting for height and weight differences (body mass index) between the groups. In conclusion, the isometric condition (MVC-PAP) evoked a greater muscle postactivation potentiation than the dynamic condition (DS-PAP), and postactivation was enhanced by previous weightlifting experience. The practical manipulation of MVC by pushing, squatting, or both against fixed objects, such as walls and low ceilings, could be a very simple and cost-effective way to arouse a state of PAP before sports performance that requires high force and power outputs.