Three-dimensional structure of proteinase K at 0.15-nm resolution

The crystal and molecular structure of proteinase K was determined by X-ray diffraction data to 0.15-nm resolution. The enzyme belongs to the subtilisin family with an active-site catalytic triad Asp39--His69--Ser224 but is a representative of a subgroup with a free Cys73 close to and 'below' the active His69. Besides this Cys72, proteinase K has two disulfide bonds, Cys34--Cys123 and Cys178--Cys249, which contribute to the stability of the tertiary structure consisting of an extended central parallel beta-sheet decorated by six alpha-helices, three short antiparallel beta-sheets, 18 beta-turns and involving several internal, structurally important water molecules. Proteinase K exhibits two Ca2+-binding sites, one very strong and the other weak, which were the sites of the heavy atoms (Pb2+, Sm3+) used to solve the crystal structure. The weak binding site is liganded to the N and C termini, Thr16 and Asp260, and is only incompletely coordinated by oxygen ligands. The strong binding site is coordinated in the form of a pentagonal bipyramid with the side chain carboxylate of Asp200 and the C = O of Pro175 as apex, and C = O of Val177 and four water molecules in the equatorial plane. Upon removal of this Ca2+, proteinase K loses activity which is interpreted in terms of a local structural deformation involving the substrate-recognition site (Ser132--Gly136), probably associated with a cis----trans isomerization of cis Pro171. Several water molecules are located in the active site. One, W335, is positioned in the 'oxyanion hole' and is displaced by the C = O of the scissile peptide bond of the substrate, as indicated by crystallographic studies with peptide chloromethane inhibitors. Based on these experiments, a reaction mechanism is proposed where the peptide substrate forms a three-stranded antiparallel pleated sheet with the recognition site of proteinase K consisting of Ser132--Leu133--Gly134 on one side and Gly100--Ser101 on the other, followed by expulsion of the oxyanion hole water W335 and hydrolytic cleavage by the Asp39--His69--Serr224 triad. These latter residues display low thermal motion corresponding to well-defined geometry and are hardly accessible to solvent molecules, whereas the recognition-site amino acids are more flexible and partially exposed to solvent.     

Catalytic properties and kinetic mechanism of human recombinant Lys-9 histone H3 methyltransferase SUV39H1: participation of the chromodomain in enzymatic catalysis

Histone H3 lysine 9 (H3K9) methylation is a major component of gene regulation and chromatin organization. SUV39H1 methylates H3K9 at the pericentric heterochromatin region and participates in the maintenance of genome stability. In this study, a recombinant purified SUV39H1 is used for substrate specificity and steady-state kinetic analysis with peptides representing the un- or dimethylated lysine 9 histone H3 tail or full-length human recombinant H3 (rH3). Recombinant SUV39H1 methylated its substrate via a nonprocessive mechanism. Binding of either peptide or AdoMet first to the enzyme made a catalytically competent binary complex. Product inhibition studies with SUV39H1 showed that S-adenosyl-l-homocysteine is a competitive inhibitor of S-adenosyl-l-methionine and a mixed inhibitor of substrate peptide. Similarly, the methylated peptide was a competitive inhibitor of the unmethylated peptide and a mixed inhibitor of AdoMet, suggesting a random mechanism in a bi-bi reaction for recombinant SUV39H1 in which either substrate can bind to the enzyme first and either product can release first. The turnover numbers (k(cat)) for the H3 tail peptide and rH3 were comparable (12 and 8 h(-)(1), respectively) compared to the value of 1.5 h(-)(1) for an identical dimethylated lysine 9 H3 tail peptide. The Michaelis constant for the methylated peptide (K(m)(pep)) was 13-fold lower compared to that of the unmethylated peptide. The Michaelis constants for AdoMet (K(m)(AdoMet)) were 12 and 6 microM for the unmethylated peptide substrate and rH3, respectively. A reduction in the level of methylation was observed at high concentrations of rH3, implying substrate inhibition. Deletion of the chromodomain or point mutation of the conserved amino acids, W64A or W67A, of SUV39H1 impaired enzyme activity despite the presence of an intact catalytic SET domain. Thus, SUV39H1 utilizes both the chromodomain and the SET domain for catalysis.     

Effect of substrate RNA sequence on the cleavage reaction by a short ribozyme.

Leadzyme is a ribozyme that requires Pb2+. The catalytic sequence, CUGGGAGUCC, binds to an RNA substrate, GGACC downward arrowGAGCCAG, cleaving the RNA substrate at one site. We have investigated the effect of the substrate sequence on the cleavage activity of leadzyme using mutant substrates in order to structurally understand the RNA catalysis. The results showed that leadzyme acted as a catalyst for single site cleavage of a C5 deletion mutant substrate, GGAC downward arrowGAGCCAG, as well as the wild-type substrate. However, a mutant substrate GGACCGACCAG, which had G8 deleted from the wild-type substrate, was not cleaved. Kinetic studies by surface plasmon resonance indicated that the difference between active and inactive structures reflected the slow association and dissociation rate constants of complex formation induced by Pb2+rather than differences in complex stability. CD spectra showed that the active form of the substrate-leadzyme complex was rearranged by Pb2+binding. The G8 of the wild-type substrate, which was absent in the inactive complex, is not near the cleavage site. Thus, these results show that the active substrate-leadzyme complex has a Pb2+binding site at the junction between the unpaired region (asymmetric internal loop) and the stem region, which is distal to the cleavage site. Pb2+may play a role in rearranging the bases in the asymmetric internal loop to the correct position for catalysis.     

A 195-kb cosmid walk encompassing the human Xq28 color vision pigment genes

By using cosmid walking, we have cloned a 195-kb region from chromosome band Xq28 that encompasses the red and green color pigment genes and 85 kb of flanking sequences. This has allowed us to confirm that the color pigment genes are within very homologous units arranged in tandem array. Each unit contains two BssHII sites and one NruI site that are frequently methylated in male leukocyte DNA. A NotI and an EagI site are present 6 kb upstream from the red pigment gene promoter; the NotI site was shown to be unmethylated in the active X chromosome in leukocytes and may represent a CpG island for the whole cluster. We have identified another CpG island, 61 kb 3' from the last green pigment gene, that is unmethylated in leukocytes on the active X chromosome, but methylated on the inactive X. This island is flanked by sequences conserved in evolution and may thus correspond to an expressed gene. We also describe an informative three-allele restriction fragment length polymorphism within the pigment gene cluster.     

NS2B-3 proteinase-mediated processing in the yellow fever virus structural region: in vitro and in vivo studies.

Several of the cleavages required to generate the mature nonstructural proteins from the flaviviral polyprotein are known to be mediated by a complex consisting of NS2B and a serine proteinase domain located in the N-terminal one-third of NS3. These cleavages typically occur after two basic residues followed by a short side chain residue. Cleavage at a similar dibasic site in the structural region is believed to produce the C terminus of the virion capsid protein. To study this cleavage, we developed a cell-free trans cleavage assay for yellow fever virus (YF)-specific proteolytic activity by using a substrate spanning the C protein dibasic site. Cleavage at the predicted site was observed when the substrate was incubated with detergent-solubilized lysates from YF-infected BHK cells. NS2B and the NS3 proteinase domain were the only YF-specific proteins required for this cleavage. Cell fractionation studies demonstrated that the YF-specific proteolytic activity was membrane associated and that activity could be detected only after detergent solubilization. Previous cell-free studies led to a hypothesis that processing in the C-prM region involves (i) translation of C followed by translocation and core glycosylation of prM by using an internal signal sequence, (ii) signalase cleavage to produce a membrane-anchored form of the C protein (anchC) and the N terminus of prM, and (iii) NS2B-3-mediated cleavage at the anchC dibasic site to produce the C terminus of the virion C protein. However, the results of in vivo transient-expression studies do not support this temporal cleavage order. Rather, expression of a YF polyprotein extending from C through the N-terminal one-third of NS3 revealed that C-prM processing, but not translocation, was dependent on an active NS2B-3 proteinase. This suggests that signalase-mediated cleavage in the lumen of the endoplasmic reticulum may be dependent on prior cleavage at the anchC dibasic site. Possible pathways for processing in the C-prM region are outlined and discussed.     

Primary structure of the reactive site of human C1-inhibitor

Human C1-inhibitor (C1-Inh) forms an equimolar complex with complement proteinase C1s that is resistant to dissociation by sodium dodecyl sulfate. The formation of this stable complex results in the cleavage of a peptide bond near the carboxyl terminus of the inhibitor and, whereas the bulk of C1-Inh remains covalently bound to the light chain of C1s, the postcomplex inhibitor peptide can be isolated under denaturing conditions. We have sequenced the amino-terminal region of this peptide and deduced that it represents the carboxyl-terminal side of the reactive site of C1-Inh. Limited proteolysis of C1-Inh by Crotalus atrox protease results in an active derivative lacking an amino-terminal peptide of 36 residues. Further proteolysis of this derivative with Pseudomonas aeruginosa elastase inactivates the inhibitor and a peptide is released. The amino-terminal sequence of this peptide overlaps with that of the postcomplex peptide and indicates that the residue imparting primary specificity to the inhibitor is arginine.     

Structural modeling and functional analysis of the essential ribosomal processing protease Prp from Staphylococcus aureus

In Firmicutes and related bacteria, ribosomal large subunit protein L27 is encoded with a conserved N‐terminal extension that is removed to expose residues critical for ribosome function. Bacteria encoding L27 with this N‐terminal extension also encode a sequence‐specific cysteine protease, Prp, which carries out this cleavage. In this work, we demonstrate that L27 variants with an un‐cleavable N‐terminal extension, or lacking the extension (pre‐cleaved), are unable to complement an L27 deletion in Staphylococcus aureus. This indicates that N‐terminal processing of L27 is not only essential but possibly has a regulatory role. Prp represents a new clade of previously uncharacterized cysteine proteases, and the dependence of S. aureus on L27 cleavage by Prp validates the enzyme as a target for potential antibiotic development. To better understand the mechanism of Prp activity, we analyzed Prp enzyme kinetics and substrate preference using a fluorogenic peptide cleavage assay. Molecular modeling and site‐directed mutagenesis implicate several residues around the active site in catalysis and substrate binding, and support a structural model in which rearrangement of a flexible loop upon binding of the correct peptide substrate is required for the active site to assume the proper conformation. These findings lay the foundation for the development of antimicrobials that target this novel, essential pathway.     

The region of the thrombin receptor resembling hirudin binds to thrombin and alters enzyme specificity.

A thrombin receptor has recently been cloned and the sequence deduced. The sequence reveals a thrombin cleavage site that accounts for receptor activation. The receptor also has an acidic region with some similarities to the carboxyl-terminal region of the leech thrombin inhibitor, hirudin. Synthetic peptides corresponding to the receptor cleavage site (residues 38-45), the hirudin-like domain (residues 52-69), and the covalently associated domains (residues 38-64) were evaluated for their ability to bind to thrombin. Peptides 38-45 and 38-64 were competitive inhibitors of thrombin's chromogenic substrate activity (Ki = 0.96 mM and 0.6 microM, respectively. Residues 52-69 altered the chromogenic substrate specificity, resulting in accelerated cleavage of some substrates and inhibited cleavage of others. The same peptide binds to thrombin and alters the fluorescence emission intensity of 5-dimethylaminonaphthalene-1-sulfonyl (dansyl)-thrombin in which the dansyl is attached directly to the active site serine (Kd = 32 +/- 7 microM). Residues 52-69 displace the carboxyl-terminal peptide of hirudin, indicating that they share a common binding site in the anion exosite of thrombin. These data suggest that the thrombin receptor has high affinity for thrombin due to the presence of the hirudin-like domain and that this domain alters the specificity of thrombin. This change in specificity may account for the ability of the receptor to serve as an excellent thrombin substrate despite the presence of an Asp residue in the P3 site, which is normally inhibitory to thrombin activity.     

Profiling the enzymatic properties and inhibition of human complement factor B

Human complement factor B is the crucial catalytic component of the C3 convertase enzyme that activates the alternative pathway of complement-mediated immunity. Although a serine protease in its own right, factor B circulates in human serum as an inactive zymogen and there is a crystal structure only for the inactive state of factor B and various fragments. To provide greater insight to the catalytic function and properties of factor B, we have used short para-nitroanilide derivatives of 4- to 15-residue peptides as substrates to profile the catalytic properties of factor B. Among factors found to influence catalytic activity of factor B was an unusual dependence on pH. Non-physiological alkaline conditions strongly promoted substrate cleavage by factor B, consistent with a pH-accessible conformation of the enzyme that may be critical for catalytic function. Small N-terminal extensions to conventional hexapeptide para-nitroanilide substrates significantly increased catalytic activity of factor B, which was more selective for its cleavage site than trypsin. The new chromogenic assay enabled optimization of catalysis conditions, the profiling of different substrate sequences, and the development of the first reversible and competitive substrate-based inhibitor of factor B. The inhibitor was also shown to prevent in vitro formation of C3a from C3 by factor B, by synthetic and by natural C3 convertase of the alternative complement activation pathway, and to block formation of membrane attack complex. The availability of a reversible substrate-based inhibitor that could stabilize the active conformation of factor B, in conjunction with a pH-promoted higher processing activity, may offer a new avenue to obtain crystal structures of factor B and C3 convertase in an active conformation.     

Molecular Determinants of the Substrate Specificity of the Complement-initiating Protease,C1r

The serine protease, C1r, initiates activation of the classical pathway of complement, which is a crucial innate defense mechanism against pathogens and altered-self cells. C1r both autoactivates and subsequently cleaves and activates C1s. Because complement is implicated in many inflammatory diseases, an understanding of the interaction between C1r and its target substrates is required for the design of effective inhibitors of complement activation. Examination of the active site specificity of C1r using phage library technology revealed clear specificity for Gln at P2 and Ile at P1′, which are found in these positions in physiological substrates of C1r. Removal of one or both of the Gln at P2 and Ile at P1′ in the C1s substrate reduced the rate of C1r activation. Substituting a Gln residue into the P2 of the activation site of MASP-3, a protein with similar domain structure to C1s that is not normally cleaved by C1r, enabled efficient activation of this enzyme. Molecular dynamics simulations and structural modeling of the interaction of the C1s activation peptide with the active site of C1r revealed the molecular mechanisms that particularly underpin the specificity of the enzyme for the P2 Gln residue. The complement control protein domains of C1r also made important contributions to efficient activation of C1s by this enzyme, indicating that exosite interactions were also important. These data show that C1r specificity is well suited to its cleavage targets and that efficient cleavage of C1s is achieved through both active site and exosite contributions.     

Elucidation of the substrate specificity of the C1s protease of the classical complement pathway

The complement system is a central component of host defense but can also contribute to the inflammation seen in pathological conditions. The C1s protease of the first complement component, the C1 complex, initiates the pathway. In this study we have elucidated the full specificity of the enzyme for the first time using a randomized phage display library. It was found that, aside from the crucial P(1) position, the S(3) and S(2) subsites (in that order) played the greatest role in determining specificity. C1s prefers Leu or Val at P(3) and Gly or Ala residues at P(2). Apart from the S(2)' position, which showed specificity for Leu, prime subsites did not greatly affect specificity. It was evident, however, that together they significantly contributed to the efficiency of cleavage of a peptide. A peptide substrate based on the top sequence obtained in the phage display validated these results and produced the best kinetics of any C1s substrate to date. The results allow an understanding of the active site specificity of the C1s protease for the first time and provide a basis for the development of specific inhibitors aimed at controlling inflammation associated with complement activation in adverse pathological situations.     

Three-dimensional structure of porcine procarboxypeptidase B: a structural basis of its inactivity.

Procarboxypeptidase B is converted to enzymatically active carboxypeptidase B by limited proteolysis catalysed by trypsin, removing the long N-terminal activation segment of 95 amino acids. The three-dimensional crystal structure of procarboxypeptidase B from porcine pancreas has been determined at 2.3 A resolution and refined to a crystallographic R-factor of 0.169. The functional determinants of its enzymatic inactivity and of its activation by limited proteolysis have thus been unveiled. The activation segment folds in a globular region with an open sandwich antiparallel-alpha antiparallel-beta topology and in a C terminal alpha-helix which connects it to the enzyme moiety. The globular region (A7-A82) shields the preformed active site, and establishes specific interactions with residues important for substrate recognition. AspA41 forms a salt bridge with Arg145, which in active carboxypeptidase binds the C-terminal carboxyl group of substrate molecules. The connecting region occupies the putative extended substrate binding site. The scissile peptide bond cleaved by trypsin during activation is very exposed. Its cleavage leads to the release of the activation segment and to exposure of the substrate binding site. An open-sandwich folding has been observed in a number of other proteins and protein domains. One of them is the C-terminal fragment of L7/L12, a ribosomal protein from Escherichia coli that displays a topology similar to the activation domain of procarboxypeptidase.     

Molecular modeling of the dimeric structure of human lipoprotein lipase and functional studies of the carboxyl-terminal domain.

Lipoprotein lipase (LPL) plays a key role in lipid metabolism. Molecular modeling of dimeric LPL was carried out using insight ii based upon the crystal structures of human, porcine, and horse pancreatic lipase. The dimeric model reveals a saddle-shaped structure and the key heparin-binding residues in the amino-terminal domain located on the top of this saddle. The models of two dimeric conformations - a closed, inactive form and an open, active form - differ with respect to how surface-loop positions affect substrate access to the catalytic site. In the closed form, the surface loop covers the catalytic site, which becomes inaccessible to solvent. Large conformational changes in the open form, especially in the loop and carboxyl-terminal domain, allow substrate access to the active site. To dissect the structure-function relationships of the LPL carboxyl-terminal domain, several residues predicted by the model structure to be essential for the functions of heparin binding and substrate recognition were mutagenized. Arg405 plays an important role in heparin binding in the active dimer. Lys413/Lys414 or Lys414 regulates heparin affinity in both monomeric and dimeric forms. To evaluate the prediction that LPL forms a homodimer in a 'head-to-tail' orientation, two inactive LPL mutants - a catalytic site mutant (S132T) and a substrate-recognition mutant (W390A/W393A/W394A) - were cotransfected into COS7 cells. Lipase activity could be recovered only when heterodimerization occurred in a head-to-tail orientation. After cotransfection, 50% of the wild-type lipase activity was recovered, indicating that lipase activity is determined by the interaction between the catalytic site on one subunit and the substrate-recognition site on the other.     

Quantitation of the endopeptidase activity generating gamma-endorphin from beta-endorphin in rat brain synaptic membranes by a radiometric assay

gamma-Endorphin is a naturally occurring biologically active peptide that is produced by an endopeptidase activity cleaving its precursor beta-endorphin. This enzyme was termed gamma-endorphin generating enzyme (gamma-EGE). In order to quantitate gamma-EGE activity by means of a simple and sensitive assay two synthetic peptides derived from the sequence surrounding the gamma-EGE cleavage site in beta-endorphin were tested as substrates. One of these peptides Ac-Val-Thr-Leu-Phe-Lys-NHCH3 fulfilled all criteria for a suitable gamma-EGE substrate. The peptide was exclusively cleaved at the correct bond for gamma-EGE upon incubation with brain synaptic membranes, and this cleavage was inhibited by the naturally occurring substrate beta-endorphin. The peptide was insensitive to cleavage by exopeptidases and cathepsin D. Addition of a 14C-labeled methyl group at the lysine residue of this peptide by reductive methylation did not alter its properties as a substrate for gamma-EGE activity. The use of the 14C-labeled peptide allowed sensitive quantitation of its radioactive products after simple separation by hydrophobic chromatography on minicolumns containing polystyrene beads. gamma-EGE activity increased linearly with a protein concentration and incubation time. This assay can be used for reliable quantitation of gamma-EGE activity and permits investigations on the regulation of gamma-endorphin production.     

The effect of methylation outside the recognition sequence of restriction endonuclease PvuII on its cleavage efficiency.

This study is to extend our earlier observation that Dam and Dcm methylation outside the PvuII recognition sequence inhibited PvuII cleavage in one of the three PvuII sites of pGEM4Z-ras DNA. In this paper, a new recombinant plasmid DNA, pGEM4-SV40ori-anti-ras, was constructed which has only two PvuII sites, I and II. The Dam and Dcm-methylated and unmethylated DNAs were produced in Escherichia coli and linearized by ScaI. The DNA molecules were digested with different amounts of PvuII. The results show that by comparing the DNA fragment number and intensity of the partial and final products in agarose gel, PvuII site I on the methylated DNA molecule was digested four- to eight-fold more slowly than site II. In the unmethylated plasmid DNA, the two PvuII sites were cleaved at about the same rate. The difference was caused only by methylation of Dam and Dcm sites outside the PvuII recognition sequence. A methylated Dam site immediately adjacent to the less efficiently cut PvuII site I may be responsible for the inhibitory effect. We suggest that a new parameter, involving methylation of sites outside the recognition sequence, be considered in kinetic experiments on cleavage.     

Protein tyrosine phosphatase SHP-1 specifically recognizes C-terminal residues of its substrates via helix alpha0

The catalytic domain of protein tyrosine phosphatase SHP-1 possesses distinct substrate specificity. It recognizes the P-3 to P-5 residues of its substrates via the beta5-loop-beta6 region. To study the substrate specificity further, we determined the structure of the catalytic domain of SHP-1 (C455S) complexed with a less-favorable-substrate peptide originated from SIRPalpha. The complex has disordered N-terminal peptide structure and reduced interactions between the N-terminal peptide and the beta5-loop-beta6 region. This could be the basis for the lower affinity of peptide pY(427) for the catalytic domain of SHP-1. In addition, by comparing the SHP-1/less-favorable peptide complex structure with the SHP-1/substrate complex structures, we identified a novel substrate-recognition site in the catalytic domain of SHP-1. This site was formed by helix alpha0 and the alpha5-loop-alpha6 motif of SHP-1, and specifically bound residues at the P + 4 and further C-terminal positions of peptide substrates.     

The inhibition of restriction endonuclease PvuII cleavage activity by methylation outside its recognition sequence.

The recombinant plasmid pGEM4Z-ras DNA which was methylated on dam and dcm sites outside the PvuII recognition sequence was digested with restriction endonuclease PvuII, and one of the three PvuII sites was about 16-fold less efficient to cleave than either of the other two. On the contrary, the three PvuII sites were cleaved at about the same rate on the unmethylated DNA molecule. The results show that the cleavage inhibition of the methylated DNA on the certain PvuII site was caused by methylation outside the PvuII recognition sequence. Maybe a adjacent methylated dam site *A was responsible for the less efficient cleavage. This observation suggests that methylation outside the recognition sequence may be considered a new factor in the kinetic experiment of restriction endonuclease.     

Phosphorylation-dependent conformational changes induce a switch in the actin-binding function of MARCKS

Phosphorylation of myristoylated alanine-rich protein kinase C substrate (MARCKS) by protein kinase C eliminates actin filament cross-linking activity, but residual filament binding activity docks phosphorylated MARCKS on filamentous actin. The postulated actin-binding region of MARCKS, which includes a Ca(2+)-calmodulin-binding site, has been portrayed with alpha-helical structure, analogous to other calmodulin-binding domains. Previous speculation suggested that MARCKS may dimerize to form the two functional actin-binding sites requisite for cross-linking activity. Contrary to these hypotheses, we show that MARCKS peptide with actin-cross-linking activity has an extended structure in aqueous solution but assumes a more compact structure upon phosphorylation. We hypothesize that structural changes in the MARCKS peptide induced by phosphorylation create a dynamic structure that, on average, has only one actin-binding site. Moreover, independent of the state of phosphorylation, this peptide is monomeric rather than dimeric, implying that two distinct actin-binding sites are responsible for the actin-cross-linking activity of unphosphorylated MARCKS. These studies uniquely elucidate the mechanism by which phosphorylation of MARCKS induces structural changes and suggest how these structural changes determine biological activity.     

An analysis of methyltransferase SsoII-DNA contacts in the enzyme-substrate complex

The functional groups of the DNA methylation site that are involved in the DNA interaction with methyltransferase SsoII at the recognition stage were identified. The contacts in the enzyme-substrate complex were analyzed in the presence of S-adenosyl-L-homocysteine using the interference footprinting assay with formic acid, hydrazine, dimethyl sulfate, or N-ethyl-N-nitrosourea as a modifying reagent. It was shown that the replacement of the central A.T by the G.C pair in the methylation site did not affect the enzyme-DNA interaction, whereas the use of a substrate with one chain methylated (monomethylated substrate) instead of the unmethylated substrate dramatically changes the DNA contacts. The binding constants of unmethylated and monomethylated substrates with methyltransferase SsoII in the presence of S-adenosyl-L-homocysteine were calculated.     

Internal ribosome entry site within hepatitis C virus RNA.

The mechanism of initiation of translation on hepatitis C virus (HCV) RNA was investigated in vitro. HCV RNA was transcribed from the cDNA that corresponded to nucleotide positions 9 to 1772 of the genome by using phage T7 RNA polymerase. Both capped and uncapped RNAs thus transcribed were active as mRNAs in a cell-free protein synthesis system with lysates prepared from HeLa S3 cells or rabbit reticulocytes, and the translation products were detected by anti-gp35 antibodies. The data indicate that protein synthesis starts at the fourth AUG, which was the initiator AUG at position 333 of the HCV RNA used in this study. Efficiency of translation of the capped methylated RNA appeared to be similar to that of the capped unmethylated RNA. However, a capped methylated RNA showed a much higher activity as mRNA than did the capped unmethylated RNA in rabbit reticulocyte lysates when the RNA lacked a nucleotide sequence upstream of position 267. The results strongly suggest that HCV RNA carries an internal ribosome entry site (IRES). Artificial mono- and dicistronic mRNAs were prepared and used to identify the region that carried the IRES. The results indicate that the sequence between nucleotide positions 101 and 332 in the 5' untranslated region of HCV RNA plays an important role in efficient translation. Our data suggest that the IRES resides in this region of the RNA. Furthermore, an IRES in the group II HCV RNA was found to be more efficient than that in the group I HCV RNA.