Allele-specific long-range PCR/sequencing method for allelic assignment of multiple single nucleotide polymorphisms

We report an allele-specific sequencing method using allele-specific long-range polymerase chain reaction (PCR) to determine if multiple (specifically, more than three) single nucleotide polymorphisms (SNPs) are located on the same allele. We sequenced the glucocorticoid receptor (GR) gene as a model and detected four nucleotide changes, including two novel variations, in intron 4 and exons 6, 8, and 9 alpha in four of the investigated cell lines. The terminal SNPs (intron 4 and exon 9 alpha) were separated by 19 kb. Following SNP identification, the first round PCR allele-specific primers are designed at the both distal SNP sites (intron 4 and exon 9 alpha), placing the SNP positions at the primer 3'-end. Using these first round PCR products as template, the second round PCR was performed to separately amplify exons 6 and 8. These second round PCR products were subsequently sequenced. The sequencing results showed that the four SNPs were located on the same allele, i.e., forming a haplotype. This allele-specific long-range PCR/sequencing (ALP/S) method is rapid and applicable to the allelic assignment for more than three SNPs.     

SNPbox: a modular software package for large-scale primer design

SUMMARY: We developed a modular software package SNPbox that automates and standardizes the generation of PCR primers and is used in the strategy for constructing single nucleotide polymorphisms (SNPs) maps. In this strategy, the focus of primer design can be either on the validation of annotated public SNPs or on the SNP discovery in exon regions or extended genomic regions, both by resequencing. SNPbox relies on Primer3 for the primer design and combines this program with other publicly available software tools such as BLAST, Spidey and RepeatMasker, and newly developed algorithms. Primer conditions were chosen such that PCR amplifications are uniform for each PCR amplicon facilitating the use of high-throughput genetic platforms. SNPbox can also be used for the design of primer sets for mutation analysis, STR marker genotyping and microarray oligo design. Of the 2500 primer sets designed by SNPbox, 95% successfully amplified genomic DNA under uniform PCR conditions. AVAILABILITY: The software is available from the authors upon request. SUPPLEMENTARY INFORMATION: SNPbox_supplement.     

Pyrosequencing protocol using a universal biotinylated primer for mutation detection and SNP genotyping

DNA sequencing has markedly changed the nature of biomedical research, identifying millions of polymorphisms along the human genome that now require further analysis to study the genetic basis of human diseases. Among the DNA-sequencing platforms available, Pyrosequencing has become a useful tool for medium-throughput single nucleotide polymorphism (SNP) genotyping, mutation detection, copy-number studies and DNA methylation analysis. Its 96-well genotyping format allows reliable results to be obtained at reasonable costs in a few minutes. However, a specific biotinylated primer is usually required for each SNP under study to allow the capture of single-stranded DNA template for the Pyrosequencing assay. Here, we present an alternative to the standard labeling of PCR products for analysis by Pyrosequencing that circumvents the requirement of specific biotinylated primers for each SNP of interest. This protocol uses a single biotinylated primer that is simultaneously incorporated into all M13-tagged PCR products during the amplification reaction. The protocol covers all steps from the PCR amplification and capture of single-stranded template, its preparation, and the Pyrosequencing assay itself. Once the correct primer stoichiometry has been determined, the assay takes around 2 h for PCR amplification, followed by 15-20 min (per plate) to obtain the genotypes.     

一种单核苷酸多态性的单倍型分析技术

运用多步PCR和测序技术,完成基因组中相距较远的单核苷酸多态位点的单倍型构建。通过设计2条等位基因特异性引物,扩增大片段DNA(10kb左右),以此大片段DNA作为下一轮PCR反应的模板,再在该片段中设计待检测区域的PCR引物,进行第2轮PCR。对PCR产物进行测序分析,确定其多态位点处的等位基因。结合第1轮PCR中的等位基因特异性引物,即可确定该大片段DNA中不同单核苷酸多态性构成的单倍型。以脂蛋白脂酶基因为例,应用其启动子区以及第4外显子区的等位基因特异性引物扩增约16kb的DNA片段,然后检测位于该片段中第2、3外显子的多态性。在￡-尸￡-基因第2内含子中发现了 13557G→A多态性。经分析确定出-421G／ 13557G／ 15222A、-421A／ 13557G／ 15222A、-421G／ 13557G／ 15222G、-421G／ 13557A／ 15222A等4种单倍型。等位基因特异性PCR结合小片段测序是一种快捷高效的对相距较远的多个SNP进行单倍型构建的新策略。     

Single nucleotide polymorphism genotyping using allele-specific PCR and fluorescence melting curves

We present a PCR method for identification of single nucleotide polymorphisms (SNPs), using allele-specific primers designed for selective amplification of each allele. Matching the SNP at the 3' end of the forward or reverse primer, and additionally incorporating a 3' mismatch to prevent amplification of the incorrect allele, results in selectivity of the allele-specific primers. DNA melting analysis with fluorescent SYBR Green affords detection of the PCR products. By incorporating a GC-rich sequence into one of the two allele-specific primers to increase the melting temperature, both alleles can be measured simultaneously at their respective melting temperatures. Applying the DNA melting analysis to SNPs in ApoE and ABCA1 yielded results identical to those obtained with other genotyping methods. This provides a cost-effective, high-throughput method for amplification and scoring of SNPs.     

Multiplex Pyrosequencing

We describe here the development of a new and simple single-tube multiplex Pyrosequencing assay. Genomic DNA or cDNA was employed to PCR amplify region(s) using biotinylated and normal primer(s). Subsequent to capture of PCR products on streptavidin-coated beads, single-stranded DNA separation and hybridization of multiple sequencing primers, Pyrosequencing was performed. The obtained pyrogram resulted in a unique pattern in which the intensity of the signal determined the number of incorporated nucleotide(s). Here, we demonstrate the use of this multiplex Pyrosequencing for single nucleotide polymorphisms genotyping and microbial typing.     

Molecular haplotype determination using allele-specific PCR and pyrosequencing technology

Haplotyping of single-nucleotide polymorphisms (SNPs) is usually performed statistically by computational analysis or by time-consuming cloning techniques. Here we present a simple molecular approach for reliable haplotype determination on individual samples. The procedure is based on allele-specific PCR (AS-PCR) in combination with Pyrosequencing analysis. AS-PCR primers for each allelic variant of the investigated SNPs were used. A mismatch introduced at the second base from the 3' end dramatically improved allele specificity. Analysis of multiple SNPs on amplified fragments using Pyrosequencing technology allowed determination of haplotypes. Genotyping of heterozygote samples after AS-PCR gave a typical monoallelic pattern at each SNP, in which the identity of the present allele depended on the allele-specific initial amplification. Haplotype determination by the described procedure proved to be highly reliable. The results obtained by Pyrosequencing technology have the benefit of being truly quantitative, enabling detection of any nonspecific allele amplification.     

Single nucleotide polymorphism (SNP) discovery in mammals: a targeted-gene approach

Single nucleotide polymorphisms (SNPs) have rarely been exploited in nonhuman and nonmodel organism genetic studies. This is due partly to difficulties in finding SNPs in species where little DNA sequence data exist, as well as to a lack of robust and inexpensive genotyping methods. We have explored one SNP discovery method for molecular ecology, evolution, and conservation studies to evaluate the method and its limitations for population genetics in mammals. We made use of 'CATS' (or 'EPIC') primers to screen for novel SNPs in mammals. Most of these primer sets were designed from primates and/or rodents, for amplifying intron regions from conserved genes. We have screened 202 loci in 16 representatives of the major mammalian clades. Polymerase chain reaction (PCR) success correlated with phylogenetic distance from the human and mouse sequences used to design most primers; for example, specific PCR products from primates and the mouse amplified the most consistently and the marsupial and armadillo amplifications were least successful. Approximately 24% (opossum) to 65% (chimpanzee) of primers produced usable PCR product(s) in the mammals tested. Products produced generally high but variable levels of readable sequence and similarity to the expected genes. In a preliminary screen of chimpanzee DNA, 12 SNPs were identified from six (of 11) sequenced regions, yielding a SNP on average every 400 base pairs (bp). Given the progress in genome sequencing, and the large numbers of CATS-like primers published to date, this approach may yield sufficient SNPs per species for population and conservation genetic studies in nonmodel mammals and other organisms.     

Multiplex single nucleotide polymorphism genotyping by adapter ligation-mediated allele-specific amplification

An improved approach for increasing the multiplex level of single nucleotide polymorphism (SNP) typing by adapter ligation-mediated allele-specific amplification (ALM-ASA) has been developed. Based on an adapter ligation, each reaction requires n allele-specific primers plus an adapter-specific primer that is common for all SNPs. Thus, only n+1 primers are used for an n-plex PCR amplification. The specificity of ALM-ASA was increased by a special design of the adapter structure and PCR suppression. Given that the genetic polymorphisms in the liver enzyme cytochrome P450 CYP2D6 (debrisoquine 4-hydroxylase) have profound effects on responses of individuals to a particular drug, we selected 17 SNPs in the CYP2D6 gene as an example for the multiplex SNP typing. Without extensive optimization, we successfully typed 17-plex SNPs in the CYP2D6 gene by ALM-ASA. The results for genotyping 70 different genome samples by the 17-plex ALM-ASA were completely consistent with those obtained by both Sanger's sequencing and PCR restriction fragment length polymorphism (PCR-RFLP) analysis. ALM-ASA is a potential method for SNP typing at an ultra-low cost because of a high multiplex level and a simple optimization step for PCR. High-throughput SNP typing could be readily realized by coupling ALM-ASA with a well-developed automation device for sample processing.     

Identification of SNPs and development of allele-specific PCR markers for γ-gliadin alleles in Triticum aestivum

The coding regions of 28 entries of hexaploid wheat gamma-gliadin genes, gene fragments or pseudogenes in GenBank were used for nucleotide alignment. These sequences could be divided into nine subgroups based on nucleotide variation. The chromosomal locations of five of the seven unassigned subgroups were identified through subgroup-specific polymerase chain reactions (PCR) using Chinese Spring group-1 nulli-tetrasomic lines. Multiple single nucleotide polymorphisms (SNPs) and small insertions/deletions were identified in each subgroup. With further mining from wheat expressed sequence tag databases and targeted DNA sequencing, two SNPs were confirmed and one SNP was discovered for genes at the Gli-A1, Gli-B1 and Gli-D1 loci. A modified allele-specific PCR procedure for assaying SNPs was used to generate dominant DNA markers based on these three SNPs. For each of these three SNPs, two allele-specific primer sets were used to test Chinese Spring and 52 commercial Australian wheat varieties representing a range of low-molecular-weight (LMW) alleles. PCR results indicated that all were positive with one of the primer sets and negative with the other, with the exception of three varieties containing the 1BL/1RS chromosomal translocation that were negative for both. Furthermore, markers GliA1.1, GliB1.1 and GliD1.1 were found to be correlated with Glu-A3 a, b or c, Glu-B3 b, c, d or e and Glu-D3 a, b or e LMW glutenin alleles, respectively. Markers GliA1.2, GliB1.2 and GliD1.2 were found to be correlated with the Glu-A3 d or e, Glu-B3 a, g or h and Glu-D3 c alleles, respectively. These results indicated that the gamma-gliadin SNP markers could be used for detecting linked LMW glutenin subunit alleles that are important in determining the quality attributes of wheat products.     

基于CATS法的江豚SNPs位点筛选

通过比较锚定序列示踪(Comparative Anchor Tagged Sequences, CATS)法,选择人、小鼠及其它哺乳动物中已知的5对CATS引物,通过PCR反应从江豚(Neophocaena phocaenoides)基因组中扩增出相应的DNA片段,结合变性高效液相色谱(Denaturing High Performance Liquid Chromatography, DHPLC)和DNA直接测序等技术,进行江豚单核苷酸多态性(Single nucleotide polymorphisms, SNPs)位点的筛选.通过不同个体同源序列的比对分析,发现其中的4个DNA片段具有多态性,共检测出7个SNPs位点,即大约每370 bp出现1个SNPs.本研究为进一步利用CATS法获得江豚及其它野生动物种群的SNPs位点并进行种群遗传学分析奠定了基础     

Rapid identification of single nucleotide polymorphisms by fluorescence-based capillary electrophoresis

We describe the application of two different fluorescence-based techniques (ddNTP primer extension and single-strand conformation polymorphism (SSCP)) to the detection of single nucleotide polymorphisms (SNPs) by capillary electrophoresis. The ddNTP primer extension technique is based on the extension, in the presence of fluorescence-labeled dideoxy nucleotides (ddNTP, terminators), of an unlabeled oligonucleotide primer that binds to the complementary template immediately adjacent to the mutant nucleotide position. Given that there are no unlabeled dNTPs, a single ddNTP is added to its 3' end, resulting in a fluorescence-labeled primer extension product which is readily separated by capillary electrophoresis. On the other hand, the non-radioisotopic version of SSCP established in this study uses fluorescent dye to label the PCR products, which are also analyzed by capillary electrophoresis. These procedures were used to identify a well-defined SNP in exon 7 of the human p53 gene in DNA samples isolated from two human cell lines (CEM and THP-1 cells). The results revealed a heterozygous single-base transition (G to A) at nucleotide position 14071 in CEM cells, proving that both fluorescence-based ddNTP primer extension and SSCP are rapid, simple, robust, specific and with no ambiguity in interpretation for the detection of well-defined SNPs.     

A novel procedure for efficient genotyping of single nucleotide polymorphisms

Due to the surge in interest in using single nucleotide polymorphisms (SNPs) for genotyping a facile and affordable method for this is an absolute necessity. Here we introduce a procedure that combines an easily automatable single tube sample preparation with an efficient high throughput mass spectrometric analysis technique. Known point mutations or single nucleotide polymorphisms are easily analysed by this procedure. It starts with PCR amplification of a short stretch of genomic DNA, for example an exon of a gene containing a SNP. By shrimp alkaline phosphatase digest residual dNTPs are destroyed. Allele-specific products are generated using a special primer, a conditioned set of α-S-dNTPs and α-S-ddNTPs and a fresh DNA polymerase in a primer extension reaction. Unmodified DNA is removed by 5′-phosphodiesterase digestion and the modified products are alkylated to increase the detection sensitivity in the mass spectrometric analysis. All steps of the preparation are simple additions of solutions and incubations. The procedure operates at the lowest practical sample volumes and in contrast to other genotyping protocols with mass spectrometric detection requires no purification. This reduces the cost and makes it easy to implement. Here it is demonstrated in a version using positive ion detection on described mutations in exon 17 of the amyloid precursor protein gene and in a version using negative ion detection on three SNPs of the granulocyte-macrophage colony stimulating factor gene. Preparation and analysis of SNPs is shown separately and simultaneously, thus demonstrating the multiplexibility of this genotyping procedure. The preparation protocol for genotyping is adapted to the conditions used for the SNP discovery method by denaturing HPLC, thus demonstrating a facile link between protocols for SNP discovery and SNP genotyping. Results corresponded unanimously with the control sequencing. The procedure is useful for high throughput genotyping as it is required for gene identification and pharmacogenomics where large numbers of DNA samples have to be analysed. We have named this procedure the ‘GOOD Assay’ for SNP analysis.     

ELXR: a resource for rapid exon-directed sequence analysis

ELXR (Exon Locator and Extractor for Resequencing) streamlines the process of determining exon/intron boundaries and designing PCR and sequencing primers for high-throughput resequencing of exons. We have pre-computed ELXR primer sets for all exons identified from the human, mouse, and rat mRNA reference sequence (RefSeq) public databases curated by the National Center for Biotechnology Information. The resulting exon-flanking PCR primer pairs have been compiled into a system called ELXRdb, which may be searched by keyword, gene name or RefSeq accession number.     

An innovative SNP genotyping method adapting to multiple platforms and throughputs

Key message

An innovative genotyping method designated as semi-thermal asymmetric reverse PCR (STARP) was developed for genotyping individual SNPs with improved accuracy, flexible throughputs, low operational costs, and high platform compatibility.

Abstract

Multiplex chip-based technology for genome-scale genotyping of single nucleotide polymorphisms (SNPs) has made great progress in the past two decades. However, PCR-based genotyping of individual SNPs still remains problematic in accuracy, throughput, simplicity, and/or operational costs as well as the compatibility with multiple platforms. Here, we report a novel SNP genotyping method designated semi-thermal asymmetric reverse PCR (STARP). In this method, genotyping assay was performed under unique PCR conditions using two universal priming element-adjustable primers (PEA-primers) and one group of three locus-specific primers: two asymmetrically modified allele-specific primers (AMAS-primers) and their common reverse primer. The two AMAS-primers each were substituted one base in different positions at their 3′ regions to significantly increase the amplification specificity of the two alleles and tailed at 5′ ends to provide priming sites for PEA-primers. The two PEA-primers were developed for common use in all genotyping assays to stringently target the PCR fragments generated by the two AMAS-primers with similar PCR efficiencies and for flexible detection using either gel-free fluorescence signals or gel-based size separation. The state-of-the-art primer design and unique PCR conditions endowed STARP with all the major advantages of high accuracy, flexible throughputs, simple assay design, low operational costs, and platform compatibility. In addition to SNPs, STARP can also be employed in genotyping of indels (insertion–deletion polymorphisms). As vast variations in DNA sequences are being unearthed by many genome sequencing projects and genotyping by sequencing, STARP will have wide applications across all biological organisms in agriculture, medicine, and forensics.

     

MultiPSQ: A Software Solution for the Analysis of Diagnostic n-Plexed Pyrosequencing Reactions

Background

Pyrosequencing can be applied for Single-Nucleotide-Polymorphism (SNP)-based pathogen typing or for providing sequence information of short DNA stretches. However, for some pathogens molecular typing cannot be performed relying on a single SNP or short sequence stretch, necessitating the consideration of several genomic regions. A promising rapid approach is the simultaneous application of multiple sequencing primers, called multiplex pyrosequencing. These primers generate a fingerprint-pyrogram which is constituted by the sum of all individual pyrograms originating from each primer used.

Methods

To improve pyrosequencing-based pathogen typing, we have developed the software tool MultiPSQ that expedites the analysis and evaluation of multiplex-pyrograms. As a proof of concept, a multiplex pyrosequencing assay for the typing of orthopoxviruses was developed to analyse clinical samples diagnosed in the German Consultant Laboratory for Poxviruses.

Results

The software tool MultiPSQ enabled the analysis of multiplex-pyrograms originating from various pyrosequencing primers. Thus several target regions can be used for pathogen typing based on pyrosequencing. As shown with a proof of concept assay, SNPs present in different orthopoxvirus strains could be identified correctly with two primers by MultiPSQ.

Conclusions

Software currently available is restricted to a fixed number of SNPs and sequencing primers, severely limiting the usefulness of this technique. In contrast, our novel software MultiPSQ allows analysis of data from multiplex pyrosequencing assays that contain any number of sequencing primers covering any number of polymorphisms.     

EasyExonPrimer

EasyExonPrimer is a web-based software that automates the design of PCR primers to amplify exon sequences from genomic DNA. EasyExonPrimer is written in Perl and uses Primer3 to design PCR primers based on the genome builds and annotation databases available at the University of California, Santa Cruz (UCSC) Genome Browser database (http://genome.ucsc.edu/). It masks repeats and known single nucleotide polymorphism (SNP) sites in the genome and designs standardised primers using optimised conditions. Users can input genes by RefSeq mRNA ID, gene name or keyword. The primer design is optimised for large-scale resequencing of exons. For exons larger than 1 kb, the user has the option of breaking the exon sequence down into overlapping smaller fragments. All primer pairs are then verified using the In-Silico PCR software to test for uniqueness in the genome. We have designed >1000 pairs of primers for 90 genes; 95% of the primer pairs successfully amplified exon sequences under standard PCR conditions without requiring further optimisation. AVAILABILITY: EasyExonPrimer is available from http://129.43.22.27/~primer/. The source code is also available upon request. CONTACT: Xiaolin Wu (forestwu@mail.nih.gov).     

Development of a single tube 640-plex genotyping method for detection of nucleic acid variations on microarrays

Detection of DNA sequence variation is critical to biomedical applications, including disease genetic identification, diagnosis and treatment, drug discovery and forensic analysis. Here, we describe an arrayed primer extension-based genotyping method (APEX-2) that allows multiplex (640-plex) DNA amplification and detection of single nucleotide polymorphisms (SNPs) and mutations on microarrays via four-color single-base primer extension. The founding principle of APEX-2 multiplex PCR requires two oligonucleotides per SNP/mutation to generate amplicons containing the position of interest. The same oligonucleotides are then subsequently used as immobilized single-base extension primers on a microarray. The method described here is ideal for SNP or mutation detection analysis, molecular diagnostics and forensic analysis. This robust genetic test has minimal requirements: two primers, two spots on the microarray and a low cost four-color detection system for the targeted site; and provides an advantageous alternative to high-density platforms and low-density detection systems.     

A simple procedure for the analysis of single nucleotide polymorphisms facilitates map-based cloning in Arabidopsis

We developed a modified allele-specific PCR procedure for assaying single nucleotide polymorphisms (SNPs) and used the procedure (called SNAP for single-nucleotide amplified polymorphisms) to generate 62 Arabidopsis mapping markers. SNAP primers contain a single base pair mismatch within three nucleotides from the 3' end of one allele (the specific allele) and in addition have a 3' mismatch with the nonspecific allele. A computer program called SNAPER was used to facilitate the design of primers that generate at least a 1,000-fold difference in the quantity of the amplification products from the specific and nonspecific SNP alleles. Because SNAP markers can be readily assayed by electrophoresis on standard agarose gels and because a public database of over 25,000 SNPs is available between the Arabidopsis Columbia and Landsberg erecta ecotypes, the SNAP method greatly facilitates the map-based cloning of Arabidopsis genes defined by a mutant phenotype.     

A simple method to score single nucleotide polymorphisms based on allele‐specific PCR and primer‐induced fragment‐length variation

We describe a simple protocol to genotype single nucleotide polymorphisms (SNPs), which combines allele‐specific polymerase chain reaction (PCR) with fragment‐length analysis. Three primers are used in the PCR: two allele‐specific forward primers with a length‐difference and one reverse primer. The forward primers induce a length‐difference between the SNP‐variants, which can be assessed with standard fragment‐length analyses. We designed primers for 21 SNPs, and codominance was achieved for 76% of these SNPs. An inexpensive and flexible laser‐detection scoring protocol can be achieved with multiplex scoring and by incorporating the M13(‐21) genotyping method.