Aptamer Selection Based on G4-Forming Promoter Region

We developed a method for aptamer identification without in vitro selection. We have previously obtained several aptamers, which may fold into the G-quadruplex (G4) structure, against target proteins; therefore, we hypothesized that the G4 structure would be an excellent scaffold for aptamers to recognize the target protein. Moreover, the G4-forming sequence contained in the promoter region of insulin can reportedly bind to insulin. We thus expected that G4 DNAs, which are contained in promoter regions, could act as DNA aptamers against their gene products. We designated this aptamer identification method as “G4 promoter-derived aptamer selection (G4PAS).” Using G4PAS, we identified vascular endothelial growth factor (VEGF)165, platelet-derived growth factor-AA (PDGF)-AA, and RB1 DNA aptamers. Surface plasmon resonance (SPR) analysis revealed that the dissociation constant (K _d) values of VEGF165, PDGF-AA, and RB1 DNA aptamers were 1.7 × 10⁻⁷ M, 6.3 × 10⁻⁹ M, and 4.4 × 10⁻⁷ M, respectively. G4PAS is a simple and rapid method of aptamer identification because it involves only binding analysis of G4 DNAs to the target protein. In the human genome, over 40% of promoters contain one or more potential G4 DNAs. G4PAS could therefore be applied to identify aptamers against target proteins that contain G4 DNAs on their promoters.     

In Vitro Selection and Characterization of Cellulose-Binding RNA Aptamers Using isothermal Amplification

We sought to create new cellulose-binding RNA aptamers for use as modular components in the engineering of complex functional nucleic acids. We designed our in vitro selection strategy to incorporate self-sustained sequence replication (3SR), which is an isothermal nucleic acid amplification protocol that allows for the rapid amplification of RNAs with little manipulation. The best performing aptamer representative was chosen for reselection and further optimization. The aptamer exhibits robust binding of cellulose in both the powdered and paper form, but did not show any significant binding of closely related polysaccharides. The minimal cellulose-binding RNA aptamer also can be grafted onto other RNAs to permit the isolation of RNAs from complex biochemical mixtures via cellulose affinity chromatography. This was demonstrated by fusing the aptamer to a glmS ribozyme sequence, and selectively eluting ribozyme cleavage products from cellulose using glucosamine 6-phosphate to activate glmS ribozyme function.     

In vitro selection and characterization of cellulose-binding RNA aptamers using isothermal amplification

We sought to create new cellulose-binding RNA aptamers for use as modular components in the engineering of complex functional nucleic acids. We designed our in vitro selection strategy to incorporate self-sustained sequence replication (3SR), which is an isothermal nucleic acid amplification protocol that allows for the rapid amplification of RNAs with little manipulation. The best performing aptamer representative was chosen for reselection and further optimization. The aptamer exhibits robust binding of cellulose in both the powdered and paper form, but did not show any significant binding of closely related polysaccharides. The minimal cellulose-binding RNA aptamer also can be grafted onto other RNAs to permit the isolation of RNAs from complex biochemical mixtures via cellulose affinity chromatography. This was demonstrated by fusing the aptamer to a glmS ribozyme sequence, and selectively eluting ribozyme cleavage products from cellulose using glucosamine 6-phosphate to activate glmS ribozyme function.     

Array-based evolution of DNA aptamers allows modelling of an explicit sequence-fitness landscape

Mapping the landscape of possible macromolecular polymer sequences to their fitness in performing biological functions is a challenge across the biosciences. A paradigm is the case of aptamers, nucleic acids that can be selected to bind particular target molecules. We have characterized the sequence-fitness landscape for aptamers binding allophycocyanin (APC) protein via a novel Closed Loop Aptameric Directed Evolution (CLADE) approach. In contrast to the conventional SELEX methodology, selection and mutation of aptamer sequences was carried out in silico, with explicit fitness assays for 44 131 aptamers of known sequence using DNA microarrays in vitro. We capture the landscape using a predictive machine learning model linking sequence features and function and validate this model using 5500 entirely separate test sequences, which give a very high observed versus predicted correlation of 0.87. This approach reveals a complex sequence-fitness mapping, and hypotheses for the physical basis of aptameric binding; it also enables rapid design of novel aptamers with desired binding properties. We demonstrate an extension to the approach by incorporating prior knowledge into CLADE, resulting in some of the tightest binding sequences.     

Selection of a DNA aptamer that binds 8-OHdG using GMP-agarose

DNA aptamers, which bind specific molecule, such as 8-OHdG, with high affinity were investigated using an in vitro selection strategy called systematic evolution of ligands by exponential enrichment (SELEX). However, 8-OHdG was difficult to immobilize on a carrier for SELEX. Therefore, a DNA aptamer binding to 8-OHdG was selected using GMP-agarose as an analogue from a library of about 4⁶⁰ random ssDNA sources. As a result, three aptamer candidates were selected. Among the selected DNA aptamers, the No. 22 DNA aptamer exhibited a high affinity for 8-OHdG. The dissociation constant, K_D, of No. 22 DNA aptamer was on the order of 0.1 μmol/L. This result suggests that using an analogue will be a useful new SELEX method for obtaining various aptamers that are difficult to immobilize on a matrix.     

Bioinformatic Analysis of the Contribution of Primer Sequences to Aptamer Structures

Aptamers are nucleic acid molecules selected in vitro to bind a particular ligand. While numerous experimental studies have examined the sequences, structures, and functions of individual aptamers, considerably fewer studies have applied bioinformatics approaches to try to infer more general principles from these individual studies. We have used a large Aptamer Database to parse the contributions of both random and constant regions to the secondary structures of more than 2000 aptamers. We find that the constant, primer-binding regions do not, in general, contribute significantly to aptamer structures. These results suggest that (a) binding function is not contributed to nor constrained by constant regions; (b) in consequence, the landscape of functional binding sequences is sparse but robust, favoring scenarios for short, functional nucleic acid sequences near origins; and (c) many pool designs for the selection of aptamers are likely to prove robust.     

Dual-colour imaging of RNAs using quencher- and fluorophore-binding aptamers

In order to gain deeper insight into the functions and dynamics of RNA in cells, the development of methods for imaging multiple RNAs simultaneously is of paramount importance. Here, we describe a modular approach to image RNA in living cells using an RNA aptamer that binds to dinitroaniline, an efficient general contact quencher. Dinitroaniline quenches the fluorescence of different fluorophores when directly conjugated to them via ethylene glycol linkers by forming a non-fluorescent intramolecular complex. Since the binding of the RNA aptamer to the quencher destroys the fluorophore-quencher complex, fluorescence increases dramatically upon binding. Using this principle, a series of fluorophores were turned into fluorescent turn-on probes by conjugating them to dinitroaniline. These probes ranged from fluorescein-dinitroaniline (green) to TexasRed-dinitroaniline (red) spanning across the visible spectrum. The dinitroaniline-binding aptamer (DNB) was generated by in vitro selection, and was found to bind all probes, leading to fluorescence increase in vitro and in living cells. When expressed in E. coli, the DNB aptamer could be labelled and visualized with different-coloured fluorophores and therefore it can be used as a genetically encoded tag to image target RNAs. Furthermore, combining contact-quenched fluorogenic probes with orthogonal DNB (the quencher-binding RNA aptamer) and SRB-2 aptamers (a fluorophore-binding RNA aptamer) allowed dual-colour imaging of two different fluorescence-enhancing RNA tags in living cells, opening new avenues for studying RNA co-localization and trafficking.     

DNA-aptamer/protein interaction as a cause of apoptosis and arrest of proliferation in Ehrlich ascites adenocarcinoma cells

New prospects for the applications of single-stranded DNA and RNA as therapeutic agents have been discovered in the recent years. Aptamers are the oligonucleotides that bind to their targets with high affinity and specificity due to the well-defined tertiary structures and spatial charge distribution. Aptamers can be selected for any molecules, virus particles, bacteria, cells, and tissues. They have a wide range of applications from target identification to drug delivery. Aptamers themselves can affect various cell functions by affecting certain proteins and receptors. Here, we present the technique for selecting aptamers with antitumor activity in cancer cell cultures and identifying their target proteins by mass spectrometry analysis. The evolved aptamers showed the following antitumor properties: AS-14 (K _d = 3.8 nM) induced apoptosis (phosphatidylserine translocation determined with Annexin V Alexa Fluor 488) and AS-9 (K _d = 0.75 nM) stopped proliferation (as determined with CellTrace? Far Red DDAO-SE) in the culture of Ehrlich ascites adenocarcinoma cells. Using high performance liquid chromatography and high resolution tandem mass spectrometry, we have identified the proteins affected by the AS-14 and AS-9 aptamers. One of the most likely targets for AS-14 was filamin A, which is involved in metastasis formation, tumor development, and cell proliferation. According to mass spectrometry data, the AS-9 aptamer influences the α-subunit of mitochondrial ATP synthase, the key component of mitochondrial oxidative phosphorylation, stimulation of which leads to tumor growth suppression. Thus, mass spectrometry data confirmed the results of the experiments on cell cultures showing that the aptamer binding to specific protein targets causes apoptosis and stops proliferation of cancer cells. However, the mechanisms of action of aptamers in vitro and in vivo are not clear enough and still need to be determined. Our study opens up new possibilities for creation of non-toxic drugs based on DNA aptamers for targeted anticancer therapy.     

G-quadruplex-forming aptamer enhances the peroxidase activity of myoglobin against luminol

Aptamers can control the biological functions of enzymes, thereby facilitating the development of novel biosensors. While aptamers that inhibit catalytic reactions of enzymes were found and used as signal transducers to sense target molecules in biosensors, no aptamers that amplify enzymatic activity have been identified. In this study, we report G-quadruplex (G4)-forming DNA aptamers that upregulate the peroxidase activity in myoglobin specifically for luminol. Using in vitro selection, one G4-forming aptamer that enhanced chemiluminescence from luminol by myoglobin''s peroxidase activity was discovered. Through our strategy—in silico maturation, which is a genetic algorithm-aided sequence manipulation method, the enhancing activity of the aptamer was improved by introducing mutations to the aptamer sequences. The best aptamer conserved the parallel G4 property with over 300-times higher luminol chemiluminescence from peroxidase activity more than myoglobin alone at an optimal pH of 5.0. Furthermore, using hemin and hemin-binding aptamers, we demonstrated that the binding property of the G4 aptamers to heme in myoglobin might be necessary to exert the enhancing effect. Structure determination for one of the aptamers revealed a parallel-type G4 structure with propeller-like loops, which might be useful for a rational design of aptasensors utilizing the G4 aptamer-myoglobin pair.     

Aptamer-based depletion of small molecular contaminants: A case study using ochratoxin A

Based on the increasing demand for detection and depletion of small molecules like mycotoxins or pesticides in food, water, or pharmaceuticals, aptamers are gaining more importance as sensitive, specific-depletion molecules. Here, we present an aptamer-based method for depletion of ochratoxin A (OTA) as a model system and show the advantages and the limitations of aptamers in the depletion of small molecular contaminants. OTA is a mycotoxin produced by various Penicillium and Aspergillus strains and is often found in grain and grain derivatives. We immobilized a well-described DNA aptamer against OTA on an agarose gel and used the column as a clean-up system. The aptamer shows a high specificity and sensitivity for OTA: Ochratoxin B, a molecule similar to OTA, was not bound by the aptamer; and a control oligonucleotide was not able to bind OTA. After optimizing the process for better economic feasibility, the column could be used for several times without loss of aptamer activity. We investigated the location of immobilized aptamer within the gel using fluorescent-labeled aptamers. Furthermore, beer samples spiked with OTA were used to investigate aptamer activity in complex samples. Using these complex samples we have observed a significant loss of aptamer activity. We have further investigated this limitation by performing microscale thermophoresis experiments to determine the KD values of the aptamer in different complex samples like beer, coffee, juice and wine. Our results indicate that the applicability of aptamers to real processes is currently restricted by the selection buffer used during its selection process (SELEX). We therefore suggest using conditions closer to those of the later application of the aptamer during future SELEX experiments.     

What defines a synthetic riboswitch? – Conformational dynamics of ciprofloxacin aptamers with similar binding affinities but varying regulatory potentials

Among the many in vitro-selected aptamers derived from SELEX protocols, only a small fraction has the potential to be applied for synthetic riboswitch engineering. Here, we present a comparative study of the binding properties of three different aptamers that bind to ciprofloxacin with similar K_D values, yet only two of them can be applied as riboswitches. We used the inherent ligand fluorescence that is quenched upon binding as the reporter signal in fluorescence titration and in time-resolved stopped-flow experiments. Thus, we were able to demonstrate differences in the binding kinetics of regulating and non-regulating aptamers. All aptamers studied underwent a two-step binding mechanism that suggests an initial association step followed by a reorganization of the aptamer to accommodate the ligand. We show that increasing regulatory potential is correlated with a decreasing back-reaction rate of the second binding step, thus resulting in a virtually irreversible last binding step of regulating aptamers. We suggest that a highly favoured structural adaption of the RNA to the ligand during the final binding step is essential for turning an aptamer into a riboswitch. In addition, our results provide an explanation for the fact that so few aptamers with regulating capacity have been found to date. Based on our data, we propose an adjustment of the selection protocol for efficient riboswitch detection.     

Selection of DNA aptamers against epidermal growth factor receptor with high affinity and specificity

Epidermal growth factor receptor (EGFR/HER1/c-ErbB1), is overexpressed in many solid cancers, such as epidermoid carcinomas, malignant gliomas, etc. EGFR plays roles in proliferation, invasion, angiogenesis and metastasis of malignant cancer cells and is the ideal antigen for clinical applications in cancer detection, imaging and therapy. Aptamers, the output of the systematic evolution of ligands by exponential enrichment (SELEX), are DNA/RNA oligonucleotides which can bind protein and other substances with specificity. RNA aptamers are undesirable due to their instability and high cost of production. Conversely, DNA aptamers have aroused researcher’s attention because they are easily synthesized, stable, selective, have high binding affinity and are cost-effective to produce. In this study, we have successfully identified DNA aptamers with high binding affinity and selectivity to EGFR. The aptamer named TuTu22 with K_d 56 ± 7.3 nM was chosen from the identified DNA aptamers for further study. Flow cytometry analysis results indicated that the TuTu22 aptamer was able to specifically recognize a variety of cancer cells expressing EGFR but did not bind to the EGFR-negative cells. With all of the aforementioned advantages, the DNA aptamers reported here against cancer biomarker EGFR will facilitate the development of novel targeted cancer detection, imaging and therapy.     

Post-ExSELEX stabilization of an unnatural-base DNA aptamer targeting VEGF165 toward pharmaceutical applications

A new technology, genetic alphabet expansion using artificial bases (unnatural bases), has created high-affinity DNA ligands (aptamers) that specifically bind to target proteins by ExSELEX (genetic alphabet Expansion for Systematic Evolution of Ligands by EXponential enrichment). We recently found that the unnatural-base DNA aptamers can be stabilized against nucleases, by introducing an extraordinarily stable, unique hairpin DNA (mini-hairpin DNA) and by reinforcing the stem region with G–C pairs. Here, to establish this aptamer generation method, we examined the stabilization of a high-affinity anti-VEGF₁₆₅ unnatural-base DNA aptamer. The stabilized aptamers displayed significantly increased thermal and nuclease stabilities, and furthermore, exhibited higher affinity to the target. As compared to the well-known anti-VEGF₁₆₅ RNA aptamer, pegaptanib (Macugen), our aptamers did not require calcium ions for binding to VEGF₁₆₅. Biological experiments using cultured cells revealed that our stabilized aptamers efficiently inhibited the interaction between VEGF₁₆₅ and its receptor, with the same or slightly higher efficiency than that of the pegaptanib RNA aptamer. The development of cost-effective and calcium ion-independent high-affinity anti-VEGF₁₆₅ DNA aptamers encourages further progress in diagnostic and therapeutic applications. In addition, the stabilization process provided additional information about the key elements required for aptamer binding to VEGF₁₆₅.     

Sephadex-binding RNA ligands: rapid affinity purification of RNA from complex RNA mixtures

Sephadex-binding RNA ligands (aptamers) were obtained through in vitro selection. They could be classified into two groups based on their consensus sequences and the aptamers from both groups showed strong binding to Sephadex G-100. One of the highest affinity aptamers, D8, was chosen for further characterization. Aptamer D8 bound to dextran B512, the soluble base material of Sephadex, but not to isomaltose, isomaltotriose and isomaltotetraose, suggesting that its optimal binding site might consist of more than four glucose residues linked via alpha-1,6 linkages. The aptamer was very specific to the Sephadex matrix and did not bind appreciably to other supporting matrices, such as Sepharose, Sephacryl, cellulose or pustulan. Using Sephadex G-100, the aptamer could be purified from a complex mixture of cellular RNA, giving an enrichment of at least 60 000-fold, compared with a non-specific control RNA. These RNA aptamers can be used as affinity tags for RNAs or RNA subunits of ribonucleoproteins to allow rapid purification from complex mixtures of RNA using only Sephadex.     

Chimeric aptamers in cancer cell-targeted drug delivery

Aptamers are single-stranded structured oligonucleotides (DNA or RNA) that can bind to a wide range of targets (“apatopes”) with high affinity and specificity. These nucleic acid ligands, generated from pools of random-sequence by an in vitro selection process referred to as systematic evolution of ligands by exponential enrichment (SELEX), have now been identified as excellent tools for chemical biology, therapeutic delivery, diagnosis, research, and monitoring therapy in real-time imaging. Today, aptamers represent an interesting class of modern pharmaceuticals which with their low immunogenic potential mimic extend many of the properties of monoclonal antibodies in diagnostics, research, and therapeutics. More recently, chimeric aptamer approach employing many different possible types of chimerization strategies has generated more stable and efficient chimeric aptamers with aptamer–aptamer, aptamer–nonaptamer biomacromolecules (siRNAs, proteins) and aptamer–nanoparticle chimeras. These chimeric aptamers when conjugated with various biomacromolecules like locked nucleic acid (LNA) to potentiate their stability, biodistribution, and targeting efficiency, have facilitated the accurate targeting in preclinical trials. We developed LNA-aptamer (anti-nucleolin and EpCAM) complexes which were loaded in iron-saturated bovine lactofeerin (Fe-blf)-coated dopamine modified surface of superparamagnetic iron oxide (Fe₃O₄) nanoparticles (SPIONs). This complex was used to deliver the specific aptamers in tumor cells in a co-culture model of normal and cancer cells. This review focuses on the chimeric aptamers, currently in development that are likely to find future practical applications in concert with other therapeutic molecules and modalities.     

From Ugly Duckling to Swan: Unexpected Identification from Cell-SELEX of an Anti-Annexin A2 Aptamer Targeting Tumors

Background

Cell-SELEX is now widely used for the selection of aptamers against cell surface biomarkers. However, despite negative selection steps using mock cells, this method sometimes results in aptamers against undesirable targets that are expressed both on mock and targeted cells. Studying these junk aptamers might be useful for further applications than those originally envisaged.

Methodology/Principal Findings

Cell-SELEX was performed to identify aptamers against CHO-K1 cells expressing human Endothelin type B receptor (ET_BR). CHO-K1 cells were used for negative selection of aptamers. Several aptamers were identified but no one could discriminate between both cell lines. We decided to study one of these aptamers, named ACE4, and we identified that it binds to the Annexin A2, a protein overexpressed in many cancers. Radioactive binding assays and flow cytometry demonstrated that the aptamer was able to bind several cancer cell lines from different origins, particularly the MCF-7 cells. Fluorescence microscopy revealed it could be completely internalized in cells in 2 hours. Finally, the tumor targeting of the aptamer was evaluated in vivo in nude mice xenograft with MCF-7 cells using fluorescence diffuse optical tomography (fDOT) imaging. Three hours after intravenous injection, the aptamer demonstrated a significantly higher uptake in the tumor compared to a scramble sequence.

Conclusions/Significance

Although aptamers could be selected during cell-SELEX against other targets than those initially intended, they represent a potential source of ligands for basic research, diagnoses and therapy. Here, studying such aptamers, we identify one with high affinity for Annexin A2 that could be a promising tool for biomedical application.     

Conservative secondary structure motif of streptavidin-binding aptamers generated by different laboratories

Aptamers that are selected in vitro from random pools of DNA or RNA molecules by SELEX (Systematic evolution of ligands by exponential enrichment) technique have been extensively explored for analytical and biomedical applications. Although many aptamers with high affinity and specificity against specific ligands have been reported, there is still a lack of well characterized DNA aptamers. Here we report the selection of a group of aptamer candidates (85 mer) against streptavidin. Through comparing the predicted secondary structures of all the candidates, a conservative bulge-hairpin structure section (about 29 mer) was found, and then it was determined to be the binding motif to streptavidin. This binding motif was further discovered to also exist in streptavidin-binding aptamers (SBAs) selected by three other laboratories using different methods. The primary sequences of this secondary structure motif are very different, only several nucleotides in the loop and bulge area are critical for binding and other nucleotides are variable. The streptavidin binding of all the SBAs could be competed by biotin implying that they bind to the same site on streptavidin. These results suggest that the evolution of SBA is predominated by specific groups on streptavidin. The highly variable sequence composition of streptavidin-binding aptamer would make the design of aptameric sensor or device based on streptavidin more flexible and easy.     

Selection of DNA aptamers against insulin and construction of an aptameric enzyme subunit for insulin sensing

We selected DNA aptamers against insulin and developed an aptameric enzyme subunit (AES) for insulin sensing. The insulin-binding aptamers were identified from a single-strand DNA library which was expected to form various kinds of G-quartet structures. In vitro selection was carried out by means of aptamer blotting, which visualizes the oligonucleotides binding to the target protein at each round. After the 6th round of selection, insulin-binding aptamers were identified. These identified insulin-binding aptamers had a higher binding ability than the insulin-linked polymorphic region (ILPR) oligonucleotide, which can be called a "natural" insulin-binding DNA aptamer. The circular-dichroism (CD) spectrum measurement of the identified insulin-binding DNA aptamers indicated that the aptamers would fold into a G-quartet structure. We also developed an AES by connecting the best identified insulin-binding aptamer with the thrombin-inhibiting aptamer. Using this AES, we were able to detect insulin by measuring the thrombin enzymatic activity without bound/free separation.