实时荧光定量PCR检测球孢白僵菌热休克蛋白基因hsp70在几种胁迫条件下的表达

本研究运用Realtime-PCR技术,对球孢白僵菌Beauveria bassiana hsp70基因在不同胁迫条件下的表达情况进行了检测。从mRNA转录水平探讨了不同胁迫条件对球孢白僵菌hsp70基因表达的影响。结果表明:38℃高温胁迫下,30min时表达量达到最高峰,为对照样品的10.18倍。随后表达量开始下降,至180min时,其表达量降为最低,为对照样品的2.85倍;4℃低温胁迫下,2h检测到hsp70的表达量下降至最低点,为对照样品的0.25倍。随后表达量开始回升,至10h表达量始终维持在对照样品的1.4-1.5倍左右;紫外胁迫下(波长253.7nm),3min后hsp70的表达量快速上升至最高峰,为对照样品的2.33倍。随后表达量迅速下降,至60min表达量始终维持在对照样品的0.2倍左右。因此推测,hsp70基因在球孢白僵菌抵抗高温、低温和紫外三种胁迫方面都可能具有重要作用。同时研究结果也表明,球孢白僵菌hsp70基因启动子在逆境下可引导基因高效表达,因而在抗逆工程菌株构建方面可能具有重要的应用价值。     

A comparison of heat shock protein genes from cultured cells of the cabbage armyworm, Mamestra brassicae, in response to heavy metals

Heat shock protein (HSP) genes, hsp90, hsp70, hsc70, hsp20.7, and hsp19.7, were cloned and sequenced from cultured cells of the cabbage armyworm, Mamestra brassicae. Analyses of the cDNA sequences revealed open reading frames of 2,151, 1,914, 1,962, 540, and 465 bp in lengths, which encode proteins with calculated molecular weights of 82.5, 69.9, 71.6, 20.7, and 19.7 kDa, respectively. An increased expression was observed in all five genes after exposure to a high temperature. The induction of gene expression was not observed during a low temperature exposure, but was observed when the cells were recovered at ambient temperature. Expression of hsp90, hsp70, and hsp20.7 was induced after exposure to 2 microM of cadmium, while the minimum cadmium concentration for induction of hsp19.7 was 5 microM. The induction of hsp90 expression was somewhat masked by basal levels of expression. Only hsp20.7 expression was induced by exposure to copper. Lead did not induce expression of any of the HSP genes tested. Cadmium-induced up-regulation of hsp70 expression was lasted longer than heat-induced one. These results suggest that hsp70 could be useful to assess the cellular distress or injury induced by cadmium.     

Xenopus hsp 70 genes are constitutively expressed in injected oocytes.

Xenopus heat-shock genes are transiently heat-inducible in somatic cells, but they are also subject to a long-term developmental control in oogenesis and early embryogenesis. In order to understand whether different genes or different promoter elements are involved in the two types of control, several genomic clones coding for Xenopus heat-shock proteins, hsp 70 and hsp 30, were isolated, characterised and tested for expression in oocytes and COS cells. Three isolated hsp 70 genes are nearly identical in their promoter and mRNA leader sequences, indicating that there is only one type of hsp 70 gene. These promoters contain a consensus sequence element (CT-GAA--TTC-AG) upstream of the TATA-box, which is presumably required for their transient heat-inducibility. The two isolated hsp 30 genes show 5'-flanking sequences similar to each other, except that one of them shows a homology disruption precisely around the consensus sequence element. The same gene contains a frameshift mutation in the protein coding part and, since it cannot be expressed after introduction into oocytes or COS cells, it is probably a pseudogene. The other hsp 30 gene is strongly heat-inducible in injected oocytes or transfected COS cells. In contrast, the hsp 70 genes are strongly heat-inducible in COS cells, but their expression is highly efficient in injected oocytes at the normal temperature and is not increased during heat shock. This represents correct cell type-specific regulation of a cloned reintroduced gene, since the endogenous hsp 70 genes are constitutively activated during oogenesis, leading to the accumulation of stored hsp 70 mRNA in oocytes.     

Expression of microinjected hsp 70/CAT and hsp 30/CAT chimeric genes in developing Xenopus laevis embryos

The expression of microinjected chimeric genes containing Drosophila hsp 70 and Xenopus hsp 70 and hsp 30 promoters linked to the reporter gene coding for bacterial chloramphenicol acetyltransferase (CAT) was examined during early development of Xenopus laevis. Heat-inducible expression of fusion genes containing either the Drosophila hsp 70 promoter (1100 bp) or the Xenopus hsp 70 promoter (750 bp) was first detectable after the midblastula stage of development. This coincides with the embryonic stage at which the endogenous hsp 70 gene is first heat-inducible. A Xenopus hsp 30/CAT fusion gene containing 350 bp of promoter sequences was also heat-inducible after the midblastula stage unlike the endogenous hsp 30 genes which were not heat-inducible until the early tailbud stage (stage 23-24). Sequences that are present within either the coding or 3' region of the hsp 30 clone do not cause the microinjected hsp 30 gene to be developmentally regulated in a normal manner. Additionally, microinjected hsp 30 gene sequences have no effect on the developmental regulation of endogenous hsp 30 genes which continue to be activated at the tailbud stage of development. Our data suggest, that an inhibitory system, which may control the expression of the endogenous hsp 30 gene during development, does not regulate the expression of the injected hsp 30 gene.     

Simultaneous activation of heat shock protein (hsp 70) and nucleolin genes during in vivo and in vitro prereplicative stages of rat hepatocytes.

Rapidly growing cells usually have high levels of ribosome biogenesis. The sequential expression of protooncogenes during the transition of quiescent hepatocytes to the replicative stage was assumed to be followed by activation of cellular genes related to cell growth such as ribosome biosynthesis. First, the expression of major nucleolar protein (nucleolin or C23) and major heat-shock protein (hsp 70) genes was examined during rat liver regeneration. hsp 70 may function in cell growth and has a characteristic nucleolar location after heat shock. Both nucleolin and hsp 70 mRNA began to increase simultaneously after peaks of c-fos and c-myc, showed a peak 6 h after partial hepatectomy, and declined to the control levels around 20 h. That is, the peaks of nucleolin and hsp 70 mRNA precede the peak of ribosome formation (12-20 h) and DNA replication (24 h). Second, the behavior of nucleolin and hsp 70 mRNA was examined in primary cultured hepatocytes during their G0-G1 transition. Although the amounts of c-myc mRNA reached a plateau around 20 h after the initiation of culture and remained at these levels, DNA synthesis has never been found to start without the addition of EGF and insulin to this system. Both nucleolin and hsp 70 mRNA began to increase at around 20 h (prereplicative stage) and simultaneously decreased in inverse proportion to DNA synthesis induced by these growth factors. Thus, it is possible that the simultaneous enhancement of nucleolin and hsp 70 genes as described above is not merely coincidental, but is important biologically during the transition of quiescent hepatocytes to proliferative cells.     

嗜热四膜虫五个hsp70基因的表达分析

鉴定得到嗜热四膜虫13个含有完整保守结构域的hsp70基因,对其中5个高度相似且无内含子的hsp70基因进行表达分析。在37、39和41℃热激条件下,实时荧光定量PCR结果表明,hsp70-2基因对热激响应最敏感。在四膜虫生长、饥饿和接合生殖这3种生理或发育状态下,Microarray结果显示,hsp70-4基因恒定且高表达;在热激条件下,hsp70-4基因的表达水平随着温度的升高而略微增加,证实hsp70-4基因为热休克相关蛋白hsc70基因;克隆的hsp70-4基因全长2208bp,开放阅读框长1959bp,编码653个氨基酸。Microarray结果提示,hsp70-3可能参与四膜虫饥饿早期(0～12h)的耐受和接合生殖后期(6～10h)的新大小核形成,老大核凋亡等事件;hsp70-5可能参与四膜虫饥饿晚期(12～15h)的耐受和接合生殖早期(0～6h)的小核减数分裂、小核交换和原核(pronuclear)融合事件。Blast2GO分析表明,与hsp70-3和hsp70-5共表达的基因分别参与不同的生物学过程,进一步反映了hsp70-3和hsp70-5这两个基因在功能上是存在差异的。     

Heat shock proteins affect RNA processing during the heat shock response of Saccharomyces cerevisiae.

In the yeast Saccharomyces cerevisiae, the splicing of mRNA precursors is disrupted by a severe heat shock. Mild heat treatments prior to severe heat shock protect splicing from disruption, as was previously reported for Drosophila melanogaster. In contrast to D. melanogaster, protein synthesis during the pretreatment is not required to protect splicing in yeast cells. However, protein synthesis is required for the rapid recovery of splicing once it has been disrupted by a sudden severe heat shock. Mutations in two classes of yeast hsp genes affect the pattern of RNA splicing during the heat shock response. First, certain hsp70 mutants, which overproduce other heat shock proteins at normal temperatures, show constitutive protection of splicing at high temperatures and do not require pretreatment. Second, in hsp104 mutants, the recovery of RNA splicing after a severe heat shock is delayed compared with wild-type cells. These results indicate a greater degree of specialization in the protective functions of hsps than has previously been suspected. Some of the proteins (e.g., members of the hsp70 and hsp82 gene families) help to maintain normal cellular processes at higher temperatures. The particular function of hsp104, at least in splicing, is to facilitate recovery of the process once it has been disrupted.     

Cloning and nucleotide sequencing of three heat shock protein genes (hsp90, hsc70, and hsp19.5) from the diamondback moth, Plutella xylostella (L.) and their expression in relation to developmental stage and temperature

Heat shock protein genes, hsp90, hsc70, and hsp19.5, were cloned and sequenced from the diamondback moth, Plutella xylostella (L.) by RT-PCR and RACE method. The cDNA sequence analysis of hsp90 and hsp19.5 revealed open reading frames (ORFs) of 2,151 and 522 bp in length, which encode proteins with calculated molecular weights of 82.4 and 19.5 kDa, respectively. Analysis of cDNA from hsc70 revealed an ORF of 1,878 bp coding a protein with a calculated molecular weight of 69.3 kDa. Furthermore, the analysis of genomic DNA from hsc70 confirmed the presence of introns while no introns were apparent in hsp90 and hsp19.5. Southern blot analysis suggested the presence of multiple copies of each gene family in the DBM genome. Detectable expression of hsp19.5 was observed at the pupal stage while expression of hsp90 and hsc70 was detected at both pupal and adult stages. At adult stage, females showed a higher expression of hsp90 and hsc70 than males. An increased expression was observed in all three genes after exposure to a high temperature in both sexes. These results suggest that in addition to a heat shock response, these HSP genes might be involved in other functions during the course of development in DBM.