Adsorption of HSA, IgG and laminin-1 on model titania surfaces--effects of glow discharge treatment on competitively adsorbed film composition

This study investigated the effect of glow discharge treatment of titania surfaces on plasma protein adsorption, by means of ellipsometry and mechanically assisted SDS elution. The adsorption and film elution of three plasma proteins, viz. human serum albumin (HSA), human immunoglobulin G (IgG) and laminin-1, as well as competitive adsorption from a mixture of the three proteins, showed that the adsorbed amount of the individual proteins after 1 h increased in the order HSA 相似文献   

Adsorption of HSA,IgG and laminin-1 on model titania surfaces – effects of glow discharge treatment on competitively adsorbed film composition

This study investigated the effect of glow discharge treatment of titania surfaces on plasma protein adsorption, by means of ellipsometry and mechanically assisted SDS elution. The adsorption and film elution of three plasma proteins, viz. human serum albumin (HSA), human immunoglobulin G (IgG) and laminin-1, as well as competitive adsorption from a mixture of the three proteins, showed that the adsorbed amount of the individual proteins after 1 h increased in the order HSA <IgG <laminin-1 ≤ protein mixture. Film elutability showed that 30 min of SDS interaction resulted in almost complete removal of adsorbed films. No difference in the total adsorbed amounts of individual proteins, or from the mixture, was observed between untreated and glow discharge treated titania surfaces. However, the composition of the adsorbed films from the mixture differed between the untreated and glow discharge treated substrata. On glow discharge-treated titania the fraction of HSA increased, the fraction of laminin-1 decreased and the fraction of IgG was unchanged compared to the adsorption on the untreated titania, which was attributed to protein–protein interactions and competitive/associative adsorption behaviour.     

An ellipsometric study of the antigen-antibody interaction in the interphase solid/solution area]

Ellipsometric studies have proved that monoclonal immunoglobulin G(IgG) against gamma-interferon (gamma-INF) and immunoglobulin fraction (Ig-fraction) of rabbit blood serum against human serum albumin (HSA) are adsorbed according to the Langmuir model on the surfaces of mirror plates of covalently modified gamma-INF or HSA, respectively. The maximum surface concentrations (Tmax) and equilibrium adsorption constants (K) for IgG and Ig-fraction are equal to 2.57 pmol/cm2 and 2 x 10(7) M-1, 3.3 mg/m2 and 0.1 cm3/micrograms, respectively. The additional treatment of gamma-INF modified surfaces with Tween-20 leads to an increase of K IgG ut to 2.7 x 10(-7) M-1 while Tmax decreases up to 1.12 pmol/cm2 which is conditioned by the blocking of protein non-specific binding sites. The role of specific and non-specific interactions of IgG and Ig-fraction with covalently immobilized antigens was studied at antibody-antigen mixture adsorption. The necessity to apply this method to quantitative determination of gamma-IHF and HSA in solutions was proved.     

Competitive protein adsorption on polysaccharide and hyaluronate modified surfaces

Adsorption of bovine serum albumin (BSA) and fibrinogen (Fg) was measured on six distinct bare and dextran- and hyaluronate-modified silicon surfaces created using two dextran grafting densities and three hyaluronic acid (HA) sodium salts derived from human umbilical cord, rooster comb and Streptococcus zooepidemicus. Film thickness and surface morphology depended on the HA molecular weight and concentration. BSA coverage was enhanced on surfaces in competitive adsorption of BSA:Fg mixtures. Dextranization differentially reduced protein adsorption onto surfaces based on oxidation state. Hyaluronization was demonstrated to provide the greatest resistance to protein coverage, equivalent to that of the most resistant dextranized surface. Resistance to protein adsorption was independent of the type of HA utilized. With changing bulk protein concentration from 20 to 40 μg ml^?1 for each species, Fg coverage on silicon increased by 4x, whereas both BSA and Fg adsorption on dextran and HA were far less dependent on protein bulk concentration.     

Human serum albumin adsorption onto a-SiC:H and a-C:H thin films deposited by plasma enhanced chemical vapor deposition

In the present paper, we report the study of the adsorption behavior of a model protein such as human serum albumin (HSA) onto surfaces of a-SiC:H and a-C:H thin films deposited by using the plasma-enhanced chemical vapor deposition (PECVD) technique. The surface composition and surface energy of the various substrates as well as the evaluation of the adsorbed amount of protein has been carried out by means of X-ray photoelectron spectroscopy (XPS) and contact angle measurements. It has been found that HSA tends to preferentially adsorb on Si-rich surfaces, as far as the relative amount of adsorbed HSA decreases with increasing S-C concentration. Preliminary elements of mechanistic models are proposed for the correlation between chemical factors and the observed protein adsorption behavior.     

Salivary protein adsorption onto hydroxyapatite and sds‐mediated elution studied by in situ ellipsometry

Whole unstimulated saliva from two donors was investigated both with respect to adsorption characteristics and SDS‐induced elutability. Salivary protein adsorption onto hydroxyapatite (HA) discs was studied by means of in situ ellipsometry in the concentration range 0.1–20% saliva. The adsorbed amounts on HA were found to be similar to those on silica, but the rates of adsorption were lower. Protein adsorption was virtually unaffected by the presence of Na⁺, whereas Ca²⁺ induced nucleation of calcium phosphate at the surface, the deposition rate being influenced by the pellicle age but not by the presence of saliva in bulk solution. The SDS elutability of adsorbed pellicles was determined on HA as well as on silica surfaces. Desorption from both surfaces was found to occur in the same SDS concentration range, although a residual layer was observed on HA. The slight net positive charge and lower charge density of HA as compared to the strongly negatively charged silica, may, at least partly, account for this observation by causing a reduction in the repulsive force between protein‐surfactant complexes and the surface. Inter‐individual differences, observed in the adsorption as well as elution experiments, are thought to relate to the compositional differences observed by SDS‐PAGE.     

Adsorption of Amorphous Silica Nanoparticles onto Hydroxyapatite Surfaces Differentially Alters Surfaces Properties and Adhesion of Human Osteoblast Cells

Silicon (Si) is suggested to be an important/essential nutrient for bone and connective tissue health. Silicon-substituted hydroxyapatite (Si-HA) has silicate ions incorporated into its lattice structure and was developed to improve attachment to bone and increase new bone formation. Here we investigated the direct adsorption of silicate species onto an HA coated surface as a cost effective method of incorporating silicon on to HA surfaces for improved implant osseointegration, and determined changes in surface characteristics and osteoblast cell adhesion. Plasma-sprayed HA-coated stainless steel discs were incubated in silica dispersions of different concentrations (0–42 mM Si), at neutral pH for 12 h. Adsorbed Si was confirmed by XPS analysis and quantified by ICP-OES analysis following release from the HA surface. Changes in surface characteristics were determined by AFM and measurement of surface wettability. Osteoblast cell adhesion was determined by vinculin plaque staining. Maximum Si adsorption to the HA coated disc occurred after incubation in the 6 mM silica dispersion and decreased progressively with higher silica concentrations, while no adsorption was observed with dispersions below 6 mM Si. Comparison of the Si dispersions that produced the highest and lowest Si adsorption to the HA surface, by TEM-based analysis, revealed an abundance of small amorphous nanosilica species (NSP) of ~1.5 nm in diameter in the 6 mM Si dispersion, with much fewer and larger NSP in the 42 mM Si dispersions. ²⁹Si-NMR confirmed that the NSPs in the 6 mM silica dispersion were polymeric and similar in composition to the larger NSPs in the 42 mM Si dispersion, suggesting that the latter were aggregates of the former. Amorphous NSP adsorbed from the 6 mM dispersion on to a HA-coated disc surface increased the surface’s water contact angle by 53°, whereas that adsorbed from the 42 mM dispersion decreased the contact angle by 18°, indicating increased and decreased hydrophobicity, respectively. AFM showed an increase in surface roughness of the 6 mM Si treated surface, which correlated well with an increase in number of vinculin plaques. These findings suggest that NSP of the right size (relative to charge) adsorb readily to the HA surface, changing the surface characteristics and, thus, improving osteoblast cell adhesion. This treatment provides a simple way to modify plasma-coated HA surfaces that may enable improved osseointegration of bone implants.     

Adsorption from saliva to silica and hydroxyapatite surfaces and elution of salivary films by SDS and delmopinol

The adsorption of proteins from human whole saliva (HWS) onto silica and hydroxyapatite surfaces (HA) was followed by quartz crystal microbalance with dissipation (QCM-D) and ellipsometry. The influence of different surface properties and adsorption media (water and PBS) on the adsorption from saliva was studied. The viscoelastic properties of the salivary films formed on the solid surfaces were estimated by the use of the Voigt-based viscoelastic film model. Furthermore, the efficiency of SDS and delmopinol to elute the adsorbed salivary film from the surfaces was investigated at different surfactant concentrations. A biphasic kinetic regime for the adsorption from saliva on the silica and HA surfaces was observed, indicating the formation of a rigidly coupled first layer corresponding to an initial adsorption of small proteins and a more loosely bound second layer. The results further showed a higher adsorption from HWS onto the HA surfaces compared to the silica surfaces in both adsorption media (PBS and water). The adsorption in PBS led to higher adsorbed amounts on both surfaces as compared to water. SDS was found to be more efficient in removing the salivary film from both surfaces than delmopinol. The salivary film was found to be less tightly bound onto the silica surfaces since more of the salivary film could be removed with both SDS and delmopinol compared to that from the HA surface. When adsorption took place from PBS the salivary layer formed at both surfaces seemed to have a similar structure, with a high energy dissipation implying that a softer salivary layer is built up in PBS as opposed to that in water. Furthermore, the salivary layers adsorbed from water solutions onto the HA were found to be softer than those on silica.     

Ellipsometric study of immunologic reactions on the surface of silicon

Adsorption of human serum albumin (HSA), egg albumin (EA), immunoglobulin G (IgG) and immunologic reactions occurring between them on silicon surface were studied by ellipsometry. Adsorption of HSA, IgG and antibodies on the monolayer of antigen is monomolecular in their isoelectric points and can be depicted by Langmuir's equation. Adsorption of EA is polymolecular apparently because of great tendency of the protein to aggregation in aqueous solutions. Comparison of the magnitudes of the protein monolayer thickness and areas per adsorbed molecule with their linear dimensions indicate that they preserve their native conformation. This allows an evaluation of the maximum number of the active sites (as approximately four) on the antigen surface accessible for antibodies and the adsorption constants for specific and nonspecific adsorption of IgG.     

Surface energy components of a dye-ligand immobilized pHEMA membranes: effects of their molecular attracting forces for non-covalent interactions with IgG and HSA in aqueous media

In the present paper, we report the study of the adsorption behaviour of human immunoglobulin G (IgG), human serum albumin (HSA) and polyethylenimine (PEI) onto surfaces of Procion Green HE-4BD (PG) immobilized poly(hydroxyethylmethacrylate) (pHEMA) membranes. The adsorption behaviour of the IgG and HSA onto surfaces of the PG–PEI complexed membrane was also studied. Surface wettability and hydrophilicity of all the membranes were investigated by static contact angle measurements. The measurements of the contact angle to various test liquids, i.e., water, glycerol, formamide, diiodomethane (DIM) and ethylene glycol on the investigated membranes were made by sessile drop method. In accordance to the Young equation, the smaller the surface tension of the test liquid, the smaller becomes the contact angles measured on all the investigated membranes surfaces. The highest contact angles were obtained with water, whereas ethylene glycol gave the lowest contact angles for all the tested membranes. Component and parameters of the surface free energy of all the investigated membranes were calculated from measured contact angle values using two methods (the geometric mean by Fowkes and acid–base by van Oss). HSA adsorption was enhanced after complexation of PEI with the immobilized dye-ligand. The adsorption of proteins and PEI significantly changed both the contact angles and component of surface free energies of the investigated membranes.     

A microfluidic biosensor based on competitive protein adsorption for thyroglobulin detection

We report a microfluidic sensing platform for the detection of thyroglobulin (Tg) using competitive protein adsorption. Serum Tg is a highly specific biomarker for residual thyroid tissue, recurrence and metastases after treatment for differentiated thyroid cancer (DTC). Conventional Tg detection techniques require complicated immobilization of antibodies and need to form a sandwich assay using additional secondary antibodies to enhance the sensitivity. We present a fundamentally different sensing technique without using antibody immobilization on a microfluidic platform. We engineer two surfaces covered by two known proteins, immunoglobulin G (IgG) and fibrinogen, with different affinities onto the surfaces. The microfluidic device offers a selective protein sensing by being displaced by a target protein, Tg, on only one of the surfaces. By utilizing the competitive protein adsorption, Tg displaces a weakly bound protein, IgG; however, a strongly bound protein, fibrinogen, is not displaced by Tg. The surface plasmon resonance (SPR) sensorgrams show that five human serum proteins, albumin, haptoglobin, IgG, fibrinogen and Tg, have different adsorption strengths to the surface and the competitive adsorption of individuals controls the exchange sequence. The adsorption and exchange are evaluated by fluorescent labeling of these proteins. Tg in a protein mixture of albumin, haptoglobin, and Tg is selectively detected based on the exchange reaction. By using the technique, we obviate the need to rely on antibodies as a capture probe and their attachment to transducers.     

Competitive protein adsorption on polysaccharide and hyaluronate modified surfaces

Adsorption of bovine serum albumin (BSA) and fibrinogen (Fg) was measured on six distinct bare and dextran- and hyaluronate-modified silicon surfaces created using two dextran grafting densities and three hyaluronic acid (HA) sodium salts derived from human umbilical cord, rooster comb and Streptococcus zooepidemicus. Film thickness and surface morphology depended on the HA molecular weight and concentration. BSA coverage was enhanced on surfaces in competitive adsorption of BSA:Fg mixtures. Dextranization differentially reduced protein adsorption onto surfaces based on oxidation state. Hyaluronization was demonstrated to provide the greatest resistance to protein coverage, equivalent to that of the most resistant dextranized surface. Resistance to protein adsorption was independent of the type of HA utilized. With changing bulk protein concentration from 20 to 40 μg ml(-1) for each species, Fg coverage on silicon increased by 4x, whereas both BSA and Fg adsorption on dextran and HA were far less dependent on protein bulk concentration.     

On the Adsorption of Human Acidic Proline-rich Proteins (PRP-1 and PRP-3) and Statherin at Solid/liquid Interfaces

The objective of the present study was to investigate the adsorption of PRP-1, PRP-3 and statherin to solid surfaces in terms of dependence on concentration, the presence of electrolyte and surface wettability. Time resolved in situ ellipsometry was used to determine the adsorbed amounts and adsorption rates of pure PRP-1, PRP-3 and statherin onto pure (hydrophilic) and methylated (hydrophobized) silica surfaces. The initial film build-up was fast and plateaus were reached within 10 min at all concentrations for both types of surfaces and all proteins. The observed adsorption and calculated diffusion rates of PRP-1, PRP-3 and statherin, respectively, indicated that the initial adsorption was mass transport controlled at low concentrations. At hydrophobic surfaces, isotherm shapes and adsorbed amounts were similar for PRP-1 and PRP-3, while statherin adsorbed to a higher extent. At hydrophilic surfaces only PRP-1 adsorbed substantially, while for PRP-3 and statherin adsorbed amounts were low. The presence of Ca 2+ ions in the phosphate buffer solution increased the adsorption of statherin and PRP-3 on hydrophobic surfaces, while PRP-1 was unaffected. On hydrophilic surfaces, all three proteins adsorbed in higher amounts in NaCl, compared to CaCl 2 at similar ionic strength. It is concluded that acidic PRPs (PRP-1 and PRP-3) and statherin readily form films on a variety of materials and solution conditions, showing that their functions may be fulfilled under a wide range of conditions.     

Enantiospecific equilibrium adsorption and chemistry of d-/l-proline mixtures on chiral and achiral Cu surfaces

A fundamental understanding of the enantiospecific interactions between chiral adsorbates and understanding of their interactions with chiral surfaces is key to unlocking the origins of enantiospecific surface chemistry. Herein, the adsorption and decomposition of the amino acid proline (Pro) have been studied on the achiral Cu(110) and Cu(111) surfaces and on the chiral Cu(643)^R&S surfaces. Isotopically labelled 1-¹³C-l- Pro has been used to probe the Pro decomposition mechanism and to allow mass spectrometric discrimination of d -Pro and 1-¹³C-l -Pro when adsorbed as mixtures. On the Cu(111) surface, X-ray photoelectron spectroscopy reveals that Pro adsorbs as an anionic species in the monolayer. On the chiral Cu(643)^R&S surface, adsorbed Pro enantiomers decompose with non-enantiospecific kinetics. However, the decomposition kinetics were found to be different on the terraces versus the kinked steps. Exposure of the chiral Cu(643)^R&S surfaces to a racemic gas phase mixture of d -Pro and 1-¹³C-l -Pro resulted in the adsorption of a racemic mixture; i.e., adsorption is not enantiospecific. However, exposure to non-racemic mixtures of d -Pro and 1-¹³C-l -Pro resulted in amplification of enantiomeric excess on the surface, indicative of homochiral aggregation of adsorbed Pro. During co-adsorption, this amplification is observed even at very low coverages, quite distinct from the behavior of other amino acids, which begin to exhibit homochiral aggregation only after reaching monolayer coverages. The equilibrium adsorption of d -Pro and 1-¹³C-l -Pro mixtures on achiral Cu(110) did not display any aggregation, consistent with prior scanning tunneling microscopy (STM) observations of dl -Pro/Cu(110). This demonstrates convergence between findings from equilibrium adsorption methods and STM experiments and corroborates formation of a 2D random solid solution.     

Use of Fluorescent Lectin Probes for Analysis of Footprints from Pseudomonas aeruginosa MDC on Hydrophilic and Hydrophobic Glass Substrata

Microbial footprints of Pseudomonas aeruginosa MDC attached for 1 h to clean or silanized glass were analyzed with fluorescently labeled lectin probes. Footprint composition varied, depending on cell physiology and substratum surface chemistry. This suggests that substratum physicochemistry affected the structure of cell surfaces of adsorbed organisms.     

An in vivo method for measuring the adsorption of plasma proteins to titanium in humans

A novel method of collecting in vivo plasma proteins of humans from osteotomies prepared during insertion of an oral implant is described. A rod containing a collecting portion with a predetermined surface is introduced into the osteomy, removed, and transferred for enzyme-linked immunosorbent assay analysis. Two experiments were used to examine the feasibility of the method. In the first, titanium (Ti) rods with different roughness were exposed for 10 min to the blood. Blasted and acid-etched surfaces adsorbed four times more and acid-etched surfaces adosorbed two times more plasma proteins as compared to machined surfaces. In the second experiment, blasted and acid-etched rods were wetted for 10 s prior to the insertion. The adsorption for fibronectin, albumin, fibrinogen, and IgG was enhanced significantly compared with nonwetted rods. These results are discussed in the light of previous methods used in studies on adsorption. Thus, use of the collecting instrument enables aspects of human plasma–implant interface to be studied in a more realistic manner.     

Competitive adsorption of binary mixture of <Emphasis Type="Italic">Leptospirillum ferriphilum</Emphasis> and <Emphasis Type="Italic">Acidithiobacillus caldus</Emphasis> onto pyrite

Leptospirillum ferriphilum and Acidithiobacillus caldus are two important acidophilic microorganisms involved in iron and sulfur oxidation during bioleaching. Cell adsorption to mineral surfaces is important for the direct leaching or contact leaching of minerals. In this study, we report the competitive adsorption of binary mixtures of L. ferriphilum LF-104 and A. caldus MTH-04 onto pyrite surfaces. The Langmuir adsorption parameter (C_Am) indicated that these two bacteria underwent competitive adsorption to pyrite. Real-time quantitive PCR was used to quantify the relative amounts of L. ferriphilum and A. caldus adsorbed onto the surfaces of pyrite following exposure to a mixture of these two organisms. The adsorption of L. ferriphilum was not affected by A. caldus. However, adsorption of A. caldus was greatly affected by the presence of L. ferriphilum. Zeta-potential measurements and FT-IR spectroscopic studies showed that L. ferriphilum had a higher electrostatic attraction towards pyrite when compared to A. caldus. Based on the above results, we propose a competitive adsorption model to explain the mechanism by which L. ferriphilum and A. caldus compete in their adsorption to pyrite, although L. ferriphilum dominated in the competitive adsorption process. This work provides a better understanding of the adsorption behavior of mixed microbial populations onto mineral surfaces.     

C-reactive protein and C1q regulate platelet adhesion and activation on adsorbed immunoglobulin G and albumin

Blood platelets and C-reactive protein (CRP) are both used clinically as markers of ongoing inflammation, and both participate actively in inflammatory responses, although the biological effects are still incompletely understood. Rapidly adhering platelets express receptors for complement factor 1q (C1q) and the Fc part of immunoglobulin G (IgG), and CRP is known to activate/regulate complement via C1q binding, and to ligate FcgammaRs. In the present study, we used normal human IgG pre-adsorbed to a well-characterized methylated surface as a model solid-phase immune complex when investigating the effects of CRP and C1q on platelet adhesion and activation. Protein adsorption was characterized using ellipsometry and polyclonal antibodies, and human serum albumin (HSA) and non-coated surfaces were used as reference surfaces. Platelet adhesion to IgG and HSA was inhibited by both C1q and CRP. Furthermore, CRP (moderately) and C1q (markedly) decreased the spreading of adhering platelets. The combination of C1q and CRP was slightly more potent in reducing cell adhesion to IgG, and also impaired the adhesion to HSA and non-coated surfaces. Platelet production of thromboxane B2 (TXB(2)) was also reduced by C1q both in the presence and absence of CRP, whereas CRP alone had no effect on TXB(2) production. We conclude that CRP and C1q regulate the behaviour of platelets, and that this may be an important immunoregulatory mechanism during inflammatory conditions.     

Adsorption of 125I-labeled immunoglobulin G, its F(ab')2 and Fc fragments onto plasma-polymerized films

Plasma-polymerized films were formed on flat glass plates using allylamine, acrylic acid, acrolein, and allylcyanide as monomers. Adsorption of (125)I-labeled-proteins such as immunoglobulin G (IgG), its F(ab')(2) and Fc fragments, and human serum albumin (HSA) was measured on these plasma-polymerized (PP) films covering the glass plates and on commercially available polymer plates. The adsorption isotherm followed the Langmuir equation, from which the binding constant and amount of saturation binding were estimated. We found that, in general, a cationic surface had higher affinity for protein adsorption than an anionic surface. Among the surfaces examined, the PP-allylamine surface showed the highest binding capacity (264.2 nmol/m(2)) for F(ab')(2) fragment: it was remarkably high. Of the surfaces examined, the PP-acrylic acid surface showed the lowest binding capacity (12.8 nmol/m(2)) for F(ab')(2) fragment. The PP-acrylic acid surface also indicated the lowest protein binding capacity for IgG (16.5 nmol/m(2)), Fc-IgG (32.4 nmol/m(2)) and HSA (16.7 nmol/m(2)), respectively. These imply that the PP-acrylic acid film is useful to fabricate as a low protein adsorption material which expected to decrease cell adhesion. Results of our investigation indicate that the plasma-polymerization technique is promising for fabrication of a smart NanoBio-interface which can control the protein adsorption on a solid-phase substrate using a suitable monomer such as allylamine for the large adsorption and acrylic acid for the small adsorption.     

Cell spreading factor. Occurrence and specificity of action.

A factor required for spreading of substratum-attached baby hamster kidney cells (BHK), Chinese hamster ovary (CHO) cells, HeLa cells, and L cells has been isolated and purified from fetal calf serum. A similar factor has also been found in calf, porcine, human, rabbit, and chicken sera. The spreading factor was active when adsorbed to the substratum and prior adsorption of other proteins prevented cell spreading, regardless of the addition of spreading factor or unfractionated serum to the incubation medium. Antibody against the fetal calf spreading factor inhibited the spreading activity associated with unfractionated fetal calf serum and also the spreading activity associated with calf serum and porcine serum. In model system studies it was found that antibody against BHK cell surfaces induced cell spreading when the antibody was adsorbed to the substratum; when it was present in the incubation medium as well as on the substratum, cell spreading was not observed. The data are discussed in terms of the hypothesis that there is a specific serum factor which adsorbs to the substratum surface and is thereby activated, and which then forms the target for certain cell surface receptors. Interaction between adsorbed-activated factor and cell surface receptors leads to cell spreading.