Holliday junction resolution is modulated by archaeal chromatin components in vitro.

The Holliday junction-resolving enzyme Hjc is conserved in the archaea and probably plays a role analogous to that of Escherichia coli RuvC in the pathway of homologous recombination. Hjc specifically recognizes four-way DNA junctions, cleaving them without sequence preference to generate recombinant DNA duplex products. Hjc imposes an X-shaped global conformation on the bound DNA junction and distorts base stacking around the point of cleavage, three nucleotides 3' of the junction center. We show that Hjc is autoinhibitory under single turnover assay conditions and that this can be relieved by the addition of either competitor duplex DNA or the architectural double-stranded DNA-binding protein Sso7d (i.e. by approximating in vivo conditions more closely). Using a combination of isothermal titration calorimetry and fluorescent resonance energy transfer, we demonstrate that multiple Hjc dimers can bind to each synthetic four-way junction and provide evidence for significant distortion of the junction structure at high protein:DNA ratios. Analysis of crystal packing interactions in the crystal structure of Hjc suggests a molecular basis for this autoinhibition. The wider implications of these findings for the quantitative study of DNA-protein interactions is discussed.     

DNA recombination: holliday junctions dynamics and branch migration

Holliday junctions are critical intermediates for homologous, site-specific recombination, DNA repair, and replication. A wealth of structural information is available for immobile four-way junctions, but the controversy on the mechanism of branch migration of Holliday junctions remains unsolved. Two models for the mechanism of branch migration were suggested. According to the early model of Alberts-Meselson-Sigal (Sigal, N., and Alberts, B. (1972) J. Mol. Biol. 71, 789-793 and Meselson, M. (1972) J. Mol. Biol. 71, 795-798), exchanging DNA strands around the junction remain parallel during branch migration. Kinetic studies of branch migration (Panyutin, I. G., and Hsieh, P. (1994) Proc. Natl. Acad. Sci. U. S. A. 91, 2021-2025) suggest an alternative model in which the junction adopts an extended conformation. We tested these models using a Holliday junction undergoing branch migration and time-lapse atomic force microscopy, an imaging technique capable of imaging DNA dynamics. The single molecule atomic force microscopy experiments performed in the presence and in the absence of divalent cations show that mobile Holliday junctions adopt an unfolded conformation during branch migration that is retained despite a broad range of motion in the arms of the junction. This conformation of the junction remains unchanged until strand separation. The data obtained support the model for branch migration having the extended conformation of the Holliday junction.     

Conformational model of the Holliday junction transition deduced from molecular dynamics simulations

Homologous recombination plays a key role in the restart of stalled replication forks and in the generation of genetic diversity. During this process, two homologous DNA molecules undergo strand exchange to form a four-way DNA (Holliday) junction. In the presence of metal ions, the Holliday junction folds into the stacked-X structure that has two alternative conformers. Experiments have revealed the spontaneous transitions between these conformers, but their detailed pathways are not known. Here, we report a series of molecular dynamics simulations of the Holliday junction at physiological and elevated (400 K) temperatures. The simulations reveal new tetrahedral intermediates and suggest a schematic framework for conformer transitions. The tetrahedral intermediates bear resemblance to the junction conformation in complex with a junction-resolving enzyme, T7 endonuclease I, and indeed, one intermediate forms a stable complex with the enzyme as demonstrated in one simulation. We also describe free energy minima for various states of the Holliday junction system, which arise during conformer transitions. The results show that magnesium ions stabilize the stacked-X form and destabilize the open and tetrahedral intermediates. Overall, our study provides a detailed dynamic model of the Holliday junction undergoing a conformer transition.     

A computational and experimental study of the bending induced at a double-triple helix junction.

We have studied the conformation of a 17 base-pair homopyrimidine.homopurine triple helix formed on a fragment of duplex DNA derived from Simian Virus SV40. Gel retardation assays indicate that an 80 base-pair fragment has an altered conformation when the triple helix is formed, which is most likely to result from an induced bend in the DNA. Investigation of the detailed conformation of the double helix-triple helix junctions has been performed by means of molecular modelling. Bending on the 5' and 3' sides of the third strand oligonucleotide are not located at equivalent positions with respect to the junctions, which is explained in terms of base stacking. The junction effects on DNA structure, induced by the requirement for cytosine protonation in the Hoogsteen-bonded strand to form CGC+ base triplets, are also discussed.     

Single-molecule nanopositioning: structural transitions of a helicase-DNA complex during ATP hydrolysis

The conformational states of Escherichia coli Rep helicase undergoing ATP hydrolysis while bound to a partial-duplex DNA (pdDNA) were studied using single-molecule FRET. Crystallographic studies showed that Rep bound to single-stranded DNA can exist in open and closed conformations that differ in the orientation of the 2B subdomain. FRET measurements between eight Rep mutants donor-labeled at different residues and pdDNA acceptor-labeled at the junction were conducted at each of the four nucleotide states. The positions of donor-labeled residues, based on crystal structure, and FRET measurements between these donor molecules and the acceptor fluorophore at the DNA junction were used to predict the most likely position for the DNA junction using a triangulation algorithm. These predicted junction positions are compared with the crystal structure to determine whether the open or closed conformation is more consistent with the FRET data. Our data revealed that there are two distinct Rep-pdDNA conformations in the ATPγS and ADP states, an unexpected finding. The primary conformation is similar to that observed in nucleotide-free and ADP.Pi states, and the secondary conformation is a novel conformation where the duplex DNA and 2B subdomain moved as a unit by 13 Å relative to the rest of the protein. The primary conformation found in all nucleotide states is consistent with the closed conformation of the crystal structure however; the secondary conformation is a new conformation that has not been observed before. We discuss the possible implications of this newly observed conformation.     

New insight into the recognition of branched DNA structure by junction-resolving enzymes

Junction-resolving enzymes are nucleases that exhibit structural selectivity for the four-way (Holliday) junction in DNA. In general, these enzymes both recognize and distort the structure of the junction. New insight into the molecular recognition processes has been provided by two recent co-crystal structures of resolving enzymes bound to four-way DNA junctions in highly contrasting ways. T4 endonuclease VII binds the junction in an open conformation to an approximately flat binding surface whereas T7 endonuclease I envelops the junction, which retains a much more three-dimensional structure. Both proteins make contacts with the DNA backbone over an extensive area in order to generate structural specificity. The comparison highlights the versatility of Holliday junction resolution, and extracts some general principles of recognition.     

Modeling multi-component protein-DNA complexes: the role of bending and dimerization in the complex of p53 dimers with DNA

We used molecular modeling to study the optimal conformation of the complex between two p53 DNA-binding domain monomers and a 12 base-pair target DNA sequence. The complex was constructed using experimental data on the monomer binding conformation and a new approach to deform the target DNA sequence. Combined with an internal/helicoidal coordinate model of DNA, this approach enables us to bend the target sequence in a controlled way while respecting the contacts formed with each p53 monomer. The results show that the dimeric complex favors DNA bending towards the major groove at the dimer junction by a value close to experimental findings. In contrast to inferences from earlier models, the calculation of key contributions to the free energy of the complexes indicates a determinant role for DNA in the formation of the complex with the dimer of the p53 DNA-binding domains.     

Recognition and manipulation of branched DNA by the RusA Holliday junction resolvase of Escherichia coli.

Homologous recombination is a fundamental cellular process that shapes and reshapes the genomes of all organisms and promotes repair of damaged DNA. A key step in this process is the resolution of Holliday junctions formed by homologous DNA pairing and strand exchange. In Escherichia coli , a Holliday junction is processed into recombinant products by the concerted activities of the RuvA and RuvB proteins, which together drive branch migration, and RuvC endonuclease, which resolves the structure. In the absence of RuvABC, recombination can be promoted by increasing the expression of the RusA endonuclease, a Holliday junction resolvase encoded by a cryptic prophage gene. Here, we describe the DNA binding properties of RusA. We found that RusA was highly selective for branched molecules and formed complexes with these structures even in the presence of a large excess of linear duplex DNA. However, it does bind weakly to linear duplex DNA. Under conditions where there was no detectable binding to duplex DNA, RusA formed a highly structured complex with a synthetic Holliday junction that was remarkably stable and insensitive to divalent metal ions. The duplex arms were found to adopt a specific alignment within this complex that approximated to a tetrahedral conformation of the junction.     

Coupling of mechanical and electronic properties of carbon nanotubes

Because of the potential importance of carbon nanotubes (CNT) in renewable energy and other fields, molecular orbital ab initio calculations are used to study the relation between mechanical and electronic properties of such structures. We estimate a modulus of elasticity of 1.3 TPa and find out that the mechanism of CNT structure deformation is dependent on their chirality. Armchair and chiral nanotubes have ductile deformation fracture while zigzag have both ductile and brittle; on the other hand armchair nanotubes fracture and form two caps while chiral nanotubes adopt a helical-structure conformation. In addition, the energy gap between occupied and unoccupied molecular orbitals increases when nanotubes are under plastic deformation. This strong coupling between mechanical and electrical properties can be used to tune CNT mechanically to specific electronic bandgaps, affecting directly their electromagnetic absorption properties.     

Enhanced reactivity of a B-Z junction for cleavage by the restriction enzyme MboI

We have been investigating the structure, dynamics, and ligand-binding properties of the interface that exists between a right-handed conformation and a left-handed conformation (i.e., a B-Z junction) in synthetic DNA oligomers. Since exo- and endonuclease activity is known to be sensitive to the conformation of the template DNA, we have designed and synthesized a DNA oligonucleotide of 20 base pairs (designated as BZ-III) with an MboI recognition site (GATC) at the location of a potential B-Z junction. The activity of the MboI enzyme toward this molecule and DNA oligomers that contain multiple MboI sites located at B-Z junctions was monitored in the absence and presence of the Z-conformation-inducing reagent cobalt hexaammine. In all cases, the activity of the enzyme was enhanced in the presence of cobalt hexaammine. The activity of MboI toward BZ-III, in the presence and absence of cobalt hexaammine, was also examined when the DNA oligomer is also in the presence of the DNA binding drugs actinomycin D, ametantrone, or ethidium bromide. In all cases, the activity of the enzyme was inhibited in the presence of drug. The results suggest that B-Z junctions are structurally unique and that this uniqueness may alter nuclease activity at sites in or near the junction.     

Sequence and functional-group specificity for cleavage of DNA junctions by RuvC of Escherichia coli.

RuvC is the DNA junction-resolving enzyme of Escherichia coli. While the enzyme binds to DNA junctions independently of base sequence, it exhibits considerable sequence selectivity for the phosphodiester cleavage reaction. We have analyzed the sequence specificity using a panel of DNA junctions, measuring the rate of cleavage of each under single-turnover conditions. We have found that the optimal sequence for cleavage can be described by (A approximately T)TT downward arrow(C>G approximately A), where downward arrow denotes the position of backbone scission. Cleavage is fastest when the cleaved phosphodiester linkage is located at the point of strand exchange. However, cleavage is possible one nucleotide 3' of this position when directed by the sequence, with a rate that is 1 order of magnitude slower than the optimal. The maximum sequence discrimination occurs at the central TT in the tetranucleotide site, where any alteration of sequence results in a rate reduction of at least 100-fold and cleavage is undetectable for some changes. However, certain sequences in the outer nucleotides are strongly inhibitory to cleavage. Introduction of base analogues around the cleavage site reveals a number of important functional groups and suggests that major-groove contacts in the center of the tetranucleotide are important for the cleavage process. Since RuvC binds to all the variant junctions with very similar affinity, any contacts affecting the rate of cleavage must be primarily important in the transition state. Introduction of the optimal cleavage sequence into a three-way DNA junction led to relatively efficient cleavage by RuvC, at a rate only 3-fold slower than the optimal four-way junction. This is consistent with a protein-induced alteration in the conformation of the DNA.     

Preliminary spectroscopic characterization of a synthetic DNA oligomer containing a B-Z junction at high salt.

It is well known that the local conformation of a segment of DNA is dependent upon both the sequence of the segment and the conditions under which the DNA is prepared. In extreme cases, the DNA may contain regions of both right and left-handed conformations, mandating the existence of a conformational junction between the two. These B-Z junctions have been observed in plasmids but, to date, no model systems have been characterized to determine the molecular nature of these junctions. Preliminary CD, UV, and NMR studies on such a model are presented here. A 16 base pair oligonucleotide, containing a potential B-Z junction, has been synthesized and characterized by the above techniques. The results suggest that this molecule contains both right and left-handed conformations under condition of high salt, and thus a B-Z junction.     

HU binding to a DNA four-way junction probed by Förster resonance energy transfer

The Escherichia coli protein HU is a non-sequence-specific DNA-binding protein that interacts with DNA primarily through electrostatic interactions. In addition to nonspecific binding to linear DNA, HU has been shown to bind with nanomolar affinity to discontinuous DNA substrates, such as repair and recombination intermediates. This work specifically examines the HU-four-way junction (4WJ) interaction using fluorescence spectroscopic methods. The conformation of the junction in the presence of different counterions was investigated by Fo?rster resonance energy transfer (FRET) measurements, which revealed an ion-type conformational dependence, where Na(+) yields the most stacked conformation followed by K(+) and Mg(2+). HU binding induces a greater degree of stacking in the Na(+)-stabilized and Mg(2+)-stabilized junctions but not the K(+)-stabilized junction, which is attributed to differences in the size of the ionic radii and potential differences in ion binding sites. Interestingly, junction conformation modulates binding affinity, where HU exhibits the lowest affinity for the Mg(2+)-stabilized form (24 μM(-1)), which is the least stacked conformation. Protein binding to a mixed population of open and stacked forms of the junction leads to nearly complete formation of a protein-stabilized stacked-X junction. These results strongly support a model in which HU binds to and stabilizes the stacked-X conformation.     

The molecular structure of Okazaki fragment r(CGCA)d(AAAAAGCG):d(CGCTTTTTTGCG) in solution

The hetero duplex molecule, r(CGCA)d(AAAAAGCG):d(CGCTTTTTTGCG) which corresponds to Okazaki fragment was synthesized and its molecular structure has been analyzed by NMR study. The RNA strand of RNA-DNA hybrid region adopts A-form and DNA strand of the same region deviates from the standard B-form. The conformation of DNA-DNA duplex segment belongs to B-form. The hybrid-DNA duplex junction shows a structural discontinuities, A-B junction. The same conformational characteristic of oligo(dA): oligo(dT) tract as that of DNA oligomer which has same base sequence has been observed.     

Hydration of [d(CGC)r(aaa)d(TTTGCG)](2)

We have studied the hydration and dynamics of RNA C2'-OH in a DNA. RNA hybrid chimeric duplex [d(CGC)r(aaa)d(TTTGCG)](2). Long-lived water molecules with correlation time tau(c) larger than 0.3 ns were found close to the RNA adenine H2 and H1' protons in the hybrid segment. A possible long-lived water molecule was also detected close to the methyl group of 7T in the RNA-DNA junction but not to the other two thymine bases (8T and 9T). This result correlates with the structural studies that only DNA residue 7T in the RNA-DNA junction adopts an O4'-endo sugar conformation (intermediate between B-form and A-form), while the other DNA residues including 3C in the DNA-RNA junction, adopt C1'-exo or C2'-endo conformations (in the B-form domain). Based on the NOE cross-peak patterns, we have found that RNA C2'-OH tends to orient toward the O3' direction, forming a possible hydrogen bond with the 3'-phosphate group. The exchange rates for RNA C2'-OH were found to be around 5-20 s(-1), compared to 26.7(+/-13.8) s(-1) reported previously for the other DNA.RNA hybrid duplex. This slow exchange rate may be due to the narrow minor groove width of [d(CGC)r(aaa)d(TTTGCG)](2), which may trap the water molecules and restrict the dynamic motion of hydroxyl protons. The distinct hydration patterns of the RNA adenine H2 and H1' protons and the DNA 7T methyl group in the hybrid segment, as well as the orientation and dynamics of the RNA C2'-OH protons, may provide a molecular basis for further understanding the structure and recognition of DNA.RNA hybrid and chimeric duplexes.     

Information concerning the mechanism of electrophoretic DNA separation provided by quantitative video-epifluorescence microscopy

Changes in conformation, length, and mobility of individual DNA molecules during agarose gel electrophbresis were measured using video micrographs obtained by epifluorescence microscopy. Globular, V-shaped, and linear conformations of DNA are found. The mobility, upon transformation from the globular to the V-shaped conformation, decreases, suggesting a collision with a gel fiber. The duration of interaction between DNA and gel fiber is proportional to the length of DNA. Hypothetically, this proportionality underlies the size separation of DNA by agarose gel electrophoresis. DNA release from the gel fiber appears to involve the movement of the arms of the V-shaped molecule around the gel fiber. Concomitant with this movement is a length reduction the degree of which is constant for DNA of various lengths in a particular buffer milieu. The luminant densitometric profiles of DNA molecules in the V conformation show maxima at the ends and apex of the V. The unequal distribution of nucleotides along the DNA chain appears to provide the driving force for the molecular movement around the gel fiber.     

Uranyl photoprobing of a four-way DNA junction: evidence for specific metal ion binding.

Metal ions are very important in mediating the folding of nucleic acids, as exemplified by the folding of the four-way DNA junction into the stacked X-conformation. Uranyl ion-mediated photocleavage provides a method for the localization of high-affinity ion binding sites in nucleic acids, and we have applied this to the four-way DNA junction. We have made the following observations. (i) Uranyl ions (UO2(2+)) suppressed the reactivity of junction thymine bases against attack by osmium tetroxide, indicating that the uranyl ion induces folding of the junction into a stacked conformation. (ii) DNA located immediately at the point of strand exchange on the two exchanging strands was hypersensitive to uranyl photocleavage. The relative hypersensitivity was considerably accentuated when the photocleavage was carried out in the presence of citrate ions. This suggests the presence of a tight binding site for the uranyl ion in the junction. (iii) The same positions were significantly protected from uranyl cleavage by the presence of hexamminecobalt (III) or spermidine. These ions are known to induce the folded conformation of the four-way junction with high efficiency, suggesting a direct competition between the ions. By contrast, magnesium ions failed to generate a similar protection against photocleavage. These results suggest that the uranyl, hexamminecobalt (III) and spermidine ions compete for the same high affinity binding site on the junction. This site is located at the centre of the junction, at the point where the exchanging strands pass between the stacked helices. We believe that we have observed the first known example of a metal ion 'footprint' on a folded nucleic acid structure.     

Molecular dynamics study of core–shell structure from carbon nanotube and platinum nanowire

The interaction between the carbon nanotubes (CNTs) and platinum (Pt) nanowires (NWs) was investigated using forced field-based molecular dynamics (MD) simulations. Our results display that the Pt NW can induce the self-assembly of the CNTs to form a shell-core structure, this is because of the van der Waals interaction and the offset face-to-face π–π stacking interaction. The diameter of the CNT plays a major role in the formation of shell–core structure. Furthermore, the position of the CNT on the Pt NW also affects the formation of shell–core configuration, whereas the cross section of the NWs has a negligible effect on the fabrication process. Moreover, the interaction between multi-wall carbon nanotube and Pt nanowires was also discussed in detail, it is worth noting that the formation conformation of the CNT is also much more stable.     

A molecular simulation picture of DNA hydration around A- and B-DNA

Recent results from molecular dynamics (MD) simulations on hydration of DNA with respect to conformation are reviewed and compared with experimental data. MD simulations of explicit solvent around DNA can now give a detailed model of DNA that not only matches well with the experimental data but provides additional insight beyond current experimental limitations. Such simulation results are analyzed with a focus on differential hydration properties between A- and B-DNA and between C/G and A/T base pairs. The extent of hydration is determined from the number of waters in the primary shell and compared to experimental numbers from different measurements. High-resolution hydration patterns around the whole DNA are shown and correlated with the conformations. The role of ions associating with DNA is discussed with respect to changes in the hydration structure correlating with DNA conformation.     

Carbon nanotube array: A new MIP platform

Here we demonstrate that a free-standing carbon nanotube (CNT) array can be used as a large surface area and high porosity 3D platform for molecular imprinted polymer (MIP), especially for surface imprinting. The thickness of polymer grafted around each CNT can be fine-tuned to imprint different sizes of target molecules, and yet it can be thin enough to expose every imprint site to the target molecules in solution without sacrificing the capacity of binding sites. The performance of this new CNT–MIP architecture was first assessed with a caffeine-imprinted polypyrrole (PPy) coating on two types of CNT arrays: sparse and dense CNTs. Real-time pulsed amperometric detection was used to study the rebinding of the caffeine molecules onto these CNT-MIPPy sensors. The dense CNT-MIPPy sensor presented the highest sensitivity, about 15 times better when compared to the conventional thin film, whereas an improvement of 3.6 times was recorded on the sparse CNT. However, due to the small tube-to-tube spacing in the dense CNT array, electrode fouling was observed during the detection of concentrated caffeine in phosphate buffer solution. A new I–V characterization method using pulsed amperometry was introduced to investigate the electrical characterization of these new devices. The resistance value derived from the I–V plot provides insight into the electrical conductivity of the CNT transducer and also the effective surface area for caffeine imprinting.