Self-assembling protein hydrogels with modular integrin binding domains

Hydrogels with integrin binding activity were created from associating proteins with embedded RGD sequences. These proteins are a modified AC(10)Bcys triblock design composed of acidic A and basic B leucine zipper associating domains flanking a new soluble disordered coil block that contains nine repeats of AGAGAGPEG and three copies of the RGD integrin binding sequence. As with the original AC(10)Bcys design without the embedded RGD sequences, these proteins self-assemble into stable hydrogels at concentrations above approximately 50 mg/mL in a range of solution pH and temperature conditions. The mechanism for hydrogel assembly is the intermolecular association of A and B helical domains into bundles which act as cross-links connected by the soluble central disordered coil domains. The secondary structure of the proteins and the mechanical properties of the hydrogels they form are not adversely affected by the presence of the RGD sequences. The RGD sequences embedded in the disordered coil region support the adhesion, spreading, and polarization of human fibroblast cells on protein coated surfaces. Confocal microscopy studies demonstrated the presence of focal adhesion complexes and organized actin stress fibers in these cells. In contrast, fibroblasts seeded onto surfaces coated with the original AC(10)Bcys protein remained rounded and did not form focal adhesions, indicating that bioactivity is conferred by the presence of the embedded RGD sequences. Such hydrogel-forming bioactive proteins have potential for cell and tissue culture applications.     

Injectable and in situ gelling hydrogels for modified protein release

A novel injectable polysaccharide system based on calcium Alginate (Ca-Alg) hydrogel and two Dextran methacrylate derivatives (DexMA) was recently developed. The resulting Interpenetrating Polymer Network showed a synergistic mechanical behavior that can be exploited to target the hydrogel properties towards specific biomedical needs. In the present paper, hydrogels composed of 3% (w/v) Ca-Alg and Dextran (Mw 40 × 10⁴ and 500 × 10⁴), derivatized with methacrylic groups (derivatization degrees 5 and 30%) at concentrations 5% (w/v), were characterized. The data reported here evidenced that Mw and derivatization degree of Dex chains can deeply affect the mechanical as well a model protein (Horseradish peroxidase) delivery rate. The enzymatic activity of such model protein was never significantly altered by the adopted experimental conditions.     

Injectable tissue-engineered cartilage using a fibrin glue polymer.

The purpose of this study was to demonstrate the feasibility of using a fibrin glue polymer to produce injectable tissue-engineered cartilage and to determine the optimal fibrinogen and chondrocyte concentrations required to produce solid, homogeneous cartilage. The most favorable fibrinogen concentration was determined by measuring the rate of degradation of fibrin glue using varying concentrations of purified porcine fibrinogen. The fibrinogen was mixed with thrombin (50 U/cc in 40 mM calcium chloride) to produce fibrin glue. Swine chondrocytes were then suspended in the fibrinogen before the addition of thrombin. The chondrocyte/polymer constructs were injected into the subcutaneous tissue of nude mice using chondrocyte concentrations of 10, 25, and 40 million chondrocytes/cc of polymer (0.4-cc injections). At 6 and 12 weeks, the neocartilage was harvested and analyzed by histology, mass, glycosaminoglycan content, DNA content, and collagen type II content. Control groups consisted of nude mice injected with fibrin glue alone (without chondrocytes) and a separate group injected with chondrocytes suspended in saline only (40 million cells/cc in saline; 0.4-cc injections). The fibrinogen concentration with the most favorable rate of degradation was 80 mg/cc. Histologic analysis of the neocartilage showed solid, homogeneous cartilage when using 40 million chondrocytes/cc, both at 6 and 12 weeks. The 10 and 25 million chondrocytes/cc samples showed areas of cartilage separated by areas of remnant fibrin glue. The mass of the samples ranged from 0.07 to 0.12 g at 6 weeks and decreased only slightly by week 12. The glycosaminoglycan content ranged from 2.3 to 9.4 percent for all samples; normal cartilage controls had a content of 7.0 percent. DNA content ranged from 0.63 to 1.4 percent for all samples, with normal pig cartilage having a mean DNA content of 0.285 percent. The samples of fibrin glue alone produced no cartilage, and the chondrocytes alone produced neocartilage samples with a significantly smaller mass (0.47 g at 6 weeks and 0.46 g at 12 weeks) when compared with all samples produced from chondrocytes suspended in fibrin glue (p < 0.03). Gel electrophoreses demonstrated the presence of type II collagen in all sample groups. This study demonstrates that fibrin glue is a suitable polymer for the formation of injectable tissue-engineered cartilage in the nude mouse model. Forty million chondrocytes per cc yielded the best quality cartilage at 6 and 12 weeks when analyzed by histology and content of DNA, glycosaminoglycan, and type II collagen.     

Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for adipose tissue regeneration

An injectable, biodegradable and glucose-responsive hydrogel derived from natural polysaccharide derivatives was synthesized to deliver adipogenic factor of insulin in vitro for adipose tissue engineering. The biodegradable hydrogel based N-succinyl-chitosan (SCS) and aldehyde hyaluronic acid (AHA) with covalently conjugated glucose oxidase and catalase. The gelation is attributed to the Schiff-base reaction between amino and aldehyde groups of SCS and AHA, respectively. The morphologies and compressive modulus of the freeze-dried hydrogels demonstrated that the incorporated insulin and enzymes results in the formation of a tighter network structure in composite hydrogels. The immobilized enzymes triggered conversion of glucose reduces the pH value of the microenvironment, and results in hydrolysis and increasing swelling of the network basing on Schiff-base cross-linking. The pH inside the hydrogel, kept in PBS solution at pH 7.4 and 37°C, linearly dropped from 7.40 to 7.17 during 4 h of initial period, then slowly increased to 7.36 after 24 h. Correspondingly, the swelling ratio increased from 20.8 to 28.6 at 37°C in PBS with 500 mg/dL glucose. In PBS buffer with 500 mg/dL glucose, about 10.8% of insulin was released from the hydrogel after 8 h of incubation while upon observation. The results demonstrated that the adipogenic factor of insulin would be released from this biodegradable hydrogel device into the local microenvironment in a controlled fashion by the swelling of hydrogel network. These preliminary studies indicate that the biodegradable and glucose-responsive hydrogel may have potential uses in adipose tissue engineering applications.     

Preparation, characterization and properties of aminoethyl chitin hydrogels

Aminoethyl chitins (AEC) with different amino contents were synthesized from chitin and 2-chlorethylamine hydrochloride, and the AEC hydrogels were prepared by crosslinking with glutaraldehyde. The microstructures, swelling behaviors and antibacterial activities of the hydrogels were investigated. The results of Fourier transform infrared spectroscopy (FTIR), (1)H nuclear magnetic resonance ((1)H NMR) spectrum and scanning electron microscopy (SEM) showed that the hydrogels were prepared by forming the Schiff base from AEC and glutaraldehyde. The aminoethyl chitin hydrogels were sensitive to acidic environment. The swelling ratio changed with the amino content of AEC, declined with the increase of the crosslinking agent concentration and increased with the increase of the AEC concentration. In addition, the antibacterial results of the hydrogels against Staphylococcus aureus (S. aureus) indicated that the hydrogels had good antibacterial activities, and the antibacterial properties were affected by the amino content of AEC and the crosslinking agent concentration.     

Injectable and moldable hydrogels for use in sensitive and wide range strain sensing applications

Recently, the use of hybrid double network (DN) hydrogels has become prominent due to their enhanced mechanical properties, which has opened the door for new applications of these soft materials. Only a few of these gels have demonstrated both injectable and moldable capabilities. In this work, we report the mechanical properties, gauge factor (GF) values and demonstrate both the injectability and moldability of a gelatin/polyacrylamide DN hydrogel. We optimized several parameters, such as, gelatin to polyacrylamide ratio, reactant concentrations and metal ion concentration, to produce a gelatin/polyacrylamide hydrogel with superior mechanical properties. The highest water content gel was capable of withstanding strains of 5000% before failure. These gels were facilely injected into molds where they effectively changed shape and maintained similar properties prior to remolding. When 20 mM calcium was doped into a similar gel, a tensile strength of 1.71 MPa was achieved. Aside from improving the mechanical properties of the gels, both Ca²⁺ and Mg²⁺ also improved their conductivity, so they were tested for use as strain sensors. The sensitivity of the hydrogel strain sensors were measured using the GF. For the 20 mM Ca²⁺ hydrogel, these GF values ranged from 1.63 to 6.85 for strains of 100% to 2100% respectively. Additionally, the sensors showed good stability over continuous cyclic stretching, demonstrating their long term reliability for strain sensing.     

Injectable and sustained delivery of human growth hormone using chemically modified Pluronic copolymer hydrogels

A new injectable biodegradable hydrogel system with thermosensitive sol-gel transition behavior was developed. A series of A-B-A triblock copolymers consisting of Pluronic copolymer end-capped with D- or L-lactic acid oligomers (PL-LA(n)) with various chain lengths (n = 5,12) was synthesized. It was assumed that a pair of two triblock copolymers with enantiomeric oligolactide chains, when blended in an equimolar mixture, would form more stable, self-assembled, and stereocomplexed (ST) hydrogels. A series of blend hydrogels encapsulating human growth hormone (hGH) was prepared by varying blend ratios between PL and stereocomplexed PL copolymers. They showed sustained release of hGH via an erosion-dependent mechanism. The hydrogel with a 5% blending ratio exhibited the most delayed mass erosion as well as sustained protein release patterns in vitro possibly due to the formation of a fish-net like 3-D mesh structure. The effect of incubation condition on hGH release and degradation behaviors was also assessed.     

Synthesis and properties of chitosan hydrogels modified with heterocycles

Preparation and properties of chitosan modified with heterocycles in absence or presence of gluteraldehyde as a cross linker is described. New modified chitosan–heterocyclic hydrogels were prepared from chitosan and heterocyclic compounds such as N,N′-biisomaleimide, N,N′-biisophthalimide, and N,N′-phthalimidomaleimide via a crosslinking reaction. The new hydrogels chemical structure was characterized by spectral analysis (IR), X-ray diffraction, thermal gravimetric analysis (TGA), solubility, and swellability in water and different organic solvents. Evaluation of the efficiency of the new hydrogels to uptake copper and cobalt ions from aqueous systems was carried out and promising results were obtained.     

Injectable polymeric microspheres with X-ray visibility. Preparation,properties, and potential utility as new traceable bulking agents

The copolymer of methyl methacrylate (MMA) and 2-[2',3',5'-triiodobenzoyl]oxoethyl methacrylate (1), ratio 3:1 (mass:mass), was prepared via a free-radical polymerization in bulk. The copolymer (M(w) = 97.8 kD and M(n) = 41.5 kD) was dissolved in chloroform and subsequently transformed into beads with a diameter in the micrometer range, using a solvent evaporation technique. The resulting microbeads were characterized by different techniques, including NMR spectroscopy, differential scanning calorimetry, gel permeation chromatography, and scanning electron microscopy. The latter technique was used as the basis for statistical analysis of the bead size. Typically, an average diameter of 96 microm and a standard deviation of 21 microm were obtained. The beads were also subjected to some preliminary tests regarding cytotoxicity. The copolymer of MMA and 1 contains covalently bound iodine. Therefore, the material is intrinsically radiopaque, i.e., capable of absorbing X-radiation while no contrast additive is needed. Our interest in these microspheres stems primarily from their possible utility as injectable and afterward traceable (radiopaque) bulking agents, e.g., for use in urology for the treatment of female stress incontinence due to sphincter deficiency. As a first test into this direction, a sample of the microbeads was mixed with ethylene glycol, and the resulting suspension was studied with respect to injectability and radiopacity. The results suggest that the radiopaque microbeads may provide access to improved bulking agents. Further modification of the surface may be necessary in order to suppress the migratory aptitude of the radiopaque polymeric microspheres in vivo.     

Structure and properties of silk hydrogels

Control of silk fibroin concentration in aqueous solutions via osmotic stress was studied to assess relationships to gel formation and structural, morphological, and functional (mechanical) changes associated with this process. Environmental factors potentially important in the in vivo processing of aqueous silk fibroin were also studied to determine their contributions to this process. Gelation of silk fibroin aqueous solutions was affected by temperature, Ca(2+), pH, and poly(ethylene oxide) (PEO). Gelation time decreased with increase in protein concentration, decrease in pH, increase in temperature, addition of Ca(2+), and addition of PEO. No change of gelation time was observed with the addition of K(+). Upon gelation, a random coil structure of the silk fibroin was transformed into a beta-sheet structure. Hydrogels with fibroin concentrations >4 wt % exhibited network and spongelike structures on the basis of scanning electron microscopy. Pore sizes of the freeze-dried hydrogels were smaller as the silk fibroin concentration or gelation temperature was increased. Freeze-dried hydrogels formed in the presence of Ca(2+) exhibited larger pores as the concentration of this ion was increased. Mechanical compressive strength and modulus of the hydrogels increased with increase in protein concentration and gelation temperature. The results of these studies provide insight into the sol-gel transitions that silk fibroin undergoes in glands during aqueous processing while also providing important insight in the in vitro processing of these proteins into useful new materials.     

Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for adipose tissue regeneration

An injectable, biodegradable and glucose-responsive hydrogel derived from natural polysaccharide derivatives was synthesized to deliver adipogenic factor of insulin in vitro for adipose tissue engineering. The biodegradable hydrogel based N-succinyl-chitosan (SCS) and aldehyde hyaluronic acid (AHA) with covalently conjugated glucose oxidase and catalase. The gelation is attributed to the Schiff-base reaction between amino and aldehyde groups of SCS and AHA, respectively. The morphologies and compressive modulus of the freeze-dried hydrogels demonstrated that the incorporated insulin and enzymes results in the formation of a tighter network structure in composite hydrogels. The immobilized enzymes triggered conversion of glucose reduces the pH value of the microenvironment, and results in hydrolysis and increasing swelling of the network basing on Schiff-base cross-linking. The pH inside the hydrogel, kept in PBS solution at pH 7.4 and 37oC, linearly dropped from 7.40 to 7.17 during 4 h of initial period, then slowly increased to 7.36 after 24 h. Correspondingly, the swelling ratio increased from 20.8 to 28.6 at 37oC in PBS with 500 mg/dL glucose. In PBS buffer with 500mg/dL glucose, about 10.8 % of insulin was seen to be released from the hydrogel after 8 h of incubation. The results demonstrated that the adipogenic factor of insulin would be released from this biodegradable hydrogel device into the local microenvironment in a controlled fashion by the swelling of hydrogel network. These preliminary studies indicate that the biodegradable and glucose-responsive hydrogel may have potential uses in adipose tissue engineering applications.     

Development of lipid A-imprinted polymer hydrogels that selectively recognize lipopolysaccharides

To remove lipopolysaccharide (LPS) from pure water, we developed polymer hydrogels that selectively recognize LPS. A molecular imprinting technique was used to prepare the polymer hydrogels. We prepared the polymer hydrogels with LPS-binding sites by using acryloyllysine and acryloylphenylalanine as functional monomers and used lipid A as a template because it is the biologically active part of LPS and contains two phosphate groups. Co-existence of n-octane during the polymerization process was highly effective in promoting the formation of LPS-accessible sites on the surface of the hydrogels. Both an electrostatic and a hydrophobic interaction between the lipid A portion of LPS and the recognition site of the imprinted hydrogel are necessary for LPS recognition. The adsorption isotherm of LPS to the lipid A-imprinted hydrogels was Langmuir-type; the saturated adsorption capacity and the adsorption constant, calculated by applying an equation for Langmuir-type adsorption isotherms, were 1.0×10(-11)mol/cm(2) and 2.5×10(5)M(-1), respectively. The imprinted hydrogels selectively recognized toxic LPS in a competition experiment in which two other kinds of LPS with similar chemical structures to that of the LPS of E. coli (toxic LPS) were adsorbed to the lipid A-imprinted hydrogels.     

FVII dependent coagulation activation in citrated plasma by polymer hydrogels

Polymer hydrogels containing positively charged functional groups were used to investigate the critical material and biological components of FVII activation and subsequent fibrin formation in citrated plasma. A FVIIa ELISA confirmed the ability of the polymer to induce FVII activation and provided insight into the material parameters which were influential in this activation. Experiments utilizing coagulation factor depleted and inhibited plasmas indicated that FVII, FX, FII, and FI are all vital to the process outlining the general mechanism of fibrin formation from the onset of FVII activation. Dynamic mechanical analysis and swelling experiments were used to establish a critical correlation between polymer microstructure and FVII activation.     

负载噬菌体内溶素Lys84水凝胶的制备及性能表征

探究聚(N-异丙基丙烯酰胺)[poly(N-isopropylacrylamide)]基互穿网络(interpenetrating polymer network)温敏水凝胶(记作:IPNT)作为噬菌体内溶素Lys84递送载体的可行性,及载药水凝胶作为抗菌材料的应用潜力。以海藻酸钠和N-异丙基丙烯酰胺为原材料,通过自由基聚合的方法制备互穿网络温敏水凝胶,采用干态浸泡法负载金黄色葡萄球菌(Staphylococcus aureus)噬菌体内溶素Lys84获得载药水凝胶(IPNT-Lys84)。通过红外光谱仪、扫描电子显微镜(scanning electron microscopy,SEM)、差示扫描量热仪(differential scanning calorimetry,DSC)对水凝胶载药前后的物理性能进行表征,并研究水凝胶溶胀、退溶胀以及内溶素Lys84释放情况、在不同温度及不同浓度药液浸泡的抗菌性能。结果表明,IPNT-Lys84水凝胶孔洞均匀,低临界溶解温度(lower critical solution temperature,LCST)为32°C;水凝胶平衡溶胀度为30 g/g,退溶胀时失水率为88%;在37°C时内溶素释放率在6 h内达到70%以上;IPNT-Lys84水凝胶杀菌率达99.9%以上。研究表明,采用IPNT递送内溶素Lys84具有可行性,IPNT-Lys84水凝胶有望成为针对多重耐药金黄色葡萄球菌的有效抗菌材料。     

Injectable biodegradable hydrogels for embryonic stem cell transplantation: improved cardiac remodelling and function of myocardial infarction

In this study, an injectable, biodegradable hydrogel composite of oligo[poly(ethylene glycol) fumarate] (OPF) was investigated as a carrier of mouse embryonic stem cells (mESCs) for the treatment of myocardial infarction (MI). The OPF hydrogels were used to encapsulate mESCs. The cell differentiation in vitro over 14 days was determined via immunohistochemical examination. Then, mESCs encapsulated in OPF hydrogels were injected into the LV wall of a rat MI model. Detailed histological analysis and echocardiography were used to determine the structural and functional consequences after 4 weeks of transplantation. With ascorbic acid induction, mESCs could differentiate into cardiomyocytes and other cell types in all three lineages in the OPF hydrogel. After transplantation, both the 24-hr cell retention and 4-week graft size were significantly greater in the OPF + ESC group than that of the PBS + ESC group (P < 0.01). Four weeks after transplantation, OPF hydrogel alone significantly reduced the infarct size and collagen deposition and improved the cardiac function. The heart function and revascularization improved significantly, while the infarct size and fibrotic area decreased significantly in the OPF + ESC group compared with that of the PBS + ESC, OPF and PBS groups (P < 0.01). All treatments had significantly reduced MMP2 and MMP9 protein levels compared to the PBS control group, and the OPF + ESC group decreased most by Western blotting. Transplanted mESCs expressed cardiovascular markers. This study suggests the potential of a method for heart regeneration involving OPF hydrogels for stem cell encapsulation and transplantation.     

Superporous IPN hydrogels having enhanced mechanical properties

The objective of this study was to improve the mechanical properties of superporous hydrogels (SPHs), which were used to develop gastric retention devices for long-term oral drug delivery. The main approach used in this study was to form an interpenetrating polymer network by incorporating a second polymer network inside an SPH structure. Polyacrylonitrile was used as the second network inside an SPH. Mechanical properties including compression strength and elasticity were significantly improved, up to 50 times as compared with the control SPHs. The enhanced mechanical properties were a result of the scaffold-like fiber network structures formed inside the cell walls of SPHs. The fast swelling property of SPHs was not affected by the incorporation of the second polymer network because the interconnected pore structures were maintained. Gastric retention devices based on superporous IPN hydrogels (SPIHs) with the improved mechanical properties are expected to withstand compression pressure and mechanical frictions in the stomach better than the control SPHs.     

pH-sensitive starch hydrogels via free radical graft copolymerization,synthesis and properties

Natural polymers are considered high value polymeric materials because of their potential as biocompatible materials with medical applications. The chemical modification of natural polymers by grafting has received considerable attention in recent years because of the wide variety of monomers available. As the first part of a continued research on conversion of carboxymethyl starch (CMS) to useful biopolymer-based materials, large numbers of carboxylic functional groups were introduced onto CMS by grafting with polymethacrylic acid (PMAA). Free radical graft copolymerization was carried out at 70 °C, bis-acrylamide as a crosslinking agent and persulfate as an initiator. Equilibrium swelling studies were carried out in enzyme-free simulated gastric and intestinal fluids (SGF and SIF, respectively). Also, the sodium dicofenac as a model drug was entrapped in these nano-gels and the in vitro release profiles were established separately in both enzyme-free SGF and SIF. The drug release was found to be faster in SIF. The drug-release profiles indicate that amount drug release depends on their degree of swelling, and crosslinking. This hydrogel converted to nano by freeze-drying method and characterized by scanning electron microscopy, differential scanning calorimetry and FT-IR spectrometry.     

Synthesis and properties of carboxymethylchitosan hydrogels modified with poly(ester-urethane)

Preparation and properties of carboxymethylchitosan (CMC) modified with polyurethane (PU) containing poly(ethylene adipate) (PEA) as a soft segment is described. Urethane prepolymer was first synthesized by the reaction of PEA with an excess of 1,6-hexamethylene diisocyanate (HDI) to terminate its ends with isocyanate functional groups, followed by chain extension reaction using ethylene glycol as a chain extender. Its chemical structure was characterized by ¹H NMR and FTIR, molecular weight by GPC, and thermal behavior by DSC. To prepare PU-modified CMC (CMC-PU), 1–60 wt% of PU were introduced into the CMC solution of THF:H₂O mixture (50:50 v/v) in the presence of 10 wt% of hexamethylene-1,6-di-(aminocarboxysulfonate) (HDA) to increase network density. Formation of the network structure was confirmed by investigating percent crosslinking and water swelling properties of CMC-PU compared to CMC network without PU. When percent of PU increased from 1 to 60 wt%, percent crosslinking of CMC-PU gradually increased up to 82%, whereas equilibrium water content (EWC) dropped and retained at 1000%. SEM showed microphase separation of PU (10–50 μm) thoroughly dispersed in CMC surface and in the bulk. In addition, CMC-PU exhibited a slight enhancement in toughness properties. Cytotoxicity and biocompatibility tests indicated that CMC-PU was non-toxic.     

Viscoelastic properties of dispersed chitosan/xanthan hydrogels

In this work a gel was formed by complexation of two natural polyelectrolytes, chitosan and xanthan. Changes in the hydrogels rheological properties have been studied in terms of hydrogel concentration (7–10% w/w), chemical media used for the hydrogel dispersion, and ‘test lag time’; i.e., the time between hydrogel dispersion in the chemical media and the start of the rheological test (up to 390 min). The viscoelastic properties of this polysaccharide system were characterized by oscillatory shear measurements under small-deformation conditions and the results show that chitosan/xanthan hydrogels behave like weak gels. The shear modulus increased almost linearly with frequency in the range studied (0.1–65 s⁻¹). The effects of hydrogel concentration and dispersion medium have been related to electrostatic equilibrium and by the presence of counter-ions modifying the internal structure of the hydrogel.     

Swelling behavior and morphological evolution of mixed gelatin/silk fibroin hydrogels

Mixed protein-based hydrogels have been prepared by blending gelatin (G) with amorphous Bombyx mori silk fibroin (SF) and promoting beta-crystallization of SF via subsequent exposure to methanol or methanol/water solutions. The introduction of beta crystals in SF serves to stabilize the hydrogel network and extend the solidlike behavior of these thermally responsive materials to elevated temperatures beyond the helix-->coil (h-->c) transition of G. In this work, we investigate the swelling and protein release kinetics of G/SF hydrogels varying in composition at temperatures below and above the G h-->c transition. At 20 degrees C, G and G-rich mixed hydrogels display evidence of moderate swelling with negligible mass loss in aqueous solution, resulting in porous polymer matrixes upon solvent removal according to electron microscopy. When the solution temperature is increased beyond the G h-->c transition to body temperature (37 degrees C), these gels exhibit much higher swelling with considerable mass loss due to dissolution and release of G. The extent to which these properties respond to temperature decreases systematically with increasing SF content. The unique temperature- and composition-dependent properties of G/SF hydrogels dictate the efficacy of these novel materials as stimuli-responsive delivery vehicles.