Somatic nuclear division in the sporidia of Ustilago violacea. III. Ultrastructural observations.

The paper provides detailed ultrastructural observations on nuclear division in the smut fungus Ustilago violacea and is based on previous light-microscopic work outlining the division in living and stained cells. The division as in many other Basidiomycetes is not intranuclear, but occurs within a partially disrupted membrane. The division takes place after migration of most of the nucleus into the bud cell, after limited breakdown of the nuclear membrane, and after the formation of a spindle between two spindle-pole bodies (SPB). The remaining part of the nucleus containing the nucleolus is left behind in the parent cell and degenerates there. The SPB, as in other Basidiomycetes, is a dome-shaped relatively structureless body, quite distinct from the flat plaques of many Ascomycetes and the elaborat centrioles of Phycomycetes. The SPB divides shortly before migration into the daughter cell and invariably is located at the apex of the migrating nucleus. Nuclear division is completed when the two masses of chromatin clustered about each of the SPB's are separated as the spindle elongates. One daughter neculeus reforms in the bud and the other is reformed in the mother cell. Cells fixed and stained by conventional light-microscopic methods were examined in the light of the electron-microscopic observations to determine whether these procedures induce artefacts. Aceto-orcein and Giemsa when used cold were found to produce relatively artefact-free preparations. However, previous results in which the cells were warmed gently in these stains are now seen to contain artefacts in the form of contracted chromatinic granules often arranged in chains. These artefacts may provide useful information but clearly they must be interpreted cautiously until the nature of the changes induced by heating are known.     

Light and electron microscopic studies of meiosis in the basidia ofPholiota terrestris

Summary The two division of meiosis that occur in the distal portion of the basidia ofPholiota terrestris were studied with light and electron microscopy. A diglobular spindle pole body (SPB), consisting of two globular elements and a connecting, electron-dense middle piece, is closely attached to the nuclear envelope of the fusion nucleus. During prometaphase I the globular elements separate and pass to the opposite poles as the chiastic spindle is formed. Evidently, the middle piece also separates with each resulting half persisting as an eccentric, electron-dense portion of the monoglobular SPB of meta-, ana-, and telophase nuclei. Also during prometaphase I, the nuclear envelope becomes discontinuous, especially in the lower region of the spindle. Light microscopic evidence of nucleolar extrusion at prometaphase I and II was observed. At metaphase I the SPB's move away from the condensed chromatic mass as the chromatids move asynchronously along the expanding spindle, evidently, due both to the elongation of the continuous fibers and the shortening of the chromosomal fibers. Two images resembling typical kinetochroes are illustrated in anaphase I nuclei, and others were seen during the study. At early telophase I and II the nuclear envelope is present laterally, is then formed in the interpolar region, and eventually appears between the chromatin and monoglobular SPB. A perforated ER cap, which is penetrated by microtubules, delimits the SPB. The nucleus enlarges, the chromatin becomes diffused except adjacent to the SPB, and the perinuclear ER becomes uniformly oriented around the nuclear envelope. At interphase I a diglobular SPB was not clearly documented. During interphase I the ER cap disappears but the perinuclear ER persists. Division II, with the exception of prophase, is essentially identical to division I. The postmeiotic, haploid nuclei migrate to the median or proximal region of the basidium. The diglobular SPB reappears. The meiotic apparatus inP. terrestris is considered to have the same fundamental features as those of plants and animals and in detail conforms to the pattern described in several light and electron microscopic studies of other Homobasidiomycetes.     

The spindle pole body of Schizosaccharomyces pombe enters and leaves the nuclear envelope as the cell cycle proceeds.

The cycle of spindle pole body (SPB) duplication, differentiation, and segregation in Schizosaccharomyces pombe is different from that in some other yeasts. Like the centrosome of vertebrate cells, the SPB of S. pombe spends most of interphase in the cytoplasm, immediately next to the nuclear envelope. Some gamma-tubulin is localized on the SPB, suggesting that it plays a role in the organization of interphase microtubules (MTs), and serial sections demonstrate that some interphase MTs end on or very near to the SPB. gamma-Tubulin is also found on osmiophilic material that lies near the inner surface of the nuclear envelope, immediately adjacent to the SPB, even though there are no MTs in the interphase nucleus. Apparently, the MT initiation activities of gamma-tubulin in S. pombe are regulated. The SPB duplicates in the cytoplasm during late G2 phase, and the two resulting structures are connected by a darkly staining bridge until the mitotic spindle forms. As the cell enters mitosis, the nuclear envelope invaginates beside the SPB, forming a pocket of cytoplasm that accumulates dark amorphous material. The nuclear envelope then opens to form a fenestra, and the duplicated SPB settles into it. Each part of the SPB initiates intranuclear MTs, and then the two structures separate to lie in distinct fenestrae as a bipolar spindle forms. Through metaphase, the SPBs remain in their fenestrae, bound to the polar ends of spindle MTs; at about this time, a small bundle of cytoplasmic MTs forms in association with each SPB. These MTs are situated with one end near to, but not on, the SPBs, and they project into the cytoplasm at an orientation that is oblique to the simple axis. As anaphase proceeds, the nuclear fenestrae close, and the SPBs are extruded back into the cytoplasm. These observations define new fields of enquiry about the control of SPB duplication and the dynamics of the nuclear envelope.     

Somatic nuclear division in the sporidia of Ustilago violacea. IV. Microtubules and the spindle-pole body.

In unbudded cells of the anther smut fungus Ustilago violacea there is a dome-shaped spindle-pole body (SPB) consisting of a core 0.1 mum in diameter surrounded by a ribosome-free region 0.3-0.4 mum in diameter lying in a pocket of the nuclear membrane. After budding the nucleus moves towards the bud and begins to rotate rapidly. At about this stage the SPB divides into two parallel bars each about 0.1-0.15 mum in diameter and 0.3 mum long, separated by a distance of about 0.3 mum. Microtubules associated with the nuclear membrane but not with the SPB are present at the time of nuclear rotation. These microtubules disappear when rotation stops. Microtubules attached to the SPB are found during migration of the chromatinic portion of the nucleus into the bud cell. These microtubules disappear when migration stops and the nuclear membrand begins to break down. The twin SPB bars appear to move into the nucleus through a break in the membrane and begin to move apart forming a spindle about 1 mum long. Chromosomal microtubules (one per kinetochore) were found in several serial sections, and in addition there appeared to be several continuous microtubules present. The separation of the two chromatinic masses appeared to result from elongation of the continuous microtubules to about 3 mum long. Cytoplasmic microtubules and spindle microtubules were both found attached to the SPB as it elongated and one nucleus returned to the mother cell. The paper concludes with a discussion of the SPB as a multifuncitonal control center affecting nuclear migration, spindle formation, membrane breakdown and synthesis, karyogamy, conjugation, budding, chromosomal movement, replication, and disjunction.     

Asymmetric mitotic segregation of the yeast spindle pole body.

The yeast KAR1 gene is required for spindle pole body (SPB) duplication and nuclear fusion. We determine here that KAR1-beta-galactosidase hybrid proteins localize to the outer face of the SPB. Remarkably, after SPB duplication, the hybrid protein was found associated with only one of the two SPBs, usually the one that enters the bud. Using an ndc1 mutant, which forms a defective SPB at the nonpermissive temperature, we found that the hybrid was exclusively associated with the "new" SPB. Two regions of KAR1 contribute to its localization; an internal 70 residue region was necessary and sufficient to localize hybrids to the SPB, and the hydrophobic carboxyl terminus localized proteins to the nuclear envelope. The localization domains correspond to two functional domains required for SPB duplication. We suggest that KAR1 is anchored to the nuclear envelope and interacts with at least one other SPB component during the cell cycle.     

Meiotic proteins bqt1 and bqt2 tether telomeres to form the bouquet arrangement of chromosomes

In many organisms, meiotic chromosomes are bundled at their telomeres to form a "bouquet" arrangement. The bouquet formation plays an important role in homologous chromosome pairing and therefore progression of meiosis. As meiotic telomere clustering occurs in response to mating pheromone signaling in fission yeast, we looked for factors essential for bouquet formation among genes induced under mating pheromone signaling. This genome-wide search identified two proteins, Bqt1 and Bqt2, that connect telomeres to the spindle-pole body (SPB; the centrosome equivalent in fungi). Neither Bqt1 nor Bqt2 alone functions as a connector, but together the two proteins form a bridge between Rap1 (a telomere protein) and Sad1 (an SPB protein). Significantly, when both Bqt1 and Bqt2 are ectopically expressed in mitotic cells, they also form a bridge between Rap1 and Sad1. Thus, a complex including Bqt1 and Bqt2 is essential for connecting telomeres to the SPB.     

Localization of core spindle pole body (SPB) components during SPB duplication in Saccharomyces cerevisiae.

We have examined the process of spindle pole body (SPB) duplication in Saccharomyces cerevisiae by electron microscopy and found several stages. These include the assembly, probably from the satellite, of a large plaque-like structure, the duplication plaque, on the cytoplasmic face of the half-bridge and its insertion into the nuclear envelope. We analyzed the role of the main SPB components in the formation of these structures by identifying them from an SPB core fraction by mass spectrometry. Temperature-sensitive mutants for two of the components, Spc29p and Nud1p, were prepared to partly define their function. The composition of two of the intermediates in SPB duplication, the satellite and the duplication plaque, was examined by immunoelectron microscopy. Both contain cytoplasmic SPB components showing that duplication has already been partly achieved by the end of the preceding cell cycle when the satellite is formed. We show that by overexpression of SPB components the structure of the satellite can be changed and SPB duplication inhibited by disrupting the attachment of the plaque-like intermediate to the half-bridge. We present a model for SPB duplication where binding of SPB components to either end of the bridge structure ensures two separate SPBs.     

Spc110p: assembly properties and role in the connection of nuclear microtubules to the yeast spindle pole body.

Spc110p is an essential component of the budding yeast spindle pole body (SPB). It binds calmodulin and contains a long central coiled-coil rod which acts as a spacer element between the central plaque of the SPB and the ends of the nuclear or spindle microtubules. This suggests that the essential function of Spc110p is to connect the nuclear microtubules to the SPB. To confirm this, we examined the phenotype of ts alleles of SPC110, one of which contains a mutation in the calmodulin binding site and was suppressed by overexpression of calmodulin. The alleles fail to form a functional mitotic spindle because spindle microtubules are not properly connected to the SPB. We also examined the phenotype of the toxic overexpression of either the wild-type or a truncated version of Spc110p containing a deletion of most of the coiled-coil domain. Both of these proteins form large ordered spheroidal polymers in the nucleus. The polymerization of the truncated Spc110p appears to be initiated inside the SPB from the position where Spc110p is normally located, and as the polymer grows in size it severs the connection between the nuclear microtubules and the SPB. The polymers were purified and are composed of Spc110p and calmodulin. A model for the structure of the polymer is proposed.     

The nuclear pore complex-associated protein, Mlp2p, binds to the yeast spindle pole body and promotes its efficient assembly

The two yeast proteins Mlp1p and Mlp2p (homologues of the vertebrate protein Tpr) are filamentous proteins attached to the nuclear face of nuclear pore complexes. Here we perform a proteomic analysis, which reveals that the two Mlps have strikingly different interacting partners, testifying to their different roles within the cell. We find that Mlp2p binds directly to Spc110p, Spc42p, and Spc29p, which are three core components of the spindle pole body (SPB), the nuclear envelope-associated yeast spindle organizer. We further show that SPB function is compromised in mlp2 mutants. Cells lacking Mlp2p form significantly smaller SPBs, accumulate aberrant SPB component-containing structures inside the nucleus, and have stochastic failures of cell division. In addition, depletion of Mlp2p is synthetically lethal with mutants impaired in SPB assembly. Based on these data, we propose that Mlp2p links the SPB to the peripheral Mlp assembly, and that this linkage is required for efficient incorporation of components into the SPB.     

Ultrastructure of meiosis in the hollyhock rust fungus,Puccinia malvacearum

Summary Changes in the spindle pole body (SPB) and meiotic nuclei from interphase I through interphase II in the hollyhock rustPuccinia malvacearum are analyzed ultrastructurally by three-dimensional reconstructions from serial sections. Interphase I nuclei undergo a coordinated migration and rotation during which the SPBs approach the convex face of the lateral promycelial wall. During the transition from interphase I to prometaphase II, the collateral disc (co-disc) apparently enlarges and fuses with the main disc of the SPB. The resulting single SPB nucleates two confluent half spindles and about 225 astral microtubules (MTs). Co-discs and middle pieces (MPs) are absent during division II. SPBs separate and form metaphase II intranuclear spindles oriented in a predictable manner. Tubular cisternae are present within the spindle at early metaphase II. The architecture of the spindle at division II is essentially identical to that reported for division I except that the spindle is about half as long. Anaphase-telophase II nuclear envelope constriction, separation of the sibling nuclei, and externalization of the SPBs is identical to that reported for division I. Genesis of the duplicated interphase II SPB apparently occurs rapidly and involves formation of the MP followed by the three-layered SPB discs. General aspects of the division II spindle are discussed. A model for the meiotic SPB cycle in a rust is presented and its phylogenetic and functional significance in relation to other basidiomycetes and ascomycetes is discussed.     

Saccharomyces cerevisiae MPS2 encodes a membrane protein localized at the spindle pole body and the nuclear envelope.

The MPS2 (monopolar spindle two) gene is one of several genes required for the proper execution of spindle pole body (SPB) duplication in the budding yeast Saccharomyces cerevisiae (). We report here that the MPS2 gene encodes an essential 44-kDa protein with two putative coiled-coil regions and a hydrophobic sequence. Although MPS2 is required for normal mitotic growth, some null strains can survive; these survivors exhibit slow growth and abnormal ploidy. The MPS2 protein was tagged with nine copies of the myc epitope, and biochemical fractionation experiments show that it is an integral membrane protein. Visualization of a green fluorescent protein (GFP) Mps2p fusion protein in living cells and indirect immunofluorescence microscopy of 9xmyc-Mps2p revealed a perinuclear localization with one or two brighter foci of staining corresponding to the SPB. Additionally, immunoelectron microscopy shows that GFP-Mps2p localizes to the SPB. Our analysis suggests that Mps2p is required as a component of the SPB for insertion of the nascent SPB into the nuclear envelope.     

Microtubule organization by the budding yeast spindle pole body.

In budding yeast microtubule organizing functions are provided by the spindle pole body (SPB), a multi-layered structure that is embedded in the nuclear envelope throughout the cell cycle. The SPB organizes the nuclear and cytoplasmic microtubules which are spatially and functionally distinct. Microtubule formation in yeast requires the Tub4p-complex, containing the gamma-tubulin Tub4p, and two additional proteins, the SPB components Spc97p and Spc98p. The Tub4p complex assembles in the cytoplasm and is then anchored to the sides of the SPB which organize microtubules. This is achieved by the binding of Spc97p and Spc98p to so-called gamma-tubulin complex binding proteins (GTBPs) at the SPB. Spc72p is the yeast GTBP at the cytoplasmic side of the SPB, while Spc110p is the nuclear GTBP. Both GTBPs control the number of Tub4p complexes associated with the SPB and thereby the number of microtubules formed. In addition, the GTBPs may regulate the activity of the Tub4p complex. Homologues of Spc97p and Spc98p have been identified from yeast to mammalian cells and these are also part of gamma-tubulin complexes, suggesting that these related proteins may also interact with GTBPs at the centrosome. Candidates for GTBPs have been identified in mammalian and insect cells.     

Spindle pole body duplication: a model for centrosome duplication?

The yeast spindle pole body (SPB) is the functional equivalent of the centrosome and forms the two poles of the mitotic spindle. Before mitosis, both SPBs and centrosomes are present as single copies and must be duplicated to form the bipolar spindle. SPB components have been identified using a combination of biochemistry and genetics, and their role during SPB duplication has been analysed using temperature-sensitive mutants. In this article, we describe structural aspects of SPB duplication and their possible relationship to centrosome duplication.     

Modes of spindle pole body inheritance and segregation of the Bfa1p-Bub2p checkpoint protein complex.

Yeast spindle pole bodies (SPBs) duplicate once per cell cycle by a conservative mechanism resulting in a pre-existing 'old' and a newly formed SPB. The two SPBs of yeast cells are functionally distinct. It is only the SPB that migrates into the daughter cell, the bud, which carries the Bfa1p-Bub2p GTPase-activating protein (GAP) complex, a component of the spindle positioning checkpoint. We investigated whether the functional difference of the two SPBs correlates with the time of their assembly. We describe that in unperturbed cells the 'old' SPB always migrates into the bud. However, Bfa1p localization is not determined by SPB inheritance. It is the differential interaction of cytoplasmic microtubules with the mother and bud cortex that directs the Bfa1p-Bub2p GAP to the bud-ward-localized SPB. In response to defects of cytoplasmic microtubules to interact with the cell cortex, the Bfa1p-Bub2p complex binds to both SPBs. This may provide a mechanism to delay cell cycle progression when cytoplasmic microtubules fail to orient the spindle. Thus, SPBs are able to sense cytoplasmic microtubule properties and regulate the Bfa1p-Bub2p GAP accordingly.     

Pcp1/pericentrin controls the SPB number in fission yeast meiosis and ploidy homeostasis

During sexual reproduction, the zygote must inherit exactly one centrosome (spindle pole body [SPB] in yeasts) from the gametes, which then duplicates and assembles a bipolar spindle that supports the subsequent cell division. Here, we show that in the fission yeast Schizosaccharomyces pombe, the fusion of SPBs from the gametes is blocked in polyploid zygotes. As a result, the polyploid zygotes cannot proliferate mitotically and frequently form supernumerary SPBs during subsequent meiosis, which leads to multipolar nuclear divisions and the generation of extra spores. The blockage of SPB fusion is caused by persistent SPB localization of Pcp1, which, in normal diploid zygotic meiosis, exhibits a dynamic association with the SPB. Artificially induced constitutive localization of Pcp1 on the SPB is sufficient to cause blockage of SPB fusion and formation of extra spores in diploids. Thus, Pcp1-dependent SPB quantity control is crucial for sexual reproduction and ploidy homeostasis in fission yeast.     

Meiotic nuclear reorganization: switching the position of centromeres and telomeres in the fission yeast Schizosaccharomyces pombe.

In fission yeast meiotic prophase, telomeres are clustered near the spindle pole body (SPB; a centrosome-equivalent structure in fungi) and take the leading position in chromosome movement, while centromeres are separated from the SPB. This telomere position contrasts with mitotic nuclear organization, in which centromeres remain clustered near the SPB and lead chromosome movement. Thus, nuclear reorganization switching the position of centromeres and telomeres must take place upon entering meiosis. In this report, we analyze the nuclear location of centromeres and telomeres in genetically well-characterized meiotic mutant strains. An intermediate structure for telomere-centromere switching was observed in haploid cells induced to undergo meiosis by synthetic mating pheromone; fluorescence in situ hybridization revealed that in these cells, both telomeres and centromeres were clustered near the SPB. Further analyses in a series of mutants showed that telomere-centromere switching takes place in two steps; first, association of telomeres with the SPB and, second, dissociation of centromeres from the SPB. The first step can take place in the haploid state in response to mating pheromone, but the second step does not take place in haploid cells and probably depends on conjugation-related events. In addition, a linear minichromosome was also co-localized with authentic telomeres instead of centromeres, suggesting that telomere clustering plays a role in organizing chromosomes within a meiotic prophase nucleus.     

Ppc89 links multiple proteins, including the septation initiation network, to the core of the fission yeast spindle-pole body

The spindle-pole body (SPB), the yeast analog of the centrosome, serves as the major microtubule (MT) organizing center in the yeast cell. In addition to this central function, the SPB organizes and concentrates proteins required for proper coordination between the nuclear-division cycle and cytokinesis. For example, the Schizosaccharomyces pombe septation-initiation network (SIN), which is responsible for initiating actomyosin ring constriction and septation, is assembled at the SPB through its two scaffolding components, Sid4 and Cdc11. In an effort to identify novel SIN interactors, we purified Cdc11 and identified by mass spectrometry a previously uncharacterized protein associated with it, Ppc89. Ppc89 localizes constitutively to the SPB and interacts directly with Sid4. A fusion between the N-terminal 300 amino acids of Sid4 and a SPB targeting domain of Ppc89 supplies the essential function of Sid4 in anchoring the SIN. ppc89Delta cells are inviable and exhibit defects in SPB integrity, and hence in spindle formation, chromosome segregation, and SIN localization. Ppc89 overproduction is lethal, resulting primarily in a G2 arrest accompanied by massive enlargement of the SPB and increased SPB MT nucleation. These results suggest a fundamental role for Ppc89 in organization of the S. pombe SPB.     

Analysis of coiled-coil interactions between core proteins of the spindle pole body

The spindle pole body (SPB) is a multiprotein complex that organizes microtubules in yeast. Due to its large size and association with the nuclear membrane, little is known about its detailed structure. In particular, although many SPB components and some of the interactions between them have been identified, the molecular details of how most of these interactions occur are not known. The prevalence of predicted coiled-coil regions in SPB proteins suggests that some interactions may occur via coiled coils. Here this hypothesis is supported by biochemical characterization of isolated coiled-coil peptides derived from SPB proteins. Formation of four strongly self-associating coiled-coil complexes from Spc29, Spc42, and Spc72 was demonstrated by circular dichroism (CD) spectroscopy and a fluorescence resonance energy transfer (FRET) assay. Many weaker self- and heteroassociations were also detected by CD, FRET, and/or cross-linking. The thermal stabilities of nine candidate homooligomers were assessed; six unfolded cooperatively with melting temperatures ranging from <11 to >50 degrees C. Solution studies established that coiled-coil peptides derived from Spc42 and Spc72 form parallel dimers, and this was confirmed for Spc42 by a high-resolution crystal structure. These data contribute to a growing body of knowledge that will ultimately provide a detailed model of the SPB structure.     

Components of the yeast spindle and spindle pole body

Yeast spindle pole bodies (SPBs) with attached nuclear microtubles were enriched approximately 600-fold from yeast cell extracts. 14 mAbs prepared against this enriched SPB fraction define at least three components of the SPB and spindle. Immunofluorescent staining of yeast cells showed that throughout the cell cycle two of the components (110 and 90 kD) were localized exclusively to the SPB region, and the other (80 kD) was localized both to the SPB region and to particulate dots in short spindles. Immunoelectron microscopy confirmed and extended most of these findings. Thus the 110-kD component was localized to a layer in the SPB just to the nuclear side of the plane of the inner nuclear membrane. The 90-kD component was localized in a layer across the cytoplasmic face of intact SPBs, and, in SPBs where nuclear microtubules were removed by extraction with DEAE-dextran, the 90-kD component was also found in an inner nuclear layer close to where spindle microtubules emerge. In intact SPBs with attached nuclear microtubules the anit-80-kD mAb labels microtubules, particularly those close to the SPB. These results begin to provide a preliminary molecular map of the SPB and should also enable the corresponding genes to be isolated.     

Meiotic spindle pole bodies acquire the ability to assemble the spore plasma membrane by sequential recruitment of sporulation-specific components in fission yeast

The spindle pole body (SPB) of Schizosaccharomyces pombe is required for assembly of the forespore membrane (FSM) during meiosis. Before de novo biogenesis of the FSM, the meiotic SPB forms outer plaques, an event referred to as SPB modification. A constitutive SPB component, Spo15, plays an indispensable role in SPB modification and sporulation. Here, we analyzed two sporulation-specific genes, spo13(+) and spo2(+), which are not required for progression of meiotic nuclear divisions, but are essential for sporulation. Spo13 is a 16-kDa coiled-coil protein, and Spo2 is a 15-kDa nonconserved protein. Both Spo13 and Spo2 specifically associated with the meiotic SPB. The respective deletion mutants are viable, but defective in SPB modification and in the onset of FSM formation. Spo13 and Spo2 localized on the cytoplasmic side of the SPB in close contact with the nascent FSM. Localization of Spo13 to the SPB was dependent on Spo15 and Spo2; that of Spo2 depended only on Spo15, suggesting that their recruitment to the SPB is strictly controlled. Spo2 physically associated with both Spo15 and Spo13, but Spo13 and Spo15 did not interact directly. Taken together, these observations indicate that Spo2 is recruited to the SPB during meiosis and then assists in the localization of Spo13 to the outer surface of the SPB.