Blood‐Capillary‐Inspired,Free‐Standing,Flexible, and Low‐Cost Super‐Hydrophobic N‐CNTs@SS Cathodes for High‐Capacity,High‐Rate,and Stable Li‐Air Batteries

With the rising demand for flexible and wearable electronic devices, flexible power sources with high energy densities are required to provide a sustainable energy supply. Theoretically, rechargeable, flexible Li‐O₂/air batteries can provide extremely high specific energy densities; however, the high costs, complex synthetic methods, and inferior mechanical properties of the available flexible cathodes severely limit their practical applications. Herein, inspired by the structure of human blood capillary tissue, this study demonstrates for the first time the in situ growth of interpenetrative hierarchical N‐doped carbon nanotubes on the surface of stainless‐steel mesh (N‐CNTs@SS) for the fabrication of a self‐supporting, flexible electrode with excellent physicochemical properties via a facile and scalable one‐step strategy. Benefitting from the synergistic effects of the high electronic conductivity and stable 3D interconnected conductive network structure, the Li‐O₂ batteries obtained with the N‐CNTs@SS cathode exhibit superior electrochemical performance, including a high specific capacity (9299 mA h g^?1 at 500 mA g^?1), an excellent rate capability, and an exceptional cycle stability (up to 232 cycles). Furthermore, as‐fabricated flexible Li‐air batteries containing the as‐prepared flexible super‐hydrophobic cathode show excellent mechanical properties, stable electrochemical performance, and superior H₂O resistibility, which enhance their potential to power flexible and wearable electronic devices.     

Design,Synthesis, and Cytotoxic Activity of 3‐Aryl‐N‐hydroxy‐2‐(sulfonamido)propanamides in HepG2, HT‐1080, KB,and MCF‐7 Cells

A new series of (sulfonamido)propanamides ( 6a1 – 6a13 , 6b1 – 6b15 , 7c1 – 7c5 , 6d1 – 6d5 , 6e1 – 6e6 ) was designed and synthesized. All the synthesized compounds were characterized by NMR and mass spectrometry. The target compounds were evaluated for their in vitro cytotoxic activity against hepatocellular carcinoma (HepG2), fibrosarcoma (HT‐1080), mouth epidermal carcinoma (KB), and breast adenocarcinoma (MCF‐7) cell lines with the sulforhodamine B (SRB) assay, with gemcitabine and mitomycin C as positive controls. Most of these compounds exhibit a more potent cytotoxic effect than the positive control group on various cancer cell lines and the most potent compound, 6a7 , shows the IC₅₀ values of 29.78±0.516 μm , 30.70±0.61 μm , and 64.89±3.09 μm in HepG2, HT‐1080, KB, and MCF‐7 cell lines, respectively. Thus, these compounds with potent cytotoxic activity have potential for development as new chemotherapy agents.     

All‐Inkjet‐Printed,All‐Air‐Processed Solar Cells

The prospective of using direct‐write printing techniques for the manufacture of organic photovoltaics (OPVs) has made these techniques highly attractive. OPVs have the potential to revolutionize small‐scale portable electronic applications by directly providing electric power to the systems. However, no route is available for monolithically integrating the energy‐harvesting units into a system in which other components, such as transistors, sensors, or displays, are already fabricated. Here, the fabrication and the measurement of inkjet‐printed, air‐processed organic solar cells is reported for the first time. Highly controlled conducting and semiconducting films using engineered inks for inkjet printing enable good efficiencies for printed OPVs between ≈2 and 5% power conversion efficiency. The results show that inkjet printing is an attractive digital printing technology for cost‐effective, environmentally friendly integration of photovoltaic cells onto plastic substrates.     

Resolution of 1‐n‐Butyl‐3‐Methyl‐3‐Phospholene 1‐Oxide With TADDOL Derivatives and Calcium Salts of O,O'‐Dibenzoyl‐(2R,3R)‐ or O,O'‐di‐p‐Toluoyl‐(2R,3R)‐tartaric Acid

The resolution methods applying (?)‐(4R,5R)‐4,5‐bis(diphenylhydroxymethyl)‐2,2‐dimethyldioxolane (“TADDOL”), (?)‐(2R,3R)‐α,α,α',α'‐tetraphenyl‐1,4‐dioxaspiro[4.5]decan‐2,3‐dimethanol (“spiro‐TADDOL”), as well as the acidic and neutral Ca²⁺ salts of (?)‐O,O'‐dibenzoyl‐ and (?)‐O,O'‐di‐p‐toluoyl‐(2R,3R)‐tartaric acid were extended for the preparation of 1‐n‐butyl‐3‐methyl‐3‐phospholene 1‐oxide in optically active form. In one case, the intermediate diastereomeric complex could be identified by single‐crystal X‐ray analysis. The absolute P‐configuration of the enantiomers of the phospholene oxide was also determined by comparing the experimentally obtained and calculated CD spectra. Chirality 26:174–182, 2014. © 2014 Wiley Periodicals, Inc.     

DPP‐IV‐resistant,long‐acting oxyntomodulin derivatives

Obesity is one of the major risk factors for type 2 diabetes, and the development of agents, that can simultaneously achieve glucose control and weight loss, is being actively pursued. Therapies based on peptide mimetics of the gut hormone glucagon‐like peptide 1 (GLP‐1) are rapidly gaining favor, due to their ability to increase insulin secretion in a strictly glucose‐dependent manner, with little or no risk of hypoglycemia, and to their additional benefit of causing a modest, but durable weight loss. Oxyntomodulin (OXM), a 37‐amino acid peptide hormone of the glucagon (GCG) family with dual agonistic activity on both the GLP‐1 (GLP1R) and the GCG (GCGR) receptors, has been shown to reduce food intake and body weight in humans, with a lower incidence of treatment‐associated nausea than GLP‐1 mimetics. As for other peptide hormones, its clinical application is limited by the short circulatory half‐life, a major component of which is cleavage by the enzyme dipeptidyl peptidase IV (DPP‐IV). SAR studies on OXM, described herein, led to the identification of molecules resistant to DPP‐IV degradation, with increased potency as compared to the natural hormone. Analogs derivatized with a cholesterol moiety display increased duration of action in vivo. Moreover, we identified a single substitution which can change the OXM pharmacological profile from a dual GLP1R/GCGR agonist to a selective GLP1R agonist. The latter finding enabled studies, described in detail in a separate study (Pocai A, Carrington PE, Adams JR, Wright M, Eiermann G, Zhu L, Du X, Petrov A, Lassman ME, Jiang G, Liu F, Miller C, Tota LM, Zhou G, Zhang X, Sountis MM, Santoprete A, Capitò E, Chicchi GG, Thornberry N, Bianchi E, Pessi A, Marsh DJ, SinhaRoy R. Glucagon‐like peptide 1/glucagon receptor dual agonism reverses obesity in mice. Diabetes 2009; 58: 2258–2266), which highlight the potential of GLP1R/GCGR dual agonists as a potentially superior class of therapeutics over the pure GLP1R agonists currently in clinical use. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Novel N‐Acyl‐1H‐imidazole‐1‐carbothioamides: Design,Synthesis, Biological and Computational Studies

The present study reports the convenient synthesis, spectroscopic characterization, bio‐assays and computational evaluation of a novel series of N‐acyl‐1H‐imidazole‐1‐carbothioamides. The screened derivatives displayed excellent antioxidant activity, moderate antibacterial and antifungal potential. The screened derivatives were found to be highly biocompatible against hRBCs. Molecular docking ascertained the mechanism and mode of action towards the molecular target delineating that ligands and complexes were stabilized at the active site by electrostatic and hydrophobic forces in accordance to the corresponding experimental results. Docking simulation provided additional information about the possibilities of inhibitory potential of the compounds against RNA. Computational evaluation predicted that N‐acyl‐1H‐imidazole‐1‐carbothioamides 5c and 5g can serve as potential surrogates for hit to lead generation and design of novel antioxidant and antibacterial agents.     

Cupryphans,metal‐binding,redox‐active,redesigned conopeptides

Contryphans are bioactive peptides, isolated from the venom of marine snails of the genus Conus, which are characterized by the short length of the polypeptide chain and the high degree of unusual post‐translational modifications. The cyclization of the polypeptide chain through a single disulphide bond, the presence of two conserved Pro residues, and the epimerization of a Trp/Leu residue confer to Contryphans a stable and well‐defined structure in solution, conserved in all members of the family, and tolerant to multiple substitutions. The potential of Contryphans as scaffolds for the design of redox‐active (macro)molecules was tested by engineering a copper‐binding site on two different variants of the natural peptide Contryphan‐Vn. The binding site was designed by computational modeling, and the redesigned peptides were synthesized and characterized by optical, fluorescence, electron spin resonance, and nuclear magnetic resonance spectroscopy. The novel peptides, named Cupryphan and Arg–Cupryphan, bind Cu²⁺ ions with a 1:1 stoichiometry and a K_d in the 100 nM range. Other divalent metals (e.g., Zn²⁺ and Mg²⁺) are bound with much lower affinity. In addition, Cupryphans catalyze the dismutation of superoxide anions with an activity comparable to other nonpeptidic superoxide dismutase mimics. We conclude that the Contryphan motif represents a natural robust scaffold which can be engineered to perform different functions, providing additional means for the design of catalytically active mini metalloproteins.     

Mark‐resight abundance and survival estimation of Indo‐Pacific bottlenose dolphins,Tursiops aduncus,in the Swatch‐of‐No‐Ground,Bangladesh

A mark‐resight analysis under Pollock's robust design was applied to Indo‐Pacific bottlenose dolphins Tursiops aduncus in the Swatch‐of‐No‐Ground (SoNG) submarine canyon, Bangladesh, during the winter seasons of 2005–2009. Information from sightings of photo‐identified individuals (1,144) and unmarked individuals generated abundance estimates of 1,701 (95% confidence interval [CI]= 1,533–1,888), 1,927 (95% CI = 1,851–2,006), 2,150 (95% CI = 1,906–2,425), and 2,239 (95% CI = 1,985–2,524) individuals for seasons 1–4, respectively. This makes the population among the largest assessed of the species. Overall apparent survival was estimated as 0.958 (95% CI = 0.802–0.992). Interseasonal probabilities of transitioning to an unobservable state were estimated as 0.045, 0.363, and 0.300 for years 1–2, 2–3, and 3–4, respectively, and the overall probability of remaining in an unobservable state was 0.688. These probabilities, together with an apparent increase in abundance during the study period, indicate that the identified dolphins are part of a larger superpopulation moving throughout a more extensive geographic area. Of the photo‐identified dolphins, 28.2% exhibited injuries related to entanglements with fishing gear. This implies a strong potential for fatal interactions that could jeopardize the conservation status of the population, which otherwise appears favorable.     

The evaluation of acute toxicity,antimicrobial activity of 1‐phenyl‐5‐p‐tolyl‐1H‐1, 2, 3‐triazole,and binding to human serum albumin

1‐Phenyl‐5‐p‐tolyl‐1H‐1, 2, 3‐triazole (PPTA) was a synthesized compound. The result of acute toxicities to mice of PPTA by intragastric administration indicated that PPTA did not produce any significant acute toxic effect on Kunming strain mice. It exhibited the various potent inhibitory activities against two kinds of bananas pathogenic bacteria, black sigatoka and freckle, when compared with that of control drugs and the inhibitory rates were up to 64.14% and 43.46%, respectively, with the same concentration of 7.06 mM. The interaction of PPTA with human serum albumin (HSA) was studied using fluorescence polarization, absorption spectra, 3D fluorescence, and synchronous spectra in combination with quantum chemistry and molecular modeling. Multiple modes of interaction between PPTA and HSA were suggested to stabilize the PPTA–HSA complex, based on thermodynamic data and molecular modeling. Binding of PPTA to HSA induced perturbation in the microenvironment around HSA as well as secondary structural changes in the protein.     

Synthesis and characterizations of iso‐luminol‐functionalized,tadpole‐shaped,gold nanomaterials

Iso‐luminol functionalized gold nanomaterials were synthesized in high yield by a simple seeding approach, using the chemiluminescent reagent iso‐luminol as reductant in the presence of HAuCl₄, AgNO₃ and cetyltrimethylammonium bromide (CTAB). The morphology of as‐prepared gold nanoparticles was characterized by transmission electron microscopy and UV–vis spectroscopy, showing that gold nanotadpoles (AuNTps) were obtained. Subsequent experiments revealed that the amounts of seed colloids and AgNO₃ and the concentrations of iso‐luminol and CTAB in the growth solution play critical roles in the formation of well‐shaped AuNTps. The surface state of AuNTps was characterized by UV–vis spectroscopy and fluorescence spectroscopy, indicating that iso‐luminol and its oxidation product, 4‐aminophthalate, coexisted on the surface of AuNTps. The CL behaviour was studied by static injection CL experiments, demonstrating that AuNTps were of CL activity. Finally, the growth mechanism of AuNTps was also discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Alkaline Polymer Membrane‐Based Ultrathin,Flexible, and High‐Performance Solid‐State Zn‐Air Battery

The increasing demand for portable and wearable electronics requires lightweight, thin, and highly flexible power sources, for example, flexible zinc‐air batteries (ZABs). The so‐far reported flexible ZAB devices mostly remain bulky, with a design consisting of two relatively thick substrates (e.g., carbon cloths and/or metal foams) and a gel electrolyte‐coated separator in between. Herein, an ultrathin (≈0.2 mm) solid‐state ZAB with high flexibility and performance is introduced by directly forming self‐standing active layers on each surface of an alkaline polymer membrane through an ink‐casting/hot‐pressing approach. A Fe/N‐doped 3D carbon with hierarchic pores and an interconnected network structure is used as cathode electrocatalyst, so that the backing gas‐diffusion layer (e.g., carbon cloth) can be abandoned. What is further, a microstructure‐modulating method to significantly increase the FeN₄ active sites for oxygen reduction reaction is developed, thus significantly boosting the performance of the ZAB. The assembled solid‐state ZAB manifests remarkable peak power density of 250 mW cm^?3 and high capacity of 150.4 mAh cm^?3 at 8.3 mA cm^?3, as well as excellent flexibility. The new design should provide valuable opportunity to the portable and wearable electronics.     

Structure‐Controlled,Vertical Graphene‐Based,Binder‐Free Electrodes from Plasma‐Reformed Butter Enhance Supercapacitor Performance

Vertical graphene nanosheets (VGNS) hold great promise for high‐performance supercapacitors owing to their excellent electrical transport property, large surface area and in particular, an inherent three‐dimensional, open network structure. However, it remains challenging to materialise the VGNS‐based supercapacitors due to their poor specific capacitance, high temperature processing, poor binding to electrode support materials, uncontrollable microstructure, and non‐cost effective way of fabrication. Here we use a single‐step, fast, scalable, and environmentally‐benign plasma‐enabled method to fabricate VGNS using cheap and spreadable natural fatty precursor butter, and demonstrate the controllability over the degree of graphitization and the density of VGNS edge planes. Our VGNS employed as binder‐free supercapacitor electrodes exhibit high specific capacitance up to 230 F g^?1 at a scan rate of 10 mV s^?1 and >99% capacitance retention after 1,500 charge‐discharge cycles at a high current density, when the optimum combination of graphitic structure and edge plane effects is utilised. The energy storage performance can be further enhanced by forming stable hybrid MnO₂/VGNS nano‐architectures which synergistically combine the advantages from both VGNS and MnO₂. This deterministic and plasma‐unique way of fabricating VGNS may open a new avenue for producing functional nanomaterials for advanced energy storage devices.     

LncRNA‐MIF,a c‐Myc‐activated long non‐coding RNA,suppresses glycolysis by promoting Fbxw7‐mediated c‐Myc degradation

The c‐Myc proto‐oncogene is activated in more than half of all human cancers. However, the precise regulation of c‐Myc protein stability is unknown. Here, we show that the lncRNA‐MIF (c‐Myc inhibitory factor), a c‐Myc‐induced long non‐coding RNA, is a competing endogenous RNA for miR‐586 and attenuates the inhibitory effect of miR‐586 on Fbxw7, an E3 ligase for c‐Myc, leading to increased Fbxw7 expression and subsequent c‐Myc degradation. Our data reveal the existence of a feedback loop between c‐Myc and lncRNA‐MIF, through which c‐Myc protein stability is finely controlled. Additionally, we show that the lncRNA‐MIF inhibits aerobic glycolysis and tumorigenesis by suppressing c‐Myc and miR‐586.     

A post‐translational,c‐di‐GMP‐dependent mechanism regulating flagellar motility

Elevated levels of the second messenger cyclic dimeric GMP, c‐di‐GMP, promote transition of bacteria from single motile cells to surface‐attached multicellular communities. Here we describe a post‐translational mechanism by which c‐di‐GMP initiates this transition in enteric bacteria. High levels of c‐di‐GMP induce the counterclockwise bias in Escherichia coli flagellar rotation, which results in smooth swimming. Based on co‐immunoprecipitation, two‐hybrid and mutational analyses, the E. coli c‐di‐GMP receptor YcgR binds to the FliG subunit of the flagellum switch complex, and the YcgR–FliG interaction is strengthened by c‐di‐GMP. The central fragment of FliG binds to YcgR as well as to FliM, suggesting that YcgR–c‐di‐GMP biases flagellum rotation by altering FliG‐FliM interactions. The c‐di‐GMP‐induced smooth swimming promotes trapping of motile bacteria in semi‐solid media and attachment of liquid‐grown bacteria to solid surfaces, whereas c‐di‐GMP‐dependent mechanisms not involving YcgR further facilitate surface attachment. The YcgR–FliG interaction is conserved in the enteric bacteria, and the N‐terminal YcgR/PilZN domain of YcgR is required for this interaction. YcgR joins a growing list of proteins that regulate motility via the FliG subunit of the flagellum switch complex, which suggests that FliG is a common regulatory entryway that operates in parallel with the chemotaxis that utilizes the FliM‐entryway.