生物可降解微球作为乙型肝炎基因免疫佐剂的研究

探讨生物可降解微球对基因免疫的增强作用。采用有机溶剂蒸发法制备聚乳酸聚乙醇酸共聚 物（ＰＬＧＡ）微球,构建含有乙型肝炎病毒表面抗原Ｓ基因的ｐＲＣ－ＣＭＶ真核表达载体,用微球与基因 载体共孵育法制备其混合物。肌肉注射免疫Ｂａｌｂ／ｃ小鼠。结果表明：微球注射组的血清抗体滴度达到 ｌ：１６００,其效果与乙型肝炎病毒表面抗原加铝佐剂注射组相近,而裸ＤＮＡ注射组没有反应。说明了 生物可降解微球可显著的提高基因免疫的免疫反应。     

Gene delivery using biodegradable polyelectrolyte microcapsules prepared through the layer-by-layer technique

Biodegradable and non‐biodegradable microcapsules were prepared via the layer‐by‐layer (LbL) technique consisting of the polyelectrolyte pairs of dextran sulphate/poly‐L ‐arginine and poly(styrene sulfonate)/poly(allylamine hydrochloride), respectively, in an attempt to encapsulate plasmid DNA (pDNA) for efficient transfection into NIH 3T3 cells. Results indicated the retention of bioactivity in the encased pDNA, as well as a correlation between the level of in vitro gene expression and biodegradability properties of polyelectrolyte. Furthermore, the incorporation of iron oxide nanoparticles within the polyelectrolyte layers significantly improved the in vitro transfection efficiency of the microcapsules. As a novel pDNA delivery system, the reported biodegradable microcapsules provide useful insight into plasmid‐based vaccination and where there is a prerequisite to deliver genes into cells capable of phagocytosis. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 1088–1094, 2012     

Incorporation of proteins into polyelectrolyte microcapsules by coprecipitation and adsorption

Microcapsules composed of synthetic (sodium polystyrene sulfonate and polyallylamine hydrochloride) and biodegradable polyelectrolytes (dextran sulfate and polyarginine hydrochloride) deposited on carbonate microparticles have been obtained. The ultrastructural organization of biodegradable microcapsules has been studied by transmission electron microscopy. The shell of biodegradable microcapsules is well formed even after the deposition of six polyelectrolyte layers and has an average thickness of 44 ± 3.0 nm; their inner polyelectrolyte matrix is less branched than that of synthetic microcapsules. By using spectroscopy, the efficiency of the encapsulation of FITC-labeled BSA by adsorption depending on the number of PE layers in the capsule has been estimated. It has been shown that the maximum amount of the protein is incorporated into capsules comprising six and seven polyelectrolyte layers (4 and 2 pg/capsule, respectively). It has been concluded that the adsorption of proteins into preformed polyelectrolyte capsules enables one to avoid protein losses that occur with the method in which biomineral cores obtained by coprecipitation are used for encapsulation.     

Process considerations related to the microencapsulation of plasmid DNA via ultrasonic atomization

An effective means of facilitating DNA vaccine delivery to antigen presenting cells is through biodegradable microspheres. Microspheres offer distinct advantages over other delivery technologies by providing release of DNA vaccine in its bioactive form in a controlled fashion. In this study, biodegradable poly(D,L-lactide-co-glycolide) (PLGA) microspheres containing polyethylenimine (PEI) condensed plasmid DNA (pDNA) were prepared using a 40 kHz ultrasonic atomization system. Process synthesis parameters, which are important to the scale-up of microspheres that are suitable for nasal delivery (i.e., less than 20 microm), were studied. These parameters include polymer concentration; feed flowrate; volumetric ratio of polymer and pDNA-PEI (plasmid DNA-polyethylenimine) complexes; and nitrogen to phosphorous (N/P) ratio. PDNA encapsulation efficiencies were predominantly in the range 82-96%, and the mean sizes of the particle were between 6 and 15 microm. The ultrasonic synthesis method was shown to have excellent reproducibility. PEI affected morphology of the microspheres, as it induced the formation of porous particles that accelerate the release rate of pDNA. The PLGA microspheres displayed an in vitro release of pDNA of 95-99% within 30 days and demonstrated zero order release kinetics without an initial spike of pDNA. Agarose electrophoresis confirmed conservation of the supercoiled form of pDNA throughout the synthesis and in vitro release stages. It was concluded that ultrasonic atomization is an efficient technique to overcome the key obstacles in scaling-up the manufacture of encapsulated vaccine for clinical trials and ultimately, commercial applications.     

Chitosan microcapsules loaded with either miconazole nitrate or clotrimazole,prepared via emulsion technique

In this paper, a simple and versatile coacervation technique has been developed by using an ultrasound-assisted oil/water emulsion method for the preparation of antifungal agent-loaded microcapsules. Two types of chitosan microcapsules are successfully prepared. The mean particle size of the chitosan/miconazole nitrate microcapsules is 2.6 μm and that of the chitosan/clotrimazole microcapsules is 4.1 μm. The encapsulation efficiency of the chitosan/miconazole nitrate microcapsules (77.58–96.81%) is relatively higher than that of the chitosan/clotrimazole microcapsules (56.66–93.82%). The in vitro drug release performance of the microcapsules shows that the chitosan/miconazole nitrate microcapsules release about 49.5% of the drug while chitosan/clotrimazole microcapsules release more than 66.1% of the drug after 12 h under a pressure of 5 kg at pH 5.5, which is similar to the pH of human skin. The prepared drug-loaded microcapsules could be applied onto bandages or socks, and will continuously release antifungal drugs in a controlled manner under pressure.     

基于海藻酸钠羟基改性的MPEG原位共价修饰微胶囊及抗蛋白性能

目的:通过对海藻酸钠链段羟基位点改性制备甲氧基聚乙二醇(MPEG)原位共价修饰的海藻酸钠/壳聚糖(AC)微胶囊,在保证MPEG修饰微胶囊机械强度不受影响的基础上,有效提高表面MPEG修饰密度,实现兼具良好机械稳定性及抗蛋白性能的微胶囊制备方法。方法:利用溴化氰对海藻酸钠羟基进行活化并将末端氨基的点击化学linker(BAT)接枝在主链上进而制备MPEG原位共价修饰微囊A_(B(OH))CP_N,用球磨法表征微囊机械强度,用Ig G和Fgn为模型考察微囊表面抗蛋白吸附性能,以L929细胞在其二维模拟平板膜上的黏附情况作为衡量指标,考察MPEG修饰微胶囊表面细胞粘附情况,并最终通过体内移植考察MPEG修饰微囊的生物相容性。结果:基于海藻酸钠羟基位点的MPEG原位共价修饰微胶囊能够实现与常规条件制备的微胶囊接近的机械强度;同时与对照组相比Ig G吸附量降低87.4%,Fgn吸附量降低75.5%,实现了良好的抗蛋白吸附性能;二维模拟平板膜表面L929细胞粘附情况显著改善,细胞粘附数与对照组相比降低了76.9%;体内移植结果证明MPEG修饰微囊细胞粘附极少,微囊与纤维层分离明显。结论:基于海藻酸钠羟基位点的MPEG原位修饰能够实现兼具良好机械稳定性及抗蛋白吸附性能的微胶囊。     

Water-stable all-biodegradable microparticles in nanofibers by electrospinning of aqueous dispersions for biotechnical plant protection

Pheromone eluting oligolactide (OLA) microcapsules immobilized in electrospun biodegradable polyester nanofibers were obtained by electrospinning of aqueous dispersions of the microcapsules. OLA was prepared by conventional melt polycondensation of lactic acid. Following the protocol of the solvent displacement method, OLA was dissolved in acetone and mixed with Brij S20 and the pheromone of the European grape vine moth, Lobesia Botrana, (E,Z)-7,9-dodecadien-l-yl acetate (DA). Up to 32 wt % of this mixture could be dispersed in water with colloidal stability of several weeks without any sedimentation. Without DA as well as OLA, no stable dispersions of OLA in water were obtained. Replacement of DA by classical hydrophobes typically used for miniemulsions did not yield stable dispersions, but the addition of octyl acetate, which shows structural similarity to DA, yielded stable dispersions in water up to 10 wt %. Dispersions of OLA/DA were successfully electrospun in combination with an aqueous dispersion of a biodegradable block copolyester resulting in water-stable nanofibers containing OLA/DA microcapsules. Release of DA from microcapsules and fibers was retarded in comparison with non-encapsulated DA, as shown by model studies.     

Swelling behaviour of alginate–chitosan microcapsules prepared by external gelation or internal gelation technology

Swelling behaviour is one of the important properties for microcapsules made by hydrogels, which always affects the diffusion and release of drugs when the microcapsules are applied in drug delivery systems. In this paper, alginate–chitosan microcapsules were prepared by different technologies called external or internal gelation process respectively. With the volume swelling degree (S_w) as an index, the effect of properties of chitosan on the swelling behaviour of both microcapsules was investigated. It was demonstrated that the microcapsules with low molecular weight and high concentration of chitosan gave rise to low S_w. Considering the need of maintaining drug activity and drug loading, neutral pH and short gelation time were favorable. It was also noticed that S_w of internal gelation microcapsules was lower than that of external gelation microcapsules, which was interpreted by the structure analysis of internal or external gelation Ca–alginate beads with the aid of confocal laser scanning microscope.     

Polyelectrolyte microcapsules as the systems for delivery of biologically active substances

Based on the method of the layer-by-layer (LbL) adsorption of oppositely charged polyelectrolytes, sodium alginate (Alg) and poly-L-lysine (PLL), novel biodegradable microcapsules have been prepared for delivery of biological active substances (BAS). Porous spherical CaCO₃ microparticles were used as templates. The template cores were coated with several layers of oppositely charged polyelectrolytes forming shell on the core surface. The core-shell microparticles were converted into hollow microcapsules by means of core dissolution with EDTA. Mild conditions for microcapsules preparation allow to perform incorporation of various biomolecules maintaining their bioactivity. Biocompatibility and biodegradability of the polyelectrolytes give a possibility to use the microcapsules as the target delivery systems. Chymotrypsin entrapped into the microcapsules was used as a model enzyme. The immobilized enzyme retained about 86% of the activity compared to a native chymotrypsin. The resultant microcapsules were stable in acidic medium and could be easily decomposed by trypsin treatment in slightly alkaline medium. Chymotrypsin was shown to be active after its release from the microcapsules decomposed by the trypsin treatment. Thus, the microcapsules prepared by the LbL technique can be used for the development of new type of BAS delivery systems in humans and animals.     

Encapsulation of basic fibroblast growth factor by polyelectrolyte multilayer microcapsules and its controlled release for enhancing cell proliferation

Basic fibroblast growth factor (FGF2) is an important protein for cellular activity and highly vulnerable to environmental conditions. FGF2 protected by heparin and bovine serum albumin was loaded into the microcapsules by a coprecipitation-based layer-by-layer encapsulation method. Low cytotoxic and biodegradable polyelectrolytes dextran sulfate and poly-L-arginine were used for capsule shell assembly. The shell thickness-dependent encapsulation efficiency was measured by enzyme-linked immunosorbent assay. A maximum encapsulation efficiency of 42% could be achieved by microcapsules with a shell thickness of 14 layers. The effects of microcapsule concentration and shell thickness on cytotoxicity, FGF2 release kinetics, and L929 cell proliferation were evaluated in vitro. The advantage of using microcapsules as the carrier for FGF2 controlled release for enhancing L929 cell proliferation was analyzed.     

大肠杆菌质粒DNA提取方法的优化

目的:简化操作流程,缩短提取时间,降低试验对操作者的危害。方法:该方法去除酚、氯仿等有害试剂,采用LiCl沉淀去除质粒制备物中小片段核酸(包括DNA和RNA);工程菌生长至对数期时通过加入氯霉素后不仅方便质粒DNA的提取过程中蛋白质的去除,而且可使质粒的拷贝数进一步增加,提高质粒DNA产量的目的。结果:实验改进方法所提取的质粒DNA产量高于常规方法,达到20μg/mL。结论:改进方法提取的质粒DNA,其下游的内切酶消化,PCR、重组质粒鉴定、转化大肠杆菌等实验的结果和重复性都令人满意,完全可用于一般的分子生物学研究。     

Enhanced anti-topoisomerase II activity by mucoadhesive 4-CBS–chitosan/poly (lactic acid) nanoparticles

In this study, the biodegradable mucoadhesive 4-carboxybenzensulfonamide chitosan (4-CBS–chitosan)/poly (lactic acid) (PLA) nanoparticles were fabricated by the electrospray ionization technique for enhancing anti-topoisomerase II (Topo II) activity. The obtained (4-CBS–chitosan/PLA)-DOX nanoparticles were characterized using SEM, particle size analyzer. We emphasis on encapsulation efficiency, in vitro drug release behavior and also performed in vitro studies of Topo II inhibitory activity using gel electrophoresis. In addition, the cytotoxicity of the 4-CBS–chitosan/PLA nanoparticles using MTT assay was also studied. The mean particle size of spherical shaped (4-CBS–chitosan/PLA)-DOX is less than 300 nm. The DOX loaded 4-CBS–chitosan/PLA composite nanoparticles produced high entrapment efficiency of 85.8% and provided the prolonged release of DOX extended to 26 days and also still had strong Topo II inhibitory activity up to 77.4%. Overall, it was shown that 4-CBS–chitosan/PLA nanoparticles could be promising carriers for controlled delivery of anticancer drugs.     

Incapsulation of enzymes into polyelectrolyte nano- and microcapsules and the problem of the development of enzymatic microdiagnostics

The incapsulation of proteins into polyelectrolyte microcapsules (PE-microcapsules) has been studied with the aim to develop microdiagnostica for the presence of low-molecular-weight compounds in native biological fluids. The problem was solved using two enzymes: lactate dehydrogenase and urease. Polyelectrolyte microcapsules were prepared using two polyanions: polystyrene sulfonate (PSS) and dextran sulfate (DS), and two polycations: polyallylamine (PAA) and polydiallylmethylammonium (PDADMA). CaCO3 microspherulites with the incapsulated enzyme served as a "core" in the formation of polyelectrolyte microcapsules. It was shown that the main problem in the preparation of a polyelectrolyte microdiagnosticum is the selection of an oppositely charged pair of polyelectrolytes optimal for the active functioning of the enzyme. It follows from the results obtained that the best polyelectrolyte pairs for the formation of the envelope of a PE-microcapsule are PAA/DS and PAA/PSS for lactate dehydrogenase and PSS/PDADMA for urease. Taking into account these data, we designed enzyme-containing microcapsules with different polyelectrolyte compositions and different numbers of layers and studied their properties.     

In Vitro and In Vivo Studies on Chitosan Beads of Losartan Duolite AP143 Complex, Optimized by Using Statistical Experimental Design

The aim of the present research work was to develop release modulated beads of losartan potassium complexed with anion exchange resin, Duolite AP143 (cholestyramine). Chitosan was selected as a hydrophilic polymer for the formation of beads which could sustain the release of the drug up to 12 h, along with drug resin complex (DRC). Chitosan beads were prepared using an in-liquid curing method by ionotropic cross-linking or interpolymer linkage with sodium tripolyphosphate (TPP). The formulation of the beads was optimized for entrapment efficiency and drug release using 3² full factorial design. The independent variables selected were DRC/chitosan and percent of TPP. The optimization model was validated for its performance characteristics. Studies revealed that as the concentration of chitosan and TPP was increased, entrapment efficiency and the drug release were found to increase and decrease, respectively. The swelling capacity of chitosan–TPP beads decreased with increasing concentration of TPP. The effect of chitosan concentration and percentage of TPP solution used for cross-linking on entrapment efficiency and drug release rate was extensively investigated. Optimized beads were subjected to in vivo studies in Wistar albino rats to determine the mean arterial blood pressure and compared with marketed formulation. The pharmacodynamic study demonstrates steady blood pressure control for optimized formulation as compared to fluctuated blood pressure for the marketed formulation.     

Studies on Mefenamic Acid Microparticles: Formulation, In Vitro Release, and In Situ Studies in Rats

In this study, we investigated the in vitro characteristics of mefenamic acid (MA) microparticles as well as their effects on DNA damage. MA-loaded chitosan and alginate beads were prepared by the ionotropic gelation process. Microsponges containing MA and Eudragit RS 100 were prepared by quasi-emulsion solvent diffusion method. The microparticles were characterized in terms of particle size, surface morphology, encapsulation efficiency, and in vitro release profiles. Most of the formulation variables manifested an influence on the physical characteristics of the microparticles at varying degrees. We also studied the effects of MA, MA-loaded microparticles, and three different polymers on rat brain cortex DNA damage. Our results showed that DNA damage was higher in MA-loaded Eudragit microsponges than MA-loaded biodegradable chitosan or alginate microparticles.     

Novel chitosan derivative nanoparticles enhance the immunogenicity of a DNA vaccine encoding hepatitis B virus core antigen in mice

BACKGROUND: Chitosan has been shown to possess useful properties such as non-toxicity, high biocompatibility and non-antigenicity that offer advantages for vaccine delivery systems. In this study, we prepared novel chitosan derivative nanoparticles as DNA vaccine carriers and the potential and mechanism of the DNA-nanoparticle complexes in inducing augmented immune responses were explored. METHODS: The pVAX(HBc)DNA-nanoparticle complexes as vaccine delivery systems were studied in several aspects: the protection against DNase I degradation was measured by an in vitro inhibition assay; the sustained expression of the plasmid in vivo was determined by RT-PCR; the elevated uptake efficiency by phagocytes was observed with confocal microscopy; the biocompatibility was evaluated by cytotoxicity and histology assay; the complexes were administrated to C57BL/6 mice and the humoral and cellular immune responses were evaluated by ELISA, IFN-gamma production and cytolytic T lymphocyte (CTL)-specific lysis assay. RESULTS: The remaining relative activity of DNase I after inhibition varied from 32.3% to 77.6%. The complexes were observed with higher uptake efficiency by phagocytes than naked DNA. Three types of nanoparticles did not induce significant cytotoxicity at concentrations相似文献   

A protein delivery system: biodegradable alginate-chitosan-poly(lactic-co-glycolic acid) composite microspheres

In the present study we developed alginate-chitosan-poly(lactic-co-glycolic acid) (PLGA) composite microspheres to elevate protein entrapment efficiency and decrease its burst release. Bovine serum albumin (BSA), which used as the model protein, was entrapped into the alginate microcapsules by a modified emulsification method in an isopropyl alcohol-washed way. The rapid drug releases were sustained by chitosan coating. To obtain the desired release properties, the alginate-chitosan microcapsules were further incorporated in the PLGA to form the composite microspheres. The average diameter of the composite microcapsules was 31+/-9microm and the encapsulation efficiency was 81-87%, while that of conventional PLGA microspheres was just 61-65%. Furthermore, the burst releases at 1h of BSA entrapped in composite microspheres which containing PLGA (50:50) and PLGA (70:30) decreased to 24% and 8% in PBS, and further decreased to 5% and 2% in saline. On the contrary, the burst releases of conventional PLGA microspheres were 48% and 52% in PBS, respectively. Moreover, the release profiles could be manipulated by regulating the ratios of poly(lactic acid) to poly(glycolic acid) in the composite microspheres.     

Injectable Polysaccharide Microcapsules for Prolonged Release of Minocycline for the Treatment of Periodontitis

Injectable polysaccharide microcapsules holding minocycline were fabricated from alginate and chitosan for the treatment of periodontitis. The microcapsules were examined for the release and degradation of minocycline, as well as antimicrobial activity. The microcapsules were biodegradable and released minocycline between 10 and 1000 μg ml⁻¹, which was higher than the usual therapeutic concentration (1–5 μg ml⁻¹), for up to 7 days. These microcapsules showed a statistically significant suppression of pathogenic bacteria, such as Prevotella intermedia causing periodontitis. The microcapsules are thus potentially useful for drug delivery for the treatment of periodontitis.     

Encapsulating live cells with water-soluble chitosan in physiological conditions

A new class of microcapsules was prepared under physiological conditions by polyelectrolyte complexation between two oppositely-charged, water-soluble polymers. The microcapsules consisted of an inner core of half N-acetylated chitosan and an outer shell of methacrylic acid (MAA) (20.4%)-hydroxyethyl methacrylate (HEMA) (27.4%)-methyl methacrylate (MMA) (52.2%) (MAA-HEMA-MMA) terpolymer. Both 400 and 150 kDa half N-acetylated chitosans maintained good water solubility and supplied enough protonated amino groups to coacervate with terpolymer at pH 7.0-7.4, in contrast to other chitosan-based microcapsules which must be prepared at pH <6.5. The viscosity of half N-acetylated chitosan solutions between 80 and 3000 cPas allowed the formation of microcapsules with spherical shape. Molar mass, pH and concentration of half N-acetylated chitosan, and reaction time, influenced the morphology, thickness and porosity of the microcapsules. Microcapsules formed with high concentration of half N-acetylated chitosan exhibited improved mechanical stability, whereas microcapsules formed with low concentration of half N-acetylated chitosan exhibited good permeability. This 3D microenvironment has been configured to cultivate sensitive anchorage-dependent cells such as hepatocytes to maintain high level of functions.