The primary structure and structural characteristics of Achromobacter lyticus protease I, a lysine-specific serine protease

The complete amino acid sequence of Achromobacter lyticus protease I (EC 3.4.21.50), which specifically hydrolyzes lysyl peptide bonds, has been established. This has been achieved by sequence analysis of the reduced and S-carboxymethylated protease and of peptides obtained by enzymatic digestion with Achromobacter protease I itself and Staphylococcus aureus V8 protease and by chemical cleavage with cyanogen bromide. The protease consists of 268 residues with three disulfide bonds, which have been assigned to Cys6-Cys216, Cys12-Cys80, and Cys36-Cys58. Comparison of the amino acid sequence of Achromobacter protease and other serine proteases of bacterial and mammalian origins has revealed that Achromobacter protease I is a mammalian-type serine protease of which the catalytic triad comprises His57, Asp113, and Ser194. It has also been shown that the protease has 9- and 26-residue extensions of the peptide chain at the N and C termini, respectively, and overall sequence homology is as low as 20% with bovine trypsin. The presence of a disulfide bridge between the N-terminal extension Cys6 and Cys216 close to the putative active site in the C-terminal region is thought to be responsible for the generation of maximal proteolytic function in the pH range 8.5-10.7 and enhanced stability to denaturation.     

Amino acid sequence of nuclease S1 from Aspergillus oryzae

The amino acid sequence of nuclease S1, a nuclease which cleaves both single-stranded DNA and RNA, from Aspergillus oryzae was determined. Reduced and S-carboxymethylated or S-aminoethylated nuclease S1 was digested with Achromobacter protease I, Staphylococcus aureus V8 protease, or endoproteinase Asp-N. Peptides thus obtained were purified by reverse-phase high-performance liquid chromatography and sequenced, and the complete primary structure was established. Nuclease S1 consists of a single peptide chain of 267 amino acid residues bearing N-glycosylated Asns 92 and 228. Five half-cystine residues are present at positions 25, 72, 80, 85, and 216, and the latter four residues are implicated in the formation of disulfide bonds by analogy with those in nuclease P1. Two short stretches of sequences involving His 60 and His 125 are shown to be identical with those involving active site His 119 in bovine ribonuclease A and active-site His 134 in porcine deoxyribonuclease I, respectively.     

Molecular cloning and sequence analysis of cDNA for batroxobin, a thrombin-like snake venom enzyme

Determination of the nucleotide sequence of a cDNA for batroxobin, a thrombin-like enzyme from Bothrops atrox, moojeni venom, allowed elucidation of the complete amino acid sequence of batroxobin for the first time for a thrombin-like snake venom enzyme. The molecular weight of batroxobin is 25,503 (231 amino acids). The amino acid sequence of batroxobin exhibits significant homology with those of mammalian serine proteases (trypsin, pancreatic kallikrein, and thrombin), indicating that batroxobin is a member of the serine protease family. Based on this homology and enzymatic and chemical studies, the catalytic residues and disulfide bridges of batroxobin were deduced to be as follows: catalytic residues, His41, Asp86, and Ser178; and disulfide bridges, Cys7-Cys139, Cys26-Cys42, Cys74-Cys230, Cys118-Cys184, Cys150-Cys163, and Cys174-Cys199. The amino-terminal amino acid residue of batroxobin, valine, is preceded by 24 amino acids. This may indicate that the amino-terminal hydrophobic peptide (18 amino acids) is a prepeptide and that the hydrophilic peptide (6 amino acids), preceded by the putative prepeptide, is a propeptide.     

Amino acid sequence and crystal structure of BaP1, a metalloproteinase from Bothrops asper snake venom that exerts multiple tissue-damaging activities

BaP1 is a 22.7-kD P-I-type zinc-dependent metalloproteinase isolated from the venom of the snake Bothrops asper, a medically relevant species in Central America. This enzyme exerts multiple tissue-damaging activities, including hemorrhage, myonecrosis, dermonecrosis, blistering, and edema. BaP1 is a single chain of 202 amino acids that shows highest sequence identity with metalloproteinases isolated from the venoms of snakes of the subfamily Crotalinae. It has six Cys residues involved in three disulfide bridges (Cys 117-Cys 197, Cys 159-Cys 181, Cys 157-Cys 164). It has the consensus sequence H(142)E(143)XXH(146)XXGXXH(152), as well as the sequence C(164)I(165)M(166), which characterize the "metzincin" superfamily of metalloproteinases. The active-site cleft separates a major subdomain (residues 1-152), comprising four alpha-helices and a five-stranded beta-sheet, from the minor subdomain, which is formed by a single alpha-helix and several loops. The catalytic zinc ion is coordinated by the N(epsilon 2) nitrogen atoms of His 142, His 146, and His 152, in addition to a solvent water molecule, which in turn is bound to Glu 143. Several conserved residues contribute to the formation of the hydrophobic pocket, and Met 166 serves as a hydrophobic base for the active-site groups. Sequence and structural comparisons of hemorrhagic and nonhemorrhagic P-I metalloproteinases from snake venoms revealed differences in several regions. In particular, the loop comprising residues 153 to 176 has marked structural differences between metalloproteinases with very different hemorrhagic activities. Because this region lies in close proximity to the active-site microenvironment, it may influence the interaction of these enzymes with physiologically relevant substrates in the extracellular matrix.     

Primary structure and disulfide bridge location of arrowhead double-headed proteinase inhibitors.

Two arrowhead proteinase inhibitors (inhibitors A and B) were characterized and their primary structures were determined. Both inhibitors A and B are double-headed and multifunctional protease inhibitors. Inhibitor A inhibits an equimolar amount of trypsin and chymotrypsin simultaneously and weakly inhibits kallikrein. Inhibitor B inhibits two molecules of trypsin simultaneously and inhibits kallikrein more strongly than does inhibitor A. The amino acid sequences of inhibitors A and B were determined by sequencing the reduced and S-carboxamidomethylated proteins and their peptides produced by cyanogen bromide or proteolytic lysylendopeptidase or Staphylococcus aureus V8 protease cleavage. Inhibitors A and B consist of 150 amino acid residues with three disulfide bonds (Cys 43-Cys 89, Cys 110-Cys 119, and Cys 112-Cys 115) and share 90% sequence identity, with 13 different residues. Since the primary structures are totally different from those of all other serine protease inhibitors so far known, these inhibitors might be classified into a new protease inhibitor family.     

Amino acid sequence of chitinase from Streptomyces erythraeus

The amino acid sequence of chitinase from Streptomyces erythraeus was determined by the conventional method. The amino acid sequences of tryptic peptides of the reduced and S-carboxymethylated protein were determined. The tryptic peptides were aligned by overlapping the amino acid sequences of chymotryptic peptides, lysyl endopeptidase peptides and cyanogen bromide fragments. S. erythraeus chitinase consists of 290 amino acid residues with the molecular weight of 30,400 and has two disulfide bridges at Cys(45)-Cys(89) and Cys(265)-Cys(272). The enzyme has no significant homology with other chitinases, lysozymes, and other proteins.     

Evidence that the methylesterase of bacterial chemotaxis may be a serine hydrolase.

CheB, the methylesterase of chemotactic bacteria, catalyzes the hydrolysis of glutamyl-methyl esters in bacterial chemoreceptor proteins. The two cysteines predicted by the amino acid sequence of CheB were replaced by alanine residues. The resulting mutants, Cys207-Ala, Cys309-Ala and a double cysteine mutant Cys207-Ala/Cys309-Ala, retained methylesterase activity, indicating that sulfhydryls are not crucial for CheB mediated catalysis. A homology search revealed a conserved serine active-site region between residues 162 and 166 which is homologous to the active-site region of acetylcholine esterases, suggesting that Ser164 of CheB is the active-site nucleophile. Oligonucleotide-directed mutagenesis was used to change the serine to a cysteine. This Ser164-Cys mutant had less than 2% of the wild-type activity. Unlike the serine proteinases which utilize a 'catalytic triad' mechanism, CheB does not have the conserved histidine and aspartic acid residues located in positions N-terminal to the active-site serine. In addition, CheB is not labeled with di-isopropylfluorophosphate, a potent inhibitor of other serine hydrolases. A novel mechanism is proposed for CheB involving substrate-assisted catalysis to account for these apparent anomalies.     

Amino acid sequence of bovine angiogenin

The amino acid sequence and disulfide bridges of bovine plasma derived angiogenin were determined by sequencer analysis of the intact protein and fragments derived by enzymatic and chemical digestion. Bovine angiogenin is a single-chain protein of 125 amino acids; it contains six cysteines and has a calculated molecular weight of 14,595. In contrast to the human protein its amino terminus is unblocked. It has the following sequence: H2N-Ala1-Gln-Asp-Asp-Tyr-Arg-Tyr-Ile-His-Phe10-Leu-Thr-Gln-His-Tyr -Asp-Ala-Lys- Pro-Lys20-Gly-Arg-Asn-Asp-Glu-Tyr-Cys-Phe-Asn-Met30-Met-Lys- Asn-Arg-Arg-Leu-Thr - Arg-Pro-Cys40-Lys-Asp-Arg-Asn-Thr-Phe-Ile-His-Gly-Asn50-Lys- Asn-Asp-Ile-Lys-Ala - Ile-Cys-Glu-Asp60-Arg-Asn-Gly-Gln-Pro-Tyr-Arg-Gly-Asp-Leu70- Arg-Ile-Ser-Lys-Ser - Glu-Phe-Gln-Ile-Thr80-Ile-Cys-Lys-His-Lys-Gly-Ser-Ser-Arg90- Pro-Pro-Cys-Arg-Tyr - Gly-Ala-Thr-Glu-Asp100-Ser-Arg-Val-Ile-Val-Val-Gly-Cys-Glu-Asn1 10-Gly-Leu-Pro- Val-His-Phe-Asp-Glu-Ser-Phe120-Ile-Thr-Pro-Arg-His-OH. Disulfide bonds link Cys(27)-Cys(82), Cys(40)-Cys(93), and Cys(58)-Cys(108). Bovine angiogenin is 64% identical with human angiogenin; like the human protein, it is homologous to the pancreatic ribonucleases, with conservation of active site residues. Two regions, 6-22 and 65-75, are highly conserved between the angiogenins but are significantly different from those of the ribonucleases, suggesting a possible role in the molecules' biological activity.     

Amino acid sequence of thermostable direct hemolysin produced by Vibrio parahaemolyticus

The complete amino acid sequence of the subunit of thermostable direct hemolysin, a dimeric protein composed of identical subunits isolated from Vibrio parahaemolyticus, was determined by sequencing BrCN-peptides, their tryptic peptides, and overlaps obtained by Achromobacter protease I digestion. The subunit consists of 165 amino acid residues with the sole disulfide bond between Cys 151 and Cys 161. It is deduced that the biologically active hemolysin is formed by noncovalent association of subunits which are not linked together by disulfide bonds. The primary structure of hemolysin elucidated in the present study is essentially the same as that deduced from the nucleotide sequence of a gene encoding the protein but differs in 9 amino acid residues, suggesting the possibility of the presence of multiple genes for the thermostable direct hemolysin in Vibrio parahaemolyticus.     

Amino acid sequences of the two subunits of a phospholipase A2 inhibitor from the blood plasma of Trimeresurus flavoviridis. Sequence homologies with pulmonary surfactant apoprotein and animal lectins

Phospholipase A2 inhibitor (PLI), purified from the blood plasma of the Habu snake (Trimeresurus flavoviridis), was separated into two distinct subunits, PLI-A and PLI-B. These subunits were shown to be glycoproteins with molecular weights of around 21,000-22,000. When they were deglycosylated chemically with trifluoromethanesulfonic acid, the molecular weights were found to be 17,000. Their amino acid sequences were determined by alignment of peptides obtained by lysyl endopeptidase digestion and Staphylococcus aureus V8 protease digestion. PLI-A and PLI-B were each composed of 147 amino acid residues with one residue, Asn103, being for N-linked glycosylation, and the molecular weights of their protein portions were calculated to be 16,368 and 16,408, respectively. Each subunit contained four cysteine residues, all of which exist in disulfide linkages (Cys64-Cys141 and Cys119-Cys133). The sequences of PLI-A and PLI-B showed 89.9% homology to each other. When the sequences were compared with those of lipocortins, no significant homologies were detected. But the sequences were significantly homologous to those of COOH-terminal carbohydrate recognition portions of pulmonary surfactant apoprotein and animal lectins.     

Amino acid sequence of alcohol dehydrogenase from the thermophilic bacterium Thermoanaerobium brockii

The complete amino acid sequence of alcohol dehydrogenase of Thermoanaerobium brockii (TBAD) is presented. The S-carboxymethylated protein was cleaved at methionine residues (with cyanogen bromide) to provide a set of 10 nonoverlapping fragments accounting for 90% of the sequence. These fragments were then overlapped and aligned, and the sequence was completed by using peptides generated by proteolytic cleavage at lysine residues (with Achromobacter protease I). The protein subunit contained 352 amino acid residues corresponding to a molecular weight of 37,652. The sequence showed about 35% identity with that of the prokaryotic Alcaligenes eutrophus alcohol dehydrogenase and about 25% identity with any one of the eukaryotic alcohol/polyol dehydrogenases known today. Of these, only 18 residues (5%) are strictly conserved: 11 Gly, 2 Asp, and 1 each of Cys, His, Glu, Pro, and Val.     

cDNA cloning and expression of acutin

Acutin, a thrombin-like enzyme was purified from Agkistrodon acutus venom in three steps by DEAE-Sepharose CL-6B, Superose 12 column on FPLC and Mono-Q column chromatographies. Its first 15 N-terminal amino acid residues sequence was then determined and the acutin cDNA was isolated from venom gland total RNA using RT-PCR. Determination of its nucleotide sequence allowed elucidation of the amino acid sequence of mature peptide for the first time. The mature acutin has 233 amino acids and its amino acid sequence exhibits significant homology with those of thrombin-like enzymes from crotaline snakes venoms. Based on the homology, the catalytic residues and disulfide bridges of acutin were deduced to be as follows: catalytic residues, His41, Asp84 and Ser179; and disulfide bridges, Cys7-Cys139, Cys26-Cys42, Cys74-Cys231, Cys118-Cys185, Cys150-Cys164, Cys175-Cys200. The recombinant acutin has been expressed in E. coli and purified by affinity column. The renatured recombinant acutin is reported for the first time to have the activity of clotting fibrinogen and arginine-esterase.     

Lecithin:cholesterol acyltransferase. Functional regions and a structural model of the enzyme

The amino acid sequence of human lecithin:cholesterol acyltransferase has been determined by degradation and alignment of peptides obtained from tryptic and staphylococcal digestions and the cleavage with cyanogen bromide and consisted of 416 amino acid residues. All of the tryptic peptides of lecithin:cholesterol acyltransferase were isolated and sequenced. Peptides resulting from digestion by staphylococcal protease, cyanogen bromide cleavage, or the combination of the two methods were employed to find overlapping segments. The N terminus of human lecithin:cholesterol acyltransferase was determined to be phenylalanine by sequencing the whole protein up to 40 residues while the C terminus was identified as glutamic acid through carboxypeptidase Y cleavage. Cys50 and Cys74 and Cys313 and Cys356 were identified as the two disulfide bridges while the free sulfhydryl groups were located at positions 31 and 184. The N-glycosylated sites of the protein were assigned to asparagines at positions 20, 84, 272, and 384. The active site of lecithin:cholesterol acyltransferase was identified as serine on position 181 according to its homology with other serine-type esterases which have a common structure of glycine-variable amino acid-active serine-variable amino acid-glycine (Gly-X-Ser-X-Gly) with the variable amino acids disrupting the homology. No long internal repeats or homologies with apolipoproteins were found. The secondary structure is consistent with the results of predictive algorithms. A simple model of the enzyme is proposed on the basis of available chemical data and predictive methods.     

Assignment of the disulfide bonds of Ole e 1, a major allergen of olive tree pollen involved in fertilization.

The most prevalent allergen from olive tree pollen, Ole e 1, consists of a single polymorphic polypeptide chain of 145 amino acids which includes six cysteine residues at positions 19, 22, 43, 78, 90 and 131. By using an homogeneous form of the allergen expressed in Pichia pastoris, the array of the disulfide bridges has been elucidated. Specific proteolysis with thermolysin and reverse-phase HPLC separation of the peptides allowed the determination of the disulfide bond between Cys43 and Cys78. Another thermolytic product, which contained three peptides linked by the remaining four cysteines, was digested with Glu-specific staphylococcal V8 protease and the products isolated by reverse-phase HPLC. Amino acid compositions and Edman degradation of the peptide products indicated the presence of the disulfide bonds at Cys19-Cys90 and Cys22-Cys131. These data can help in the analysis of the three-dimensional structure of the protein as well as in studies of its allergenic determinants.     

The primary structure of cassowary (Casuarius casuarius) goose type lysozyme

The complete amino acid sequence of cassowary (Casuarius casuarius) goose type lysozyme was analyzed by direct protein sequencing of peptides obtained by cleavage with trypsin, V8 protease, chymotrypsin, lysyl endopeptidase, and cyanogen bromide. The N-terminal residue of the enzyme was deduced to be a pyroglutamate group by analysis with a LC/MS/MS system equipped with the oMALDI ionization source, and then confirmed by a glutamate aminopeptidase enzyme. The blocked N-terminal is the first reported in this enzyme group. The positions of disulfide bonds in this enzyme were chemically identified as Cys4-Cys60 and Cys18-Cys29. Cassowary lysozyme was proved to consist of 185 amino acid residues and had a molecular mass of 20408 Da calculated from the amino acid sequence. The amino acid sequence of cassowary lysozyme compared to that of reported G-type lysozymes had identities of 90%, 83%, and 81%, for ostrich, goose, and black swan lysozymes, respectively. The amino acid substitutions at PyroGlu1, Glu19, Gly40, Asp82, Thr102, Thr156, and Asn167 were newly detected in this enzyme group. The substituted amino acids that might contribute to substrate binding were found at subsite B (Asn122Ser, Phe123Met). The amino acid sequences that formed three alpha-helices and three beta-sheets were completely conserved. The disulfide bond locations and catalytic amino acid were also strictly conserved. The conservation of the three alpha-helices structures and the location of disulfide bonds were considered to be important for the formation of the hydrophobic core structure of the catalytic site and for maintaining a similar three-dimensional structure in this enzyme group.     

Purification, characterization, and primary structure of a novel cell wall hydrolytic amidase, CwhA, from Achromobacter lyticus

A novel bacteriolytic enzyme CwhA (cell wall hydrolytic amidase) was purified by ion exchange and gel-filtration chromatographies from a commercial bacteriolytic preparation from Achromobacter lyticus. CwhA exhibited optimal pH at 8.5 and lysed CHCl(3)-treated Escherichia coli more efficiently than Micrococcus luteus, Staphylococcus aureus, Enterococcus faecalis, and Pediococcus acidilactici. The enzyme was inhibited by 1,10-phenanthroline strongly and by EDTA to a lesser extent, suggesting that it is probably a metalloenzyme. Amino acid composition and mass spectrometric analyses for the CwhA-derived M. luteus muropeptides revealed that CwhA is N-acetylmuramoyl-L-alanine amidase [EC 3.5.1. 28]. The complete amino acid sequence of CwhA was established by a combination of Edman degradation and mass spectrometry for peptides obtained by Achromobacter protease I (API) digestion and cyanogen bromide (CNBr) cleavage. The enzyme consists of a single polypeptide chain of 177 amino acid residues with one disulfide bond, Cys114-Cys121. CwhA was found to be homologous to N-acetylmuramoyl-L-alanine amidase from bacteriophage T7 (BPT7). Its sequence identity with BPT7 is 35%, but the amino acid residues functioning as zinc ligands in BPT7 are absent in CwhA. These results suggest that CwhA is a new type of N-acetylmuramoyl-L-alanine amidase.     

Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1

Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194.     

Identification of the disulfide bonds in human plasma protein SP-40,40 (apolipoprotein-J).

SP-40,40, a human plasma protein, is a modulator of the membrane attack complex formation of the complement system as well as a subcomponent of high-density lipoproteins. In the present study, the positions of the disulfide bonds in SP-40,40 were determined. SP-40,40 was purified from human seminal plasma by affinity chromatography using an anti-SP-40,40 monoclonal antibody and reversed-phase, high-performance liquid chromatography (HPLC). The protein was digested with trypsin and the fragments were separated by reversed-phase HPLC. The peptides containing disulfide bonds were fluorophotometrically detected with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (ABD-F). The peptides containing more than two disulfide bonds were further digested with Staphylococcus aureus V8 protease and lysylendopeptidase, and the fragments were isolated by HPLC. The amino acid compositions and the amino acid sequences of the peptides containing only a disulfide bond were determined. Disulfide bonds thus determined were between Cys58(alpha)-Cys107(beta), Cys68(alpha)-Cys99(beta), Cys75(alpha)-Cys94(beta), and Cys86(alpha)-Cys80(beta). Since there was no free sulfhydryl groups in the SP-40,40 molecule, Cys78(alpha) and Cys91(beta) should also be linked by a disulfide bond. It is notable that all of the disulfide bonds in SP-40,40 are not only formed by inter-chain pairing, but also appear to form an antiparallel ladder-like structure between the two chains. The unique structure could be related to the functions of SP-40,40.     

The roles of surface loop insertions and disulfide bond in the stabilization of thermophilic WF146 protease

Thermophilic WF146 protease possesses four surface loop insertions and a disulfide bond, resembling its psychrophilic (subtilisins S41 and S39) and mesophilic (subtilisins SSII and sphericase) homologs. Deletion of the insertion 3 (positions 193-197) or insertion 4 (positions 210-221) of WF146 protease resulted in a significant decrease of the enzyme stability. In addition, substitution of the residues Pro211 and Ala212 or residue Glu221 which localized in the vicinity of a Ca(2+) binding site of the enzyme by the corresponding residues in subtilisin S41 remarkably reduced the half-life of the enzyme at 70 degrees C, suggesting that the three residues contributed to the thermostability of the enzyme, probably by enhancing the affinity of enzyme to Ca(2+). In the presence of dithiothreitol, the WF146 protease suffered excessive autolysis, indicating that the Cys52-Cys65 disulfide bond played a critical role in stabilizing the WF146 protease against autolysis. The autolytic cleavage sites of the WF146 protease were identified to locate between residues Asn63-Gly64 and Cys65-Ala66 by N-terminal amino acid analysis of the autolytic product. It was noticed that the effect of the autolytic cleavage at Asn63-Gly64 could be compensated by the disulfide bond Cys52-Cys65 under non-reducing condition, and the disulfide bond cross-linked autolytic product remained active. The apparent stabilization effect of the disulfide bond Cys52-Cys65 in the WF146 protease might provide a rational basis for improving the stability of subtilase against autolysis by protein engineering.     

Structure of an antifreeze polypeptide from the sea raven. Disulfide bonds and similarity to lectin-binding proteins.

The antifreeze polypeptide (AFP) from the sea raven, Hemitripterus americanus, is a member of the cystine-rich class of blood antifreeze proteins which enable survival of certain fishes at sub-zero temperatures. Sea raven AFP contains 129 residues with 10 half-cystine residues. We have analyzed these half-cystine residues and established that all 10 of the half-cystine residues appeared to be involved in disulfide bond formation and that disulfide bonds linked Cys7 to Cys18, Cys35 to Cys125, and Cys89 to Cys117. These assignments were established by extensive proteolytic digestions of native AFP using pepsin and thermolysin and purification of the peptides by Sephadex G-15 gel filtration chromatography, anion exchange chromatography, and C18 reverse-phase high performance liquid chromatography. Cystine-containing peptides were detected by a colorimetric assay using nitrothiosulfobenzoate. Disulfide-containing peptides were reduced and alkylated, purified, and analyzed by amino acid analysis. The unreduced disulfide-linked peptides were sequenced directly by automated Edman degradations to confirm the disulfide assignments. Possible arrangements of the two remaining disulfide bonds include linkages Cys69/111 to Cys100/101. The sea raven AFP shares structural similarity with pancreatic stone protein and several lectin-binding proteins, especially with respect to half-cystines, glycines, and bulky aromatic residues. Two of the disulfide linkages we determined for sea raven AFP: Cys7-Cys18 and Cys35-Cys125, are conserved in these proteins. These similarities in covalent structure suggest that the sea raven AFP, pancreatic stone protein, and several lectin-binding proteins comprise a family of proteins which may possess a common fold.