Aqueous two-phase systems extraction of alpha-toxin from Clostridium perfringens type A

Two sequential half-fraction designs were applied to studying the alpha-toxin partition produced by Clostridium perfringens type A in aqueous two phase systems (ATPS), as a function of four factors: PEG molar mass and concentration, phosphate concentration and pH. The highest purification factor, yield and partition coefficient results were obtained with PEG 8000 (15%, w/w), phosphate at 20% (w/w) and pH 8.0. This system allows, in a single step, an alpha-toxin purification of 4.6-fold with final activity yield of 230% and partition coefficient of 113.9 in the PEG rich phase.     

Purification of recombinant phenylalanine dehydrogenase by partitioning in aqueous two-phase systems

This study presents the partitioning and purification of recombinant Bacillus badius phenylalanine dehydrogenase (PheDH) in aqueous two-phase systems (ATPS) composed of polyethylene glycol 6000 (PEG-6000) and ammonium sulfate. A single-step operation of ATPS was developed for extraction and purification of recombinant PheDH from E. coli BL21 (DE3). The influence of system parameters including; PEG molecular weight and concentration, pH, (NH(4))(2)SO(4) concentration and NaCl salt addition on enzyme partitioning were investigated. The best optimal system for the partitioning and purification of PheDH was 8.5% (w/w) PEG-6000, 17.5% (w/w) (NH(4))(2)SO(4) and 13% (w/w) NaCl at pH 8.0. The partition coefficient, recovery, yield, purification factor and specific activity values were of 92.57, 141%, 95.85%, 474.3 and 10424.97 U/mg, respectively. Also the K(m) values for L-phenylalanine and NAD(+) in oxidative deamination were 0.020 and 0.13 mM, respectively. Our data suggested that this ATPS could be an economical and attractive technology for large-scale purification of recombinant PheDH.     

Application of the response surface methodology for optimization of whey protein partitioning in PEG/phosphate aqueous two-phase system

In order to develop a new strategy for β-lactoglobulin (β-lg) removal from whey protein, partitioning of α-lactalbumin (α-la), β-lg and glycomacropeptide (Gmp) was studied using aqueous two phase systems (ATPS). A system composed of 13% (w/w) polyethylene glycol (PEG, average molar mass 2000 g/mol) and 13% (w/w) potassium phosphate was used at 25°C. A central composite rotatable design (CCRD) associated to the response surface methodology (RSM) was applied to investigate the effects of NaCl concentration and pH on the partition of these proteins. It was found that α-la and Gmp partitioned to the top phase rich in PEG, whereas β-lg partitioned to the bottom phase rich in salt. According to the RSM, optimal conditions for β-lg removal where found where pH was equal to 6.7 and salt concentration was 0.35 mol/L. Under these conditions, the partition coefficient K(α) was 0.48 and K(Gmp) was 0.92. On the other hand, the partition coefficient K(β) was only 0.01. In such conditions β-lg preferentially concentrates in the bottom phase, while the top phase exclusively contains the proteins α-la and Gmp. Fractionation of the proteins from fresh whey was performed in a three stage cross-flow extraction system. The extraction yield for β-lg in the bottom phase was 97.3%, while the yields for α-la and Gmp in the top phase were 81.1% and 97.8%, respectively.     

Purification and Characterization of Polyphenol Oxidase From Waste Potato Peel by Aqueous Two-Phase Extraction

Potato peel from food industrial waste is a good source of polyphenol oxidase (PPO). This work illustrates the application of an aqueous two-phase system (ATPS) for the extraction and purification of PPO from potato peel. ATPS was composed of polyethylene glycol (PEG) and potassium phosphate buffer. Effect of different process parameters, namely, PEG, potassium phosphate buffer, NaCl concentration, and pH of the system, on partition coefficient, purification factor, and yield of PPO enzyme were evaluated. Response surface methodology (RSM) was utilized as a statistical tool for the optimization of ATPS. Optimized experimental conditions were found to be PEG1500 17.62% (w/w), potassium phosphate buffer 15.11% (w/w), and NaCl 2.08 mM at pH 7. At optimized condition, maximum partition coefficient, purification factor, and yield were found to be 3.7, 4.5, and 77.8%, respectively. After partial purification of PPO from ATPS, further purification was done by gel chromatography where its purity was increased up to 12.6-fold. The purified PPO enzyme was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), followed by K_m value 3.3 mM, and V_max value 3333 U/mL, and enzyme stable ranges for temperature and pH of PPO were determined. These results revealed that ATPS would be an attractive option for obtaining purified PPO from waste potato peel.     

Optimisation of aqueous two-phase extraction of human antibodies

The purification of human antibodies in an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) 6000 and phosphate was optimised by surface response methodology. A central composite design was used to evaluate the influence of phosphate, PEG and NaCl concentration and of the pH on the purity and extraction yield of IgG from a simulated serum medium. The conditions that maximise the partition of IgG into the upper phase were determined to be high concentrations of NaCl and PEG, low concentrations of phosphate and low pH values. An ATPS composed of 12% PEG, 10% phosphate, 15% NaCl at pH 6 was further used to purify human monoclonal antibodies from a Chinese Hamster Ovary (CHO) concentrated cell culture supernatant with a recovery yield of 88% in the upper PEG-rich phase and a purification factor of 4.3. This ATPS was also successfully used to purify antibodies from a hybridoma cell culture supernatant with a recovery yield of 90% and a purification factor of 4.1.     

AQUEOUS TWO-PHASE EXTRACTION FOR THE PURIFICATION OF ALKALINE AGARASES FROM CULTURE EXTRACTS OF Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases—molecular weight of the PEG, system pH, system temperature, and NaCl concentration—were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.     

Potential Aqueous Two‐Phase Processes for the Primary Recovery of Colored Protein from Microbial Origin

The primary recovery of c‐phycocyanin and b‐phycoerythrin from Spirulina maxima and Porphyridium cruentum, respectively, using an established extraction strategy was selected as a practical model system to study the generic application of polyethylene glycol (PEG)‐phosphate aqueous two‐phase systems (ATPS). The generic practical implementation of ATPS extraction was evaluated for the recovery of colored proteins from microbial origin. A comparison of the influence of system parameters, such as PEG molecular mass, concentration of PEG as well as salt, system pH and volume ratio, on the partition behavior of c‐phycocyanin and b‐phycoerythrin was carried out to determine under which conditions target colored protein and contaminants concentrate to opposite phases. One‐stage processes are proposed for the primary recovery of the colored proteins. PEG1450‐phosphate ATPS extraction (volume ratio (V_R) equal to 0.3, tie‐line length (TLL) of 34 % w/w and system pH 7.0) for the recovery of c‐phycocyanin from Spirulina maxima resulted in a primary recovery process that produced a protein purity of 2.1 ± 0.2 (defined as the relationship of 620 nm to 280 nm absorbance) and a product yield of 98 % [w/w]. PEG1000‐phosphate ATPS extraction (i.e., V_R = 1.0, PEG 1000, TLL 50 % w/w and system pH 7.0) was preferred for the recovery of b‐phycoerythrin from Porphyridium cruentum, which resulted in a protein purity of 2.8 ± 0.2 (defined as the relationship of 545 nm to 280 nm absorbance) and a product yield of 82 % [w/w]. The purity of c‐phycocyanin and b‐phycoerythrin from the crude extract increased 3‐ and 4‐fold, respectively, after ATPS. The results reported herein demonstrated the benefits of the practical generic application of ATPS for the primary recovery of colored proteins from microbial origin as a first step for the development of purification processes.     

Aqueous two-phase extraction for the purification of alkaline agarases from culture extracts of Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases--molecular weight of the PEG, system pH, system temperature, and NaCl concentration--were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.     

Coupling purification and in situ immobilization process of monoclonal antibodies to clenbuterol for immunosensor application

Clenbuterol (CL), which promotes the growth of muscular tissue and the reduction of body fat in pigs and cattle, has been confirmed to be a potential hazard to human health. In this study, a monoclonal antibody to clenbuterol (CL mAb) from a hybridoma culture supernatant was purified by an aqueous two-phase system (ATPS) at different polyethylene glycol (PEG) concentrations, PEG molecular weights, pH values, and NaCl concentrations. Then the CL mAb was immobilized in situ by directly adding polystyrene microspheres (PSMSs) into a PEG phase containing CL mAb. Using the immobilized antibody, an immunosensor was constructed to detect the CL residues in pork samples. The results showed that using an ATPS composed of 15% (w/w) PEG6000, 15% (w/w) phosphate, and 15% (w/w) NaCl at pH 8.0, the partition coefficient was 7.24, the activity recovery was 87.86%, and the purification fold was 2.88. The PEG–CL mAb–PSMS retained approximately 98% of its initial activity after 30-ml phosphate buffer (PBS) washings. After 30 days of storage, the CL mAb–PSMS lost nearly 75% of its activity, whereas the PEG–CL mAb–PSMS retained as much as 95% of its initial activity. Furthermore, the constructed immunosensor obtained recoveries of 90.5 to 102.6% when applied to pork samples spiked with CL.     

Response surface methodology for the extraction of wedelolactone from Eclipta alba using aqueous two-phase extraction

Abstract

Aqueous two-phase extraction of wedelolactone from Eclipta alba was studied using the polymer-salt system. The system consisted of polyethylene glycol (PEG) as a top phase (polymer) and sodium citrate as a bottom phase (salt). Process parameters such as PEG concentration, PEG molecular weight, salt concentration, and pH have been optimized using response surface methodology (RSM) with the help of central composite design (CCD). The optimized conditions for aqueous two-phase system (ATPS), in the case of one factor at a time approach, were found as PEG 6000, PEG concentration 18% (w/v), salt concentration 16% (w/v), and pH 7; with maximum extraction yield of 6.52?mg/g. While, RSM studies showed maximum extraction yield of 6.73?mg/g with the optimized parameters as PEG 6000, PEG concentration 18% (w/v), salt concentration 17.96% (w/v), and pH 7. ATPS was found to give a 1.3 fold increase in the extraction yield of wedelolactone as compared to other conventional extraction methods.     

Application of a PEG/salt aqueous two-phase partition system for the recovery of monoclonal antibodies from unclarified transgenic tobacco extract

Aqueous two-phase partition systems (ATPS) have been widely used for the separation of a large variety of biomolecules. In the present report, the application of a polyethylene glycol/phosphate (PEG/phosphate) ATPS for the separation of anti-HIV monoclonal antibodies 2G12 (mAb 2G12) and 4E10 (mAb 4E10) from unclarified transgenic tobacco crude extract was investigated. Optimal conditions that favor opposite phase partitioning of plant debris/mAb as well as high recovery and purification were found to be 13.1% w/w (PEG 1500), 12.5% w/w (phosphate) at pH 5 with a phase ratio of 1.3 and 8.25% w/w unclarified tobacco extract load. Under these conditions, mAb 2G12 and mAb 4E10 were partitioned at the bottom phosphate phase with 85 and 84% yield and 2.4- and 2.1-fold purification, respectively. The proposed ATPS was successfully integrated in an affinity-based purification protocol, using Protein A, yielding antibodies of high purity and yield. In this study, ATPS was shown to be suitable for initial protein recovery and partial purification of mAb from unclarified transgenic tobacco crude extract.     

Extractive fermentation for improved production of endoglucanase by an intergeneric fusant of Trichoderma reesei/Saccharomyces cerevisiae using aqueous two-phase system

Extractive aqueous two-phase fermentation of endoglucanase, a key enzyme for the conversion of cellulosic substances to fermentable sugars, from an intergeneric fusant of Trichoderma reesei/Saccharomyces cerevisiae is a meaningful approach for better production and simple recovery of this enzyme. A phase composition of 6.5% (w/w) dextran and 7.5% (w/w) polyethylene glycol 6000, having a partition coefficient of 2.89 and 1.31 for endoglucanase from an intergeneric fusant of T. reesei/S. cerevisiae and T. reesei (WT) (being a control in this study), respectively, was chosen for extractive fermentation of the enzyme. Endoglucanase production is higher in medium containing polyethylene glycol (PEG) 6000 than in medium without PEG 6000. Comparative analysis of endoglucanase fermentation by fusant and T. reesei was carried out in shake culture and environment-controlled bioreactor conditions. The fusant produced 0.43U of endoglucanase (overall production: 0.34U) in the top phase of an aqueous two-phase system (ATPS), compared to 0.3U in medium without the phase system in shake culture. In a batch reactor, the endoglucanase level for the fusant in the top phase of ATPS was 0.49U (overall production: 0.40U), compared to 0.38U produced in medium without aqueous two-phase components. To corroborate this study, T. reesei produced 8.41U of endoglucanase (overall production: 5.96U) in the top phase of ATPS, compared to 7.18U in the medium without the phase system in shake culture. On the other hand, in a batch bioreactor, T. reesei produced 10.13U of endoglucanase (overall production: 6.90U) in the top phase of ATPS, compared to 8.56U of the enzyme in medium without aqueous two-phase components. The lower overall enzyme production by T. reesei in the two-phase system might be due to limitation in oxygen transfer to the dispersed phase where the enzyme is produced. A higher cell concentration and a reduced lag phase was obtained in ATPS, compared to a similar medium without phase forming polymers for both the intergeneric fusant of T. reesei/S. cerevisiae and T. reesei.     

Recovery of laccase from the residual compost of Agaricus bisporus in aqueous two-phase systems

The potential use of aqueous two-phase systems (ATPS) to establish a viable protocol for the recovery of laccase from the residual compost of Agaricus bisporus was evaluated. The evaluation of system parameters such as poly (ethylene glycol) (PEG) molecular mass, concentration of PEG as well as salt and system pH was carried out to determine under which conditions the laccase concentrates predominantly to the top PEG-rich phase. PEG 1000–phosphate ATPS proved to be suitable for the primary recovery of laccase. An extraction ATPS stage comprising volume ratio equal to 1.0, PEG 1000 18.2% (w/w), phosphate 15.0% (w/w), system pH of 7.0 and loaded with 5% (w/w) of crude extract from residual compost allowed the laccase recovery. The use of ATPS resulted in one-single primary recovery stage process that produced an overall yield of 95%. The results reported here demonstrated the potential application of ATPS for the valorisation of residual material and the potential establishment of a downstream process to obtain value added products with commercial application.     

Two-step process for initial capture of plasmid DNA and partial removal of RNA using aqueous two-phase systems

In this paper, a two-step process for initial capture of plasmid DNA (pDNA) and partial removal of RNA using polyethylene glycol (PEG) and di-potassium hydrogen phosphate aqueous two-phase systems (ATPS) has been investigated. A Kühni-type ATPS extraction column was prepared with 50 ml (12% (w/w) PEG 1450, 12% (w/w) phosphate) of stationary phase and loaded with crude mobile phase (26% (w/w) PEG 1450, 4% (w/w) phosphate and 70% (w/w) lysate) at a flow rate of 6 ml min⁻¹ at an impeller speed of 200 rpm. The experiment was terminated after 100 min, and after complete resettling of the phases, 45 ml of stationary phase was harvested. During a subsequent second extraction step contained 18% (w/w) PEG 300 and 14% (w/w) phosphate, a proportion of RNA, which was also concentrated during the column process, was removed. It was demonstrated that the recovery of pDNA in the second bottom phase was 89.4%, which was similar to the initial recovery after column extraction (92.1%).     

Optimization of bovine serum albumin partition coefficient in aqueous two-phase systems

Partitioning of proteins in aqueous two-phase systems has been shown to provide a powerful method for separating and purifying mixtures of biomolecules by extraction. These systems are composed of aqueous solutions of either two water-soluble polymers, usually polyethylene glycol (PEG) and dextran (Dx), or a polymer and a salt, usually PEG and phosphate or sulfate. There are many factors which influence the partition coefficient K, the ratio of biomolecule concentration in the top phase to that in the bottom phase, in aqueous two-phase systems. The value of the partition coefficient relies on the physico-chemical properties of the target biomolecule and other molecules and their interactions with those of the chosen system. In this work, the partition behavior of pure bovine serum albumin in aqueous two-phase systems was investigated in order to see the effects of changes in phase properties on the partition coefficient K. The concentration of NaCl and pH were considered to be the factors having influence on K. Optimal conditions of these factors were obtained using the Box-Wilson experimental design. The optimum value of K was found as 0.0126 when NaCl concentration and pH were 0.14 M and 9.8, respectively, for a phase system composed of 8% (w/w) polyethylene glycol 3,350 - 9 (% w/w) dextran 37,500 - 0.05 M phosphate at 20 °C.     

The potential application of aqueous two-phase systems for in situ recovery of 6-pentyl-infinity-pyrone produced by Trichoderma harzianum

Commercial production of aroma compounds by de novo microbial biosynthesis has been principally limited by the low productivity so far achieved. Production of 6-pentyl-alpha-pyrone (6PP), a coconut-like aroma compound, by Trichoderma harzianum has been limited by the toxic effect that occurs even at low concentration (<100 ppm). This work evaluated the feasibility of the use of aqueous-two phase systems (ATPS), as in situ extraction systems, in order to overcome the toxic effects of 6PP and to improve culture productivity. The partition behaviour of 6-pentyl-alpha-pyrone and Trichoderma harzianum mycelium in polyethylene glycol (PEG)-salt and PEG-dextran two-phase systems was investigated and it is reported for the first time. The evaluation of system parameters such as PEG molecular mass, concentration of PEG as well as salt, volume ratio (Vr) and dextran molecular mass, was carried out to determine under which conditions the 6PP partitions to the opposite phase that mycelium does. PEG-dextran systems proved to be unsuitable for the in situ recovery of 6PP because either 6PP and biomass partitioned to the same phase or a large extraction phase was required for the process. ATPS extraction comprising Vr = 0.26, PEG 1450 (7.2% w/w) and sulphate (16.6% w/w) provided the best conditions for the maximum accumulation of the biomass into the bottom phase and concentrated the 6PP in the opposite phase (i.e. 86% of biomass and 56% of 6PP of the total amount loaded from the fermentation extract into the ATPS) for ex situ bioseparation. However, this system caused complete inhibition of the growth of the microorganism during the in situ bioseparation, probably as a consequence of the high ionic strength resulting from the salt concentration. Consequently, two ATPS PEG 8000-sulphate (12%/7% and 6%/14%) were evaluated and proved to be more suitable in the potential application for the in situ recovery of 6PP.     

Direct purification of Burkholderia Pseudomallei lipase from fermentation broth using aqueous two-phase systems

An aqueous two-phase purification process was employed for the recovery of Burkholderia pseudomallei lipase from fermentation broth. The partition behavior of B. pseudomallei lipase was investigated with various parameters such as phase composition, tie-line length (TLL), volume ratio (V_R), sample loading, system pH, and addition of neutral salts. Optimum conditions for the purification of lipase were obtained in polyethylene glycol (PEG) 6000-potassium phosphate system using TLL of 42.2% (w/w), with VR of 2.70, and 1% (w/w) NaCl addition at pH 7 for 20% (w/w) crude load. Based on this system, the purification factor of lipase was enhanced to 12.42 fold, with a high yield of 93%. Hence, the simplicity and effectiveness of aqueous two-phase systems (ATPS) in the purification of lipase were proven in this study.     

Technical improvement in the purification of enzymes from red algae using an aqueous two-phase partitioning system

The effective elimination of phycobiliproteins from crude enzyme preparation of the red alga Caloglossa continua (Okamura) King et Puttock (Ceramiales, Florideophyceae) was investigated in an aqueous two‐phase partitioning system (ATPS) by changing the concentrations of polyethylene glycol (PEG) and ammonium sulfate (AS). The phycobiliproteins shifted from the AS‐rich lower phase to the PEG‐rich upper phase in high PEG and AS concentrations. The best ATPS condition for the elimination of phycobiliproteins from the lower phase was obtained by the combination of 20% (weight/volume; w/v) PEG and 16% (w/v) AS. However, the recovery of aldolase and mannitol‐1‐phos‐phatase activities was significantly reduced. For purification of the enzymes, a combination of 15% (w/v) PEG and 16% (w/v) AS was the best ATPS condition, because a high specific activity and recovery of the enzymes were obtained. Under these conditions, 98% of the phycobiliproteins were removed from the lower phase. Therefore, the ATPS proved to be a very useful method as a first step in the purification of enzymes from red algae.     

Potential of Aqueous Two-Phase Systems constructed on flexible devices: Human serum albumin as proof of concept

In the present research, the potential use of flexible disposable devices, specifically blood bags, for the fractionation of biological products using Aqueous Two-Phase Systems (ATPS) polymer–salt is studied and demonstrated. Purified human serum albumin (HSA) was used as model protein. Experiments were carried out on ATPS polyethylene glycol (PEG)–potassium phosphate constructed on rigid recipients (conical tubes) and flexible devices (blood bags). The device used for ATPS construction had no significant effect on HSA partition behavior. Protein partition towards the top phase was favored on systems constructed using PEG 1000 g/mol and TLL 45% (w/w), achieving up to 85% recovery. On the other hand a recovery of 92% was achieved at the bottom phase when PEG 3350 g/mol and TLL 25% (w/w) were used. Human serum was used as a complex sample on ATPS experiments. Selective fractionation of human serum proteins on ATPS constructed on flexible devices was achieved. ATPS constructed on blood bags required short equilibrium times (< 6 min), meaning it is feasible to use this approach on mass scale. The potential use of flexible disposable devices, for the fractionation of biological products using ATPS polymer–salt was demonstrated.     

Simultaneous biosynthesis and purification of two extracellular Bacillus hydrolases in aqueous two-phase systems

Thermostable alpha-amylase with temperature optimum at 80 degrees C, molecular mass 58 kDa and pI point 6.9 was purified from a catabolite resistant Bacillus licheniformis strain. The enzyme was sensitive to inhibition by metal ions and N-bromosuccinimide. The partition behaviour of this enzyme in aqueous two-phase systems (ATPS) of the polymer-polymer-water type was investigated and some effects of type, molecular weight and concentration of phase components were studied. Up to 100% retention in the bottom phase of polyethylene glycol 10,000-20,000/dextran 200 system was reached. Best partition conditions were obtained in PEG 10,000-20,000/polyvinyl alcohol 200 systems, where the partition coefficient K increased 750 times to 7.5. Simultaneous production and purification of alpha-amylase and serine proteinase in PEG-polymer-water ATPS were examined. In the system PEG 6,000/ficoll, up to 90% of the amylase was retained in the bottom phase, whereas about 95% of the total protein (K = 22.8) and 60-75% of the proteinase were in the top phase. Similar separation of the enzymes from laboratory supernatant was obtained in system PEG/Na2SO4.