Thermal expansion of blood vessels in low cryogenic temperatures, Part II: Vitrification with VS55, DP6, and 7.05 M DMSO

As part of the ongoing effort to study the mechanical behavior of biological materials in cryopreservation processes, the current study focuses on thermal expansion during vitrification (vitreous in Latin means glassy). A new device is utilized in this study, which has been described in detail in the companion paper (Part I). The current study (Part II) focuses on measurements of vitrified blood vessels permeated with the cryoprotectants VS55, DP6, and DMSO. Data analysis in this study includes polynomial approximation of experimental results in the lower part of the cryogenic temperature range, where the material behaves as solid over a practical time scale. The study further includes a unified thermal expansion analysis throughout the entire cryogenic temperature range by compiling the current results with previously reported data. Finally, analysis of the glass transition temperature, based on thermal strain data is presented.     

Thermal expansion of vitrified blood vessels permeated with DP6 and synthetic ice modulators

This study provides thermal expansion data for blood vessels permeated with the cryoprotective cocktail DP6, when combined with selected synthetic ice modulators (SIMs): 12% polyethylene glycol 400, 6% 1,3-cyclohexanediol, and 6% 2,3-butanediol. The general classification of SIMs includes molecules that modulate ice nucleation and growth, or possess properties of stabilizing the amorphous state, by virtue of their chemical structure and at concentrations that are not explained on a purely colligative basis. The current study is part of an ongoing effort to characterize thermo-mechanical effects on structural integrity of cryopreserved materials, where thermal expansion is the driving mechanism to thermo-mechanical stress. This study focuses on the lower part of the cryogenic temperature range, where the cryoprotective agent (CPA) behaves as a solid for all practical applications. By combining results obtained in the current study with literature data on the thermal expansion in the upper part of the cryogenic temperature range, unified thermal expansion curves are presented.     

The Interaction of DMSO with Model Membranes. II. Direct Evidence of DMSO Binding to Membranes: An NMR Study

Abstract

Modern techniques in nuclear magnetic resonance (NMR) allow investigators to probe molecular interactions with greater sensitivity and speed than ever before. Exploiting the nuclear Overhauser effect (NOE), the intermolecular interactions between dimethylsulfoxide (DMSO) and lipid vesicles were investigated. The DMSO methyl proton signal varies with experimental mixing time suggesting the system behaves in a manner similar to that of a ligand weakly binding to a macromolecule.     

Thermal expansion of blood vessels in low cryogenic temperatures Part I: A new experimental device

As part of the ongoing effort to study the mechanical behavior of biological material during cryopreservation processes, the current study focuses on thermal expansion of blood vessels at low cryogenic temperatures. The current paper (Part I) describes a new experimental device for thermal expansion measurements of blood vessels in typical conditions of vitrification, which are associated with rapid cooling rates. For validation purposes, the thermal strain of frozen arteries in the absence of cryoprotectants was measured, and found to be about 10% larger than that of polycrystalline water; this observation agrees with literature data. The companion paper (Part II) reports on experimental results of cryoprotectants permeated with VS55, DP6, and 7.05 M DMSO at high cooling rates applicable to vitrification.     

Cryomacroscopy of vitrification, Part II: Experimental observations and analysis of fracture formation in vitrified VS55 and DP6

A new imaging device, termed a "cryomacroscope", was used to observe macrofractures in the cryoprotectant cocktails DP6 and VS55. Details of the design and construction of the cryomacroscope were presented in Part I of this report, which focused on describing the apparatus and observations of crystallization. Part I and the current paper (Part II) describe events that occur as 1 m? of cryoprotectant contained in a glass vial is cooled from room temperature down to cryogenic temperatures (～ -135°C). The presence of cracking, as well as patterns in their position and orientation, are found to be dependent on the cooling rate and on the specific cryoprotectant cocktail. Cracks, if present, disappear upon rewarming, although they appear to be sites for later preferential crystallization. Computations which predict temperatures and mechanical stresses are used to explain observations of cracking. In conjunction with these reports, additional photos of cryomacroscopy of vitrification, crystallization, and fracture formation are available at http://www.me.cmu.edu/faculty1/rabin/CryomacroscopyImages01.htm.     

Cryomacroscopy of vitrification, Part I: A prototype and experimental observations on the cocktails VS55 and DP6

A new imaging device, termed a "cryomacroscope", is presented in this report. This device is designed to assist in exploring thermal and mechanical effects associated with large-scale vitrification and crystallization, with the current setup aimed at the range of 50 μm to 2 cm. The cryomacroscope is not intended as a substitute for the cryomicroscope, but as a complementary tool for the cryobiologist. A combination of cryomacroscopy and cryomicroscopy is suggested as a basis for multi-scale cryobiology studies. This report presents initial results on vitrification, crystallization, and fracture formation in the cryoprotectant cocktails DP6 and VS55. These results show some inconsistency in the tendency to form crystals, based on critical cooling and rewarming rates measured by means of a differential scanning calorimetric device (DSC) in parallel studies. This research is in its early stages, and comparative studies on biological materials are currently underway. Part II of this report (the companion paper) presents results for fracture formation in the cryoprotectant and discusses the mechanical stresses which promote these fractures. In conjunction with these reports, additional photos of cryomacroscopy of vitrification, crystallization, and fracture formation are available at http://www.me.cmu.edu/faculty1/rabin/CryomacroscopyImages01.htm.     

Quantitative comparison of carcinogenicity, mutagenicity and electrophilicity of 10 direct-acting alkylating agents and of the initial O6:7-alkylguanine ratio in DNA with carcinogenic potency in rodents

The quantitative relationship between carcinogenicity in rodents and mutagenicity in Salmonella typhimurium was examined, by using 10 monofunctional alkylating agents, including N-nitrosamides, alkyl methanesulfonates, epoxides, β-propiolactone and 1,3-propane sultone. The compounds were assayed for mutagenicity in two S. typhimurium strains (TA1535 and TA100) and in plate and liquid assays. The mutagenic activity of the agents was compared with their alkylating activity towards 4-(4′-nitrobenzyl)pyridine and with their half-lives (solvolysis constants) in an aqueous medium. No correlations between these variables were found, nor was mutagenic activity correlated with estimates of carcinogenicity in rodents.

There was a positive relationship between carcinogenicity and the initial ratios of 7-: O⁶-alkylguanine formed or expected after their reaction with double-stranded DNA in vitro. The results suggest that alkylation of guanine at position O⁶ (or at other O atoms of DNA bases) may be a critical DNA-base modification that determines the overall carcinogenicity of these alkylating agents in rodents.     

An interfacial equilibria model for the electrokinetic properties of a fat emulsion. Part II: Magnesium,zinc and proton interactions with the interface

Abstract

The semi-empirical thermodynamic model reported in an earlier paper (Hall et al., 1991) is further developed to describe the zeta potential behaviour of an intravenous fat emulsion in the presence of magnesium and zinc cations. The effect of interfacial protonation is also explored. We have now established that a previously reported formation constant for the calcium interaction is actually a conditional value and together with the new data for zinc and magnesium, overall formation constants are calculated.     

Ethyl methanesulphonate mutagenesis with L5178Y mouse lymphoma cells: a comparison of ouabain, thioguanine and excess thymidine resistance.

Complete inhibition of growth of sensitive L5178Y mouse lymphoma cells in culture was obtained with 10(-3)M ouabain, 1.65 X 10(-3)M thymidine, 1.8 X 10(-4)M thioguanine and 10(-6)M cytosine arabinoside. The toxicity of methotrexate was dependent upon cell density and this compound was excluded from further study. The expression time before addition of the selective agent was important for detecting EMS induced resistant variants. Ouabain-resistant variants appeared immediately after treatment and were present over a broad time span. No excess thymidine- or thioguanine-resistant variants were seen initially; a peak in variant numbers was seen for excess thymidine resistance at 48-96 h and for thioguanine resistance at 144-192 h. Using induced mutation frequencies at optimum expression times, equal EMS treatments yielded substantially more variants resistant to thioguanine than to ouabain. It is suggested that this difference may have origin in possible constraints in the classes of mutants which are permissible in a vital function, maintenance of the Na+/K+ balance, when compared with a non-vital function, salvage purine biosynthesis. Some data are presented on the stability in culture of resistant variants. A limited number of observations were made following treatment in the peritoneal cavity of the mouse which were in broad agreement with the above results.