Phytate degradation by immobilized<Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> phytase in soybean-curd whey

Saccharomyces cerevisiae CY phytase-producing cells were immobilized in calcium alginate beads and used for the degradation of phylate. The maximum activity and immobilization yield of the immobilized phytase reached 280 mU/g-bead and 43%, respectively. The optimal pH of the immobilized cell phytase was not different from that of the free cells. However, the optimum temperature for the immobilized phytase was 50°C, which was 10°C higher than that of the free cells; pH and thermal stability were enhanced as a consequence of immobilization. Using the immobilized phytase, phytate was degraded in a stirred tank bioreactor. Phytate degradation, both in a buffer solution and in soybean-curd whey mixture, showed very similar trends. At an enzyme dosage of 93.9 mU/g-phytate, half of the phytate was degraded after 1 h of hydrolysis. The operational stability of the immobilized beads was examined with repeated batchwise operations. Based on 50% conversion of the phytate and five times of reuse of the immobilized beads, the specific degradation (g phytate/g dry cell weight) for the immobilized phytase increased 170% compared to that of the free phytase.     

Purification and Biochemical Characterization of Phytase Enzyme from <Emphasis Type="Italic">Lactobacillus coryniformis</Emphasis> (<Emphasis Type="Italic">MH121153</Emphasis>)

Phytase (myo-inositol hexaphosphate phosphohydrolase) belongs to phosphatases. It catalyzes the hydrolysis of phytate to less-phosphorylated inorganic phosphates and phytate. Phytase is used primarily for the feeding of simple hermit animals in order to increase the usability of amino acids, minerals, phosphorus and energy. In the present study, phytase isolation from the Lactobacillus coryniformis strain, isolated from Lor cheese sources, phytase purification and characterization were studied. The phytase was purified in simple three steps. The enzyme was obtained with 2.60% recovery and a specific activity of 202.25 (EU/mg protein). The molecular mass of the enzyme was determined to be 43.25 kDa with the sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) method. The optimum temperature and pH for the enzyme were found as 60 °C and 5.0 and respectively. To defined the substrate specificity of the phytase, the hydrolysis of several phosphorylated compounds by the purified enzyme was studied and sodium phytate showed high specificity. Furthermore, the effects of Ca²⁺, Ag⁺, Mg²⁺, Cu²⁺, Co²⁺, Pb²⁺, Zn²⁺ and Ni²⁺ metal ions on the enzyme were studied.     

Production of acrylamide using immobilized cells of<Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> M33

The cellsof Rhodococcus rhodochrous M33, which produce a nitrile hydratase enzyme, were immobilized in acrylamide-based polymer gels. The optimum pH and temperature for the activity of nitrile hydratase in both the free and immobilized cells were 7.4 and 45°C, respectively, yet the optinum temperature for acrylamide production by the immobilized cells was 20°C. The nitrile hydratase of the immobilized cells was more stable with acrylamide than that of the free cells. Under optimal conditions, the final acrylamide concentration reached about 400 g/L with a conversion yield of almost 100% after 8 h of reaction when using 150 g/L of immobilized cells corresponding to a 1.91 g-dry cell weight/L. The enzyme activity of the immobilized cells rapidly decreased with repeated use. However, the quality of the acrylamide produced by the immobilized cells was much better than that produced by the free cells in terms of color, salt content, turbidity, and foam formation. The quality of the aqueous acrylamide solution obtained was found to be of commercial use without further purification.     

Recombinant production of <Emphasis Type="Italic">Penicillium oxalicum</Emphasis> PJ3 phytase in <Emphasis Type="Italic">Pichia Pastoris</Emphasis>

The 1,332 bp phytase gene of Penicillium oxalicum PJ3 was inserted into the expression vector, pPICZαA and expressed in the methylotrophic yeast, Pichia pastoris as an active, extracellular phytase. The recombinant phytase reached a maximum yield of 12 U/ml of medium at 120 h of cultivation after methanol induction under shake-flask conditions. The enzyme was glycosylated, with a molecular mass of about 62.5 kDa. The Michaelis constant (K _m) and maximum reaction rate (V _max) for sodium phytate was 0.37 mM and 526.3 U/mg of protein, respectively. The optimal activity occurred at pH 4.5 and 55°C. Jaecheon Lee and Yunjaie Choi contributed equally to this work.     

A Thermostable phytase from <Emphasis Type="Italic">Neosartorya spinosa</Emphasis> BCC 41923 and its expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A phytase gene was cloned from Neosartorya spinosa BCC 41923. The gene was 1,455 bp in size, and the mature protein contained a polypeptide of 439 amino acids. The deduced amino acid sequence contains the consensus motif (RHGXRXP) which is conserved among phytases and acid phosphatases. Five possible disulfide bonds and seven potential N-glycosylation sites have been predicted. The gene was expressed in Pichia pastoris KM71 as an extracellular enzyme. The purified enzyme had specific activity of 30.95 U/mg at 37°C and 38.62 U/mg at 42°C. Molecular weight of the deglycosylated recombinant phytase, determined by SDS-PAGE, was approximately 52 kDa. The optimum pH and temperature for activity were pH 5.5 and 50°C. The residual phytase activity remained over 80% of initial activity after the enzyme was stored in pH 3.0 to 7.0 for 1 h, and at 60% of initial activity after heating at 90°C for 20 min. The enzyme exhibited broad substrate specificity, with phytic acid as the most preferred substrate. Its K _m and V _max for sodium phytate were 1.39 mM and 434.78 U/mg, respectively. The enzyme was highly resistant to most metal ions tested, including Fe²⁺, Fe³⁺, and Al³⁺. When incubated with pepsin at a pepsin/phytase ratio of 0.02 (U/U) at 37°C for 2 h, 92% of its initial activity was retained. However, the enzyme was very sensitive to trypsin, as 5% of its initial activity was recovered after treating with trypsin at a trypsin/phytase ratio of 0.01 (U/U).     

Mannose production from fructose by free and immobilized <Emphasis Type="SmallCaps">d</Emphasis>-lyxose isomerases from <Emphasis Type="Italic">Providencia stuartii</Emphasis>

A recombinant d-lyxose isomerase from Providencia stuartii was immobilized on Duolite A568 beads which gave the highest conversion of d-fructose to d-mannose among the various immobilization beads evaluated. Maximum activities of both the free and immobilized enzymes for fructose isomerization were at pH 7.5 and 45°C in the presence of 1 mM Mn²⁺. Enzyme half-lives were 14 and 30 h at 35°C and 3.4 and 5.1 h at 45°C, respectively. The immobilized enzyme in 300 g fructose/l (replaced hourly), produced 75 g mannose/l at 35°C = 25% (w/w) yield with a productivity of 75 g mannose l⁻¹ h⁻¹ after 23 cycles.     

A Novel Phytase appA from <Emphasis Type="Italic">Citrobacter amalonaticus</Emphasis> CGMCC 1696: Gene Cloning and Overexpression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A novel phytase gene appA, with upstream and downstream sequences from Citrobacter amalonaticus CGMCC 1696, was cloned by degenerate polymerase chain reaction (PCR), and thermal asymmetric interlaced (TAIL) PCR and was overexpressed in Pichia pastoris. Sequence analysis revealed one open reading frame that consisted of 1311 bp encoding a 436–amino-acid protein, which had a deduced molecular mass of 46.3 kDa. The phytase appA belongs to the histidine acid phosphatase family and exhibits the highest identity (70.1%) with C. braakii phytase. The gene was overexpressed in P. pastoris. The secretion yield of recombinant appA protein was accumulated to approximately 4.2 mg·mL⁻¹, and the enzyme activity level reached 15,000 U·mL⁻¹, which is higher than any previous reports. r-appA was glycosylated, as shown by Endo H treatment. r-appA was purified and characterized. The specific activity of r-appA for sodium phytate was 3548 U·mg⁻¹. The optimum pH and temperature for enzyme activity were 4.5 and 55°C, respectively. r-appA was highly resistant to pepsin or trypsin treatment. This enzyme could be an economic and efficient alternative to the phytases currently used in the feed industry.     

Nitrilase-catalysed conversion of acrylonitrile by free and immobilized cells of <Emphasis Type="Italic">Streptomyces</Emphasis> sp.

The biotransformation of acrylonitrile was investigated using thermophilic nitrilase produced from a new isolate Streptomyces sp. MTCC 7546 in both the free and immobilized state. Under optimal conditions, the enzyme converts nitriles to acids without the formation of amides. The whole cells of the isolate were immobilized in agar-agar and the beads so formed were evaluated for 25 cycles at 50°C. The enzyme showed a little loss of activity during reuse. Seventy-one per cent of 0.5 M acrylonitrile was converted to acid at 6 h of incubation at a very low density of immobilized cells, while 100% conversion was observed at 3 h by free cells.     

Production of feed enzymes (phytase and plant cell wall hydrolyzing enzymes) by<Emphasis Type="Italic">Mucor indicus</Emphasis> MTCC 6333: Purification and characterization of phytase

The production of phytase and associated feed enzymes (phosphatase, xylanase, CMCase, alpha-amylase and beta-glucosidase) was determined in a thermotolerant fungus Mucor indicus MTCC 6333, isolated from composting soil. Solid-substrate culturing on wheat bran and optimizing other culture conditions (C and N sources, level of N, temperature, pH, culture age, inoculum level), increased the yield of phytase from 266 +/- 0.2 to 513 +/- 0.4 nkat/g substrate dry mass. The culture extract also contained 112, 194, 171, 396, and 333 nkat/g substrate of phosphatase, xylanase, CMCase, beta-glucosidase and alpha-amylase activities, respectively. Simple 2-step purification employing anion exchange and gel filtration chromatography resulted in 21.9-fold purified phytase. The optimum pH and temperature were pH 6.0 and 70 degrees C, respectively. The phytase was thermostable under acidic conditions, showing 82% residual activity after exposure to 60 degrees C at pH 3.0 and 5.0 for 2 h, and displayed broad substrate specificity. The Km was 200 nmol/L and v(lim) of 113 nmol/s per mg protein with dodecasodium phytate as substrate. In vitro feed trial with feed enzyme resulted in the release of 1.68 g inorganic P/kg of feed after 6 h of incubation at 37 degrees C.     

Production and characterization of thermostable alkaline phytase from <Emphasis Type="Italic">Bacillus laevolacticus</Emphasis> isolated from rhizosphere soil

A novel phytase producing thermophilic strain of Bacillus laevolacticus insensitive to inorganic phosphate was isolated from the rhizosphere soil of leguminous plant methi (Medicago falacata). The culture conditions for production of phytase by B. laevolacticus under shake flask culture were optimized to obtain high levels of phytase (2.957 ± 0.002 U/ml). The partially purified phytase from B. laevolacticus strain was optimally active at 70 °C and between pH 7.0 and pH 8.0. The enzyme exhibited thermostability with ∼80% activity at 70 °C and pH 8.0 for up to 3 h in the presence/absence of 5 mM CaCl₂. The phytase from B. laevolacticus showed high specificity for phytate salts of Ca⁺ > Na⁺. The enzyme showed an apparent K _m 0.526 mM and V _max 12.3 μmole/min/mg of activity against sodium phytate.     

Complete hydrolysis of <Emphasis Type="Italic">myo</Emphasis>-inositol hexakisphosphate by a novel phytase from <Emphasis Type="Italic">Debaryomyces castellii</Emphasis> CBS 2923

Debaryomyces castellii phytase was purified to homogeneity in a single step by hydrophobic interaction chromatography. Its molecular mass is 74 kDa with 28.8% glycosylation. Its activity was optimal at 60°C and pH 4.0. The K _m value for sodium phytate was 0.532 mM. The enzyme exhibited a low specificity and hydrolyzed many phosphate esters. The phytase fully hydrolyzed myo-inositol hexakisphosphate (or phytic acid, Ins P₆) to inositol and inorganic phosphate. The sequence of Ins P₆ hydrolysis was determined by combining results from high-performance ionic chromatography and nuclear magnetic resonance. D. castellii phytase is a 3-phytase that sequentially releases phosphate groups through Ins (1,2,4,5,6) P₅, Ins (1,2,5,6) P₄, Ins (1,2,6) P₃, Ins (1,2) P₂, Ins (1 or 2) P₁, and inositol (notation 3/4/5/6/1 or 2).     

Characteristics of fungal phytases from<Emphasis Type="Italic"> Aspergillus fumigatus</Emphasis> and<Emphasis Type="Italic"> Sartorya fumigata</Emphasis>

Aspergillus fumigatus phytase has previously been identified as a phytase with a series of favourable properties that may be relevant in animal and human nutrition, both for maximising phytic acid degradation and for increasing mineral and amino acid availability. To study the natural variability in amino acid sequence and its impact on the catalytic properties of the enzyme, we cloned and overexpressed the phytase genes and proteins from six new purported A. fumigatus isolates. Five of these phytases displayed 2 amino acid substitutions and had virtually identical stability and catalytic properties when compared with the previously described A. fumigatus ATCC 13073 phytase. In contrast, the phytase from isolate ATCC 32239 (Sartorya fumigata, the anamorph of which was identified as A. fumigatus) was more divergent (only 86% amino acid sequence identity), had a higher specific activity with phytic acid, and displayed distinct differences in substrate specificity and pH-activity profile. Finally, comparative experiments confirmed the favourable stability and catalytic properties of A. fumigatus phytase.Some of the data presented here, in particular the amino acid sequences of the phytases from different A. fumigatus and S. fumigata isolates, were first presented at the workshop on "The biochemistry of plant phytate and phytases", Copenhagen, Denmark, 25–28 October 1997     

Enzymatic synthesis of <Emphasis Type="Italic">S</Emphasis>-adenosylhomocysteine: immobilization of recombinant <Emphasis Type="Italic">S</Emphasis>-adenosylhomocysteine hydrolase from <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> (ATCC 13032)

Recombinant S-adenosylhomocysteine hydrolase from Corynebacterium glutamicum (CgSAHase) was covalently bound to Eupergit® C. The maximum yield of bound protein was 91% and the catalytic efficiency was 96.9%. When the kinetic results for the immobilized enzyme were compared with those for the soluble enzyme, no decrease in the catalytic efficiency of the former was detected. Both soluble and immobilized enzymes showed similar optimum pH and temperature ranges. The reuse of immobilized CgSAHase caused a loss of synthetic activity due to NAD⁺ release, although the binding to the support was sufficiently strong for up to 5 cycles with 95% conversion efficiency. The immobilized enzyme was incubated every 3 cycles with 100 μM NAD⁺ to recover the loss of activity after 5 cycles. This maintained the activity for another 50 cycles. The purification of S-adenosylhomocysteine (SAH) provided an overall yield of 76% and 98% purity as determined by HPLC and NMR analyses. The results indicate the suitability of immobilized CgSAHase for synthesizing SAH and other important S-nucleosidylhomocysteine.     

Cellulase production by free and immobilized <Emphasis Type="Italic">Aspergillus terreus</Emphasis>

Aspergillus terreus, isolated from rotting bagasse, showed comparable cellulolytic activities when grown either in the free or immobilized states with cellulose as the sole carbon source. The cultural and nutritional requirements for maximum cellulase production by the organism either in the free or immobilized states were similar, except an increase in the temperature optimum from 30 to 40°C, occurred upon immobilization. In the free state, the maximum filter paper hydrolase, carboxymethylcellulase and β-glucosidase activities produced were 2.1, 13.6, and 3.2 U/ml, respectively, while in the immobilized state, the levels were 1.8, 12.0, and 2.4 U/ml. Production of cellulolytic enzymes by immobilized cells was influenced by the surface area of the support material. In addition, cells in the immobilized state sustained enzyme production for a much longer period with a 4.5-fold increase in productivity during repeated batch when compared to free cells.     

Semicontinuous production of red pigment by immobilized cells of<Emphasis Type="Italic">Bacillus</Emphasis> sp. BH-99 using column bioreactor

The semicontinuous production of red pigment by immobilized cells ofBacillus sp. BH-99 was investigated in comparison with free cells. The red pigment produced highest productivity under the conditions of aeration of 0.2 mL/min and 2 mm diameter of gel beads by using 3.0% sodium alginate. Semicontinuous production by immobilized cells showed the highest productivity with replacement of fresh production medium in every 72 h for fourth fermentation cycle following the conditions of red pigment productivity.     

Purification and Properties of a Phytate-degrading Enzyme from <Emphasis Type="Italic">Pantoea agglomerans</Emphasis>

A periplasmatic phytate-degrading enzyme from Pantoea agglomerans isolated from soil was purified about 470-fold to apparent homogeneity with a recovery of 16% referred to the phytate-degrading activity in the crude extract. It behaved as a monomeric protein with a molecular mass of about 42 kDa. The purified enzyme exhibited a single pH optimum at 4.5. Optimum temperature for the degradation of phytate was 60°C. The kinetic parameters for the hydrolysis of sodium phytate were determined to be K_M = 0.34 mmol/l and k_cat = 21 s^-1 at pH 4.5 and 37°C. The enzyme exhibited a narrow substrate selectivity. Only phytate and glucose-1-phosphate were identified as good substrates. Since this Pantoea enzyme has a strong preference for glucose-1-phosphate over phytate, under physiological conditions glucose-1-phosphate is its most likely substrate. The maximum amount of phosphate released from phytate by the purified enzyme suggests myo-inositol pentakisphosphate as the final product of enzymatic phytate degradation.     

Purification and Characterization of a Phytase from <Emphasis Type="Italic">Pseudomonas syringae</Emphasis> MOK1

A phytase (EC 3.1.3.8) from Pseudomonas syringae MOK1 was purified to apparent homogeneity in two steps employing cation and an anion exchange chromatography. The molecular weight of the purified enzyme was estimated to be 45 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. The optimal activity occurred at pH 5.5 and 40°C. The Michaelis constant (K _m ) and maximum reaction rate (V_max) for sodium phytate were 0.38 mM and 769 U/mg of protein, respectively. The enzyme was strongly inhibited by Cu²⁺, Cd²⁺, Mn²⁺, and ethylenediaminetetraacetic acid (EDTA). It showed a high substrate specificity for sodium phytate with little or no activity on other phosphate conjugates. The enzyme efficiently released orthophosphate from wheat bran and soybean meal.Received: 9 September 2002 / Accepted: 6 December 2002     

Production of high fructose syrup from <Emphasis Type="Italic">Asparagus</Emphasis> inulin using immobilized exoinulinase from <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> YS-1

Extracellular exoinulinase from Kluyveromyces marxianus YS-1, which hydrolyzes inulin into fructose, was immobilized on Duolite A568 after partial purification by ethanol precipitation and gel exclusion chromatography on Sephadex G-100. Optimum temperature of immobilized enzyme was 55 °C, which was 5 °C higher than the free enzyme and optimal pH was 5.5. Immobilized biocatalyst retained more than 90% of its original activity after incubation at 60 °C for 3 h, whereas in free form its activity was reduced to 10% under same conditions, showing a significant improvement in the thermal stability of the biocatalyst after immobilization. Apparent K _m values for inulin, raffinose and sucrose were found to be 3.75, 28.5 and 30.7 mM, respectively. Activation energy (E _a) of the immobilized biocatalyst was found to be 46.8 kJ/mol. Metal ions like Co²⁺ and Mn²⁺ enhanced the activity, whereas Hg²⁺ and Ag²⁺ were found to be potent inhibitors even at lower concentrations of 1 mM. Immobilized biocatalyst was effectively used in batch preparation of high fructose syrup from Asparagus racemosus raw inulin and pure inulin, which yielded 39.2 and 40.2 g/L of fructose in 4 h; it was 85.5 and 92.6% of total reducing sugars produced, respectively.     

Characterization and large-scale production of recombinant <Emphasis Type="Italic">Streptoverticillium platensis</Emphasis> transglutaminase

Recombinant Streptomyces platensis transglutaminase (MtgA) produced by the Streptomyces lividans transformant 25-2 was purified by ammonium sulfate fractionation, followed by CM-Sepharose CL-6B fast flow, and blue-Sepharose fast flow chromatography. The purification factor was ~33.2-fold, and the yield was 65%. The molecular weight of the purified recombinant MtgA was 40.0 KDa as estimated by SDS-PAGE. The optimal pH and the temperature for the enzyme activity were 6.0 and 55 degrees C, respectively, and the enzyme was stable at pH 5.0-6.0 and at temperature 45-55 degrees C. Enzyme activity was not affected by Ca(2+), Li(+), Mn(2+), Na(+), Fe(3+), K(+), Mg(2+), Al(3+), Ba(2+), Co(2+), EDTA, or IAA but was inhibited by Fe(2+), Pb(2+), Zn(2+), Cu(2+), Hg(2+), PCMB, NEM, and PMSF. Optimization of the fermentation medium resulted in a twofold increase of recombinant MtgA activity in both flasks (5.78 U/ml) and 5-l fermenters (5.39 U/ml). Large-scale productions of the recombinant MtgA in a 30-l air-lift fermenter and a 250-l stirred-tank fermenter were fulfilled with maximal activities of 5.36 and 2.54 U/ml, respectively.