Synthesis of highly luminescent mercaptosuccinic acid‐coated CdSe nanocrystals under atmospheric conditions

Here we report a facile one‐pot method for the preparation of high‐quality CdSe nanocrystals (NCs) in aqueous solution under an air atmosphere. Compared with the traditional use of NaHSe or H₂Se, the more stable sodium selenite is utilized as the Se source for preparing highly luminescent CdSe nanocrystals. By using mercaptosuccinic acid (MSA) as the capping agent and borate–citrate acid as the buffering solution, CdSe nanocrystals with high quantum yield (up to 70%) have been synthesized conveniently. The influence of different experimental parameters, such as the pH of the precursor solution, the molar ratio of Cd²⁺ to Na₂SeO₃ and Cd²⁺ to MSA on the CdSe nanocrystals, has been systematically investigated. The prepared CdSe NCs were spherical with a size of ~ 5 nm. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of highly luminescent and biocompatible CdTe/CdS/ZnS quantum dots using microwave irradiation: a comparative study of different ligands

We compared the effects of several ligands frequently used in aqueous synthesis, including L‐cysteine, L‐cysteine hydrochloride, N‐acetyl‐L‐cysteine (NAC), glutathione and 3‐mercaptopropionic acid, for microwave synthesis of CdTe quantum dots (QDs) in a sealed vessel with varied temperatures and times, and then developed a rapid microwave‐assisted protocol for preparing highly luminescent, photostable and biocompatible CdTe/CdS/ZnS core–multishell QDs. The effects of molecular structures of these ligands on QD synthesis under high temperatures were explored. Among these ligands, NAC was found to be the optimal ligand in terms of the optical properties of resultant QDs and reaction conditions. The emission wavelength of NAC‐capped CdTe QDs could reach 700 nm in 5 min by controlling the reaction temperature, and the resultant CdTe/CdS/ZnS core–multishell QDs could achieve the highest quantum yields up to 74% with robust photostability. In addition, the effects of temperature, growth time and shell–precursor ratio on shell growth were examined. Finally, cell culturing indicated the low cytotoxicity of CdTe/CdS/ZnS core–multishell QDs as compared to CdTe and CdTe/CdS QDs, suggesting their high potential for applications in biomedical imaging and diagnostics. Copyright © 2014 John Wiley & Sons, Ltd.     

Aqueous synthesis of highly luminescent surface Mn2+‐doped CdTe quantum dots as a potential multimodal agent

Mn²⁺‐doped CdTe quantum dots (QDs) were synthesized directly via a facile surface doping strategy in aqueous solution. The best optical property emerged when the added amount of Mn²⁺ was 5% compared to Cd²⁺ in the CdTe nanoparticles and the reaction temperature was 60 °C. The fluorescence and magnetic properties of the QDs were studied. The as‐prepared Mn²⁺‐doped CdTe QDs have high quantum yield (48.13%) and a narrow distribution with an average diameter of 3.7 nm. The utility of biological imaging was also studied. Depending on the high quantum yield, cells in culture were illuminated and made more distinct from each other compared to results obtained with normal QDs. They also have a prominent longitudinal relaxivity value (r₁ = 4.2 mM^?1s^?1), which could indicate that the Mn²⁺‐doped CdTe QDs can be used as a potential multimodal agent for fluorescence and magnetic resonance imaging. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of the grafting on the fluorescence properties of CdTe nanocrystals

In this paper, we systematically investigated the influence of graft reagents having an amino or a carboxyl terminus with different chain lengths on the fluorescence properties of water‐soluble thioglycolic acid‐stabilized CdTe nanocrystals (TGA–CdTe). Strong enhancement effects of the grafting on the fluorescence intensity of TGA–CdTe were observed. The experiment results demonstrated that short‐chain‐length grafting can increase the fluorescence intensity of CdTe nanocrystals (NCs) better than long‐chain‐length grafting, and the grafting did not influence the emission wavelength of the CdTe NCs. The fluorescence intensity of the carboxyl‐grafted TGA–CdTe was more stable than that of the amino‐grafted TGA–CdTe at wide pH ranges (pH 5.1–10.0). Copyright © 2009 John Wiley & Sons, Ltd.     

The chromophore of pholasin: A highly luminescent protein

Pholasin is the photoprotein extracted from the marine bivalve Pholas dactylus. It undergoes an oxidative chemiluminescent reaction to oxypholasin with superoxide anion, hypochlorite, peroxidases and other oxidants. Since the observed absorbance and chemiluminescent emission spectra of pholasin solutions cannot be brought about solely by the amino acids composing the protein, there has to be a chemiluminescent chromophore. However, little is known about the chemical nature of this molecule. This work seeks to identify the chemical structure of the luminescent prosthetic group of pholasin. Pholasin could not be reactivated using chromophores from the hydroid Obelia geniculata (coelenterazine) and from the ostracod shrimp Vargula (formerly Cypridina) hilgendorfi. Furthermore, the reaction product of the Vargula chromophore could not be detected in solutions containing oxypholasin. Fluorescence analysis of such a solution revealed a compound with an emission spectrum (γ_max 480 nm; excitation at 320 nm), resembling the emission spectrum of the chemiluminescent reaction. This fluorescent substance was separated by gel filtration. It exhibited an apparent molecular mass of < 2000. Fluorescence masurements of extracts of partially purified pholasin suggested that a flavin moiety may be involved in pholasin luminescence.     

Synthesis and luminescent properties of gadolinium aluminates phosphors

In this work, aluminum-gadolinium oxides with different phases were prepared by the non-hydrolytic sol-gel route, using lower temperatures than those employed in methods such as solid-state reaction and Pechini method. The influence of heating treatment on sample structure was investigated. The formation process and the local structure of the samples are discussed on the basis of thermal, X-ray diffraction, photoluminescence (PL) spectroscopy, and infrared spectroscopy analyses. The quantum efficiency of Eu³⁺ in the different phases obtained in this studied was evaluated. Initial crystallization and the GdAlO₃ phase were observed at temperatures around 400 °C. PL data of all the samples revealed the characteristic transition bands arising from the ⁵D₀ → ⁵F_J (J = 0, 1, 2, 3, and 4) manifolds under maximum excitation at 275, 393, and 467 nm in all cases. The ⁵D₀ → ⁷F₂ transition often dominates the emission spectra, indicating that the Eu³⁺ ion occupies a site without inversion center.     

Synthesis,characterization and optical studies of highly luminescent ZnS nanoparticles associated with hypromellose matrix as a green and novel stabilizer

ZnS nanoparticles stabilized by a carbohydrate‐based matrix, hypromellose (hydroxypropyl methylcellulose) were prepared via a wet chemical method. The nanocomposite was characterized by X‐ray diffraction, transmission electon microscopy and Fourier transform infrared spectroscopy. X‐Ray diffraction patterns revealed a zinc blende structure. Thermogravimetric analysis suggested that polymer attached to the surface decomposes at 700 °C. Absorption measurements were carried out and calculation of the diameter polydispersity index (DPI) suggests the formation of monodisperse nanoparticles. The optical properties of the as‐prepared samples were studied by UV/vis spectroscopy and steady‐state photoluminescence (PL) spectroscopy. The PL studies indicate the applicability of these nanoparticles as biocompatible sensors or luminescence markers in future. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of reserve polyhydroxyalkanoates by luminescent bacteria

The ability of marine luminescent bacteria to synthesize polyesters of hydroxycarboxylic acids (polyhydroxyalkanoates, PHA) as reserve macromolecules was studied. Twenty strains from the collection of the luminescent bacteria CCIBSO (WDCM839) of the Institute of Biophysics, Siberian Branch, Russian Academy of Sciences, assigned to different taxa (Photobacterium leiognathi, Ph. phosphoreum, Vibrio harveyi, and V. fischeri) were analyzed. The most productive strains were identified, and the conditions ensuring high polymer yields in batch culture (40–70% of the cell dry mass weight) were determined. The capacity for synthesizing two-and three-component polymers containing hydroxybutyric acid as the main monomer and hydroxyvaleric and hydroxyhexanoic acids was revealed in Ph. leiognathi and V. harveyi strains. The results allow luminescent microorganisms to be regarded as new producers of multicomponent polyhydroxyalkanoates.     

Highly luminescent hybrid SiO2‐coated CdTe quantum dots: synthesis and properties

Novel hybrid SiO₂‐coated CdTe quantum dots (QDs) were created using CdTe QDs coated with a hybrid SiO₂ shell containing Cd²⁺ ions and a sulfur source via a sol–gel process in aqueous solution. Aqueous CdTe QDs with tunable emitting color created through a reaction between cadmium chloride and sodium hydrogen telluride was used as cores for the preparation of hybrid SiO₂‐coated CdTe QDs. In our experiments we found that the surface state of the cores and preparation conditions that affect the formation of the hybrid SiO₂ shell also greatly affect photoluminescence of the hybrid SiO₂‐coated CdTe QDs. The generation of CdS‐like clusters in the vicinity of the CdTe QDs, caused the quantum size effect of the QDs to be greatly reduced, which changes photoluminescence properties of the hybrid QDs fundamentally. Namely, the novel hybrid SiO₂ shell played an important role in generating a series of specific optical properties. In addition, the novel hybrid SiO₂ shell can be created if no CdTe QD is added. In order to gain an insight into the inter structure of the hybrid shell, we characterized the hybrid SiO₂‐coated CdTe QDs using X‐ray diffraction analysis and discuss the formation mechanism of such a hybrid structure. This work is significant because the novel hybrid SiO₂‐coated CdTe QDs with its excellent properties can be used in many applications, such as biolabeling and optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Highly luminescent and stable CsPbBr3 perovskite nanocrystals coated with polyethersulfone for white light-emitting diode applications

Simultaneously improving the stability and photoluminescence quantum yield (PLQY) of all inorganic perovskite nanocrystals (NCs) is crucial for their practical utilization in various optoelectronic devices. Here, CsPbBr₃ NCs coated with polyethersulfone (PES) were prepared via an in-situ co-precipitation method. The sulfone groups in PES bind to undercoordinated lead ion (Pb²⁺) on the CsPbBr₃ NCs, resulting in significant reduction of surface defects, thus enhancing the PLQY from 74.2% to 88.3%. Meanwhile, the PES-coated NCs exhibit high water resistance and excellent heat and light stability, maintaining over 85% of the initial PL intensity under thermal aging (70°C, 4 h) and continuous 365 nm ultraviolet (UV) light irradiation (24 W, 8 h) conditions. By contrast, the PL intensity of the control NCs dramatically dropped to less than 40%. Finally, a diode emitting bright white light was fabricated utilizing the PES-coated CsPbBr₃ NCs, which exhibits a color gamut of ~110% NTSC standard.     

Synthesis, preliminary characterization, and application of novel surfactants from highly branched xyloglucan oligosaccharides

A novel class of nonionic, carbohydrate-based surfactants has been synthesized from the plant polysaccharide xyloglucan. Enzymatic hydrolysis of xyloglucan yielded a series of well-defined, highly branched oligosaccharides that, following reductive amination, were readily conjugated with fatty acids bearing C8 to C18 chains under mild conditions. The critical micelle concentration, determined by tensiometry and dye-inclusion measurements, showed a typical dependence on acyl chain length and was sensitive to the degree of galactosylation of the head group. Several compounds from this new group of surfactants, especially those with C14 and C16 chains, were useful for the extraction of membrane-bound enzyme markers from different plant cell compartments in catalytically active form.     

Synthesis and photophysical studies of CdTe quantum dot-monosubstituted zinc phthalocyanine conjugates

The linkage of unsymmetrically monosubstituted 4-aminophenoxy zinc phthalocyanine (ZnAPPc, 5) to CdTe quantum dots capped with mercaptopropionic acid (MPA), l-cysteine (l-cys) or thioglycolic acid (TGA) has been achieved using the coupling agents ethyl-N(3-dimethylaminopropyl) carbodiimide and N-hydroxy succinimide, which facilitate formation of an amide bond to form the QD-ZnAPPc-linked conjugate. The formation of the amide bond was confirmed using Raman and IR spectroscopies. Atomic force microscopy (AFM) and UV-Vis spectroscopy were used further to characterise the conjugate. Förster resonance energy transfer (FRET) resulted in stimulated emission of ZnAPPc in both the linked (QD-ZnAPPc-linked) and mixed (QD:ZnAPPc-mixed) conjugates. The linked l-cys and TGA QDs conjugates (QD-ZnAPPc-linked) gave the largest FRET efficiencies hence showing the advantages of covalent linking. Fluorescence quantum yields of QDs were decreased in QD:ZnAPPc-mixed and QD:ZnAPPc-linked.     

Preparation of highly luminescent mannose-gold nanodots for detection and inhibition of growth of Escherichia coli

In this paper, we describe a novel, simple, and convenient method for preparing water-soluble biofunctional gold nanodots (Au NDs) for the sensitive and selective detection of Escherichia coli (E. coli) and the inhibition of its growth. We obtained luminescent mannose-capped Au NDs (Man-Au NDs) from as-prepared 2.9-nm Au nanoparticles (Au NPs) and 29,29'-dithio bis(3',6',9',12',15',18'-hexaoxa-nonacosyl α-D-mannopyranoside) (Man-RSSR-Man). To obtain improved quantum yield (>20%), luminescent Man-Au NDs (1.8 nm) were prepared from Au NPs (0.47 μM) and Man-RSSR-Man (2.5 mM) in the presence of sodium borohydride (NaBH(4); 1.0 mM). The highly luminescent properties of Man-Au NDs prepared by the NaBH(4)-assisted method were characterized by UV-vis absorption, photoluminescence, and X-ray photoelectron spectroscopies. The results supported the high-density coverage of the NDs surface by Man-RS ligands. Multivalent interactions between Man-Au NDs and FimH proteins located on the bacterial pili of E. coli resulted in the formation of aggregated cell clusters. After concentrating this agglutinative E. coli from a large-volume cell solution (5 mL), Man-Au NDs were displaced by mannose (100 mM) and stabilized by Man-RSSR-Man (5 mM). Monitoring the luminescence of Man-Au NDs allowed the detection of E. coli at levels as low as 150 CFU/mL. Man-Au NDs were also found to be efficient antibacterial agents, selectively inhibiting the growth of E. coli through Man-Au ND-induced agglutination. Our small-diameter Man-Au NDs, which provided an ultra high ligand density (local concentration) of mannose units for multivalent interactions with E. coli, have great potential for use as an antibacterial agent in other applications.     

Synthesis, structures and luminescent behaviour of tridentate salicylaldiminato-type borate complexes

Treatment of the ligands 3,5-tBu₂-2-(OH)C₆H₂CHNR [R = 2-(CO₂H)C₆H₄ (1a) and 2-(CO₂H)C₁₀H₆ (1b)] with trimethylborate, B(OMe)₃, in toluene yields, after work-up, the yellow crystalline complexes {[3,5-tBu₂-2-(O)C₆H₂CHNR]B(OMe)} [R = 2-(CO₂)C₆H₄ (2a) and 2-(CO₂)C₁₀H₆ (2b)], respectively. Further treatment of these complexes with trifluoromethanesulfonic (triflic) acid, CF₃SO₃H, followed by recrystallisation from tetrahydrofuran (thf) afforded the triflate salts [{3,5-tBu₂-2-(O)C₆H₂CHNR}B(thf)][CF₃SO₃] [R = 2-(CO₂)C₆H₄ (3a) and 2-(CO₂)C₁₀H₆ (3b)]. An electroluminescent device was constructed using 2a, which produced orange-green light with broad emission spectra (maximum brightness of 5 cd/m² being observed at 13 V). Compounds 1a and 2b·2MeCN have been characterised by single crystal X-ray structure determinations.     

Accumulation of liposome with Sialyl Lewis X to inflammation and tumor region: application to in vivo bio-imaging

We prepared the liposome binding Sialyl Lewis X (SLX) on the surface in order to specifically and efficiently deliver substances (fluorescent materials, chemical substances, proteins, genes, etc.) to inflammation or tumor regions. The liposome with SLX (SLX-Lipo-Cy5.5), in which fluorescent substance Cy5.5 was included, was administered intravenously to arthritis or Ehrlich Ascites Tumor (EAT) bearing mouse, and the accumulation of liposome was observed using two types of in vivo fluorescent imaging equipment. The result was that the accumulation of SLX-Lipo-Cy5.5 to inflammation or tumor regions was significantly higher than the control liposome without sugar chain (Lipo-Cy5.5) at 24 and 48 h after administration. In addition, it was confirmed that this accumulation showed a shift of liposome from blood vessels to the surrounding tissues. Thus, it was proven that this liposome is useful not only as an in vivo bio-imaging reagent but also as a drug delivery system (DDS).     

NK sensitivity of neuroblastoma cells determined by a highly sensitive coupled luminescent method

The measurement of natural killer (NK) cells toxicity against tumor or virus-infected cells especially in cases with small blood samples requires highly sensitive methods. Here, a coupled luminescent method (CLM) based on glyceraldehyde-3-phosphate dehydrogenase release from injured target cells was used to evaluate the cytotoxicity of interleukin-2 activated NK cells against neuroblastoma cell lines. In contrast to most other methods, CLM does not require the pretreatment of target cells with labeling substances which could be toxic or radioactive. The effective killing of tumor cells was achieved by low effector/target ratios ranging from 0.5:1 to 4:1. CLM provides highly sensitive, safe, and fast procedure for measurement of NK cell activity with small blood samples such as those obtained from pediatric patients.     

Biofabrication of ZnS:Mn luminescent nanocrystals using histidine,hexahistidine, and His-tagged proteins: A comparison study

The ubiquitous hexahistidine purification tag has been used to conjugate proteins to the shell of CdSe:ZnS quantum dots (QDs) due to its affinity for surface-exposed Zn²⁺ ions but little attention has been paid to the potential of His-tagged proteins for mineralizing luminescent ZnS nanocrystals. Here, we compare the ability of free histidine, a His tag peptide, His-tagged thioredoxin (TrxA, a monomeric protein), and N- and C-terminally His-tagged versions of Hsp31 (a homodimeric protein) to support the synthesis of Mn-doped ZnS nanocrystals from aqueous precursors under mild conditions of pH (8.2) and temperature (37 °C). We find that: (1) it is possible to produce poor quality QDs when histidine is used at high (8 mM) concentration; (2) an increase in local histidine concentration through repetition of the amino acid as a His tag decreases the amount of needed reagent ≈10-fold and improves optical properties; (3) fusion of the same His tag to TrxA allows for ZnS:Mn QDs mineralization at micromolar concentrations; and (4) doubling the local hexahistidine concentration by exploiting Hsp31 dimerization further improves nanocrystal luminescence with the brightest particles obtained when His tags are spatially co-localized at the Hsp31 N-termini. Although hexahistidine tracts are not as efficient as combinatorially selected ZnS binding peptides at QD synthesis, it should be possible to use the large number of available His-tagged proteins and the synthesis approach described herein to produce luminescent nanoparticles whose protein shell carries a broad range of functions.     

Synthesis and luminescent spectral characteristics of porphyrin complexes with platinum group metals

The synthesis of natural and synthetic porphyrin complexes with Pt, Pd, Rh, and Ru is reported. Their electronic absorption spectra, phosphorescence spectra, and lifetimes at room temperature both in the presence and in the absence of oxygen were studied. It has been shown that the variation of the nature of the central metal atom and of the substituents in pyrrole and phenyl rings allows the obtaining of metalloporphyrins with various phosphorescence excitation and phosphorescing emission spectra at room temperature. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2008, vol. 34, no. 2; see also http://www.maik.ru.     

A novel fluorescent assay for oxytetracycline hydrochloride based on fluorescence quenching of water‐soluble CdTe nanocrystals

A novel assay for oxytetracycline hydrochloride (OTC) based on fluorescence quenching was developed from the interaction between functionalized cadmium telluride quantum dots (CdTe QDs) and OTC. Optimum conditions for the detection of OTC were found after investigating all factors. Under optimum conditions, luminescence of CdTe nanocrystals (λ_ex = 365 nm, λ_em = 562 nm) was quenched by OTC in a concentration‐dependent manner best described by a modified Stern‐Volmer type equation. Good linearity was obtained with a regression coefficient of 0.9999 in the range of 1.34 ~ 13.4 x 10^‐5 mol/L and a limit of detection of 3.08 x 10^‐7 mol/L. In addition, the quenching mechanism was also established. The results imply that the close proximity of OTC‐CdTe was driven by electrostatic attraction and the resulting effective electron transfer from OTC to QDs could be responsible for fluorescence quenching of CdTe‐QDs. Copyright © 2012 John Wiley & Sons, Ltd.