Overexpression of the dnaA gene in Escherichia coli B/r: chromosome and minichromosome replication in the presence of rifampin.

The replication of chromosomes and minichromosomes in Escherichia coli B/r was examined under conditions in which the dnaA gene product was overproduced. Increased levels of the DnaA protein were achieved by thermoinduction of the dnaA gene, under the control of the lambda pL promoter, or by cellular maintenance of multicopy plasmids carrying the dnaA gene under the control of its own promoters. Previous work has shown that overproduction of DnaA protein stimulates replication of the chromosomal origin, oriC, but that the newly initiated forks do not progress along the length of the chromosome (T. Atlung, K. V. Rasmussen, E. Clausen, and F. G. Hansen, p. 282-297, in M. Schaechter, F. C. Neidhardt, J. L. Ingraham, and N. O. Kjeldgaard, ed., The Molecular Biology of Bacterial Growth, 1985). In the present study, it was found that overproduction of DnaA protein caused both a two- to threefold increase in the amount of residual chromosome replication and an extended synthesis of minichromosome DNA in the presence of rifampin. The amount of residual chromosome replication was consistent with the appearance of functional replication forks on the majority of the chromosomes. Since the rate of DNA accumulation and the cellular DNA/mass ratios were not increased significantly by overexpression of the dnaA gene, we concluded that the addition of rifampin either enabled stalled replication forks to proceed beyond oriC or enabled new forks to initiate on both chromosomes and minichromosomes, or both.     

Cloning and characterization of dnaA(Cs), a mutation which leads to overinitiation of DNA replication in Escherichia coli K-12.

The product of the dnaA gene is essential for the initiation of chromosomal DNA replication in Escherichia coli K-12. A cold-sensitive mutation, dnaA(Cs), was originally isolated as a putative intragenic suppressor of the temperature sensitivity of a dnaA46 mutant (G. Kellenberger-Gujer, A. J. Podhajska, and L. Caro, Mol. Gen. Genet. 162:9-16, 1978). The cold sensitivity of the dnaA(Cs) mutant was attributed to a loss of replication control resulting in overinitiation of DNA replication. We cloned and sequenced the dnaA gene from the dnaA(Cs) mutant and showed that it contains three point mutations in addition to the original dnaA46(Ts) mutation. The dnaA(Cs) mutation was dominant to the wild-type allele. Overproduction of the DnaA(Cs) protein blocked cell growth. In contrast, overproduction of wild-type DnaA protein reduced the growth rate of cells but did not stop cell growth. Thus, the effect of elevated levels of the DnaA(Cs) protein was quite different from that of the wild-type protein under the same conditions.     

Dominance of dnaA+ to dnaA in Escherichia coli.

The dominance of dnaA+ to the dnaA508 mutation was complete and was unaffected by the presence of a copy of the chromosomal replication origin on the episome. These results prove that the dnaA gene of Escherichia coli produces a diffusible product.     

Temporal sequence of events during the initiation process in Escherichia coli deoxyribonucleic acid replication: roles of the dnaA and dnaC gene products and ribonucleic acid polymerase.

Three thermosensitive deoxyribonucleic acid (DNA) initiation mutants of Escherichia coli exposed to the restrictive temperature for one to two generations were examined for the ability to reinitiate DNA replication after returning to the permissive temperature in the presence of rifampin, chloramphenicol, or nalidixic acid. Reinitiation in the dnaA mutant was inhibited by rifampin but not by chloramphenicol, whereas renitiation was not inhibited by rifampin but not by chloramphenicol, whereas reinitiation was not inhibited in two dnaC mutants by either rifampin or chloramphenicol. To observe the rifampin inhibition, the antibiotic must be added at least 10 min before return to the permissive temperature. The rifampin inhibition of reinitiation was not observed when a rifampin-resistant ribonucleic acid ((RNA) polymerase gene was introduced into the dnaA mutant, demonstrating that RNA polymerase synthesizes one or more RNA species required for the initation of DNA replication (origin-RNA). Reinitiation at 30 degrees C was not inhibited by streptolydigin in a stretolydigin-sensitive dnaA muntant. Incubation in the presence of nalidixic acid prevented subsequent reinitiation in the dnaC28 mutant but did not inhibit reinitiation in the dnaA5 muntant. These results demonstrate that the dnaA gene product acts before or during the synthesis of an origin-RNA, RNA polymerase synthesizes this origin RNA, and the dnaC gene product is involved in a step after this RNA synthesis event. Furthermore, these results suggest that the dnaC gene product is involved in the first deoxyribounucleotide polymerization event wheareas the dnaA gene product acts prior to this event. A model is presented describing the temporal sequence of events that occur during initiation of a round of DNA replication, based on results in this and the accompanying paper.     

Purification and characterization of the dnaA46 gene product

The alleles of dnaA46, dnaA5, and dnaA204 have been cloned from the Escherichia coli chromosome into a protein-overproducing vector. Under conditions of induced expression, similar amounts of dnaA46 and dnaA5 gene products and less of the dnaA204 gene product were observed. Facilitated by elevated expression levels, an improved method for purification of dnaA+ protein and the purification of dnaA46 protein have been obtained. The replication activity of dnaA46 protein did not appear to be thermolabile upon prior incubation at various temperatures. Thermolabile replication activity was observed under conditions of coupled DNA synthesis. In contrast with the wild type protein, DNA synthesis dependent on dnaA46 protein showed a pronounced lag before incorporation of deoxyribonucleotides.     

Integrative and free Spiroplasma citri oriC plasmids: expression of the Spiroplasma phoeniceum spiralin in Spiroplasma citri.

The replication region (oriC) of the Spiroplasma citri chromosome has been recently sequenced, and a 2-kbp DNA fragment was characterized as an autonomously replicating sequence (F. Ye, J. Renaudin, J. M. Bové, and F. Laigret, Curr. Microbiol. 29:23-29, 1994). In the present studies, we have combined this DNA fragment, containing the dnaA gene and the flanking dnaA boxes, with a ColE1-derived Escherichia coli replicon and the Tet M determinant, which confers resistance to tetracycline. The recombinant plasmid, named pBOT1, was introduced into S. citri cells, in which it replicated. Plasmid pBOT1 was shuttled from E. coli to S. citri and back to E. coli. In S. citri, replication of pBOT1 did not require the presence of a functional dnaA gene on the plasmid. However, the dnaA box region downstream of the dnaA gene was essential. Upon passaging of the S. citri transformants, the plasmid integrated into the spiroplasmal host chromosome by recombination at the replication origin. The integration process led to duplication of the oriC sequences. In contrast to the integrative pBOT1, plasmid pOT1, which does not contain the E. coli replicon, was stably maintained as a free extrachromosomal element. Plasmid pOT1 was used as a vector to introduce into S. citri the G fragment of the cytadhesin P1 gene of Mycoplasma pneumoniae and the spiralin gene of Spiroplasma phoeniceum. The recombinant plasmids, pOTPG with the G fragment and pOTPS with the spiralin gene, were stably maintained in spiroplasmal transformants. Expression of the heterologous S. phoeniceum spiralin in S. citri was demonstrated by Western immunoblotting.     

Plasmid ColE1 DNA replication in Escherichia coli strains temperature-sensitive for DNA replication

Mutants of the dnaA, dnaC, dnaD, polC, dnaF and dnaG gene loci were tested for their capacity for colicinogenic plasmid E1 (ColE1) replication at a non-permissive temperature. It was found that ColE1 replication was independent of the dnaA gene function and dependent on dnaC, D, F and G. ColE1 replication in the polC mutant E486 continued for several hours but at a greatly reduced rate. No effect was found of the dnaG mutation on thymine-deprivation-induced "priming" of ColE1 replication at the non-permissive temperature. The mutants also were tested for aberrant replication intermediates of plasmid DNA as well as a temperature sensitive supercoiled DNA-protein relaxation complex. RNA-containing supercoils were found to accumulate in a poIC mutant also blocked for protein synthesis.     

Genetic structure of the dnaA region of the cyanobacterium Synechocystis sp. strain PCC6803.

We have cloned and sequenced the dnaA region of Synechocystis sp. strain PCC6803, a bacterium with a light-dependent cell cycle. The dnaA gene product, DnaA, is the central factor for replication initiation in bacteria. The deduced amino acid sequence of the protein encoded by the cyanobacterial dnaA gene is 45% identical to DnaA of Bacillus subtilis and fits very well into the homology pattern of the known eubacterial DnaA proteins. The genetic environment of the Synechocystis sp. strain PCC6803 dnaA gene is completely different from the one in other eubacteria. An open reading frame of unknown function, orf134, was detected upstream of dnaA. The purT gene homolog encoding the glycinamide ribonucleotide transformylase T starts about 200 bp away from this open reading frame in the opposite direction. Downstream of the dnaA gene we detected the start of the psbDC operon, which codes for the photosystem II reaction center proteins D2 and CP43 that are involved in the positioning of chlorophyll a.     

Involvement of the ribulosephosphate epimerase gene in the dnaA and dnaR functions for initiation of chromosome replication in Escherichia coli

Initiation of replication of the Escherichia coli chromosome is rendered temperature-sensitive by the dnaR130 mutation in the prs gene that encodes phosphoribosylpyrophosphate synthetase. The thermosensitivity of the dnaR mutant is suppressed by a spontaneous mutation in rpe , the gene encoding ribulosephosphate epimerase. Disruption of the rpe gene reverses the thermosensitive growth of the dnaR mutant. The rpe -disrupted dnaR mutant exhibits extensive DNA synthesis at low and high temperatures, as does the dnaR  ⁺ rpe disruptant and the dnaR  ⁺ rpe ⁺ strain. The thermoresistant DNA synthesis in the rpe dnaR double mutant is dnaA dependent, because the dnaA167 mutation renders the synthesis thermosensitive. The rpe -knockout mutation abolishes the ability of the dnaA115 allele to complement the defect of the dnaA167 mutant with or without the dnaR mutation and diminishes the dnaR -complementing ability of the dnaR224 allele. These results show that the rpe product is involved in the functions of the products of both dnaA and dnaR for initiation of replication of the bacterial chromosome.     

Purification of the E. coli dnaA gene product.

The product of the dnaA gene of Escherichia coli was isolated in a highly enriched form. The purification product binds specifically to DNA containing the E. coli chromosomal origin of replication, oriC.     

Suppression of an Escherichia coli dnaA mutation by the integrated R factor R100.1: origin of chromosome replication during exponential growth.

We have investigated the behavior, during exponential growth, of strains of Escherichia coli carrying a dnaA(Ts) mutation that has been suppressed by the integration of the F-like R plasmid R100.1. We present evidence showing that replication in these strains proceeds largely from the normal chromosome origin at 30 degrees C, a permissive temperature for the dnaA(Ts) gene product, whereas, at 42 degrees C, replication proceeds largely from the integrated plasmid. These conclusions are based on measurements made by deoxyribonucleic acid:deoxyribonucleic acid hybridization of the relative frequencies of the prophages Mu-1 and lambdaind- and R100.1 integrated at known locations on the E. coli chromosome in these Hfr strains.     

Isolation of a temperature-sensitive dnaA mutant of Staphylococcus aureus

Of 750 temperature-sensitive mutants of Gram-positive Staphylococcus aureus, one was complemented by the dnaA gene. This mutant had a single base transition in the dnaA gene causing the amino-acid substitution mutation, Ala40Thr. Phage transduction experiments showed that this temperature-sensitive phenotype was linked with a drug-resistant marker inserted near the dnaA gene, suggesting the dnaA mutation is responsible for the phenotype. Flow cytometric analysis revealed that the dnaA mutant was unable to initiate DNA replication at a restrictive temperature and exhibited asynchrony in the replication initiation at a permissive temperature. This is the first report of a temperature-sensitive dnaA mutant in S. aureus, and the results show that DnaA is required for the initiation of chromosomal replication and for the regulation of synchrony in the bacterial cells.     

Mapping of replication initiation site in Mycoplasma capricolum genome by two-dimensional gel-electrophoretic analysis.

The homolog of the dnaA gene, which has been reported to be present in the vicinity of the initiation site of replication in the genome of Mycoplasma capricolum (M.Miyata, L.Wang, and T.Fukumura, J. Bacteriol. 175: 655-660, 1993) was mapped precisely. A 9540-bp region containing the dnaA gene was cloned and the entire region was sequenced with the exception of a previously reported region of 2517 bp (Fujita, M.Q., Yoshikawa, H. and Ogasawara, N. Gene 93: 73-78, 1992). The organization of the 9540-bp region was compared with that of corresponding regions in other bacteria. The arrangement and directions of rnpA, rpmH, dnaA, dnaN were conserved, but no other open reading frames were found that were homologous to those that are commonly found around dnaA genes in other bacteria. The directions of movement of the replication fork around the dnaA gene were analyzed by neutral/alkaline two-dimensional gel electrophoresis. The forks developed in a 1569-bp region that consisted of the dnaA structural gene and its downstream non-coding region, and then they proceeded bidirectionally.     

Cooperation of the prs and dnaA gene products for initiation of chromosome replication in Escherichia coli.

A new Escherichia coli mutant allele, named dnaR, that causes thermosensitive initiation of chromosome replication has been identified to be an allele of the prs gene, the gene for phosphoribosylpyrophosphate synthetase (Y. Sakakibara, J. Mol. Biol. 226:979-987, 1992; Y. Sakakibara, J. Mol. Biol. 226:989-996, 1992). The dnaR mutant became temperature resistant by acquisition of a mutation in the dnaA gene that did not affect the intrinsic activity for the initiation of replication. The suppressor mutant was capable of initiating replication from oriC at a high temperature restrictive for the dnaR single mutant. The thermoresistant DNA synthesis was inhibited by the presence of the wild-type dnaA allele at a high but not a low copy number. The synthesis was also inhibited by an elevated dose of a mutant dnaR allele retaining dnaR activity. Therefore, thermoresistant DNA synthesis in the suppressor mutant was dependent on both the dnaA and the dnaR functions. On the basis of these results, I conclude that the initiation of chromosome replication requires cooperation of the prs and dnaA products.     

Interactions of DNA replication factors in vivo as detected by introduction of suppressor alleles of dnaA into other temperature-sensitive dna mutants.

Suppressor mutations located within dnaA can suppress the temperature sensitivity of a dnaZ polymerization mutant, indicating in vivo interaction of the products of these genes. The suppressor allele of dnaA [designated dnaA(SUZ, Cs)] could not be introduced, even at the permissive temperature, by transduction into temperature-sensitive (Ts) dnaC or dnaG recipients; it was transduced into dnaB(Ts) and dnaE(Ts) strains but at very low frequency. Recipient cells which were dnaA+ dnaE(Ts) were killed by the incoming dnaA(SUZ, Cs) allele, and it is presumed that combinations of dnaA(SUZ, Cs) with dnaB(Ts), dnaC(Ts), or dnaG(Ts) are lethal also. In one specific case, the lethality required the presence of three alleles: the incoming dnaA suppressor mutation, the resident dnaA+ gene, and the dnaB(Ts) gene. This was shown by the fact that dnaB(Ts) could readily be introduced into a dnaA(SUZ, Cs) dnaB+ recipient. That is, in the absence of dnaA+, the dnaA suppressor and dnaB(Ts) double mutant was stable. One model to explain these results proposes that the dnaA protein functions not only in initiation but also in the replication complex which contains multiple copies of dnaA and other replication factors.     

Functionality of the dnaA protein binding site in DNA replication is orientation-dependent

We analyzed the functionality of different dnaA protein binding sites by assaying in vitro dnaA-dependent replication of pBR322 derivatives. Single dnaA sites from oriC and from the mioC and dnaA gene promoters were active when combined with the primer generating element of pBR322 in a proper distance. Prereplisome assembly did not require sequences in addition to the 9-base pair consensus dnaA binding site. Inversion of the structurally asymmetric dnaA site relative to its orientation in wild type pBR322 resulted in a marked reduction in replication efficiency, as observed with five different dnaA sites studied. The direction of DNA replication was not affected.