A hisT::Tn5 mutation affects production of microcins B17, C7, and H47 and colicin V.

A Tn5 insertion decreasing the production of microcin B17 was mapped to 50.2 min on the Escherichia coli chromosome map. Sequence analysis showed that the insertion disrupted hisT, the gene encoding pseudouridine synthase I, a tRNA-modifying enzyme. hisT::Tn5 mutant cells were also shown to be defective for the production of other antibiotic peptides, such as microcin C7, microcin H47, and colicin V.     

Escherichia coli outer membrane protein TolC is involved in production of the peptide antibiotic microcin J25

A Tn5 insertion in tolC eliminated microcin J25 production. The mutation had little effect on the expression of the microcin structural gene and presumably acted by blocking microcin secretion. The tolC mutants carrying multiple copies of the microcin genes were less immune to the microcin. TolC is thus likely a component of a microcin export complex containing the McjD immunity protein, an ABC exporter.     

Protective action of ppGpp in microcin J25-sensitive strains

As Escherichia coli strains enter the stationary phase of growth they become more resistant to the peptide antibiotic microcin J25. It is known that starvation for nutrients such as amino acids or glucose leads to increases in guanosine 3',5'-bispyrophosphate (ppGpp) levels and that the intracellular concentration of this nucleotide increases as cells enter the stationary phase of growth. Therefore, we examined the effects of artificially manipulating the ppGpp levels on sensitivity to microcin J25. A direct correlation was found between ppGpp accumulation and microcin resistance. Our results indicate that the nucleotide is required to induce production of YojI, a chromosomally encoded efflux pump which, in turn, expels microcin from cells. This would maintain the intracellular level of the antibiotic below a toxic level.     

Plasmid genes required for microcin B17 production.

The production of the antibiotic substance microcin B17 (Mcc) is determined by a 3.5-kilobase DNA fragment from plasmid pMccB17. Several Mcc- mutations on plasmid pMccB17 were obtained by both transposon insertion and nitrosoguanidine mutagenesis. Plasmids carrying these mutations were tested for their ability to complement Mcc- insertion or deletion mutations on pMM102 (pMM102 is a pBR322 derivative carrying the region encoding microcin B17). Results from these experiments indicate that at least four plasmid genes are required for microcin production.     

YojI of Escherichia coli functions as a microcin J25 efflux pump

In the present study, we showed that yojI, an Escherichia coli open reading frame with an unknown function, mediates resistance to the peptide antibiotic microcin J25 when it is expressed from a multicopy vector. Disruption of the single chromosomal copy of yojI increased sensitivity of cells to microcin J25. The YojI protein was previously assumed to be an ATP-binding-cassette-type exporter on the basis of sequence similarities. We demonstrate that YojI is capable of pumping out microcin molecules. Thus, one obvious explanation for the protective effect against microcin J25 is that YojI action keeps the intracellular concentration of the peptide below a toxic level. The outer membrane protein TolC in addition to YojI is required for export of microcin J25 out of the cell. Microcin J25 is thus the first known substrate for YojI.     

The Ile13 residue of microcin J25 is essential for recognition by the receptor FhuA, but not by the inner membrane transporter SbmA

Entry of the peptide antibiotic microcin J25 (MccJ25) into target cells is mediated by the outer membrane receptor FhuA and the inner membrane protein SbmA. The latter also transports MccB17 into the cell cytoplasm. Comparison of MccJ25 and MccB17 revealed a tetrapeptide sequence (VGIG) common to both antibiotics. We speculated that this structural feature in MccJ25 could be a motif recognized by SbmA. To test this hypothesis, we used a MccJ25 variant in which the isoleucine in VGIG (position 13 in the MccJ25 sequence) was replaced by lysine (I13K). In experiments in which the FhuA receptor was bypassed, the substituted microcin showed an inhibitory activity similar to that of the wild-type peptide. Moreover, MccJ25 interfered with colicin M uptake by FhuA in a competition assay, while the I13K mutant did not. From these results, we propose that the Ile¹³ residue is only required for interaction with FhuA, and that VGIG is not a major recognition element by SbmA.     

The Leucine-Responsive Regulatory Protein, Lrp, Modulates Microcin J25 Intrinsic Resistance in Escherichia coli by Regulating Expression of the YojI Microcin Exporter

Many Escherichia coli K-12 strains display an intrinsic resistance to the peptide antibiotic microcin J25. In this study, we present results showing that the leucine-responsive regulatory protein, Lrp, is involved in this phenotype by acting as a positive regulator of YojI, a chromosomally encoded efflux pump which expels microcin out of cells. Exogenous leucine antagonizes the effect of Lrp, leading to a diminished expression of the pump and an increased susceptibility to microcin J25.     

Molecular characterization of a DNA fragment carrying the basic replicon of pTUC100, the natural plasmid encoding the peptide antibiotic microcin J25 system

The Escherichia coli plasmid pTUC100 encodes production of, and immunity to, the peptide antibiotic microcin J25. In the present study, an approximately 8-kb fragment immediately adjacent to the previously sequenced microcin region was isolated and its DNA sequence was determined. The main features of the newly characterized region are: (i) a basic replicon which is almost identical to that of the RepFIIA plasmid R100; (ii) two ORFs with 96% identity to two ORFs of unknown function on pO157, a large plasmid harbored by enterohemorragic E. coli, and a large ORF which does not show significant homology to any other reported nucleotide or protein sequence; and (iii) two intact insertion sequences, IS1294 and IS1. Sequence analysis, as well as that of the G+C content of both the 8-kb fragment and the previously sequenced microcin locus, lead us to propose that plasmid pTUC100 is a composite structure assembled from DNA elements from various sources.     

Cloning and sequencing of the pheU gene for tRNAPhe of Thermus thermophilus HB8, and genomic mapping of the pheU and pheST genes

Abstract The effect of the iron content of the medium on the yield of the peptide antibiotic microcin 25 was examined; synthesis was optimal in minimal media and was reduced by adding iron. Escherichia coli AY25, the wild-type producer of the antibiotic, showed a 95% decrease in microcin yield when grown in minimal medium containing 10 μM iron (high iron) as compared to 0.2 μM (low iron). Addition of chelators to Luria broth elicited microcin production, and there was a complete reversal of the effect of the chelators by adding iron. Studies with Escherichia coli mutants deficient in iron-regulated proteins ( fur ) suggested that factors other than Fur could mediate iron regulation of microsin synthesis.     

In vivo reconstitution of the FhuA transport protein of Escherichia coli K-12

The FhuA protein in the outer membrane of Escherichia coli actively transports ferrichrome and the antibiotics albomycin and rifamycin CGP 4832 and serves as a receptor for the phages T1, T5, and phi80 and for colicin M and microcin J25. The crystal structure reveals a beta-barrel with a globular domain, the cork, which closes the channel formed by the barrel. Genetic deletion of the cork resulted in a beta-barrel that displays no FhuA activity. A functional FhuA was obtained by cosynthesis of separately encoded cork and the beta-barrel domain, each endowed with a signal sequence, which showed that complementation occurs after secretion of the fragments across the cytoplasmic membrane. Inactive complete mutant FhuA and an FhuA fragment containing 357 N-proximal amino acid residues complemented the separately synthesized wild-type beta-barrel to form an active FhuA. Previous claims that the beta-barrel is functional as transporter and receptor resulted from complementation by inactive complete FhuA and the 357-residue fragment. No complementation was observed between the wild-type cork and complete but inactive FhuA carrying cork mutations that excluded the exchange of cork domains. The data indicate that active FhuA is reconstituted extracytoplasmically by insertion of separately synthesized cork or cork from complete FhuA into the beta-barrel, and they suggest that in wild-type FhuA the beta-barrel is formed prior to the insertion of the cork.     

The peptide antibiotic microcin 25 is imported through the TonB pathway and the SbmA protein.

Selection of spontaneous mutants for insensitivity to the peptide antibiotic microcin 25 led to the isolation of five categories of mutants. Phenotypic and mapping studies showed the mutations to be located in the fhuA, exb, tonB, and sbmA genes. The latter encodes a cytoplasmic membrane protein which is also required for the penetration of microcin B17.     

Microcin J25 uptake: His5 of the MccJ25 lariat ring is involved in interaction with the inner membrane MccJ25 transporter protein SbmA

Escherichia coli microcin J25 (MccJ25) is a plasmid-encoded antibiotic peptide consisting of 21 L-amino acid residues (G1-G-A-G-H5-V-P-E-Y-F10-V-G-I-G-T15-P-I-S-F-Y20-G). E. coli RNA polymerase (RNAP) is the intracellular target of MccJ25. MccJ25 enters cells after binding to specific membrane transporters: FhuA in the outer membrane and SbmA in the inner membrane. Here, we studied MccJ25 mutants carrying a substitution of His5 by Lys, Arg, or Ala. The inhibitory effects on cellular growth and in vitro RNAP activity were determined for each mutant microcin. The results show that all mutants inhibited RNAP in vitro. However, the mutants were defective in their ability to inhibit cellular growth. Experiments in which the FhuA protein was bypassed showed that substitutions of MccJ25 His5 affected the SbmA-dependent transport. Our results thus suggest that MccJ25 His5 located in the lariat ring is involved, directly or indirectly, in specific interaction with SbmA and is not required for MccJ25 inhibition of RNAP.     

Inhibition of Salmonella enterica serovars by microcin J25

Escherichia coli microcin J25 (MccJ25) is a 2107-Da peptide antibiotic whose uptake into E. coli is mediated by the outer-membrane receptor FhuA and the inner membrane proteins TonB, ExbB, ExbD, and SbmA. A survey of the sensitivity of several Salmonella enterica serovars showed that the antibiotic was highly active against some serovars, while S. Typhimurium, S. Derby, and some S. Enteritidis strains were completely resistant. Resistant strains became hypersensitive to MccJ25 when given the fhuA gene of E. coli, indicating that insensitivity is due to the inability of the FhuA protein to mediate penetration of MccJ25. Whereas in E. coli MccJ25 targets RNA polymerase, in S. Typhimurium it inhibits not only RNA synthesis but also cell respiration. Fluorescence viability staining showed that S. Typhimurium cells exposed to MccJ25 remain viable but are unable to form colonies.     

Structure, organization and characterization of the gene cluster involved in the production of microcin E492, a channel-forming bacteriocin

Microcin E492 is a low-molecular-weight, channel-forming bacteriocin produced and excreted by Klebsiella pneumoniae RYC492. A 13 kb chromosomal DNA fragment from K. pneumoniae RYC492 was sequenced, and it was demonstrated by random Tn5 mutagenesis that most of this segment, which has at least 10 cistrons, is needed for the production of active microcin and its immunity protein. Genes mceG and mceH correspond to an ABC exporter and its accessory protein, respectively, and they are closely related to the colicin V ABC export system. The microcin E492 system also requires the product of gene mceF as an additional factor for export. Despite the fact that this bacteriocin lacks post-translational modifications, genes mceC, mceI and mceJ are needed for the production of active microcin. Genes mceC and mceI are homologous to a glycosyl transferase and acyltransferase, respectively, whereas mceJ has no known homologue. Mutants in these three genes secrete an inactive form of microcin, able to form ion channels in a phospholipidic bilayer, indicating that the mutation of these microcin genes does not alter the process of membrane insertion. On the other hand, microcin isolated from mutants in genes mceC and mceJ has a lethal effect when incubated with spheroplasts of sensitive cells, indicating that the microcin defects in these mutants are likely to alter receptor recognition at the outer membrane. A model for synthesis and export is proposed as well as a novel maturation pathway that would involve conformational changes to explain the production of active microcin E492.     

Sequence analysis of the four plasmid genes required to produce the circular peptide antibiotic microcin J25

A 4.8-kb plasmid region carrying the four genes mcjABCD necessary for production of and immunity to the cyclic peptide antibiotic microcin J25 (MccJ25) has been sequenced. mcjA encodes the primary structure of MccJ25 as a precursor endowed with an N-terminal extension of 37 amino acids. The products of mcjB and mcjC are thought to be involved in microcin maturation, which implies cleavage of McjA and head-tail linkage of the 21-residue pro-MccJ25. The predicted McjD polypeptide, which is highly similar to several ABC exporters, was found to be required for MccJ25 secretion, thus explaining its ability to confer immunity to MccJ25.     

Cloning and mapping of the genetic determinants for microcin C51 production and immunity

Microcin C51 is a small peptide antibiotic produced by Escherichia coli cells harbouring the 38 kb low copy number plasmid pC51, which codes for microcin production and immunity. The genetic determinants for microcin synthesis and immunity were cloned into the vectors pBR325, pUC19 and pACYC184. Physical and phenotypic analysis of deletion derivatives and mutant plasmids bearing insertions of transposon Tn5 showed that a DNA fragment of about 5 kb is required for microcin C51 synthesis and expression of complete immunity to microcin. Partial immunity can be provided by a 2 kb DNA fragment. Mutant plasmids were tested for their ability to complement Mic^– mutations. Results of these experiments indicate that at least three plasmid genes are required for microcin production. The host OmpR function is also necessary for microcin C51 synthesis.     

Chemical modification of microcin J25 with diethylpyrocarbonate and carbodiimide: evidence for essential histidyl and carboxyl residues

In this paper we compared the antibacterial activity of native microcin J25, a peptide antibiotic, with the activities of two analogues obtained by chemical modifications. In the first analogue, the negative charge of glutamic carboxyl group was specifically blocked with an L-glycine methyl ester and in the second the histidine imidazole ring was carbethoxylated. Both analogues decreased notably its antibiotic activity against Escherichia coli and Salmonella newport, strains sensible to the native microcin J25. The biological activity of the carbethoxylated analogue was completely recovered after treatment with hydroxylamine. The extreme importance of both polar residues could be interpreted as specific structural features indispensable for the peptide transportation into the cell, extrusion outside the cell or alternatively to inhibit the RNA-polymerase.     

Microcin R51 and a plasmid determining its synthesis

A new microcin produced by an Citrobacter R51 strain has been detected. This antibiotic has been shown to inhibit the growth of a number of Gram-negative as well as Gram-positive strains of bacteria on the minimal medium plates. The properties of partially purified microcin were characterized. Constitutive synthesis of microcin is determined by a conjugative plasmid. The genes of microcin synthesis and immunity were cloned on a plasmid and plasmid vehicles. A physical map of the 12 kb fragment coding for the production of microcin R51 and immunity to this antibiotic is presented.     

Phenomic and genomic approaches to studying the inhibition of multiresistant Salmonella enterica by microcin J25

In livestock production, antibiotics are used to promote animal growth, control infections and thereby increase profitability. This practice has led to the emergence of multiresistant bacteria such as Salmonella, of which some serovars are disseminated in the environment. The objective of this study is to evaluate microcin J25 as an inhibitor of Salmonella enterica serovars of various origins including human, livestock and food. Among the 116 isolates tested, 37 (31.8%) were found resistant to at least one antibiotic, and 28 were multiresistant with 19 expressing the penta-resistant phenotype ACSSuT. Microcin J25 inhibited all isolates, with minimal inhibitory concentration values ranging from 0.06 μg/ml (28.4 nM) to 400 μg/ml (189 μM). Interestingly, no cross-resistance was found between microcin J25 and antibiotics. Multiple sequence alignments of genes encoding for the different proteins involved in the recognition and transport of microcin J25 showed that only ferric-hydroxamate uptake is an essential determinant for susceptibility of S. enterica to microcin J25. Examination of Salmonella strains exposed to microcin J25 by transmission electronic microscopy showed for the first-time involvement of a pore formation mechanism. Microcin J25 was a strong inhibitor of several multiresistant isolates of Salmonella and may have a great potential as an alternative to antibiotics.     

Genetic insertion and exposure of a reporter epitope in the ferrichrome-iron receptor of Escherichia coli K-12.

The ferrichrome-iron receptor of Escherichia coli K-12 is FhuA (M(r), 78,992), the first component of an energy-dependent, high-affinity iron uptake pathway. FhuA is also the cognate receptor for bacteriophages T5, T1, phi 80, and UC-1, for colicin M and microcin 25, and for albomycin. To probe the topological organization of FhuA which enables recognition of these different ligands, we generated a library of 16 insertion mutations within the fhuA gene. Each insertion spliced a 13-amino-acid antigenic determinant (the C3 epitope of poliovirus) at a different position within FhuA. Immunoblotting of outer membranes with anti-FhuA and anti-C3 antibodies indicated that 15 of 16 FhuA.C3 proteins were present in the outer membrane in amounts similar to that observed for plasmid-encoded wild-type FhuA. One chimeric protein with the C3 epitope inserted after amino acid 440 of FhuA was present in the outer membrane in greatly reduced amounts. Strains overexpressing FhuA.C3 proteins were subjected to flow cytometric analysis using anti-FhuA monoclonal antibodies. Such analysis showed that (i) the chimeric proteins were properly localized and (ii) the wild-type FhuA protein structure had not been grossly altered by insertion of the C3 epitope. Twelve of sixteen strains expressing FhuA.C3 proteins were proficient in ferrichrome transport and remained sensitive to FhuA-specific phages. Three FhuA.C3 proteins, with insertions after amino acid 321, 405, or 417 of FhuA, were detected at the cell surface by flow cytometry using anti-C3 antibodies. These three chimeric proteins were all biologically active. We conclude that amino acids 321, 405, and 417 are surface accessible in wild-type FhuA.