Intertwined structure of the DNA-binding domain of intron endonuclease I-TevI with its substrate.

I-TevI is a site-specific, sequence-tolerant intron endonuclease. The crystal structure of the DNA-binding domain of I-TevI complexed with the 20 bp primary binding region of its DNA target reveals an unusually extended structure composed of three subdomains: a Zn finger, an elongated segment containing a minor groove-binding alpha-helix, and a helix-turn-helix. The protein wraps around the DNA, mostly following the minor groove, contacting the phosphate backbone along the full length of the duplex. Surprisingly, while the minor groove-binding helix and the helix-turn- helix subdomain make hydrophobic contacts, the few base-specific hydrogen bonds occur in segments that lack secondary structure and flank the intron insertion site. The multiple base-specific interactions over a long segment of the substrate are consistent with the observed high site specificity in spite of sequence tolerance, while the modular composition of the domain is pertinent to the evolution of homing endonucleases.     

Intron-encoded endonuclease I-TevI binds as a monomer to effect sequential cleavage via conformational changes in the td homing site.

I-TevI, the intron-encoded endonuclease from the thymidylate synthase (td) gene of bacteriophage T4, binds its DNA substrate across the minor groove in a sequence-tolerant fashion. We demonstrate here that the 28 kDa I-TevI binds the extensive 37 bp td homing site as a monomer and significantly distorts its substrate. In situ cleavage assays and phasing analyses indicate that upon nicking the bottom strand of the td homing site, I-TevI induces a directed bend of 38 degrees towards the major groove near the cleavage site. Formation of the bent I-TevI-DNA complex is proposed to promote top-strand cleavage of the homing site. Furthermore, reductions in the degree of distortion and in the efficiency of binding base-substitution variants of the td homing site indicate that sequences flanking the cleavage site contribute to the I-TevI-induced conformational change. These results, combined with genetic, physical and computer-modeling studies, form the basis of a model, wherein I-TevI acts as a hinged monomer to induce a distortion that widens the minor groove, facilitating access to the top-strand cleavage site. The model is compatible with both unmodified DNA and glucosylated hydroxymethylcytosine-containing DNA, as exists in the T-even phages.     

SegG endonuclease promotes marker exclusion and mediates co-conversion from a distant cleavage site

Bacteriophages T2 and T4 are closely related T-even phages. However, T4 genetic markers predominate in the progeny of mixed infections, a phenomenon termed marker exclusion. One region previously mapped where the frequency of T2 markers in the progeny is extremely low is located around gene 32. Here, we describe SegG, a GIY-YIG family endonuclease adjacent to gene 32 of phage T4 that is absent from phage T2. In co-infections with T2 and T4, cleavage in T2 gene 32 by T4-encoded SegG initiates a gene conversion event that results in replacement of T2 gene 32 markers with the corresponding T4 sequence. Interestingly, segG inheritance is limited, apparently because of the physical separation of its cleavage and insertion sites, which are 332 base-pairs apart. This contrasts with efficient inheritance of the phage T4 td group I intron and its endonuclease, I-TevI, for which the distance separating the I-TevI cleavage site and td insertion site is 23 base-pairs. Furthermore, we show that co-conversion tracts generated by repair of SegG and I-TevI double-strand breaks contribute to the localized exclusion of T2 markers. Our results demonstrate that the endonuclease activities of SegG and I-TevI promote the spread of these two endonucleases to progeny phage, consistent with their role as selfish genetic elements, and also provide a mechanism by which the genetic contribution of T2 markers to progeny phage is reduced.     

Intron mobility in phage T4 is dependent upon a distinctive class of endonucleases and independent of DNA sequences encoding the intron core: mechanistic and evolutionary implications

Although mobility of the phylogenetically widespread group I introns appears to be mechanistically similar, the phage T4 intron-encoded endonucleases that promote mobility of the td and sunY introns are different from their eukaryotic counterparts. Most notably, they cleave at a distance from the intron insertion sites. The td enzyme was shown to cleave 23-26 nt 5' and the sunY endonuclease 13-15 nt 3' to the intron insertion site to generate 3-nt or 2-nt 3'-OH extensions, respectively. The absolute coconversion of exon markers between the distant cleavage and insertion sites is consistent with the double-strand-break repair model for intron mobility. As a further critical test of the model we have demonstrated that the mobility event is independent of DNA sequences that encode the catalytic intron core structure. Thus, in derivatives in which the lacZ or kanR coding sequences replace the intron, these marker genes are efficiently inserted into intron-minus alleles when the cognate endonuclease is provided in trans. The process is therefore endonuclease-dependent, rather than dependent on the intron per se. These findings, which imply that the endonucleases rather than the introns themselves were the primordial mobile elements, are incorporated into a model for the evolution of mobile introns.     

Perpetuating the homing endonuclease life cycle: identification of mutations that modulate and change I-TevI cleavage preference

Homing endonucleases are sequence-tolerant DNA endonucleases that act as mobile genetic elements. The ability of homing endonucleases to cleave substrates with multiple nucleotide substitutions suggests a high degree of adaptability in that changing or modulating cleavage preference would require relatively few amino acid substitutions. Here, using directed evolution experiments with the GIY-YIG homing endonuclease I-TevI that targets the thymidylate synthase gene of phage T4, we readily isolated variants that dramatically broadened I-TevI cleavage preference, as well as variants that fine-tuned cleavage preference. By combining substitutions, we observed an ∼10 000-fold improvement in cleavage on some substrates not cleaved by the wild-type enzyme, correlating with a decrease in readout of information content at the cleavage site. Strikingly, we were able to change the cleavage preference of I-TevI to that of the isoschizomer I-BmoI which targets a different cleavage site in the thymidylate synthase gene, recapitulating the evolution of cleavage preference in this family of homing endonucleases. Our results define a strategy to isolate GIY-YIG nuclease domains with distinct cleavage preferences, and provide insight into how homing endonucleases may escape a dead-end life cycle in a population of saturated target sites by promoting transposition to different target sites.     

A site-specific endonuclease and co-conversion of flanking exons associated with the mobile td intron of phage T4

The product of the td intron open reading frame (ORF) of phage T4 is required for high-frequency transfer of the intervening sequence from intron-plus (In+) to intron-minus (In-) alleles. In vivo studies have demonstrated that the td ORF product targets cleavage of td In- DNA, and that cleavage is correlated with intron inheritance [Quirk et al., Cell 56 (1989) 455-465]. In the present study we show by in vitro synthesis of the td intron ORF product, that the protein possesses endonuclease activity and efficiently cleaves double-stranded DNA at or near the site of intron integration. In addition, we demonstrate that intron insertion is accompanied by co-conversion of the flanking exon sequences. Co-conversion of markers within 50 nt surrounding the site of intron insertion occurred at a high frequency (80-100%), and decreased at greater distance from the intervening sequence. Co-conversion may provide a mechanism for maintaining exon-intron RNA contacts required for accurate splicing of the relocated intron. Cleavage of target DNA by an intron endonuclease and co-conversion of flanking exon sequences are both features associated with mobile introns of eukaryotes, indicating a common mechanism for intron transfer in the eukaryotic and prokaryotic kingdoms.     

Importance of a single base pair for discrimination between intron-containing and intronless alleles by endonuclease I-BmoI

Homing endonucleases initiate mobility of their host group I introns by binding to and cleaving lengthy recognition sequences that are typically centered on the intron insertion site (IS) of intronless alleles. Because the intron interrupts the endonucleases' recognition sequence, intron-containing alleles are immune to cleavage by their own endonuclease. I-TevI and I-BmoI are related GIY-YIG endonucleases that bind a homologous stretch of thymidylate synthase (TS)-encoding DNA but use different strategies to distinguish intronless from intron-containing substrates. I-TevI discriminates between substrates at the level of DNA binding, as its recognition sequence is centered on the intron IS. I-BmoI, in contrast, possesses a very asymmetric recognition sequence with respect to the intron IS, binds both intron-containing and intronless TS-encoding substrates, but efficiently cleaves only intronless substrate. Here, we show that I-BmoI is extremely tolerant of multiple substitutions around its cleavage sites and has a low specific activity. However, a single G-C base pair, at position -2 of a 39-base pair recognition sequence, is a major determinant for cleavage efficiency and distinguishes intronless from intron-containing alleles. Strikingly, this G-C base pair is universally conserved in phylogenetically diverse TS-coding sequences; this finding suggests that I-BmoI has evolved exquisite cleavage requirements to maximize the potential to spread to variant intronless alleles, while minimizing cleavage at its own intron-containing allele.     

Purification and substrate specificity of a T4 phage intron-encoded endonuclease.

The T4 phage td intron-encoded endonuclease (I-Tev I) cleaves the intron-deleted td gene (td delta I) 23 nucleotides upstream of the intron insertion site on the noncoding strand and 25 nucleotides upstream of this site on the coding strand, to generate a 2-base hydroxyl overhang in the 3' end of each DNA strand. I-Tev I-157, a truncated form in which slightly more than one third (88 residues) of the endonuclease is deleted, was purified to homogeneity and shown to possess endonuclease activity similar to that of I-TEV I, the full-length enzyme (245 residues). The minimal length of the td delta I gene that was cleaved by I-Tev I and I-Tev I-157 has been determined to be exactly 39 basepairs, from -27 (upstream in exon1) to +12 (downstream in exon2) relative to the intron insertion site. Similar to the full-length endonuclease, I-Tev I-157 cuts the intronless thymidylate synthase genes from such diverse organisms as Escherichia coli, Lactobacillus casei and the human. The position and nature of the in vitro endonucleolytic cut in these genes are homologous to those in td delta I. Point mutational analysis of the td delta I substrate based on the deduced consensus nucleotide sequence has revealed a very low degree of specificity on either side of the cleavage site, for both the full-length and truncated I-TEV I.     

Recombination-dependent DNA replication stimulated by double-strand breaks in bacteriophage T4.

We analyzed the mechanism of recombination-dependent DNA replication in bacteriophage T4-infected Escherichia coli using plasmids that have sequence homology to the infecting phage chromosome. Consistent with prior studies, a pBR322 plasmid, initially resident in the infected host cell, does not replicate following infection by T4. However, the resident plasmid can be induced to replicate when an integrated copy of pBR322 vector is present in the phage chromosome. As expected for recombination-dependent DNA replication, the induced replication of pBR322 required the phage-encoded UvsY protein. Therefore, recombination-dependent plasmid replication requires homology between the plasmid and phage genomes but does not depend on the presence of any particular T4 DNA sequence on the test plasmid. We next asked whether T4 recombination-dependent DNA replication can be triggered by a double-strand break (dsb). For these experiments, we generated a novel phage strain that cleaves its own genome within the nonessential frd gene by means of the I-TevI endonuclease (encoded within the intron of the wild-type td gene). The dsb within the phage chromosome substantially increased the replication of plasmids that carry T4 inserts homologous to the region of the dsb (the plasmids are not themselves cleaved by the endonuclease). The dsb stimulated replication when the plasmid was homologous to either or both sides of the break but did not stimulate the replication of plasmids with homology to distant regions of the phage chromosome. As expected for recombination-dependent replication, plasmid replication triggered by dsbs was dependent on T4-encoded recombination proteins. These results confirm two important predictions of the model for T4-encoded recombination-dependent DNA replication proposed by Gisela Mosig (p. 120-130, in C. K. Mathews, E. M. Kutter, G. Mosig, and P. B. Berget (ed.), Bacteriophage T4, 1983). In addition, replication stimulated by dsbs provides a site-specific version of the process, which should be very useful for mechanistic studies.     

Coincidence of cleavage sites of intron endonuclease I-TevI and critical sequences of the host thymidylate synthase gene

To maximize spread of their host intron or intein, many homing endonucleases recognize nucleotides that code for important and conserved amino acid residues of the target gene. Here, we examine the cleavage requirements for I-TevI, which binds a stretch of thymidylate synthase (TS) DNA that codes for functionally critical residues in the TS active site. Using an in vitro selection scheme, we identified two base-pairs in the I-TevI cleavage site region as important for cleavage efficiency. These were confirmed by comparison of I-TevI cleavage efficiencies on mutant and on wild-type substrates. We also showed that nicking of the bottom strand by I-TevI is not affected by mutation of residues surrounding the bottom-strand cleavage site, unlike other homing endonucleases. One of these two base-pairs is universally conserved in all TS sequences, and is identical with a previously identified cleavage determinant of I-BmoI, a related GIY-YIG endonuclease that binds a homologous stretch of TS-encoding DNA. The other base-pair is conserved only in a subset of TS genes that includes the I-TevI, but not the I-BmoI, target sequence. Both the I-TevI and I-BmoI cleavage site requirements correspond to functionally critical residues involved in an extensive hydrogen bond network within the TS active site. Remarkably, these cleavage requirements correlate with TS phylogeny in bacteria, suggesting that each endonuclease has individually adapted to efficiently cleave distinct TS substrates.     

Activity, specificity and structure of I-Bth0305I: a representative of a new homing endonuclease family

Novel family of putative homing endonuclease genes was recently discovered during analyses of metagenomic and genomic sequence data. One such protein is encoded within a group I intron that resides in the recA gene of the Bacillus thuringiensis 03058-36 bacteriophage. Named I-Bth0305I, the endonuclease cleaves a DNA target in the uninterrupted recA gene at a position immediately adjacent to the intron insertion site. The enzyme displays a multidomain, homodimeric architecture and footprints a DNA region of ~60 bp. Its highest specificity corresponds to a 14-bp pseudopalindromic sequence that is directly centered across the DNA cleavage site. Unlike many homing endonucleases, the specificity profile of the enzyme is evenly distributed across much of its target site, such that few single base pair substitutions cause a significant decrease in cleavage activity. A crystal structure of its C-terminal domain confirms a nuclease fold that is homologous to very short patch repair (Vsr) endonucleases. The domain architecture and DNA recognition profile displayed by I-Bth0305I, which is the prototype of a homing lineage that we term the 'EDxHD' family, are distinct from previously characterized homing endonucleases.     

DNA substrate specificity and cleavage kinetics of an archaeal homing-type endonuclease from Pyrobaculum organotrophum.

The protein encoded by intron 1 of the single 23S rRNA gene of the archaeal hyperthermophile Pyrobaculum organotrophum was isolated and shown to constitute a homing-type DNA endonuclease, I-PorI. It cleaves the intron- 23S rDNA of the closely related organism Pyrobaculum islandicum near the site of intron insertion in Pb.organotrophum. In contrast, no endonuclease activity was detected for the protein product of intron 2 of the same gene of Pb.organotrophum which, like I-PorI, carries the LAGLI-DADG motif, common to group I intron-encoded homing enzymes. I-PorI cleaves optimally at 80 degrees C, with kcat and Km values of about 2 min-1 and 4 nM, respectively, and generates four nucleotide 3'-overhangs and 5'-phosphates. It can cleave a 25 base pair DNA fragment encompassing the intron insertion site. A mutation-selection study established the base pair specificity of the endonuclease within a 17 bp region, from positions -6 to +11 with respect to the intron-insertion site. Four of the essential base pairs encode the sequence involved in the intron-exon interaction in the pre-rRNA that is required for recognition by the RNA splicing enzymes. Properties of the enzyme are compared and contrasted with those of eucaryotic homing endonucleases.     

Organization and variation of the mitochondrial control region in two vulture species, Gypaetus barbatus and Neophron percnopterus

We report the first entire mitochondrial DNA (mtDNA) control region sequences in two endangered vulture species, the bearded vulture (Gypaetus barbatus) and the Egyptian vulture (Neophron percnopterus). Results showed that the general organization of vulture control regions was very similar to other birds, with three distinct domains: a left variable domain (DI), a central conserved one (DII) including the F, E, D, and C boxes, and a right domain (DIII) containing the CSB1 sequence. However, due to the presence of long tandem repeats, vulture control regions differed from other avian control regions both in size and nucleotide composition. The Egyptian vulture control region was found to be the largest sequenced so far (2031 bp), due to the simultaneous presence of repeats in both DI (80 bp) and DIII (77 bp). Low variation was found in vulture control regions, particularly in G. barbatus, as the probable result of populations declines in the last few centuries.