A novel method to perform genomic walks using a combination of single strand DNA circularization and rolling circle amplification

Characterization of regions flanking a known sequence within a genome, known as genome walking, is a cornerstone technique in modern genetic analysis. In the present work we have developed a new PCR-dependent, directional genome walking protocol based on the unique circularization property of a novel DNA ligase, CircLigase. In the first step, PCR based primer extension is performed using a phosphorylated primer, designed to extend from the boundary of the known sequence, into the flanking region. This linear amplification results in the generation of single-stranded (ss) DNA, which is then circularized using CircLigase. Using the hyperbranching activity of Phi29 DNA polymerase, the circular ssDNA is then linearized by rolling circle amplification, resulting in copious amounts of double stranded concatameric DNA. Nested primers are used to amplify the flanking sequence using inverse PCR. The products are resolved on an agarose gel and the bands whose mobility change due to the nested location of the primer combination used are identified, extracted, and cloned into a plasmid vector for sequencing. Empirical proof for this concept was generated on two antimicrobial biosynthetic genes in Pseudomonas sp. LBUM300. Using the hcnB and phlD genes as starting points, ca 1 kb of flanking sequences were successfully isolated. The use of locus specific primers ensured both directionality and specificity of the walks, alleviating the generation of spurious amplicons, typically observed in randomly primed walking protocols. The presented genome walking protocol could be applied to any microbial genome and requires only 100-150 bp of prior sequence information. The proposed methodology does not entail laborious testing of restriction enzymes or adaptor ligation. This is the first report of a successful application of the novel ligase enzyme, CircLigase for genomic walking purposes.     

Directional genome walking using PCR

We describe here a PCR-based "directional genome walking" protocol. The basic procedure for the amplification consists of two rounds of PCR. A primary PCR was performed, on the genomic DNA using a biotinylated primer specific to a known sequence in the genome along with four universal walker primers that were designed with partial degeneracy. The biotinylated primary PCR products were immobilized on streptavidin-linked paramagnetic beads. This step removed all nonspecific amplification products, and the purified template was used for the second PCR using a nested primer and the walker primer-2 to increase specificity. This technique is potentially useful for cloning promoter regions and has been successfully used to isolate 5'-flanking genomic regions of many cDNA clones previously isolated by us.     

蛋白质起始的DNA病毒复制机制

DNA聚合酶在DNA合成过程中需要的引物包括RNA引物、DNA自我引物和蛋白质引物3种类型。新DNA链(如冈崎片段)的复制多是在DNA模板上合成一段RNA引物,细小病毒利用其基因组末端的反向末端重复序列(ITRs)自我折叠成DNA引物,而一些DNA、RNA病毒及真菌质粒起始复制反应的引物则是蛋白质。以感染原核生物的噬菌体Phi29和真核DNA病毒腺病毒为例,从复制过程所涉及的蛋白质、对复制原点的识别、复制起始反应、新链的延伸、复制终止过程等方面详细阐述DNA病毒由蛋白质引发的复制机制,并对已商品化的Phi29 DNA聚合酶产品多重置换扩增及单细胞测序等的应用以及基于噬菌体Phi29蛋白质起始的最小复制系统体外扩增异源DNA等最新的应用研究作相关总结介绍。     

Development of a versatile cassette for directional genome walking using cassette ligation-mediated PCR and its application in the cloning of complete lipolytic genes from Bacillus species

Since the invention of the PCR technology, adaptation techniques to clone DNA fragments flanking the known sequence continue to be developed. We describe a perfectly annealed cassette available in almost unlimited quantities with variable sticky-and blunt-end restriction enzyme recognition sites for efficient restriction and ligation with the restricted target genomic DNA. The cassette provides a 200-bp sequence, which is used to design a variety of cassette-specific primers. The dephosphorylation prevents cassette self-ligation and creates a nick at the cassette: target genome DNA ligation site suppressing unspecific PCR amplifications. We introduce the single-strand amplification PCR (SSA-PCR) technique where a lone known locus-specific primer is firstly used to enrich the targeted template DNA strand resulting in significant PCR product specificity during the second round conventional nested PCR. The distance between the known locus-specific primer and the nearest location of the restriction enzyme used determined the length of the obtained PCR product. We used this technique to walk downstream into the isochorismatase and upstream into the hypothetical conserved genes flanking the mature extracellular lipase gene from Bacillus licheniformis. We further demonstrated the potential of the technique as a cost-effective method during PCR-based prospecting for novel genes by designing "universal" degenerate primers that detected homologues of Family VII bacterial lipolytic genes in Bacillus species. The cassette ligation-mediated PCR was used to clone complete nucleotide sequences encoding functional lipolytic genes from B. licheniformis and Bacillus pumilus.     

Exploring whole genome amplification as a DNA recovery tool for molecular genetic studies.

The whole genome amplification (WGA) protocol evaluated during this study, GenomiPhi DNA amplification kit, is a novel method that is not based on polymerase chain reaction but rather relies on the highly processive and high fidelity Phi29 DNA polymerase to replicate linear genomic DNA by multiple strand displacement amplification. As little as 1 ng of genomic DNA template is sufficient to produce microgram quantities of high molecular weight DNA. The question explored during this study is whether such a WGA method is appropriate to reliably replenish and even recover depleted DNA samples that can be used for downstream genetic analysis. A series of human DNA samples was tested in our laboratory and validated using such analytical methods as gene-specific polymerase chain reaction, direct sequencing, microsatellite marker analysis, and single nucleotide polymorphism allelic discrimination using TaqMan and Pyrosequencing chemistries. Although degraded genomic DNA is not a good template for Phi29 WGA, this method is a powerful tool to replenish depleted DNA stocks and to increase the amount of sample for which biological tissue availability is scarce. The testing performed during the validation phase of the study indicates no discernable difference between WGA samples and the original DNA templates. Thus, GenomiPhi WGA can be used to increase precious or depleted DNA stocks, thereby extending the life of a family-based linkage analysis project and increasing statistical power.     

A Whole Genome Amplification Method to Generate Long Fragments from Low Quantities of Genomic DNA

Several whole genome amplification strategies have been developed to preamplify the entire genome from minimal amounts of DNA for subsequent molecular genetic analysis. However, none of these techniques has proven to amplify long products from very low (nanogram or picogram) quantities of genomic DNA. Here we report a new whole genome amplification protocol using a degenerate primer (DOP-PCR) that generates products up to about 10 kb in length from less than 1 ng genomic template DNA. This new protocol (LL-DOP-PCR) allows in the subsequent PCR the specific amplification, with high fidelity, of DNA fragments that are more than 1 kb in length. LL-DOP-PCR provides significantly better coverage for microsatellites and unique sequences in comparison to a conventional DOP-PCR method.     

Cloning genomic sequences using long-range PCR

Protocols are presented for preparing DNA from a genomic library in λ phage and for synthesizing genomic fragments using PCR with nested vector- and gene-specific primers and linker-primers. Library DNA, isolated fromE. coli liquid lysates by a simple protocol, is used as template in PCR following a commercial protocol. The method produces library DNA sufficient for several hundred PCRs, incorporates nested primers to reduce nonspecific product formation, and enables the synthesis of linker-containing DNA fragments containing selected restriction sites to simplify subsequent cloning. The isolation of 5′ upstream sequences of three different arabidopsis genes by this methodod is described.     

Development of microsatellite markers from tartary buckwheat

A genomic library enriched with (gT)_n repeats from tartary buckwheat (Fagopyrum tataricum) was constructed using 5′-anchored PCR for the development of microsattellite markers. Sequencing analysis of 5 clones from the library showed that they all contained microsatellites (totally 10 loci), and each was unique. An additional locus-specific primer was designed according to flanking sequence. Two of the microsatellite loci of 10 tartary buckwheat varieties were amplified using an anchored primer and a locus-specific primer, which revealed a clear polymorphic pattern. The data confirmed that the degenerate primer was reliably anchoring at the 5′-end of the microsatellite, and the primers developed based on this technology could be used for diversity analysis of tartary buckwheat.     

Synthesis of universal unmethylated control DNA by nested whole genome amplification with phi29 DNA polymerase

Optimization of highly sensitive methods to detect methylation of CpG islands in gene promoter regions requires adequate methylated and unmethylated control DNA. Whereas universal methylated control DNA is available, universal unmethylated control (UUC) DNA has not been made because demethylase is not available to remove methyl groups from all methylated cytosines. On the basis that DNA synthesized by DNA polymerase does not contain methylated cytosines, we developed a method to create UUC DNA by nested whole genome amplification (WGA) with phi29 DNA polymerase. Contamination of the template genomic DNA in UUC was only 3.1 x 10(-7), below the detection limit of sensitive methods used for methylation studies such as methylation-specific PCR. Assessment of microsatellite markers demonstrated that even nested phi29 WGA achieves highly accurate and homogeneous amplification with very low amounts of genomic DNA as an initial template. The UUC DNA created by nested phi29 WGA is practically very useful for methylation analysis.     

Application of Phi29 DNA polymerase mediated whole genome amplification on single spores of arbuscular mycorrhizal (AM) fungi

Genetic analysis of arbuscular mycorrhizal (AM) fungi relies on analysis of single spores. The low DNA content makes it difficult to perform large scale molecular analysis. We present the application of Phi29 DNA polymerase mediated strand displacement amplification (SDA) to genomic DNA extracted from single spores of Glomus and Gigaspora species to address this problem. The genome coverage of the SDA process was evaluated by PCR amplification of the beta-tubulin1 gene and part of the rDNA cluster present in AM fungi. The fidelity of SDA was evaluated further by sequencing the Glomus intraradices ITS1 variants to detect the four ITS1 variants previously identified for this fungus.     

Template-blocking PCR: An advanced PCR technique for genome walking

This article describes the development of an improved method for the isolation of genomic fragments adjacent to a known DNA sequence based on a cassette ligation-mediated polymerase chain reaction (PCR) technique. To reduce the nonspecific amplification of PCR-based genome walking, the 3′ ends of the restriction enzyme-digested genomic DNA fragments were blocked with dideoxynucleoside triphosphate (ddNTP) and ligated with properly designed cassettes. The modified genomic DNA fragments flanked with cassettes were used as a template for the amplification of a target gene with a gene-specific primer (GSP) and a cassette primer (CP). The ddNTP blocking of the genomic DNA ends significantly reduced the nonspecific amplification and resulted in a simple and rapid walking along the genome. The efficiency of the template-blocking PCR method was confirmed by a carefully designed control experiment. The method was successfully applied for the cloning of the PGK1 promoter from Pichia ciferrii and two novel cellulase genes from Penicillium sp.     

In-gel multiple displacement amplification of long DNA fragments diluted to the single molecule level

The isolation and multiple genotyping of long individual DNA fragments are needed to obtain haplotype information for diploid organisms. Limiting dilution of sample DNA followed by multiple displacement amplification is a useful technique but is restricted to short (<5 kb) DNA fragments. In the current study, a novel modification was applied to overcome these problems. A limited amount of cellular DNA was carefully released from intact cells into a mildly heated alkaline agarose solution and mixed thoroughly. The solution was then gently aliquoted and allowed to solidify while maintaining the integrity of the diluted DNA. Exogenously provided Phi29 DNA polymerase was used to perform consistent genomic amplification with random hexameric oligonucleotides within the agarose gels. Simple heat melting of the gel allowed recovery of the amplified materials in a solution of the polymerase chain reaction (PCR)-ready form. The haplotypes of seven SNPs spanning 240 kb of the DNA surrounding the human ATM gene region on chromosome 11 were determined for 10 individuals, demonstrating the feasibility of this new method.     

Supported PCR: an efficient procedure to amplify sequences flanking a known DNA segment

We describe a novel modification of the polymerase chain reaction for efficient in vitro amplification of genomic DNA sequences flanking short stretches of known sequence. The technique utilizes a target enrichment step, based on the selective isolation of biotinylated fragments from the bulk of genomic DNA on streptavidin-containing support. Subsequently, following ligation with a second universal linker primer, the selected fragments can be amplified to amounts suitable for further molecular studies. The procedure has been applied to recover T-DNA flanking sequences in transgenic tomato plants which could subsequently be used to assign the positions of T-DNA to the molecular map of tomato. The method called supported PCR (sPCR) is a simple and efficient alternative to techniques used in the isolation of specific sequences flanking a known DNA segment.     

Partially Overlapping Primer-Based PCR for Genome Walking

Current genome walking methods are cumbersome to perform and can result in non-specific products. Here, we demonstrate the use of partially overlapping primer-based PCR (POP-PCR), a direct genome walking technique for the isolation of unknown flanking regions. This method exploits the partially overlapping characteristic at the 3’ ends of a set of POP primers (walking primers), which guarantees that the POP primer only anneals to the POP site of the preceding PCR product at relatively low temperatures. POP primer adaptation priming at the genomic DNA/POP site occurs only once due to one low-/reduced-stringency cycle in each nested PCR, resulting in the synthesis of a pool of single-stranded DNA molecules. Of this pool, the target single-stranded DNA is replicated to the double-stranded form bound by the specific primer and the POP primer in the subsequent high-stringency cycle due to the presence of the specific primer-binding site. The non-target single stranded DNA does not become double stranded due to the absence of a binding site for any of the primers. Therefore, the POP-PCR enriches target DNA while suppressing non-target products. We successfully used POP-PCR to retrieve flanking regions bordering the gadA locus in Lactobacillus brevis NCL912, malQ in Pichia pastoris GS115, the human aldolase A gene, and hyg in rice.     

Specific single-cell isolation and genomic amplification of uncultured microorganisms

We in this study describe a new method for genomic studies of individual uncultured prokaryotic organisms, which was used for the isolation and partial genome sequencing of a soil archaeon. The diversity of Archaea in a soil sample was mapped by generating a clone library using group-specific primers in combination with a terminal restriction fragment length polymorphism profile. Intact cells were extracted from the environmental sample, and fluorescent in situ hybridization probing with Cy3-labeled probes designed from the clone library was subsequently used to detect the organisms of interest. Single cells with a bright fluorescent signal were isolated using a micromanipulator and the genome of the single isolated cells served as a template for multiple displacement amplification (MDA) using the Phi29 DNA polymerase. The generated MDA product was afterwards used for 16S rRNA gene sequence analysis and shotgun-cloned for additional genomic analysis. Sequence analysis showed >99% 16S rRNA gene homology to soil crenarchaeotal clone SCA1170 and shotgun fragments had the closest match to a crenarchaeotal BAC clone previously retrieved from a soil sample. The system was validated using Methanothermobacter thermoautotrophicus as single-cell test organism, and the validation setup produced 100% sequence homology to the ten tested regions of the genome of this organism.     

A Rapid Isolation of the Unknown 5′-Flanking Sequence of Human CENP-B cDNA with Polymerase Chain Reactions

We rapidly and efficiently isolated the 5′-region of cDNA encoding the N-terminal region of human centromere antigen B (CENP-B) including an ATG methionine codon by polymerase chain reactions (PCR). The unknown 5′-flanking sequence of the cDNA was amplified using an adaptor-sequence ligated to the 5′ end as a universal primer sequence. To locate the target fragments, we did an additional PCR with another set of two internal primers using samples of the size-fractionated products as templates, rather than using the conventional hybridization procedure. This approach can further be applied to the analysis of other unknown flanking sequences of cDNA or genomic DNA.     

Features of DNA fragments obtained by random amplified polymorphic DNA (RAPD) assays

Random amplified polymorphic DNA (RAPD) fragments were prepared from samples of Calonectris diomedea (Cory's shearwater, Aves) and Haemonchus contortus (Nematoda) DNA by polymerase chain reaction (PCR) using decamers containing two restriction enzyme sites as primers. Six of 19 studied RAPD fragments probably originated from traces of commensal microorganisms. Many rearranged fragments, absent in the original genomic DNA, were synthesized and amplified during the processing of all the DNA samples, indicating that interactions occur within and between strands during the annealing step of PCR. The model of interactions between molecular species during DNA amplification with a single arbitrary oligonucleotide primer was modified to include nested primer annealing and interactions within and between strands. The presence of these artefacts in the final RAPD have a major effect on the interpretation of polymorphism studies.     

Duality of polynucleotide substrates for Phi29 DNA polymerase: 3'-->5' RNase activity of the enzyme

Phi29 DNA polymerase is a small DNA-dependent DNA polymerase that belongs to eukaryotic B-type DNA polymerases. Despite the small size, the polymerase is a multifunctional proofreading-proficient enzyme. It catalyzes two synthetic reactions (polymerization and deoxynucleotidylation of Phi29 terminal protein) and possesses two degradative activities (pyrophosphorolytic and 3'-->5' DNA exonucleolytic activities). Here we report that Phi29 DNA polymerase exonucleolyticaly degrades ssRNA. The RNase activity acts in a 3' to 5' polarity. Alanine replacements in conserved exonucleolytic site (D12A/D66A) inactivated RNase activity of the enzyme, suggesting that a single active site is responsible for cleavage of both substrates: DNA and RNA. However, the efficiency of RNA hydrolysis is approximately 10-fold lower than for DNA. Phi29 DNA polymerase is widely used in rolling circle amplification (RCA) experiments. We demonstrate that exoribonuclease activity of the enzyme can be used for the target RNA conversion into a primer for RCA, thus expanding application potential of this multifunctional enzyme and opening new opportunities for RNA detection.     

Novel application of Phi29 DNA polymerase: RNA detection and analysis in vitro and in situ by target RNA-primed RCA

We present a novel Phi29 DNA polymerase application in RCA-based target RNA detection and analysis. The 3′→5′ RNase activity of Phi29 DNA polymerase converts target RNA into a primer and the polymerase uses this newly generated primer for RCA initiation. Therefore, using target RNA-primed RCA, padlock probes may be targeted to inner RNA sequences and their peculiarities can be analyzed directly. We demonstrate that the exoribonucleolytic activity of Phi29 DNA polymerase can be successfully applied in vitro and in situ. These findings expand the potential for detection and analysis of RNA sequences distanced from 3′-end.     

MARA: a novel approach for highly multiplexed locus-specific SNP genotyping using high-density DNA oligonucleotide arrays

We have developed a locus-specific DNA target preparation method for highly multiplexed single nucleotide polymorphism (SNP) genotyping called MARA (Multiplexed Anchored Runoff Amplification). The approach uses a single primer per SNP in conjunction with restriction enzyme digested, adapter-ligated human genomic DNA. Each primer is composed of common sequence at the 5′ end followed by locus-specific sequence at the 3′ end. Following a primary reaction in which locus-specific products are generated, a secondary universal amplification is carried out using a generic primer pair corresponding to the oligonucleotide and genomic DNA adapter sequences. Allele discrimination is achieved by hybridization to high-density DNA oligonucleotide arrays. Initial multiplex reactions containing either 250 primers or 750 primers across nine DNA samples demonstrated an average sample call rate of ~95% for 250- and 750-plex MARA. We have also evaluated >1000- and 4000-primer plex MARA to genotype SNPs from human chromosome 21. We have identified a subset of SNPs corresponding to a primer conversion rate of ~75%, which show an average call rate over 95% and concordance >99% across seven DNA samples. Thus, MARA may potentially improve the throughput of SNP genotyping when coupled with allele discrimination on high-density arrays by allowing levels of multiplexing during target generation that far exceed the capacity of traditional multiplex PCR.