Bench-scale and packed bed sorption of methylene blue using treated olive pomace and charcoal

A combination of olive pomace after solvent extraction and charcoal produced from the solid waste of olive oil press industry was used as an adsorbent for the removal of methylene blue (MB) dye from aqueous solutions. Batch tests showed that up to 80% of dye was removed when the dye concentration was 10 mg/ml and the sorbent concentration was 45 mg/ml. An increase in the olive pomace concentration resulted in greater dye removal from aqueous solution, and an increase in MB dye concentration at constant adsorbent concentration increased the dye loading per unit weigh of adsorbent. In the kinetic of the adsorbent process, the adsorption data followed the second-order kinetic model better than first order kinetic model. Charcoal showed higher sorption capacity (uptake) than that of olive pomace. In the fixed bed adsorption experiment, the breakthrough curves showed constant pattern behavior, typical of favorable isotherms. The breakthrough time increased with increasing bed height, decreasing flow rate and decreasing influent concentration and methylene blue dye uptake. The uptake of MB dye was significantly increased when a mixture of olive pomace and charcoal was packed in the column in a multi-layer fashion. Different models were used to describe the behavior of this packed-sorption process.     

Removal of methylene blue dye from aqueous solutions by adsorption using yellow passion fruit peel as adsorbent

The removal of color from aquatic systems caused by presence of synthetic dyes is extremely important from the environmental viewpoint because most of these dyes are toxic, mutagenic and carcinogenic. In this present study, the yellow passion fruit (Passiflora edulis Sims. f. flavicarpa Degener) peel a powdered solid waste, was tested as an alternative low-cost adsorbent for the removal of a basic dye, methylene blue (MB), from aqueous solutions. Adsorption of MB onto this natural adsorbent was studied by batch adsorption isotherms at room temperature. The effects of shaking time and pH on adsorption capacity were studied. An alkaline pH was favorable for the adsorption of MB. The contact time required to obtain the maximum adsorption was 56 h at 25 degrees C. Yellow passion fruit peel may be used as an alternative adsorbent to remove MB from aqueous solutions.     

Interface interactions between insecticide carbofuran and tea waste biochars produced at different pyrolysis temperatures

Biochars showed a potential as adsorbents for organic contaminants, however, have not been tested for carbofuran, which has been detected frequently in water. This study provides evidences for the use of infused tea residue derived biochar for carbofuran removal. Biochars were produced at 300, 500 and 700 °C by slow pyrolysis and were characterized by proximate and ultimate analysis, FT-IR, SEM, BET and pore size distribution. Pyrolysis temperature showed a pronounced effect on biochar properties. The maximum carbofuran removal was achieved at pH 5. Freundlich and Temkin models best fit the equilibrium data. Biochars produced at 700 °C showed the highest sorption intensity. The adsorption process was likely to be a favorable chemisorption process with electrostatic interactions between carbofuran molecules and biochar surface. Acid-base interactions, electrophilic addition reactions and amide bond formations are the possible mechanisms of carbofuran adsorption. Overall, biochars prepared from tea waste can be utilized as effective adsorbents for removal of aqueous carbofuran.     

Effect of water extraction on sugars recovery from steam exploded olive tree pruning

Biomass of olive tree pruning can be considered a suitable raw material for the production of ethanol due to its high content of potentially fermentable carbohydrates. However its high extractives content could cause condensation reactions between extractives and acid insoluble lignin during pretreatment, hindering the enzymatic hydrolysis of pretreated material. In this work, the effect of extractives removal before steam explosion of olive tree pruning was evaluated. The objectives are to recover as much glucose as possible in the extraction stage and to avoid the condensation reactions. The effect of temperature and time of water extracted material on sugars recovery was studied using a response surface method according to a central composite design. Extractive removal previous to steam explosion resulted in 20% more total sugars recovery in comparison to a material without water extraction stage.     

Dynamics of pruning waste and spent horse litter co-composting as determined by chemical parameters

Co-composting of pruning waste and horse manure was monitored by different parameters. A windrow composting pile, having the dimensions 2.5m (height) x 30m (length) was established. The maturation of pruning waste and horse manure compost was accompanied by a decline in NH(4)(+)-N concentration, water soluble C and an increase in NO(3)(-)-N content. Organic matter (OM) content during composting followed a first-order kinetic equation. This result was in agreement with the microbiological activity measured by the CO(2) respiration during the process. The correlation at a high level of probability found between the OM loss and CO(2) evolution showed that both parameters could be used to indicate the degree of OM degradation that is the maturity and stability phases of the compost studied. Humification parameters data from the organic matter fractionation did not show a clear tendency during the composting time, suggesting that these parameters are not suitable for evaluating the dynamics of the process.     

Adsorption of methylene blue using green pea peels (Pisum sativum): A cost-effective option for dye-based wastewater treatment

Methylene blue (MB), a common toxic dye, is largely discharged from dyeing processes for acrylic, nylon, silk, and woolen fabrics in textile industries. While application of conventional removal processes like chemical precipitation, ion exchange, commercial activated carbon adsorption, etc often become cost-prohibitive, the adsorption of MB by abundantly available green pea peel (GPP: Pisum sativum) derived and acid-treated carbon (GPP-AC) has proved to be a cost-attractive option in the present study. The physicochemical and morphological characteristics of GPP-AC were examined with the help of XRD, BET surface area, SEM, and Fourier transform infrared spectrophotometry ((FT-IR) analysis. The influences of such adsorption parameters as initial dye concentration, pH, contact time, adsorbent dosage, agitation speed, particle size, and temperature were evaluated and optimized. The equilibrium contact time for maximum adsorption of MB on to GPPAC was found to be 7 h. The equilibrium data of the adsorption process were modeled by using the Langmuir, Freundlich, Temkin, and Dubinin-Raduskevich (D-R) isotherms. However, the adsorption equilibrium data were best described by the Langmuir Isotherm model, with a maximum adsorption capacity of 163.94 mg MB/g GPPAC at 30°C.     

Degradation of diesel oil in soil using a food waste composting process

We investigated the simultaneous degradation of diesel oil in soil and the organic matter in food waste by composting in 8 l reactors. Using a 0.5 l/min air flow rate, and 0.5-1% diesel oil concentrations together with 20% food waste, high composting temperatures (above 60°C) were attained due to the efficient degradation of the food waste. Petroleum hydrocarbons were degraded by 80% after only 15 days composting in the presence of food waste. In a 28 l reactor scale-up experiment using 1% oil, 20% food waste and 79% soil, removal efficiencies of petroleum hydrocarbons and food waste after 15 days were 79% and 77%, respectively.     

Activated carbon from olive kernels in a two-stage process: industrial improvement

Activated carbons have been prepared from olive kernels and their adsorptive characteristics were investigated. A two stage process of pyrolysis-activation has been tested in two scales: (a) laboratory scale pyrolysis and chemical activation with KOH and (b) pilot/bench scale pyrolysis and physical activation with H(2)O-CO(2). In the second case, olive kernels were first pyrolysed at 800 degrees C, during 45 min under an inert atmosphere in an industrial pyrolyser with a throughput of 1t/h (Compact Power Ltd., Bristol, UK). The resulting chars were subsequently activated with steam and carbon dioxide mixtures at 970 degrees C in a batch pilot monohearth reactor at NESA facility (Louvain-la Neuve, Belgium). The active carbons obtained from both scales were characterized by N(2) adsorption at 77 K, methyl-blue adsorption (MB adsorption) at room temperature and SEM analysis. Surface area and MB adsorption were found to increase with the degree of burn-off. The maximum BET surface area was found to be around 1000-1200 m(2)/g for active carbons produced at industrial scale with physical activation, and 3049 m(2)/g for active carbons produced at laboratory with KOH activation. The pores of the produced carbons were composed of micropores at the early stages of activation and both micropores and mesopores at the late stages. Methylene blue removal capacity appeared to be comparable to that of commercial carbons and even higher at high degrees of activation.     

Methylene blue adsorption properties of mechanochemistry modified coal fly ash

In this study, the adsorption properties of Methylene blue (MB) on fly ash were investigated. By mechanochemistry modification, two different fly ashes, including raw fly ash and high-energy ball milled fly ash were selected for the adsorption experiment. The physical and morphology properties after the milling process were analyzed using mercury intrusion porosimetry, scanning electron micrograph, X-ray diffraction, and Fourier transform infrared spectroscopy. The results showed that the milling process modification will enhance the MB adsorption capacity of fly ash, with the value of adsorption capacity increasing from 5.06 to 7.97 mg g^?1. The adsorption can be well described by the pseudo-second-order rate model. The results of this study indicated that the milled fly ash has the potential to be an attractive material for dye removal from aqueous solution. Meanwhile, some pollutants in fly ash should be considered before application.     

Two-phase olive mill waste composting: enhancement of the composting rate and compost quality by grape stalks addition

Two-phase olive mill waste (TPOMW) is a semisolid sludge generated by the olive oil industry. Its recycling as a soil amendment, either unprocessed or composted, is being promoted as a beneficial agricultural practice in the Mediterranean area. One of the major difficulties when composting TPOMW is the compaction of the material due to its dough-like texture, which leads to an inadequate aeration. For this reason, the addition of bulking agents is particularly important to attain a proper composting process. In this study we followed the evolution of two composting mixtures (A and B) prepared by mixing equal amounts of TPOMW and sheep litter (SL) (in a dry weight basis). In pile B grape stalks (GS) were added (10% dry weight) as bulking agent to study their effect on the development of the composting process and the final compost quality. The incorporation of grape stalks to the composting mixture changed the organic matter (OM) degradation dynamics and notably reduced the total amount of lixiviates. The evolution of several maturation indices (C/N, germination index, water soluble carbon, humification indices, C/N in the leachates) showed a faster and improved composting process when GS were added. Moreover, chemical (NH₄ ⁺, NO₃ ⁻, cation exchange capacity, macro and micronutrients, heavy metals) and physical properties (bulk and real densities, air content, total water holding capacity, porosity) of the final composts were analysed and confirmed the superior quality of the compost where GS were added.     

Chemical and physical properties of pruning waste compost and their seasonal variability

Selected chemical and physical properties of 12 different pruning waste compost (PWC) samples were evaluated to assess their suitability as substrates for ornamental plants. Samples were taken periodically from the same composting facility over 18 months in order to determine if there was any seasonal variability. In addition to the PWC samples, a Canadian Sphagnum peat and a commercial growing medium (CGM) were used as standard materials. With respect to PWC properties, pH values were above 8, significantly higher than the pH of peat and the commercial substrate. All samples showed adequate levels of organic matter and correspondingly high cation-exchange capacity (CEC) values. The C/N ratio varied between 22 and 48, significantly higher than the optimal values of 15-20. Although composts were sampled from piles established in different seasons, no significant differences were found in their chemical properties. However, water retention characteristics were affected by seasonal changes in components entering the facility. Comparing the properties of PWC to those of peat and commercial growing medium, this material appears to be an acceptable component of a substrate for container-grown ornamental plants.     

Synthesis and characterization of magnetic β-cyclodextrin-chitosan nanoparticles as nano-adsorbents for removal of methyl blue

A novel nano-adsorbent, β-cyclodextrin-chitosan (CDC) modified Fe(3)O(4) nanoparticles (CDCM) is fabricated for removal of methyl blue (MB) from aqueous solution by grafting CDC onto the magnetite surface. The characteristics results of FTIR, SEM and XRD show that CDC is grafted onto Fe(3)O(4) nanoparticles. The grafted CDC on the Fe(3)O(4) nanoparticles contributes to an enhancement of the adsorption capacity because of the strong abilities of CDCM, which includes the multiple hydroxyl, carboxyl groups, amino groups and the formation of an inclusion complex due to the β-CD molecules through host-guest interactions, to adsorb MB. The adsorption of MB onto CDCM is found to be dependent on pH and temperature. Adsorption equilibrium is achieved in 50 min and the adsorption kinetics of MB is found to follow a pseudo-second-order kinetic model. Equilibrium data for MB adsorption are fitted well by Langmuir isotherm model. The maximum adsorption capacity for MB is estimated to be 2.78 g/g at 30°C. The CDCM was stable and easily recovered. Moreover the adsorption capacity was about 90% of the initial saturation adsorption capacity after being used four times.     

Low soil temperatures induce water deficits in olive (Olea europaea) trees

Olive trees are often subjected to low temperatures during winter. To quantify the effects of low temperatures on the water relations of olive trees, we studied the responses to low soil temperatures on winter days of variable evaporative demand (ET₀) in 1-year-old potted olive (Oleo europaea L. cv. Picual) trees in 1996 and 1997. Low night (2.5 and 5.2°C) but ambient day soil temperatures (above 10°C) did not affect stomatal conductance (g_s), leaf (Ψ_leaf) and stem (Ψ_stem) water potentials. Soil temperature levels inducing water stress in olive trees were determined for winter days with ET₀ typical for southern Spain (ET₀= 1.5 ± 0.3 mm day^?1). Leaf and stem water potential decreased and root hydraulic resistance (r_root) increased when trees were exposed to night and day soil temperatures below 10°C. Stomatal conductance was not affected at soil temperatures between 6.4 and 10°C, but decreased at temperatures below 6.4°C. The soil temperature levels affecting the water uptake of olive trees remained relatively constant over the range of ET₀ of 1-2 mm day^?1 during winter and early spring months. However, the soil temperature influencing gs appeared to be more variable and was affected by ET₀. Olive tree recovery from low soil temperature stress depended on stress duration and severity and interacted with ET₀. Recovery of ψ started already during the stress period, probably induced by stomatal closure and high r_root, thus allowing tree rehydration overnight. Root hydraulic resistance contributed the major part of whole-tree hydraulic resistance in response to cold stress, accounting for 76 and 89% at 6.4 and 4.6°C, respectively; which indicates that r_root is the primary control of the water status in olive trees under low temperatures.     

Effects of moisture content and initial pH in composting process on heavy metal removal characteristics of grass clipping compost used for stormwater filtration

Heavy metals are common contaminants in stormwater runoff. One of the devices that can be used to effectively and economically remove heavy metals from runoff is a yard waste compost stormwater filter. The primary goal of composting is to reduce waste volume rather than to produce stormwater filter media. Moisture content (MC) and initial pH, the two important parameters in composting, were studied for their effects on yard waste volume reduction and heavy metal adsorption performances of the compost. The main objective of this investigation was to examine whether the conditions that provided high yard waste volume reduction would also result in compost with good heavy metal removal performances. Manila grass was composted at different initial pHs (5–9) and MCs (30–70%) and the composts were used to adsorb cadmium, copper, lead and zinc from water. Results indicated that MC is more critical than initial pH for both volume reduction and production of compost with high metal adsorption performances. The most optimal conditions for the two attributes were not exactly the same but lower MCs of 30–40% and pH 7 or higher tended to satisfy both high volume reduction and effective metal adsorption.     

Variation in microbial population during composting of agro-industrial waste

Two compost piles were prepared, using two ventilation systems: forced ventilation and ventilation through mechanical turning. The material to compost was a mixture of orange waste, olive pomace, and grass clippings (2:1:1 v/v). During the composting period (375 days), samples were periodically taken from both piles, and the enumeration of fungi, actinomycetes, and heterotrophic bacteria was carried out. All studied microorganisms were incubated at 25 and 55 °C after inoculation in appropriate growth media. Fungi were dominant in the early stages of both composting processes; heterotrophic bacteria proliferated mainly during the thermophilic stage, and actinomycetes were more abundant in the final stage of the composting process. Our results showed that the physical and chemical parameters: temperature, pH, moisture, and aeration influenced the variation of the microbial population along the composting process. This study demonstrated that composting of these types of wastes, despite the prolonged mesophilic stage, provided an expected microbial variation.     

Efforts to Explain and Control the Prolonged Thermophilic Period in Two-phase Olive Oil Mill Sludge Composting

The aim of this paper was to evaluate the use of different bulking agents in different ratios as a means to control, optimise and eventually reduce the duration of the thermophilic period in two-phase olive oil mill sludge (OOMS) composting. The bulking agents used were: (i) olive tree leaves (OTL), (ii) olive tree shredded branches (OTB) and (iii) woodchips (WDC). The selection of these materials was based on their abundance and availability on the island of Crete, the southernmost point of Greece. The ratios studied were: Pile 1, OOMS:OTL in 1:1 v/v; Pile 2, OOMS:WDC in 1:1.5 v/v; Pile 3, OOMS:OTL in 1:2 v/v; Pile 4, OOMS:OTL:OTB in 1:1:1 v/v; and Pile 5, OOMS:OTL:OTB in 1:1:2 v/v. The composting system used was that of windrows with the volume of each pile approximately 20–25 m³. The experiments took place over two consecutive years. A composting turner was used and turnings were performed at one and two week intervals. In each pile a variety of physiochemical parameters were monitored. Temperature remained high in all five trials. Piles 1, 2, 3, 4 and 5 temperatures recorded values of above 50 °C for 106, 158, 160, 175 and 183 days, respectively. Volumes were reduced by approximately 67%, 62%, 63%, 80% and 84%, respectively. Temperature remained high, mainly due to the presence in large amounts of oily substances which during their complete oxidation release important amounts of energy and aid the cometabolism of more stable molecules such as lignin. This process is better described as the slow “burning” of a “fuel” mixture in an “engine” than composting. This approach is based on the extensive similarities of this process to that of crude oil sludge or similar waste composting.     

Validation of thermal composting process using olive mill solid waste for industrial scale cultivation of Agaricus bisporus

The production of a substrate containing destoned olive mill solid waste for the cultivation of Agaricus bisporus (Lange) Imbach on an industrial scale was studied. A standard mushroom compost (C) mainly made from straw and poultry manure was compared with the experimental compost (EC) containing the same ingredients as (C) but with added olive mill solid waste (10.6% w/w). Microbial indicators such as counts of heterotrophic microbes and actinomycetes were higher in EC than in C. In addition, compost selectivity as indicated by higher mushroom yield and biological efficiency of EC was higher than that of C. Market quality of the mushrooms produced in both C and EC were comparable. These findings support our work that olive mill solid waste can be used safely in thermal composting process to produce a selective substrate for industrial-scale cultivation of A. bisporus. This study also demonstrates an environmentally sustainable system to manage solid waste from olive oil extraction processes thus overcoming environmental pollution brought about by irrational disposal of the waste on farm lands.