Effects of Sewage Sludge Application on Biomass Production and Concentrations of Cd,Pb and Zn in Shoots of <Emphasis Type="Italic">Salix</Emphasis> and <Emphasis Type="Italic">Populus</Emphasis> Clones: Improvement of Phytoremediation Efficiency in Contaminated Soils

Fast-growing clones of Salix and Populus species have been studied for phytoremediation of soils contaminated by risk elements (REs) using short-rotation coppice plantations. Biomass yield, accumulation and removal of RE (Cd, Pb and Zn) by highly productive willow (S1—(Salix schwerinii × Salix viminalis) × S. viminalis, S2—Salix × smithiana) and poplar (P1—Populus maximowiczii × Populus nigra, P2—P. nigra) clones were investigated with and without sewage sludge (SS) application. The precise field experiment was established in April 2008 on moderately Cd-, Pb- and Zn-contaminated soil. Initially, shoots were harvested after four seasons in February 2012 and then after two more seasons in February 2014. The application of SS limited plant growth during the first years of the experiment in the majority of treatments, mainly due to weed competition and higher concentrations of available soil nutrients causing lower yields than those of control (C) treatments. Well-developed roots were able to take advantage of SS applications, and shoot yield was mainly higher in SS treatments in the second harvest, reaching up to 15 t dry matter (DM)?ha^?1. Willows performed better than poplars. Application of SS reduced RE shoot concentrations compared to the C treatment. The removal of RE was significantly higher in the second harvest for all clones and elements (except the P2 clone), and the biomass yield was the major driving force for the amount of RE removed by shoots. Well-developed plantations of fast-growing trees showed better suitability for the phytoextraction of moderately contaminated soils for Cd and partly for Zn but not for Pb, which was less available to plants. From the four tested clones, S2 showed the best removal of Cd (up to 0.94 %) and Zn (up to 0.34 %) of the total soil element content, respectively, and this clone is a good candidate for phytoextraction. SS can be a suitable source of nutrients for Salix clones without any threat to the food chain in terms of biomass contamination, but its application to the soil can result in an increased incidence of some weeds during the first years of plantation.     

Phytoextraction of Risk Elements by Willow and Poplar Trees

To characterize the phytoextraction efficiency of two clones of willow trees (Salix x smithiana Willd., Salix rubens) and two clones of poplar trees (Populus nigra x maximowiczii, Populus nigra Wolterson) were planted in contaminated soil (0.4–2.0 mg Cd.kg^?1, 78–313 mg Zn.kg^?1, 21.3–118 mg Cu.kg^?1). Field experiment was carried out in Czech Republic. The study investigated their ability to accumulate heavy metals (Cd, Zn, and Cu) in harvestable plant parts. The poplars produced higher amount of biomass than willows. Both Salix clones accumulated higher amount of Cd, Zn and Cu in their biomass (maximum 6.8 mg Cd.kg^?1, 909 mg Zn.kg^?1, and 17.7 mg Cu.kg^?1) compared to Populus clones (maximum 2.06 mg Cd.kg^?1, 463 mg Zn.kg^?1, and 11.8 mg Cu.kg^?1). There were no significant differences between clones of individual species. BCs for Cd and Zn were greater than 1 (the highest in willow leaves). BCs values of Cu were very low. These results indicate that Salix is more suitable plant for phytoextraction of Cd and Zn than Populus. The Cu phytoextraction potential of Salix and Populus trees was not confirmed in this experiment due to low soil availability of this element.     

Evaluation of Populus and Salix continuously irrigated with landfill leachate I. Genotype-specific elemental phytoremediation

There is a need for the identification and selection of specific tree genotypes that can sequester elements from contaminated soils, with elevated rates of uptake. We irrigated Populus (DN17, DN182, DN34, NM2, NM6) and Salix (94003, 94012, S287, S566, SX61) genotypes planted in large soil-filled containers with landfill leachate or municipal water and tested for differences in inorganic element concentrations (P, K, Ca, Mg, S, Zn, B, Mn, Fe, Cu, Al, Na, and Cl) in the leaves, stems, and roots. Trees were irrigated with leachate or water during the final 12 wk of the 18-wk study. Genotype-specific uptake existed. For genera, tissue concentrations exhibited four responses. First, Populus had the greatest uptake of P, K, S, Cu, and Cl. Second, Salix exhibited the greatest uptake of Zn, B, Fe, and Al. Third, Salix had greater concentrations of Ca and Mg in leaves, while Populus had greater concentrations in stems and roots. Fourth, Populus had greater concentrations of Mn and Na in leaves and stems, while Salix had greater concentrations in roots. Populus deltoides x P. nigra clones exhibited better overall phytoremediation than the P. nigra x P. maximowiczii genotypes tested. Phytoremediation for S. purpurea clones 94003 and 94012 was generally less than for other Salix genotypes. Overall, concentrations of elements in the leaves, stems, and roots corroborated those in the plant-sciences literature. Uptake was dependent upon the specific genotype for most elements. Our results corroborated the need for further testing and selecting of specific clones for various phytoremediation needs, while providing a baseline for future researchers developing additional studies and resource managers conducting on-site remediation.     

Host–pathogen relationship between Salix and Melampsora sheds light on the parentage of some biomass willows

The association between willow ( Salix ) and rust ( Melampsora ) is highly specific. Willows named Salix burjatica , S. dasyclados ( S. × dasyclados ) and S. × calodendron are important in renewable-energy plantations in the UK and western Europe. There has been much controversy over their origin, species status and nomenclature. It has been suggested that they have originated from hybridization between. S. caprea , S. viminalis and S. cinerea . In the present work, 59 willow clones were investigated through morphological examination and detached leaf inoculation using willow differentials, for their association, in southwest England, with M. capraearum and three pathotypes of Melampsora epitea (Me-A, B and C). M. capraearum was found on all clones of S. caprea and its hybrids with S. aurita ; Me-A on all S. viminalis clones; Me-B on wild S. cinerea , S. × calodendron , S. × dasyclados 'De Biardii 445' and S . 'Spaethii'; Me-C on all S. burjatica clones and most S. × dasyclados clones. Both M. caprearum and Me-A infected all S. × sericans ( S. caprea × viminalis ) clones and S. × dasyclados 'LA041/03'. We suggest that S. × dasyclados 'LA041/03' should be treated as S. × sericans ( S. caprea × S. viminalis ); S. burjatica , S. dasyclados and S. × dasyclados as synonyms; S. × dasyclados 'De Biardii 445' as S. × calodendron 'De Biardii 445'; and S . 'Spaethii' as S. × calodendron 'Spaethii'.     

北京东灵山地区主要树生地衣调查初报

首次对北京森林生态定位站所在地东灵山小龙门林场主要森林树种上的地衣进行了调查研究,辽东栎,核桃楸,山杨,黄花柳,白腊和春榆等树种上的地衣覆盖度较大,其覆盖度多为３０％￣６０％,最高可达８０％。     

Biomass Harvest from Natural Willow Rings around Prairie Wetlands

The study followed the harvest of natural willow from three wetlands using a prototype modified agricultural round baler nicknamed a Bio-Baler. The study reports fuel characteristics and combustion testing of biomass harvested from natural willow rings. Composition of native willow species in the harvested willow rings was determined. We specifically measured regrowth of the biomass and number of regenerated stems per stump 1 year after harvest to determine how different willow species responded to mechanical biomass cutting with the Bio-Baler. The results of combustion testing for the natural willow were essentially similar to those with “conventional” wood chips or planted willows. The ash content was approximately 1.65%, slightly lower than for planted willow plantations. The calorific value of the natural willow was 19.6 MJ kg^?1 (dry basis) similar to what is expected for wood and planted willow. Four Salix species (Salix bebbiana Sarg., Salix petiolaris Sm., Salix eriocephala Michx., and Salix discolor Muhl) were identified in the willow rings. Stem biomass increased for all species except S. bebbiana after willow was harvested with the Bio-Baler. Overall, willow regeneration was not affected by mechanical harvesting compared to hand cutting. Regenerated stem density was 93 stems per square meter for mechanically harvested stumps compared to 105 stems per square meter for hand-pruned stumps. Based on the results, biomass harvested from natural willow rings has acceptable fuel characteristics when compared to purpose-grown willows and mechanical harvest with a Bio-Baler does not have a negative effect on willow regeneration.     

Development of a hydroponic screening technique to assess heavy metal resistance in willow (Salix)

A nutrient thin film hydroponic system has been developed which allows rapid screening of willow (Salix) clones for their resistance to heavy metals, and hence their use in phytoremediation. Two clones known to be different in their resistance to heavy metals (Salix burjatica (Germany) and S. triandra x viminalis (Q83)), could be distinguished on the basis of leaf biomass, root biomass and stem height after 6 weeks. There were also differences in the uptake of heavy metals between the two clones.     

A feasibility study of a Salix viminalis gravel hydroponic system to renovate primary settled wastewater

A Salix viminalis/gravel system based on hydroponics was developed for wastewater renovation in order to avoid the problems of soil damage and pollution associated with long-term application of wastewater to soil. For such a system to work the mineral elements applied must match closely the requirements of the tree species. To examine this the growth and nutrient uptake of S. viminalis in wastewater was compared with that in Long Ashton nutrient solution (1/4 strength). S. viminalis grew more slowly in wastewater than in Long Ashton solution, but exhibited no obvious deficiency or toxicity symptoms. Since industrial wastewaters often contain metals, the extent to which copper might inhibit wastewater treatment in this system was also examined. S. viminalis was grown in wastewater amended with 10 and 100 ppm copper. Trees were unaffected by wastewater with 10 ppm copper when compared to trees grown in wastewater alone. Wastewater containing with 100 ppm copper was too toxic for the trees to thrive and wastewater treatment was reduced. Treatment efficiencies for unamended wastewater were 57.7% for nitrogen, 90.6% for phosphorus and 24.9% for potassium. These efficiencies are much greater than those quoted for a Salix/soil system, and thus Salix/gravel systems may have potential for wastewater treatment in environmentally sensitive areas or situations.     

A foliar morphometric approach to the study of salicaceae

An assemblage of leaves of four species of willows (Salix viminalis, S. alba, S. fragilis, andS. caprea), two of their hybrids (S. alba ×fragilis andS. caprea ×viminalis), two species of poplars (Populus alba andP. tremula), and two “external” species (Elaeagnus angustifolia andPyrus salicifolia) was analyzed. The study was designed to determine whether leaves that are very close in shape but belong to different species, particularly the elongated leaves ofS. viminalis, S. alba, S. fragilis, E. angustifolia, andP. salicifolia, could be discriminated by continuous foliar characters (that is, vegetative characters), despite both the great foliar polymorphism met in Salicaceae (especially in the genusPopulus) and hybridization problems. Our results show that multivariate analyses (principal component analysis [PCA] and cluster analysis) of an appropriate character set enable leaves to be classified in their own species at more than 98 %, even in these difficult conditions. It can be seen from this work that PCA is a good tool when it keeps a maximum of total variability; that is, when there are few taxa; on the other hand, cluster analysis is more appropriate with many taxa. One can then envisage the application of this morphometric approach to fossil-imprint determination, in which even fragmentary paleobotanical remains could be included. This would give access to real biodiversity of tertiary flora and to intraspecific variability.

---

Résumé  Un assemblage de feuilles de quatre espèces de saules (Salix viminalis, S. alba, S. fragilis, etS. caprea), deux de leurs hybrides (S. alba ×fragilis etS. caprea ×viminalis), ainsi que deux espèces de peupliers (Populus alba etP. tremula), et deux espèces “externes” (Elaeagnus angustifolia etPyrus salicifolia) a été étudié. Le but était de savoir si des feuilles de forme très proche mais d’espèces différentes (en particulier les feuilles allongées deS. viminalis, S. alba, S. fragilis, E. angustifolia, etP. salicifolia) pouvaient être discriminées par des caractères foliaires (donc végétatifs) continus, et ce malgré le très grand polymorphisme foliaire existant chez les Salicacées (surtout chez le genrePopulus), et les problèmes d’hybridation. Il en a résulté que les analyses multivariées (ACP et analyse agrégative) associées à un jeu de caractères approprié, permettent à plus de 98% le classement des feuilles dans leur propre espèce, même dans ces conditions difficiles. Il ressort de ce travail que l’ACP n’est un bon outil que lorsqu’ elle conserve un maximum de la variabilité totale, c’est-à-dire ici, quand les taxa sont peu nombreux; en revanche, l’analyse agrégative exprime le maximum de ses capacités en présence d’un grand nombre de taxa. On peut alors envisager l’application de cette approche morphométrique à la détermination d’empreintes fossiles, dans le but d’inclure même les restes fragmentaires dans les études paléobotaniques, ce qui donnerait accès à la réelle biodiversité des flores tertiaires et à la variabilité existant au sein des espèces.

     

Nomenclatural remarks on the Salix viminalis group in Norden

Larsson, G. 1995. Nomenclatural remarks on the Salix viminalis group in Norden. —Nord. J. Bot. 15: 343–346. Copenhagen. ISSN 0107–05513.
The taxa in the Salix viminalis group which have been found in Norden are lectotyp-ified: S. viminalis, S. dasyclados, S . x smithiana, S . x stipularis and S . x calodendron . Flora Nordica notes no. 12.     

An AFLP and RFLP linkage map and quantitative trait locus (QTL) analysis of growth traits in Salix

A genetic linkage map of Salix (2n = 38), composed of 325 AFLP and 38 RFLP markers has been constructed. The map was based on a population ( n = 87) derived from a cross between the male hybrid clone "Bj?rn" ( Salix viminalis x Salix schwerinii) and the female clone "78183" ( S. viminalis). Three hundred fifty seven AFLPs corresponding to DNA polymorphisms heterozygous in one parent and null in the other were scored. A total of 87 RFLP probes, most (83) derived from the Populus genome, yielded 39 and 11 polymorphic loci segregating in a 1:1 and 1:2:1 ratio respectively. Two maps, one for each parent, were constructed according to the "two-way pseudo-testcross" mapping strategy. The S. viminalis x S. schwerinii map (2,404 cM) included 217 markers and formed 26 major linkage groups while S. viminalis (1,844 cM) consisted of 146 markers placed on 18 major groups. In addition, eight and 14 additional minor linkage groups composed of less than four markers (doubles and triplets) were obtained in the S. viminalis x S. schwerinii and the S. viminalis maps, respectively. Both maps provided 70-80% genome coverage with an average density of markers of 14 cM. To investigate possible homologies between the parental maps, 20 AFLPs and 11 RFLPs segregating in 3:1 or 1:2:1 ratios were included in the linkage analysis. Eight linkage groups homologous between the two maps were detected. The present genetic map was used to identify quantitative trait loci (QTLs) affecting growth-related traits. Eleven QTLs were identified; seven QTLs for height growth, one QTL for stem diameter, one QTL for the height: diameter ratio, one QTL for the number of vegetative buds during flowering time and one QTL for the number of shoots. The estimated magnitude of the QTL effect ranged from 14 to 22% of the total phenotypic variance. One QTL associated with height growth and one affecting the height: diameter ratio were overlapping in the same marker interval with the QTL affecting stem diameter. QTL stability over years was estimated for traits measured in multiple years. Generally, QTLs were only significant in a single year although two QTLs for height growth were close to reaching the significance level in 2 consecutive years.     

Melampsora rust species on biomass willows in central and north-eastern Germany

Melampsora willow rusts are the most important fungal pathogens in short rotation coppices of biomass willows. In the past, breeding programmes for rust resistant biomass willows concentrated on the distinction of races within the forma specialis Melampsora larici-epitea f. sp. larici-epitea typica that colonized Salix viminalis and related clones. In a new breeding program that is based on a wider range of willow species it is necessary to identify further Melampsora species and formae specialis that are pathogens of willow species other than S. viminalis. Therefore, three stock collections with Salix daphnoides, Salix purpurea, and other shrub willow species (including S. viminalis) species were sampled in north-eastern Germany. A fourth stock collection in central Germany contributed rusts of tree willows (Salix fragilis and Salix alba) and the large shrub Salix caprea. Out of 156 rust samples, 149 were successfully sequenced for ITS rDNA. A phylogenetic analysis combining Neighbour-Joining, Maximum-Likelihood and Bayesian analysis revealed six species: Melampsora ribesii-purpureae, Melampsora allii-salicis-albae, Melampsora sp. aff. allii-fragilis, Melampsora larici-pentandrae, Melampsora larici-caprearum, and Melampsora larici-epitea. The first four species were found exclusively on the expected hosts. Melampsora larici-caprearum had a wider host range comprising S. caprea and S. viminalis hybrids. Melampsora larici-epitea can be further differentiated into two formae speciales. The forma specialis larici-epitea typica (59 samples) colonized Salix viminalis clones, Salix purpurea, Salix×dasyclados, and Salix×aquatica. In contrast to this relatively broad host range, f. sp. larici-daphnoides (65 samples) was found exclusively on Salix daphnoides. With the distinction and identification of the rust species/formae speciales it is now possible to test for race-specific resistances in a more targeted manner within the determined pairings of rust and willow species.     

Phytoextraction of heavy metals by two Salicaceae clones in symbiosis with arbuscular mycorrhizal fungi during the second year of a field trial

We evaluated the potential of Salix viminalis (5027) and Populus × generosa for the phytoextraction of heavy metals (HM) inoculated or not with an arbuscular mycorrhizal (AM) fungus Glomus intraradices during a second year of growth in a randomized complete block field trial on a slightly contaminated site. Both plant clones produced high aboveground biomass yields, however P. × generosa produced significantly more biomass than S. viminalis. The two plant clones accumulated high concentrations of Cd and Zn in their shoots, while Cu and Pb were stored in their roots. In general, S. viminalis accumulated higher concentrations of HM. The inoculation of G. intraradices in the previous year did not influence plant clones’ biomass yields during the second growing season. However, Cu and Cd translocation to shoots was limited, and Cu was preferentially concentrated in roots of inoculated plants, compared to non-inoculated plants, which were also colonized by native AM fungi taxa. Efficiency of S. viminalis and P. × generosa for Cd and Zn rehabilitation in slightly contaminated soil has been demonstrated, but mycorrhizal inoculation did not significantly increase HM extraction.     

Effect of chilling on the opening and abscisic acid content of dormant lateral buds of willow

A reduction in abscisic acid (ABA) content was not a pre-requisite for the breaking of dormancy of vegetative lateral buds of both field-grown trees and shoots of willow (Salix viminalis L.) maintained in controlled conditions. Similar variations in bud ABA levels were observed whether the shoots were stored in a warm (22 ± 1 °C) or cold (6 ± 0.5 °C) environment. Following transfer to a growth room the ABA content of chilled buds declined more rapidly than did that of non-chilled buds.     

Variation in the uptake of Arsenic, Cadmium, Lead, and Zinc by different species of willows Salix spp. grown in contaminated soils

The experiment assessed the variability of in seven clones of willow plants of high biomass production (Salix smithiana S-218, Salix smithiana S-150, Salix viminalis S-519, Salix alba S-464, Salix ’Pyramidalis’ S-141, Salix dasyclados S-406, Salix rubens S-391). They were planted in a pots for three vegetation periods in three soils differing in the total content of risk elements. Comparing the calculated relative decrease of total metal contents in soils, the phytoextraction potential of willows was obtained for cadmium (Cd) and zinc (Zn), moderately contaminated Cambisol and uncontaminated Chernozem, where aboveground biomass removed about 30% Cd and 5% Zn of the total element content, respectively. The clones showed variability in removing Cd and Zn, depending on soil type and contamination level: S. smithiana (S-150) and S. rubens (S-391) demonstrated the highest phytoextraction effect for Cd and Zn. For lead (Pb) and arsenic (As), the ability to accumulate the aboveground biomass of willows was found to be negligible in both soils. The results confirmed that willow plants show promising results for several elements, mainly for mobile ones like cadmium and zinc in moderate levels of contamination. The differences in accumulation among the clones seemed to be affected more by the properties of clones, not by the soil element concentrations or soil properties. However, confirmation and verification of the results in field conditions as well as more detailed investigation of the mechanisms of cadmium uptake in rhizosphere of willow plants will be determined by further research.     

Hybrid poplar clones with Populus maximowiczii parentage demonstrate postoviposition antibiosis to Cryptorhynchus lapathi (Coleoptera: Curculionidae)

Damage caused by the poplar-and-willow borer, Cryptorhynchus lapathi (L.) (Coleoptera: Curculionidae), is reported to vary among hybrid poplar clones. We evaluated oviposition preferences and larval success in four hybrid poplars on potted and field-planted trees. Oviposition occurred somewhat less frequently and abundantly on two clones with Populus maximowiczii Henry parentage in field-planted and potted trees, and significantly fewer larvae survived to adulthood on those clones. No adults emerged from field-planted NM 6 (Populus nigra L. x P. maximowiczii) and four emerged from TM 256-28 (Populus trichocarpa Torrey & Gray x P. maximowiczii) on which male-female pairs of C. lapathi had been caged. In contrast, 50 and 140 adults emerged over the same 2-yr period from two susceptible clones (n = 20), TD 52-226 (P. trichocarpa x Populus deltoides Bartram ex Marshall) and TN 302-9 (P. trichocarpa x P. nigra), respectively. Thus, resistance expressed by clones with P. maximowiczii parentage partially involves decreased levels of oviposition, but more significantly, antibiosis in resistant clones prevents the development of larvae, probably in early spring.     

Persistence of tree cavities used by cavity-nesting vertebrates declines in harvested forests

An abundant supply of cavity-bearing trees is important for maintaining wildlife communities in harvested forests. During harvesting, suitable trees and cavities are directly removed, and the longevity of cavities in retained trees may be reduced by increased exposure to wind and other disturbance factors. We examined patterns of cavity survival in retained trembling aspen (Populus tremuloides) trees in harvested stands compared with those in unharvested mature stands by monitoring the persistence of individual cavities. We followed 930 cavities in 3 harvest treatments for up to 17 years in pre-cut and uncut forest, and up to 13 years post-harvest (reserve patches and dispersed retention), in temperate-mixed forests of interior British Columbia, Canada. Average annual cavity loss rates were 5.6% in pre-cut and uncut forest, 7.2% for cavities in trees retained in reserves, and 8.1% for cavities in retained trees dispersed throughout cuts. Correspondingly, median cavity longevity was 15 years for cavities in pre-cut and uncut forest, 10 years for cavities retained in reserves, and 9 years for those in dispersed retention. Risk of loss increased most for cavities in living trees (factor of 2.17), but we found no detectable difference for cavities in recently dead trees and trees with advanced decay. We suggest retention of a range of aspen size and decay classes to allow for future cavity-tree recruitment in harvested stands. Inclusion of wildlife reserves as part of an overall forest management plan will also help to mitigate the effects of windthrow and maintain long-lived cavity resources required by a large portion of forest wildlife. © 2013 The Wildlife Society     

光肩星天牛体内纤维素酶活性及其与寄主选择的关系（英文）

为了揭示光肩星天牛Anoplophora glabripennis Motschulsky纤维素酶与寄主选择的关系, 以4种不同寄主树种（新疆杨Populus alba var. pyramidalis Bunge、箭杆杨Populus nigra var. thevestina (Dode) Bean、合作杨Populus simonii × Populus pyramidalis cv. opera Hsu和漳河柳Salix matsudana f. lobato-glandulosa Faug et Liu来源的光肩星天牛幼虫, 和以取食5种不同树种（臭椿Ailanthus altissima、毛白杨Populus tomentosa、合作杨、旱柳Salix matsudana Koidz.和复叶槭Acer negundo Linn.）的光肩星天牛成虫为实验对象, 测定其纤维素酶活性。结果表明: 不同寄主来源的光肩星天牛幼虫内切-β-1,4-葡聚糖酶活性在1.36~2.71 μmol葡萄糖/ (g FW·h)之间, β-葡萄糖苷酶活性在2.57~4.86 μmol葡萄糖/(g FW·h)之间;取食不同树种的光肩星天牛成虫内切-β-1,4-葡聚糖酶活性在4.08~9.27 μmol葡萄糖/(g FW·h)之间, β-葡萄糖苷酶活性在2.87~6.08 μmol葡萄糖/ (g FW·h)之间。不同寄主树种来源的光肩星天牛幼虫体内纤维素酶活性无显著性差异, 取食与否以及取食树种的不同对光肩星天牛成虫纤维素酶活有较大影响。     

Screening of willow species for resistance to heavy metals: comparison of performance in a hydroponics system and field trials

The aim of this study was to ascertain whether metal resistance in willow (Salix) clones grown in a hydroponics screening test correlated with data from the same clones grown independently in a field trial. If so, results from a short-term, glasshouse-based system could be extrapolated to the field, allowing rapid identification of willows suitable for planting in metal-contaminated substrates without necessitating longterm field trials. Principal Components Analysis was used to show groups of clones and to assess the relative importance of the parameters measured in both the hydroponics system and the field; including plant response factors such as increase in stem height, as well as metal concentrations in plant tissues. The clones tested fell into two distinct groups. Salix viminalis clones and the basket willow Black Maul (S. triandra) were less resistant to elevated concentrations of heavy metals than a group of hardier clones, including S. burjatica 'Germany,' S.x dasyclados, S. candida and S. spaethii. The more resistant clones produced more biomass in the glasshouse and field, and had higher metal concentrations in the wood. The less resistant clones had greater concentrations of Cu and Ni in the bark, and produced less biomass in the glasshouse and field. Significant relationships were found between the response of the same clones grown the in short-term glasshouse hydroponics system and in the field.     

Selection of mature and old stands by Corsican Nuthatch Sitta whiteheadi in harvested forests

In harvested forests, the bird community is largely determined by stand structure, which itself is determined by forestry practices. This study aimed to identify habitat variables determining the presence of Corsican Nuthatch Sitta whiteheadi – a threatened island endemic – in harvested Corsican Pine Pinus nigra laricio woods, with the aim of mitigating the impact of timber harvest on the bird. Comparison of occupied and unoccupied plots showed that this bird is found mostly in pure Corsican Pine stands, and is absent when more than 50% of trees are not this species. Nests were built in decaying pine snags between 20 and 100 cm diameter at breast height (dbh), but birds avoided stands with live pines < 70 cm dbh, and selected stands with pines > 80 cm dbh. Conservation of Corsican Nuthatch therefore depends on maintaining harvest rotations of more than 200 years, reducing the size of felling coupes in clear‐cutting systems or, preferably, practising selective cutting, maintaining a sufficient density of old trees and snags, and checking the encroachment of other tree species into Corsican Pine stands.