Crystal structure and solution NMR studies of Lys48-linked tetraubiquitin at neutral pH

Ubiquitin modification of proteins is used as a signal in many cellular processes. Lysine side-chains can be modified by a single ubiquitin or by a polyubiquitin chain, which is defined by an isopeptide bond between the C terminus of one ubiquitin and a specific lysine in a neighboring ubiquitin. Polyubiquitin conformations that result from different lysine linkages presumably differentiate their roles and ability to bind specific targets and enzymes. However, conflicting results have been obtained regarding the precise conformation of Lys48-linked tetraubiquitin. We report the crystal structure of Lys48-linked tetraubiquitin at near-neutral pH. The two tetraubiquitin complexes in the asymmetric unit show the complete connectivity of the chain and the molecular details of the interactions. This tetraubiquitin conformation is consistent with our NMR data as well as with previous studies of diubiquitin and tetraubiquitin in solution at neutral pH. The structure provides a basis for understanding Lys48-linked polyubiquitin recognition under physiological conditions.     

Certain pairs of ubiquitin-conjugating enzymes (E2s) and ubiquitin-protein ligases (E3s) synthesize nondegradable forked ubiquitin chains containing all possible isopeptide linkages

It is generally assumed that a specific ubiquitin ligase (E3) links protein substrates to polyubiquitin chains containing a single type of isopeptide linkage, and that chains composed of linkages through Lys(48), but not through Lys(63), target proteins for proteasomal degradation. However, when we carried out a systematic analysis of the types of ubiquitin (Ub) chains formed by different purified E3s and Ub-conjugating enzymes (E2s), we found, using Ub mutants and mass spectrometry, that the U-box E3, CHIP, and Ring finger E3s, MuRF1 and Mdm2, with the E2, UbcH5, form a novel type of Ub chain that contains all seven possible linkages, but predominantly Lys(48), Lys(63), and Lys(11) linkages. Also, these heterogeneous chains contain forks (bifurcations), where two Ub molecules are linked to the adjacent lysines at Lys(6) + Lys(11), Lys(27) + Lys(29), or Lys(29) + Lys(33) on the preceding Ub molecule. However, the HECT domain E3s, E6AP and Nedd4, with the same E2, UbcH5, form homogeneous chains exclusively, either Lys(48) chains (E6AP) or Lys(63) chains (Nedd4). Furthermore, with other families of E2s, CHIP and MuRF1 synthesize homogeneous Ub chains on the substrates. Using the dimeric E2, UbcH13/Uev1a, they attach Lys(63) chains, but with UbcH1 (E2-25K), MuRF1 synthesizes Lys(48) chains on the substrate. We then compared the capacity of the forked heterogeneous chains and homogeneous chains to support proteasomal degradation. When troponin I was linked by MuRF1 to a Lys(48)-Ub chain or, surprisingly, to a Lys(63)-Ub chain, troponin I was degraded rapidly by pure 26S proteasomes. However, when linked to the mixed forked chains, troponin I was degraded quite poorly, and its polyUb chain, especially the forked linkages, was disassembled slowly by proteasome-associated isopeptidases. Because these Ring finger and U-box E3s with UbcH5 target proteins for degradation in vivo, but Lys(63) chains do not, cells probably contain additional factors that prevent formation of such nondegradable Ub-conjugates and that protect proteins linked to Lys(63)-Ub chains from proteasomal degradation.     

Conformational dynamics of wild-type Lys-48-linked diubiquitin in solution

Proteasomal degradation is mediated through modification of target proteins by Lys-48-linked polyubiquitin (polyUb) chain, which interacts with several binding partners in this pathway through hydrophobic surfaces on individual Ub units. However, the previously reported crystal structures of Lys-48-linked diUb exhibit a closed conformation with sequestered hydrophobic surfaces. NMR studies on mutated Lys-48-linked diUb indicated a pH-dependent conformational equilibrium between closed and open states with the predominance of the former under neutral conditions (90% at pH 6.8). To address the question of how Ub-binding proteins can efficiently access the sequestered hydrophobic surfaces of Ub chains, we revisited the conformational dynamics of Lys-48-linked diUb in solution using wild-type diUb and cyclic forms of diUb in which the Ub units are connected through two Lys-48-mediated isopeptide bonds. Our newly determined crystal structure of wild-type diUb showed an open conformation, whereas NMR analyses of cyclic Lys-48-linked diUb in solution revealed that its structure resembled the closed conformation observed in previous crystal structures. Comparison of a chemical shift of wild-type diUb with that of monomeric Ub and cyclic diUb, which mimic the open and closed states, respectively, with regard to the exposure of hydrophobic surfaces to the solvent indicates that wild-type Lys-48-linked diUb in solution predominantly exhibits the open conformation (75% at pH 7.0), which becomes more populated upon lowering pH. The intrinsic properties of Lys-48-linked Ub chains to adopt the open conformation may be advantageous for interacting with Ub-binding proteins.     

Length of the active-site crossover loop defines the substrate specificity of ubiquitin C-terminal hydrolases for ubiquitin chains

UCHs [Ub (ubiquitin) C-terminal hydrolases] are a family of deubiquitinating enzymes that are often thought to only remove small C-terminal peptide tails from Ub adducts. Among the four UCHs identified to date, neither UCH-L3 nor UCH-L1 can catalyse the hydrolysis of isopeptide Ub chains, but UCH-L5 can when it is present in the PA700 complex of the proteasome. In the present paper, we report that the UCH domain of UCH-L5, different from UCH-L1 and UCH-L3, by itself can process the K48-diUb (Lys48-linked di-ubiquitin) substrate by cleaving the isopeptide bond between two Ub units. The catalytic specificity of the four UCHs is dependent on the length of the active-site crossover loop. The UCH domain with a long crossover loop (usually >14 residues), such as that of UCH-L5 or BAP1 [BRCA1 (breast cancer early-onset 1)-associated protein 1], is able to cleave both small and large Ub derivatives, whereas the one with a short loop can only process small Ub derivatives. We also found that elongation of the crossover loop enables UCH-L1 to have isopeptidase activity for K48-diUb in a length-dependent manner. Thus the loop length of UCHs defines their substrate specificity for diUb chains, suggesting that the chain flexibility of the crossover loop plays an important role in determining its catalytic activity and substrate specificity for cleaving isopeptide Ub chains.     

Structural basis for specific recognition of Lys 63‐linked polyubiquitin chains by NZF domains of TAB2 and TAB3

TAB2 and TAB3 activate the Jun N‐terminal kinase and nuclear factor‐κB pathways through the specific recognition of Lys 63‐linked polyubiquitin chains by its Npl4 zinc‐finger (NZF) domain. Here we report crystal structures of the TAB2 and TAB3 NZF domains in complex with Lys 63‐linked diubiquitin at 1.18 and 1.40 Å resolutions, respectively. Both NZF domains bind to the distal ubiquitin through a conserved Thr‐Phe dipeptide that has been shown to be important for the interaction of the NZF domain of Npl4 with monoubiquitin. In contrast, a surface specific to TAB2 and TAB3 binds the proximal ubiquitin. Both the distal and proximal binding sites of the TAB2 and TAB3 NZF domains recognize the Ile 44‐centred hydrophobic patch on ubiquitin but do not interact with the Lys 63‐linked isopeptide bond. Mutagenesis experiments show that both binding sites are required to enable binding of Lys 63‐linked diubiquitin. We therefore propose a mechanism for the recognition of Lys 63‐linked polyubiquitin chains by TAB2 and TAB3 NZF domains in which diubiquitin units are specifically recognized by a single NZF domain.     

A single MIU motif of MINDY‐1 recognizes K48‐linked polyubiquitin chains

The eight different types of ubiquitin (Ub) chains that can be formed play important roles in diverse cellular processes. Linkage‐selective recognition of Ub chains by Ub‐binding domain (UBD)‐containing proteins is central to coupling different Ub signals to specific cellular responses. The motif interacting with ubiquitin (MIU) is a small UBD that has been characterized for its binding to monoUb. The recently discovered deubiquitinase MINDY‐1/FAM63A contains a tandem MIU repeat (tMIU) that is highly selective at binding to K48‐linked polyUb. We here identify that this linkage‐selective binding is mediated by a single MIU motif (MIU2) in MINDY‐1. The crystal structure of MIU2 in complex with K48‐linked polyubiquitin chains reveals that MIU2 on its own binds to all three Ub moieties in an open conformation that can only be accommodated by K48‐linked triUb. The weak Ub binder MIU1 increases overall affinity of the tMIU for polyUb chains without affecting its linkage selectivity. Our analyses reveal new concepts for linkage selectivity and polyUb recognition by UBDs.     

Mapping the interactions between Lys48 and Lys63-linked di-ubiquitins and a ubiquitin-interacting motif of S5a

Numerous cellular processes are regulated by (poly)ubiquitin-mediated signaling events, which involve a covalent modification of the substrate protein by a single ubiquitin or a chain of ubiquitin molecules linked via a specific lysine. Remarkably, the outcome of polyubiquitination is linkage-dependent. For example, Lys48-linked chains are the principal signal for proteasomal degradation, while Lys63-linked chains act as nonproteolytic signals. Despite significant progress in characterization of various cellular pathways involving ubiquitin, understanding of the structural details of polyubiquitin chain recognition by downstream cellular effectors is missing. Here we use NMR to study the interaction of a ubiquitin-interacting motif (UIM) of the proteasomal subunit S5a with di-ubiquitin, the simplest model for polyubiquitin chain, to gain insights into the mechanism of polyubiquitin recognition by the proteasome. We have mapped the binding interface and characterized the stoichiometry and the process of UIM binding to Lys48- and Lys63-linked di-ubiquitin chains. Our data provide the first direct evidence that UIM binding involves a conformational transition in Lys48-linked di-ubiquitin, which opens the hydrophobic interdomain interface. This allows UIM to enter the interface and bind directly to the same ubiquitin hydrophobic-patch surface as utilized in UIM:monoubiquitin complexes. The results indicate that up to two UIM molecules can bind di-ubiquitin, and the binding interface between UIM and ubiquitin units in di-ubiquitin is essentially the same for both Lys48- and Lys63-linked chains. Our data suggest possible structural models for the binding of UIM and of full-length S5a to di-ubiquitin.     

Affinity makes the difference: nonselective interaction of the UBA domain of Ubiquilin-1 with monomeric ubiquitin and polyubiquitin chains

Ubiquilin/PLIC proteins belong to the family of UBL-UBA proteins implicated in the regulation of the ubiquitin-dependent proteasomal degradation of cellular proteins. A human presenilin-interacting protein, ubiquilin-1, has been suggested as potential therapeutic target for treating Huntington's disease. Ubiquilin's interactions with mono- and polyubiquitins are mediated by its UBA domain, which is one of the tightest ubiquitin binders among known ubiquitin-binding domains. Here we report the three-dimensional structure of the UBA domain of ubiquilin-1 (UQ1-UBA) free in solution and in complex with ubiquitin. UQ1-UBA forms a compact three-helix bundle structurally similar to other known UBAs, and binds to the hydrophobic patch on ubiquitin with a K_d of 20 μM. To gain structural insights into UQ1-UBA's interactions with polyubiquitin chains, we have mapped the binding interface between UQ1-UBA and Lys48- and Lys63-linked di-ubiquitins and characterized the strength of UQ1-UBA binding to these chains. Our NMR data show that UQ1-UBA interacts with the individual ubiquitin units in both chains in a mode similar to its interaction with mono-ubiquitin, although with an improved binding affinity for the chains. Our results indicate that, in contrast to UBA2 of hHR23A that has strong binding preference for Lys48-linked chains, UQ1-UBA shows little or no binding selectivity toward a particular chain linkage or between the two ubiquitin moieties in the same chain. The structural data obtained in this study provide insights into the possible structural reasons for the diversity of polyubiquitin chain recognition by UBA domains.     

Modulation of K11-linkage formation by variable loop residues within UbcH5A

Ubiquitination refers to the covalent addition of ubiquitin (Ub) to substrate proteins or other Ub molecules via the sequential action of three enzymes (E1, E2, and E3). Recent advances in mass spectrometry proteomics have made it possible to identify and quantify Ub linkages in biochemical and cellular systems. We used these tools to probe the mechanisms controlling linkage specificity for UbcH5A. UbcH5A is a promiscuous E2 enzyme with an innate preference for forming polyubiquitin chains through lysine 11 (K11), lysine 48 (K48), and lysine 63 (K63) of Ub. We present the crystal structure of a noncovalent complex between Ub and UbcH5A. This structure reveals an interaction between the Ub surface flanking K11 and residues adjacent to the E2 catalytic cysteine and suggests a possible role for this surface in formation of K11 linkages. Structure-guided mutagenesis, in vitro ubiquitination and quantitative mass spectrometry have been used to characterize the ability of residues in the vicinity of the E2 active site to direct synthesis of K11- and K63-linked polyubiquitin. Mutation of critical residues in the interface modulated the linkage specificity of UbcH5A, resulting in generation of more K63-linked chains at the expense of K11-linkage synthesis. This study provides direct evidence that the linkage specificity of E2 enzymes may be altered through active-site mutagenesis.     

Exploring the Linkage Dependence of Polyubiquitin Conformations Using Molecular Modeling

Posttranslational modification of proteins by covalent attachment of a small protein ubiquitin (Ub) or a polymeric chain of Ub molecules (called polyubiquitin) is involved in controlling a vast variety of processes in eukaryotic cells. The question of how different polyubiquitin signals are recognized is central to understanding the specificity of various types of polyubiquitination. In polyubiquitin, monomers are linked to each other via an isopeptide bond between the C-terminal glycine of one Ub and a lysine of the other. The functional outcome of polyubiquitination depends on the particular lysine involved in chain formation and appears to rely on linkage-dependent conformation of polyubiquitin. Thus, K48-linked chains, a universal signal for proteasomal degradation, under physiological conditions adopt a closed conformation where functionally important residues L8, I44, and V70 are sequestered at the interface between two adjacent Ub monomers. By contrast, K63-linked chains, which act as a nonproteolytic regulatory signal, adopt an extended conformation that lacks hydrophobic interubiquitin contact. Little is known about the functional roles of the so-called “noncanonical” chains (linked via K6, K11, K27, K29, or K33, or linked head-to-tail), and no structural information on these chains is available, except for information on the crystal structure of the head-to-tail-linked diubiquitin (Ub₂). In this study, we use molecular modeling to examine whether any of the noncanonical chains can adopt a closed conformation similar to that in K48-linked polyubiquitin. Our results show that the eight possible Ub₂ chains can be divided into two groups: chains linked via K6, K11, K27, or K48 are predicted to form a closed conformation, whereas chains linked via K29, K33, or K63, or linked head-to-tail are unable to form such a contact due to steric occlusion. These predictions are validated by the known structures of K48-, K63-, and head-to-tail-linked chains. Our study also predicts structural models for Ub₂ chains linked via K6, K11, or K27. The implications of these findings for linkage-selective recognition of noncanonical polyubiquitin signals by various receptors are discussed.     

Mms2-Ubc13 covalently bound to ubiquitin reveals the structural basis of linkage-specific polyubiquitin chain formation

Lys63-linked polyubiquitin chains participate in nonproteolytic signaling pathways, including regulation of DNA damage tolerance and NF-kappaB activation. E2 enzymes bound to ubiquitin E2 variants (UEV) are vital in these pathways, synthesizing Lys63-linked polyubiquitin chains, but how these complexes achieve specificity for a particular lysine linkage has been unclear. We have determined the crystal structure of an Mms2-Ubc13-ubiquitin (UEV-E2-Ub) covalent intermediate with donor ubiquitin linked to the active site residue of Ubc13. In the structure, the unexpected binding of a donor ubiquitin of one Mms2-Ubc13-Ub complex to the acceptor-binding site of Mms2-Ubc13 in an adjacent complex allows us to visualize at atomic resolution the molecular determinants of acceptor-ubiquitin binding. The structure reveals the key role of Mms2 in allowing selective insertion of Lys63 into the Ubc13 active site and suggests a molecular model for polyubiquitin chain elongation.     

Solution conformation of Lys63-linked di-ubiquitin chain provides clues to functional diversity of polyubiquitin signaling

Diverse cellular events are regulated by post-translational modification of substrate proteins via covalent attachment of one or a chain of ubiquitin molecules. The outcome of (poly)ubiquitination depends upon the specific lysine residues involved in the formation of polyubiquitin chains. Lys48-linked chains act as a universal signal for proteasomal degradation, whereas Lys63-linked chains act as a specific signal in several non-degradative processes. Although it has been anticipated that functional diversity between alternatively linked polyubiquitin chains relies on linkage-dependent differences in chain conformation/topology, direct structural evidence in support of this model has been lacking. Here we use NMR methods to determine the structure of a Lys63-linked di-ubiquitin chain. The structure is characterized by an extended conformation, with no direct contact between the hydrophobic residues Leu8, Ile44, and Val70 on the ubiquitin units. This structure contrasts with the closed conformation observed for Lys48-linked di-ubiquitin wherein these residues form the interdomain interface (Cook, W. J., Jeffrey, L. C., Carson, M., Zhijian, C., and Pickart, C. M. (1992) J. Biol. Chem. 267, 16467-16471; Varadan, R., Walker, O., Pickart, C., and Fushman, D. (2002) J. Mol. Biol. 324, 637-647). Consistent with the open conformation of the Lys(63)-linked di-ubiquitin, our binding studies show that both ubiquitin domains in this chain can bind a ubiquitin-associated domain from HHR23A independently and in a mode similar to that for mono-ubiquitin. In contrast, Lys48-linked di-ubiquitin binds in a different, higher affinity mode that has yet to be determined. This is the first experimental evidence that alternatively linked polyubiquitin chains adopt distinct conformations.     

Molecular basis for the unique deubiquitinating activity of the NF-kappaB inhibitor A20

Nuclear factor κB (NF-κB) activation in tumor necrosis factor, interleukin-1, and Toll-like receptor pathways requires Lys63-linked nondegradative polyubiquitination. A20 is a specific feedback inhibitor of NF-κB activation in these pathways that possesses dual ubiquitin-editing functions. While the N-terminal domain of A20 is a deubiquitinating enzyme (DUB) for Lys63-linked polyubiquitinated signaling mediators such as TRAF6 and RIP, its C-terminal domain is a ubiquitin ligase (E3) for Lys48-linked degradative polyubiquitination of the same substrates. To elucidate the molecular basis for the DUB activity of A20, we determined its crystal structure and performed a series of biochemical and cell biological studies. The structure reveals the potential catalytic mechanism of A20, which may be significantly different from papain-like cysteine proteases. Ubiquitin can be docked onto a conserved A20 surface; this interaction exhibits charge complementarity and no steric clash. Surprisingly, A20 does not have specificity for Lys63-linked polyubiquitin chains. Instead, it effectively removes Lys63-linked polyubiquitin chains from TRAF6 without dissembling the chains themselves. Our studies suggest that A20 does not act as a general DUB but has the specificity for particular polyubiquitinated substrates to assure its fidelity in regulating NF-κB activation in the tumor necrosis factor, interleukin-1, and Toll-like receptor pathways.     

Structural and biochemical studies of the open state of Lys48-linked diubiquitin

Ubiquitin (Ub) is a small protein highly conserved among eukaryotes and involved in practically all aspects of eukaryotic cell biology. Polymeric chains assembled from covalently-linked Ub monomers function as molecular signals in the regulation of a host of cellular processes. Our previous studies have shown that the predominant state of Lys48-linked di- and tetra-Ub chains at near-physiological conditions is a closed conformation, in which the Ub-Ub interface is formed by the hydrophobic surface residues of the adjacent Ub units. Because these very residues are involved in (poly)Ub interactions with the majority of Ub-binding proteins, their sequestration at the Ub-Ub interface renders the closed conformation of polyUb binding incompetent. Thus the existence of open conformation(s) and the interdomain motions opening and closing the Ub-Ub interface is critical for the recognition of Lys48-linked polyUb by its receptors. Knowledge of the conformational properties of a polyUb signal is essential for our understanding of its specific recognition by various Ub-receptors. Despite their functional importance, open states of Lys48-linked chains are poorly characterized. Here we report a crystal structure of the open state of Lys48-linked di-Ub. Moreover, using NMR, we examined interactions of the open state of this chain (at pH4.5) with a Lys48-linkage-selective receptor, the UBA2 domain of a shuttle protein hHR23a. Our results show that di-Ub binds UBA2 in the same mode and with comparable affinity as the closed state. Our data suggest a mechanism for polyUb signal recognition, whereby Ub-binding proteins select specific conformations out of the available ensemble of polyUb chain conformations. This article is part of a Special Issue entitled: Ubiquitin Drug Discovery and Diagnostics.     

NMR analysis of Lys63-linked polyubiquitin recognition by the tandem ubiquitin-interacting motifs of Rap80

Ubiquitin is a post-translational modifier that is involved in cellular functions through its covalent attachment to target proteins. Ubiquitin can also be conjugated to itself at seven lysine residues and at its amino terminus to form eight linkage-specific polyubiquitin chains for individual cellular processes. The Lys63-linked polyubiquitin chain is recognized by tandem ubiquitin-interacting motifs (tUIMs) of Rap80 for the regulation of DNA repair. To understand the recognition mechanism between the Lys63-linked diubiquitin (K63-Ub₂) and the tUIMs in solution, we determined the solution structure of the K63-Ub₂:tUIMs complex by using NOE restraints and RDC data derived from NMR spectroscopy. The structure showed that the tUIMs adopts a nearly straight and single continuous α-helix, and the two ubiquitin units of the K63-Ub₂ separately bind to each UIM motif. The interfaces are formed between Ile44-centered patches of the two ubiquitin units and the hydrophobic residues of the tUIMs. We also showed that the linker region between the two UIM motifs possesses a random-coil conformation in the free state, but undergoes the coil-to-helix transition upon complex formation, which simultaneously fixes the relative position of ubiquitin subunits. These data suggest that the relative position of ubiquitin subunits in the K63-Ub₂:tUIMs complex is essential for linkage-specific binding of Rap80 tUIMs.     

Mass spectrometry insights into a tandem ubiquitin‐binding domain hybrid engineered for the selective recognition of unanchored polyubiquitin

Unanchored polyubiquitin chains are emerging as important regulators of cellular physiology with diverse roles paralleling those of substrate‐conjugated polyubiquitin. However tools able to discriminate unanchored polyubiquitin chains of different isopeptide linkages have not been reported. We describe the design of a linker‐optimized ubiquitin‐binding domain hybrid (t‐UBD) containing two UBDs, a ZnF‐UBP domain in tandem with a linkage‐selective UBA domain, which exploits avidity effects to afford selective recognition of unanchored Lys48‐linked polyubiquitin chains. Utilizing native MS to quantitatively probe binding affinities we confirm cooperative binding of the UBDs within the synthetic protein, and desired binding specificity for Lys48‐linked ubiquitin dimers. Furthermore, MS/MS analyses indicate that the t‐UBD, when applied as an affinity enrichment reagent, can be used to favor the purification of endogenous unanchored Lys48‐linked polyubiquitin chains from mammalian cell extracts. Our study indicates that strategies for the rational design and engineering of polyubiquitin chain‐selective binding in nonbiological polymers are possible, paving the way for the generation of reagents to probe unanchored polyubiquitin chains of different linkages and more broadly the ‘ubiquitome’. All MS data have been deposited in the ProteomeXchange with identifier PXD004059 ( http://proteomecentral.proteomexchange.org/dataset/PXD004059 ).     

E2/E3-mediated assembly of lysine 29-linked polyubiquitin chains.

Polyubiquitin (Ub) chains linked through Lys-48-Gly-76 isopeptide bonds represent the principal signal by which substrates of the Ub-dependent protein degradation pathway are targeted to the 26 S proteasome, but the mechanism(s) whereby these chains are assembled on substrate proteins is poorly understood. Nor have assembly mechanisms or definitive functions been assigned to polyubiquitin chains linked through several other lysine residues of ubiquitin. We show that rabbit reticulocyte lysate harbors enzymatic components that catalyze the assembly of unanchored Lys-29-linked polyubiquitin chains. This reaction can be reconstituted using the ubiquitin-conjugating enzyme (E2) known as UbcH5A, a 120-kDa protein(s) that behaves as a ubiquitin-protein ligase (E3), and ubiquitin-activating enzyme (E1). The same partially purified E3 preparation also catalyzes the assembly of unanchored chains linked through Lys-48. Kinetic studies revealed a K(m) of approximately 9 microM for the acceptor ubiquitin in the synthesis of diubiquitin; this value is similar to the concentration of free ubiquitin in most cells. Similar kinetic behavior was observed for conjugation to Lys-48 versus Lys-29 and for conjugation to tetraubiquitin versus monoubiquitin. The properties of these enzymes suggest that there may be distinct pathways for ubiquitin-ubiquitin ligation versus substrate-ubiquitin ligation in vivo.     

Reading the ubiquitin postal code

Polyubiquitin chains are assembled through the formation of an isopeptide bond between a lysine side-chain or terminal amino group of a proximal ubiquitin moiety and the carboxy-terminal of a distal ubiquitin moiety. Protein substrates tagged by polyubiquitin chains of different linkages undergo different fates. Many polyubiquitin chain types have been characterized so far, notably Lys11, Lys48, Lys63 and linear chains. These different types of chains are synthesized, disassembled and recognized by selective enzymes and receptors. Here I survey the structural basis for the selective binding of polyubiquitin chains of specific linkages, with an emphasis on recent advances in our understanding of polyubiquitin chain structure and functions. Recent work suggests linkage-type discrimination by members of the NF-κb signalling and DNA repair pathways and a specific role for Lys48-linked polyubiquitin chain recognition by proteasome-associated proteins.     

Structural basis for specific recognition of Lys 63‐linked polyubiquitin chains by tandem UIMs of RAP80

RAP80 has a key role in the recruitment of the Abraxas–BRCC36–BRCA1–BARD1 complex to DNA‐damage foci for DNA repair through specific recognition of Lys 63‐linked polyubiquitinated proteins by its tandem ubiquitin‐interacting motifs (UIMs). Here, we report the crystal structure of the RAP80 tandem UIMs (RAP80‐UIM1‐UIM2) in complex with Lys 63‐linked di‐ubiquitin at 2.2 Å resolution. The two UIMs, UIM1 and UIM2, and the α‐helical inter‐UIM region together form a continuous 60 Å‐long α‐helix. UIM1 and UIM2 bind to the proximal and distal ubiquitin moieties, respectively. Both UIM1 and UIM2 of RAP80 recognize an Ile 44‐centered hydrophobic patch on ubiquitin but neither UIM interacts with the Lys 63‐linked isopeptide bond. Our structure suggests that the inter‐UIM region forms a 12 Å‐long α‐helix that ensures that the UIMs are arranged to enable specific binding of Lys 63‐linked di‐ubiquitin. This was confirmed by pull‐down analyses using RAP80‐UIM1‐UIM2 mutants of various length inter‐UIM regions. Further, we show that the Epsin1 tandem UIM, which has an inter‐UIM region similar to that of RAP80‐UIM1‐UIM2, also selectively binds Lys 63‐linked di‐ubiquitin.