Heterologous expression,purification and characterization of a highly thermolabile endoxylanase from the Antarctic fungus Cladosporium sp.

Numerous endoxylanases from mesophilic fungi have been purified and characterized. However, endoxylanases from cold-adapted fungi, especially those from Antarctica, have been less studied. In this work, a cDNA from the Antarctic fungus Cladosporium sp. with similarity to endoxylanases from glycosyl hydrolase family 10, was cloned and expressed in Pichia pastoris. The pure recombinant enzyme (named XynA) showed optimal activity on xylan at 50 °C and pH 6–7. The enzyme releases xylooligosaccharides but not xylose, indicating that XynA is a classical endoxylanase. The enzyme was most active on xylans with high content of arabinose (rye arabinoylan and wheat arabinoxylan) than on xylans with low content of arabinose (oat spelts xylan, birchwood xylan and beechwood xylan). Finally, XynA showed a very low thermostability. After 20–30 min of incubation at 40 °C, the enzyme was completely inactivated, suggesting that XynA would be the most thermolabile endoxylanase described so far in filamentous fungi. This is one of the few reports describing the heterologous expression and characterization of a xylanase from a fungus isolated from Antarctica.     

A comparison of the thermostability of cellulases from various thermophilic fungi

Summary The cellulase activities of six thermophilic fungi were compared. Although the thermophilic fungi grew at relatively high temperatures (>45°C) the optimum temperatures for assaying the various cellulase activities were only slightly higher than the optimum temperatures for the mesophilic fungi, Trichoderma harzianum. Over prolonged incubation (> 24 h) the thermophilic strains demonstrated a higher hydrolytic potential as a result of the greater thermostability of the cellulase components. Although the extracellular cellulase activities had similar pH and temperature optima, in some cases the thermostability of the extracellular components were considerably lower.     

Purification and biochemical characterization of glucose–cellobiose-tolerant cellulases from Scytalidium thermophilum

Two cellulases from Scytalidium thermophilum were purified and characterized, exhibiting tolerance to glucose and cellobiose. Characterization of purified cellulases I and II by mass spectrometry revealed primary structure similarities with an exoglucanase and an endoglucanase, respectively. Molecular masses were 51.2 and 45.6 kDa for cellulases I and II, respectively, as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Cellulases I and II exhibited isoelectric points of 6.2 and 6.9 and saccharide contents of 11 and 93 %, respectively. Optima of temperature and pH were 60–65 °C and 4.0 for purified cellulase I and 65 °C and 6.5 for purified cellulase II. Both cellulases maintained total CMCase activity after 60 min at 60 °C. Cysteine, Mn²⁺, dithiotreitol and ß-mercaptoethanol-stimulated cellulases I and II. The tolerance to cellulose hydrolysis products and the high thermal stabilities of Scytalidium cellulases suggest good potential for industrial applications.     

Temperature effects on hyphal growth of wood-decay basidiomycetes isolated from Pinus densiflora deadwood

Hyphal growth rates were tested on malt extract agar plates at eight different temperatures (5–40?°C) using 36 isolates of 17 basidiomycete species obtained from Pinus densiflora deadwood in Japan. All isolates of four brown rot species showed optimum growth at 30?°C, whereas the optimum growth temperature of white rot species varied from 20?°C to 30?°C. Analysis using a dataset from four cooler sites showed that brown rot fungi grew more rapidly than white rot fungi at higher temperatures (25?°C, 30?°C, and 35?°C). These results suggest that the hyphal growth of brown rot fungi might be physiologically adapted to higher temperatures than those of white rot fungi among the fungal species inhabiting deadwood of P. densiflora in Japan.     

Ion-beam and gamma-ray irradiations induce thermotolerant mutants in the entomopathogenic fungus Metarhizium anisopliae s.l.

Entomopathogenic fungi, such as Metarhizium anisopliae (Metch.) Sorokin, are important agents for the biological control of insect pests. However, these fungi are not compatible with high temperatures. In this study, mutagenesis using ion beams or gamma rays was used to generate five potentially thermotolerant mutants from two wild-type isolates of M. anisopliae (two using ion beams and three using gamma rays). The mutant isolates had a higher upper thermal limit for vegetative growth compared to the wild types (by 2–3°C) and enhanced tolerance to wet–heat stress of 45°C for conidial germination. At 25°C and 30°C, most mutants were as virulent to maize weevil adults as the wild type, however, one mutant produced using ion beams almost lost virulence entirely. These results indicate that ion beams and gamma rays are useful tools for improving biological characteristics, such as thermotolerance, in entomopathogenic fungi, but that mutants must be carefully evaluated for unpredictable negative side effects.     

Saccharification of cellolulose by the cellulolytic enzyme system of Thermonospora sp. I. Stability of cellulolytic activities with respect to time,temperature, and pH

The stabilities and optima with respect to temperature and pH of the β-glucosidase, Avicelase, and carboxymethylcellulase (CMCase) activity of Thermomonospora sp., in the culture filtrate, culture whole broth, and filtrate after sonication of culture solids, are reported. The β-glucosidase is cell associated and has an optimal activity at about pH 6.5 and 55°C. In the whole culture broth, it has a half-life of about 8 hr at 55°C and less than 1 hr at 60°C, while the half-life of the activity in the sonicated, cell-free filtrate is less than 1 hr at 55°C. The Avicelase and CMCase activities occur in the extracellular culture fluid and have optima at about pH 7.0 and 5.9, and 65 and 70°C, respectively. The CMCase activity is stable over 24 hr at 60°C, but declines by 50% in the same period at 65°C. The Avicelase activity declines by 15% over 24 hr at 55°C, and by 50% at 60°C. The highest pH studied (pH 7.3) was the most destabilizing for all three activities. The thermostable characteristics of the cellulases from Themomonospora appear to make them suitable for commercial saccharification processes operating at elevated temperatures.     

Impact of disulfide bonds on the folding and refolding capability of a novel thermostable GH45 cellulase

A new cellulase (TaCel45) of glycoside hydrolase family 45 was identified in the thermophilic fungus Thielavia arenaria XZ7 and was successfully expressed in Pichia pastoris. The specific activities of TaCel45 towards lichenin, sodium carboxymethylcellulose (CMC-Na), and barley β-glucan were 769, 498, and 486 U/mg protein, respectively, which are higher than the values for all other reported GH45 cellulases. TaCel45 had maximum activity at pH 5.0–6.0 and 60–65 °C with barley β-glucan and CMC-Na as substrates and had a melting temperature (T_m) of 68.4 °C. However, TaCel45 exhibited extraordinary thermostability at 90 and 100 °C, retaining more than 70 and 45% of its activity after a 1-h incubation, respectively. Seven mutants (C11S, C12S, C16S, C31S, C171S, C193S, and C203S) were then constructed to investigate the effects of each disulfide bond on the structure, activity, and stability of TaCel45. As a result, six disulfide bonds (C11-C136, C16-C87, C31-C57, C88-C203, C90-C193, and C160-Cy171) were found to be indispensable for the folding, secretion, and activity of TaCel45, while C12-C48 was critical for thermal adaptation and refolding. The mutant C12S showed decreased optimal temperature and T_m values of 50 and 60.2 °C, respectively, and retained less than 50% of the thermal refolding ability of the wild type. Overall, this study demonstrated that disulfide bonds play a vital role in the folding and refolding capability and thermostability of this GH45 cellulase.

     

Production of cellulases and xylanase by Aspergillus fumigatus SK1 using untreated oil palm trunk through solid state fermentation

Direct utilization of untreated oil palm trunk (OPT) for cellulases and xylanase production by Aspergillus fumigatus SK1 was conducted under solid-state fermentation (SSF). The highest activities of extracellular cellulases and xylanases were produced at 80% moisture level, initial pH 5.0, 1 × 10⁸ spore/g (inoculum) with 125 μm of OPT as sole carbon source. The cellulases and xylanase activities obtained were 54.27, 3.36, 4.54 and 418.70 U/g substrates for endoglucanase (CMCase), exoglucanase (FPase), β-glucosidase and xylanase respectively. The crude cellulases and xylanase required acidic condition to retain their optimum activities (pH 4.0). Crude cellulases and xylanase were more stable at 40 °C compared to their optimum activities conditions (60 °C for FPase and 70 °C for CMCase, β-glucosidase and xylanase). SDS-PAGE and zymogram analysis showed that Aspergillus fumigatus SK1 could secrete cellulases (endoglucanase, exoglucanase and β-glucosidase), xylanase and protease. Enzymatic degradation of alkaline treated OPT with concentrated crude cellulases and xylanases resulted in producing polyoses.     

Study of cellulases from a newly isolated thermophilic and cellulolytic <Emphasis Type="Italic">Brevibacillus</Emphasis> sp. strain JXL

A potentially novel aerobic, thermophilic, and cellulolytic bacterium designated as Brevibacillus sp. strain JXL was isolated from swine waste. Strain JXL can utilize a broad range of carbohydrates including: cellulose, carboxymethylcellulose (CMC), xylan, cellobiose, glucose, and xylose. In two different media supplemented with crystalline cellulose and CMC at 57°C under aeration, strain JXL produced a basal level of cellulases as FPU of 0.02 IU/ml in the crude culture supernatant. When glucose or cellobiose was used besides cellulose, cellulase activities were enhanced ten times during the first 24 h, but with no significant difference between these two simple sugars. After that time, however, culture with glucose demonstrated higher cellulase activities compared with that from cellobiose. Similar trend and effect on cellulase activities were also obtained when glucose or cellobiose served as a single substrate. The optimal doses of cellobiose and glucose for cellulase induction were 0.5 and 1%. These inducing effects were further confirmed by scanning electron microscopy (SEM) images, which indicated the presence of extracellular protuberant structures. These cellulosome-resembling structures were most abundant in culture with glucose, followed by cellobiose and without sugar addition. With respect to cellulase activity assay, crude cellulases had an optimal temperature of 50°C and a broad optimal pH range of 6–8. These cellulases also had high thermotolerance as evidenced by retaining more than 50% activity at 100°C after 1 h. In summary, this is the first study to show that the genus Brevibacillus may have strains that can degrade cellulose.     

Functional Expression of a Thermostable Endoglucanase from <Emphasis Type="Italic">Thermoascus aurantiacus</Emphasis> RCKK in <Emphasis Type="Italic">Pichia pastoris</Emphasis> X-33 and Its Characterization

Thermostable cellulases offer several advantages like higher rates of substrate hydrolysis, lowered risk of contamination, and increased flexibility with respect to process design. In the present study, a thermostable native endoglucanase nEG (EC 3.2.1.4) was purified and characterized from T. aurantiacus RCKK. Further, it was cloned in P. pastoris X-33 and processed for over expression. Expression of recombinant endoglucanase (rEG) of molecular size ~?33 kDa was confirmed by SDS-PAGE and western blotting followed by in gel activity determination by zymogram analysis. Similar to nEG, the purified rEG was characterized to harbor high thermostability while retaining 50% of its initial activity even after 6- and 10-h incubation at 80 and 70 °C, respectively, and exhibited considerable stability in pH range 3.0–7.0. CD spectroscopy revealed more than 20% β-sheets in protein structure consistently when incubated upto 85 °C as a speculated reason for protein high thermostability. Interestingly, both nEG and rEG were found tolerant up to 10% of the presence of 1-ethyl-3-methylimidazolium acetate [C2mim][OAc]. Values of the catalytic constants K_m and V_max for rEG were recorded as 2.5 mg/ml and 303.4 µmol/mg/min, respectively. Thermostability, pH stability, and resistance to the presence of ionic liquid signify the potential applicability of present enzyme in cellulose hydrolysis and enzymatic deinking of recycled paper pulp.     

Production of extracellular hydrolase enzymes by fungi from King George Island

Fungi are known to produce a range of extracellular enzymes and other secondary metabolites. Investment in extracellular enzyme production may be an important element of the survival strategy of these fungi in maritime Antarctic soils. This study focuses on fungi that were isolated from ornithogenic, undisturbed and human-impacted soils collected from the Fildes Peninsula, King George Island, Antarctica, during the austral summer in February 2007. We (1) describe fungal diversity based on molecular approaches, (2) describe the thermal characteristics of the fungal isolates, and (3) screen extracellular hydrolase enzyme production (amylase and cellulase) by the isolates. Soil samples were cultured using the Warcup soil plating technique and incubated at 4 and 25 °C to allow basic thermal classification. In total, 101 isolates were obtained. All the isolates were screened at culture temperatures of 4 and 25 °C in order to detect activity of extracellular hydrolase enzymes. At 25 °C, ornithogenic penguin rookery soils recorded the lowest diversity of fungi, with little difference in diversity apparent between the other soils examined. At 4 °C, an undisturbed site recorded the lowest and a human-impacted site the highest diversity of fungi. The majority of the fungi identified in this study were in the mesophilic thermal class. Six strains possessed significant activity for amylase and 13 for cellulase at 25 °C. At 4 °C, four strains showed significant amylase and 22 significant cellulase activity. The data presented increase our understanding of microbial responses to environmental temperature.     

Fermentative production of extracellular amylase from novel amylase producer,Tuber maculatum mycelium,and its characterization

Abstract

Truffles are symbiotic hypogeous edible fungi (form of mushroom) that form filamentous mycelia in their initial phase of the growth cycle as well as a symbiotic association with host plant roots. In the present study, Tuber maculatum mycelia were isolated and tested for extracellular amylase production at different pH on solid agar medium. Furthermore, the mycelium was subjected to submerged fermentation for amylase production under different culture conditions such as variable carbon sources and their concentrations, initial medium pH, and incubation time. The optimized conditions after the experiments included soluble starch (0.5% w/v), initial medium pH of 7.0, and incubation time of 7 days, at room temperature (22?±?2?°C) under static conditions which resulted in 1.41?U/mL of amylase. The amylase thus obtained was further characterized for its biocatalytic properties and found to have an optimum activity at pH 5.0 and a temperature of 50?°C. The enzyme showed good thermostability at 50?°C by retaining 98% of the maximal activity after 100?min of incubation. The amylase activity was marginally enhanced in presence of Cu²⁺ and Na⁺ and slightly reduced by K⁺, Ca²⁺, Fe²⁺, Mg²⁺, Co²⁺, Zn²⁺, and Mn²⁺ ions at 1?mM concentration.     

Enhancement of the thermostability of a recombinant β-agarase, AgaB, from Zobellia galactanivorans by random mutagenesis

Random mutagenesis was performed on β-agarase, AgaB, from Zobellia galactanivorans to improve its catalytic activity and thermostability. The activities of three mutants E99K, T307I and E99K–T307I were approx. 140, 190 and 200%, respectively, of wild type β-agarase (661 U/mg) at 40°C. All three mutant enzymes were stable up to 50°C and E99K–T307I had the highest thermostability. The melting temperature (T _m) of E99K–T307I, determined by CD spectra, was increased by 5.2°C over that of the wild-type enzyme (54.6°C). Activities of both the wild-type and E99K–T307I enzymes, as well as their overall thermostabilities, increased in 1 mM CaCl₂. The E99K–T307I enzyme was stable at 55°C with 1 mM CaCl₂, reaching 260% of the activity the wild-type enzyme held at 40°C without CaCl₂.     

Highly thermostable neutral protease from Bacillus stearothermophilus

Bacillus stearothermophilus MK232, which produced a highly thermostable neutral protease, was isolated from a natural environment. By several steps of mutagenesis, a hyper-producing mutant strain, YG185, was obtained. The enzyme productivity was twice as much as that of the original strain. This extracellular neutral protease was purified and crystallized. The molecular weight of the enzyme was 34,000 by SDS-polyacrylamide gel electrophoresis and gel filtration. The optimum pH and temperature for the enzyme activity were 7.5 and 70°C, respectively, and the enzyme was stable at pH 5–10 and below 70°C. The thermostability and specific activity of the new protease are around 10% and 40% higher than those of thermolysin (the neutral protease from Bacillus thermoproteolyticus), respectively. The enzyme was inactivated by EDTA, but not by phenylmethylsulfonyl fluoride. These results indicate that the enzyme is a highly thermostable neutral-(metallo)protease.     

Impact of cofactor-binding loop mutations on thermotolerance and activity of E. coli transketolase

Improvement of thermostability in engineered enzymes can allow biocatalysis on substrates with poor aqueous solubility. Denaturation of the cofactor-binding loops of Escherichia coli transketolase (TK) was previously linked to the loss of enzyme activity under conditions of high pH or urea. Incubation at temperatures just below the thermal melting transition, above which the protein aggregates, was also found to anneal the enzyme to give an increased specific activity. The potential role of cofactor-binding loop instability in this process remained unclear. In this work, the two cofactor-binding loops (residues 185–192 and 382–392) were progressively mutated towards the equivalent sequence from the thermostable Thermus thermophilus TK and variants assessed for their impact on both thermostability and activity. Cofactor-binding loop 2 variants had detrimental effects on specific activity at elevated temperatures, whereas the H192P mutation in cofactor-binding loop 1 resulted in a two-fold improved stability to inactivation at elevated temperatures, and increased the critical onset temperature for aggregation. The specific activity of H192P was 3-fold and 19-fold higher than that for wild-type at 60 °C and 65 °C respectively, and also remained 2.7-4 fold higher after re-cooling from pre-incubations at either 55 °C or 60 °C for 1 h. Interestingly, H192P was also 2-times more active than wild-type TK at 25 °C. Optimal activity was achieved at 60 °C for H192P compared to 55 °C for wild type. These results show that cofactor-binding loop 1, plays a pivotal role in partial denaturation and aggregation at elevated temperatures. Furthermore, a single rigidifying mutation within this loop can significantly improve the enzyme specific activity, as well as the stability to thermal denaturation and aggregation, to give an increased temperature optimum for activity.     

A versatile tool in controlling aggregation and Ag nanoparticles assisted in vitro folding of thermally denatured zDHFR

BackgroundProteins have tendency to form inactive aggregates at higher temperatures due to thermal instability. Maintenance of thermal stability is essential to gain the protein in sufficient quantity and biologically active form during their commercial production.MethodsBL21-DE3 Rosetta E. coli cells which contains plasmid pET43.1a vector was used for producing zDHFR protein commercially. The purification of N-terminal Histidine tagged zDHFR was performed by Immobilized Metal Ion chromatography (IMAC). Investigations were performed in existence and non existence of Silver nanoparticles (AgNPs). The inactivation kinetics of zDHFR in existence and non existence of AgNPs were monitored over a range of 40–80 °C as monitored by UV–Visible absorption spectroscopy.ResultsThe protein completely lost its activity at 55 °C. Kinetics of inactivated zDHFR follows first order model in presence and absence of AgNPs. Decrease in rate constant (k) values at respective temperatures depicts that AgNPs contribute in the thermostability of the protein. AgNPs also assists in regaining the activity of zDHFR protein.ConclusionsAgNPs helps in maintaining thermostability and reducing the aggregation propensity of zDHFR protein.General significanceResult explains that AgNPs are recommended as a valuable system in enhancing the industrial production of biologically active zDHFR protein which is an important component in folate cycle and essential for survival of cells and prevents the protein from being aggregated.     

Utilization of renewable agricultural residues for the production of extracellular halostable cellulase from newly isolated Halomonas sp. strain PS47

A newly isolated biopolymer-degrading halophilic bacterium, Halomonas sp. strain PS47, yielded higher cellulase activity (0.0076 U/ml) in mineral salt medium (MM63). Activity increased to 0.029 U/ml when carboxymethyl cellulose (0.5 % w/v) was used as carbon source and further to 0.138 U/ml when a combination of yeast extract and peptone was used as nitrogen source. Enzyme secretion was maximal during late exponential and stationary phases (0.15 U/ml, 48 h). Among different agro-residues (1 % w/v), wheat bran gave the highest activity (0.12 U/ml) at pH 7.5, 30 °C and 6 % (w/v) NaCl. The cellulase exhibited higher activity at pH 7.1 and 50 °C. The enzyme exhibited activity over a wide range of NaCl concentrations (0–4 M). Optimum activity was at 0–1 M NaCl. At 4 M NaCl, activity was reduced to 65 % of the initial value. The present investigation thus contributes to the limited information available on halostable cellulases.     

Biomass hydrolyzing enzymes from plant pathogen Xanthomonas axonopodis pv. punicae: optimizing production and characterization

Xanthomonas axonopodis pv. punicae strain—a potent plant pathogen that causes blight disease in pomegranate—was screened for cellulolytic and xylanolytic enzyme production. This strain produced endo-β-1,4-glucanase, filter paper lyase activity (FPA), β-glucosidase and xylanase activities. Enzyme production was optimized with respect to major nutrient sources like carbon and nitrogen. Carboxy methyl cellulose (CMC) was a better inducer for FPA, CMCase and xylanase production, while starch was found to be best for cellobiase. Soybean meal/yeast extract at 0.5 % were better nitrogen sources for both cellulolytic and xylanolytic enzyme production while cellobiase and xylanase production was higher with peptone. Surfactants had no significant effect on levels of extracellular cellulases and xylanases. A temperature of 28 °C and pH 6–8 were optimum for production of enzyme activities. Growth under optimized conditions resulted in increases in different enzyme activities of around 1.72- to 5-fold. Physico-chemical characterization of enzymes showed that they were active over broad range of pH 4–8 with an optimum at 8. Cellulolytic enzymes showed a temperature optimum at around 55 °C while xylanase had highest activity at 45 °C. Heat treatment of enzyme extract at 75 °C for 1 h showed that xylanase activity was more stable than cellulolytic activities. Xanthomonas enzyme extracts were able to act on biologically pretreated paddy straw to release reducing sugars, and the amount of reducing sugars increased with incubation time. Thus, the enzymes produced by X. axonopodis pv. punicae are more versatile and resilient with respect to their activity at different pH and temperature. These enzymes can be overproduced and find application in different industries including food, pulp and paper and biorefineries for conversion of lignocellulosic biomass.     

The mechanism of cryohemolysis: by direct observation with the cryomicroscope and the electron microscope.

Blood films (3–8 μm thick) supported between two glass coverslips were frozen to ?20 °C. In the extracellular areas, ice cavities of the order of 0.2 μm separated by bands of dense plasma were evident when examined with the electron microscope; intracellular ice was not observed with the light microscope. Electron microscopy also showed the presence of intracellular ice particles of the order of 0.2–0.7 μm, these appeared as fine reticulations when observed with the light microscope. Upon gradual rewarming the following changes were observed: recrystallization in the extracellular matrix (?18 to ?8 °C), intracellular recrystallization (?13 to ?10 °C), transfer of water from erythrocytes to extracellular areas (?9 to ?7 °C), and melting and hemolysis (?6 to ?2 °C).Freezing of blood at ?3 °C and subsequent thawing did not cause hemolysis of the red cells. In blood frozen at ?3 °C and cooled to ?20 °C or frozen by abrupt exposure to 20 °C the erythrocytes hemolyzed in 7/16–11/16 of a second, whereas in blood frozen at ?3 °C and cooled to ?10 °C the cells hemolyzed in 5–15 sec even though the mode if lysis (i.e., uniform seepage of hemoglobin from the surface of the cell) was similar in all cases. This indicates that the presence of intracellular ice does not seem to play a major role in the injury to the erythrocytes. The mechanism of cryoinjury demonstrated by hemolysis has been discussed.