Structure of magainin and alamethicin in model membranes studied by x-ray reflectivity

We have investigated the structure of lipid bilayers containing varied molar ratios of different lipids and the antimicrobial peptides magainin and alamethicin. For this structural study, we have used x-ray reflectivity on highly aligned solid-supported multilamellar lipid membranes. The reflectivity curves have been analyzed by semi-kinematical reflectivity theory modeling the bilayer density profile rho(z). Model simulations of the reflectivity curves cover a large range of vertical momentum transfer q(z), and yield excellent agreement between data and theory. The structural changes observed as a function of the molar peptide/lipid concentration P/L are discussed in a comparative way.     

Interaction between lipid monolayers and poloxamer 188: an X-ray reflectivity and diffraction study

The mechanism by which poloxamer 188 (P188) seals a damaged cell membrane is examined using the lipid monolayer as a model system. X-ray reflectivity and grazing-incidence x-ray diffraction results show that at low nominal lipid density, P188, by physically occupying the available area and phase separating from the lipids, forces the lipid molecules to pack tightly and restore the barrier function of the membrane. Upon compression to bilayer equivalent pressure, P188 is squeezed out from the lipid monolayer, allowing a graceful exit of P188 when the membrane integrity is restored.     

Mechanism of alamethicin insertion into lipid bilayers.

Alamethicin adsorbs on the membrane surface at low peptide concentrations. However, above a critical peptide-to-lipid ratio (P/L), a fraction of the peptide molecules insert in the membrane. This critical ratio is lipid dependent. For diphytanoyl phosphatidylcholine it is about 1/40. At even higher concentrations P/L > or = 1/15, all of the alamethicin inserts into the membrane and forms well-defined pores as detected by neutron in-plane scattering. A previous x-ray diffraction measurement showed that alamethicin adsorbed on the surface has the effect of thinning the bilayer in proportion to the peptide concentration. A theoretical study showed that the energy cost of membrane thinning can indeed lead to peptide insertion. This paper extends the previous studies to the high-concentration region P/L > 1/40. X-ray diffraction shows that the bilayer thickness increases with the peptide concentration for P/L > 1/23 as the insertion approaches 100%. The thickness change with the percentage of insertion is consistent with the assumption that the hydrocarbon region of the bilayer matches the hydrophobic region of the inserted peptide. The elastic energy of a lipid bilayer including both adsorption and insertion of peptide is discussed. The Gibbs free energy is calculated as a function of P/L and the percentage of insertion phi in a simplified one-dimensional model. The model exhibits an insertion phase transition in qualitative agreement with the data. We conclude that the membrane deformation energy is the major driving force for the alamethicin insertion transition.     

The transmembrane oligomers of coronavirus protein E

We have tested the hypothesis that severe acute respiratory syndrome (SARS) coronavirus protein E (SCoVE) and its homologs in other coronaviruses associate through their putative transmembrane domain to form homooligomeric alpha-helical bundles in vivo. For this purpose, we have analyzed the results of molecular dynamics simulations where all possible conformational and aggregational space was systematically explored. Two main assumptions were considered; the first is that protein E contains one transmembrane alpha-helical domain, with its N- and C-termini located in opposite faces of the lipid bilayer. The second is that protein E forms the same type of transmembrane oligomer and with identical backbone structure in different coronaviruses. The models arising from the molecular dynamics simulations were tested for evolutionary conservation using 13 coronavirus protein E homologous sequences. It is extremely unlikely that if any of our assumptions were not correct we would find a persistent structure for all the sequences tested. We show that a low energy dimeric, trimeric and two pentameric models appear to be conserved through evolution, and are therefore likely to be present in vivo. In support of this, we have observed only dimeric, trimeric, and pentameric aggregates for the synthetic transmembrane domain of SARS protein E in SDS. The models obtained point to residues essential for protein E oligomerization in the life cycle of the SARS virus, specifically N15. In addition, these results strongly support a general model where transmembrane domains transiently adopt many aggregation states necessary for function.     

Lipid peroxidation induces cholesterol domain formation in model membranes

Numerous reports have established that lipid peroxidation contributes to cell injury by altering the basic physical properties and structural organization of membrane components. Oxidative modification of polyunsaturated phospholipids has been shown, in particular, to alter the intermolecular packing, thermodynamic, and phase parameters of the membrane bilayer. In this study, the effects of oxidative stress on membrane phospholipid and sterol organization were measured using small angle x-ray diffraction approaches. Model membranes enriched in dilinoleoylphosphatidylcholine were prepared at various concentrations of cholesterol and subjected to lipid peroxidation at physiologic conditions. At cholesterol-to-phospholipid mole ratios (C/P) as low as 0.4, lipid peroxidation induced the formation of discrete, membrane-restricted cholesterol domains having a unit cell periodicity or d-space value of 34 A. The formation of cholesterol domains correlated directly with lipid hydroperoxide levels and was inhibited by treatment with vitamin E. In the absence of oxidative stress, similar cholesterol domains were observed only at C/P ratios of 1.0 or higher. In addition to changes in sterol organization, lipid peroxidation also caused reproducible changes in overall membrane structure, including a 10 A reduction in the width of the surrounding, sterol-poor membrane bilayer. These data provided direct evidence that lipid peroxidation alters the essential organization and structure of membrane lipids in a manner that may contribute to changes in membrane function during aging and oxidative stress-related disorders.     

The helix-to-sheet transition of an HIV-1 fusion peptide derivative changes the mechanical properties of lipid bilayer membranes

A short sequence on the gp41 envelope protein of HIV-1 is integral to infection by the virus. Without this sequence, termed the fusion peptide (FP), the virus is far less effective at fusing with the cellular membrane. One of the interesting features of the isolated FP is that it transitions between an α-helical conformation and a β-sheet conformation in lipid bilayer membranes as a function of lipid composition and concentration, and the transition correlates with fusion. To better understand how the conformations of the FP impact lipid bilayer membranes, a variant of the FP that does not strongly promote fusion, termed gp41rk, was studied. Circular dichroism spectroscopy, dynamic light scattering, small-angle neutron scattering (SANS) and neutron spin echo spectroscopy (NSE) were used to relate the conformation of gp41rk to the structure and mechanical properties of lipid bilayer membrane vesicles composed of a 7:3 molar ratio mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine and 1,2-dimyristoyl-sn-glycero-3-phospho-(1′-rac-glycerol). At a peptide-to-lipid ratio (P/L) of 1/200, it adopts an α-helical conformation, while gp41rk is a β-sheet at a P/L of 1/50 in the unilamellar vesicles. SANS reveals that the lipid bilayer membrane becomes thicker when gp41rk adopts a β-sheet conformation, which indicates that the high-concentration state of the peptide increases the order of the lipid acyl chains. At the same time, NSE demonstrates that the bilayer becomes more rigid, demonstrating that the β-sheet conformation, which correlates with fusion for the native FP sequence, stiffens the bilayer. The results have implications for the function of the FP.     

Energetics of pore formation induced by membrane active peptides

Antimicrobial peptides are known to form pores in cell membranes. We study this process in model bilayers of various lipid compositions. We use two of the best-studied peptides, alamethicin and melittin, to represent peptides making two types of pores, that is, barrel-stave pores and toroidal pores. In both cases, the key control variable is the concentration of the bound peptides in the lipid bilayers (expressed in the peptide-lipid molar ratio, P/L). The method of oriented circular dichroism (OCD) was used to monitor the peptide orientation in bilayers as a function of P/L. The same samples were scanned by X-ray diffraction to measure the bilayer thickness. In all cases, the bilayer thickness decreases linearly with P/L and then levels off after P/L exceeds a lipid-dependent critical value, (P/L)*. OCD spectra showed that the helical peptides are oriented parallel to the bilayers as long as P/L < (P/L)*, but as P/L increases over (P/L)*, an increasing fraction of peptides changed orientation to become perpendicular to the bilayer. We analyzed the data by assuming an internal membrane tension associated with the membrane thinning. The free energy containing this tension term leads to a relation explaining the P/L-dependence observed in the OCD and X-ray diffraction measurements. We extracted the experimental parameters from this thermodynamic relation. We believe that they are the quantities that characterize the peptide-lipid interactions related to the mechanism of pore formation. We discuss the meaning of these parameters and compare their values for different lipids and for the two different types of pores. These experimental parameters are useful for further molecular analysis and are excellent targets for molecular dynamic simulation studies.     

Cytoplasmic domain of zebrafish myelin protein zero: adhesive role depends on beta-conformation

Solution spectroscopy studies on the cytoplasmic domain of human myelin protein zero (P0) (hP0-cyt) suggest that H-bonding between beta-strands from apposed molecules is likely responsible for the tight cytoplasmic apposition in compact myelin. As a follow-up to these findings, in the current study we used circular dichroism and x-ray diffraction to analyze the same type of model membranes previously used for hP0-cyt to investigate the molecular mechanism underlying the zebrafish cytoplasmic apposition. This space is significantly narrower in teleosts compared with that in higher vertebrates, and can be accounted for in part by the much shorter cytoplasmic domain in the zebrafish protein (zP0-cyt). Circular dichroism measurements on zP0-cyt showed similar structural characteristics to those of hP0-cyt, i.e., the protein underwent a beta-->alpha structural transition at lipid/protein (L/P) molar ratios >50, and adopted a beta-conformation at lower L/P molar ratios. X-ray diffraction was carried out on lipid vesicle solutions with zP0-cyt before and after dehydration to study the effect of protein on membrane lipid packing. Solution diffraction revealed the electron-density profile of a single membrane bilayer. Diffraction patterns of dried samples suggested a multilamellar structure with the beta-folded P0-cyt located at the intermembrane space. Our findings support the idea that the adhesive role of P0 at the cytoplasmic apposition in compact myelin depends on the cytoplasmic domain of P0 being in the beta-conformation.     

Viral ion channel proteins in model membranes: a comparative study by X-ray reflectivity

We have investigated the effect of the transmembrane domain of three viral ion channel proteins on the lipid bilayer structure by X-ray reflectivity and scattering from oriented planar bilayers. The proteins show a similar effect on the lipid bilayer structural parameters: an increase in the lipid bilayer hydrophobic core, a decrease in the amplitude of the vertical density profile and a systematic change in the ordering of the acyl chains as a function of protein-to-lipid ratio. These results are discussed in a comparative view.     

Peptide model helices in lipid membranes: insertion,positioning, and lipid response on aggregation studied by X-ray scattering

Studying membrane active peptides or protein fragments within the lipid bilayer environment is particularly challenging in the case of synthetically modified, labeled, artificial, or recently discovered native structures. For such samples the localization and orientation of the molecular species or probe within the lipid bilayer environment is the focus of research prior to an evaluation of their dynamic or mechanistic behavior. X-ray scattering is a powerful method to study peptide/lipid interactions in the fluid, fully hydrated state of a lipid bilayer. For one, the lipid response can be revealed by observing membrane thickening and thinning as well as packing in the membrane plane; at the same time, the distinct positions of peptide moieties within lipid membranes can be elucidated at resolutions of up to several angstroms by applying heavy-atom labeling techniques. In this study, we describe a generally applicable X-ray scattering approach that provides robust and quantitative information about peptide insertion and localization as well as peptide/lipid interaction within highly oriented, hydrated multilamellar membrane stacks. To this end, we have studied an artificial, designed β-helical peptide motif in its homodimeric and hairpin variants adopting different states of oligomerization. These peptide lipid complexes were analyzed by grazing incidence diffraction (GID) to monitor changes in the lateral lipid packing and ordering. In addition, we have applied anomalous reflectivity using synchrotron radiation as well as in-house X-ray reflectivity in combination with iodine-labeling in order to determine the electron density distribution ρ(z) along the membrane normal (z axis), and thereby reveal the hydrophobic mismatch situation as well as the position of certain amino acid side chains within the lipid bilayer. In the case of multiple labeling, the latter technique is not only applicable to demonstrate the peptide’s reconstitution but also to generate evidence about the relative peptide orientation with respect to the lipid bilayer.     

Acidic interaction of the colicin A pore-forming domain with model membranes of Escherichia coli lipids results in a large perturbation of acyl chain order and stabilization of the bilayer.

2H and 31P NMR techniques were used to study the effects on acyl chain order and lipid organization of the well-characterized pore-forming domain of colicin A (20-kDa thermolytic fragment of colicin A) upon insertion in model membrane systems derived from the Escherichia coli fatty acid auxotrophic strain K 1059, which was grown in the presence of [11,11-2H2]-labeled oleic acid. Addition of the protein to dispersions of the E. coli total lipid extract, in a 1/70 molar ratio of peptide to lipids, resulted in a large pH-dependent decrease in quadrupolar splitting of the 2H NMR spectra. The decrease of the quadrupolar splitting obtained at the various pH values was correlated with the pH dependence of the insertion of the protein in monolayer films using the same E. coli lipid extracts. The pK governing the perturbing effects on the order of the fatty acyl chains was around 5, in agreement with the values of the pH-dependent conformational changes of the pore-forming domain of colicin A required for membrane insertion as reported by van der Goot et al. [(1991) Nature 354, 408-410]. 31P NMR measurements show that the bilayer organization remains intact upon addition of the protein to dispersions of lipid extract. Surprisingly, 31P NMR measurements as a function of temperature indicate that the pore-forming domain of colicin A even stabilizes bilayer lipid structure at pH 4. Both the large effect of the protein on acyl chain order and its bilayer-stabilizing activity are indicative of a surface localization of the protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Comparison of the profile structures of isolated and reconstituted sarcoplasmic reticulum membranes

The profile structures of functional reconstituted sarcoplasmic reticulum (RSR) membranes were investigated as a function of the lipid/protein (L/P) ratio via x-ray diffraction studies of hydrated oriented multilayers of these membranes to a resolution of 10-15 A, and neutron diffraction studies on these multilayers to lower resolutions. Our results at this stage of investigation indicate that reconstitution of SR with variable amounts of Ca2+ pump protein for L/P ratios greater than 88 results in closed membraneous vesicles in which the Ca2+ pump protein is distributed asymmetrically in the membrane profile; a majority of the protein density is contained primarily in the extravesicular half of the membrane profile whereas a relatively lesser portion of the protein spans the hydrocarbon core of the RSR membranes. These RSR membranes are functionally similar and resemble isolated light sarcoplasmic reticulum in both profile structure and function at a comparable L/P ratio. Reconstitution with greater amounts of Ca2+ pump protein (e. g. L/P approximately 50-60) resulted in substantially less functional membranes with a dramatically thicker profile structure.     

P-31 nuclear magnetic resonance studies of the appearance of an isotropic component in dielaidoylphosphatidylethanolamine.

We have utilized phosphorus nuclear magnetic resonance, which provides an excellent means of characterizing the physical state of lipids, to investigate the polymorphic phase behavior of pure dielaidoylphosphatidylethanolamine (DEPE). We have observed a sharp isotropic component in the typical bilayer and inverted hexagonal P-31 NMR spectra. This component appears in the spectra of both the bilayer and inverted hexagonal lipid phases after several cycles through the bilayer-to-hexagonal phase transition. The magnitude of the isotropic component increased as a function of the number of cycles through the transition. The appearance of this component was not a function of time at constant temperature, but only a function of the number of cycles through the transition. The isotropic component is stable at all temperatures above the gel-to-liquid crystal transition, but it abruptly disappears when the lipid is cooled below the gel-to-liquid crystal phase transition. It is suggested that this isotropic phase is similar to the isotropic phase observed in dioleoylphosphatidylethanolamine (DOPE) by x-ray diffraction and identified as a cubic phase (Shyamsunder, E., S. M. Gruner, M. W. Tate, D. C. Turner, P. T. C. So, and C. P. S. Tilcock. 1988. Biochemistry. 27:2332-2336).     

Studies on the aggregation and possible channel formation in membranes of a cyclic hexapeptide, cyclo (D-Ala-L-Pro-L-Ala)2.

The interaction of zwitterionic lipid DMPC and DPPC with cyclic hexapeptide, cyclo (D-Ala-L-Pro-L-Ala)2 was studied using circular dichroism (CD) and differential scanning calorimetry (DSC). Preliminary membrane conductance results showed that the peptide has a tendency to form channels inside the lipid bilayer. CD studies indicated that as the lipid/peptide (L/P) ratio (DMPC/peptide) was increased, the magnitude of the negative CD band having a lambda(max) around 200 nm decreased. At a L/P ratio of 210:1, this band disappeared completely, indicating dramatic conformational changes in the peptide on interaction with the lipid bilayer. Reduction of the phase transition temperature and the maximum heat capacity of the lipid bilayer (DPPC) for gel-to-liquid crystalline phase transition indicates a strong interaction of the peptide with the lipid bilayer.     

Regulation of the gating of BKCa channel by lipid bilayer thickness

Transmembrane segments of ion channels tend to match the hydrophobic thickness of lipid bilayers to minimize mismatch energy and to maintain their proper organization and function. To probe how ion channels respond to mismatch with lipid bilayers of different thicknesses, we examined the single channel activities of BK(Ca) (hSlo alpha-subunit) channels in planar bilayers of binary mixtures of DOPE (1,2-dioleoyl-sn-glycero-3-phosphoethanolamine) with phosphatidylcholines (PCs) of varying chain lengths, including PC 14:1, PC 18:1, PC 22:1, PC 24:1, and with porcine brain sphingomyelin. Bilayer thickness and structure was measured with small angle x-ray diffraction and atomic force microscopy. The open probability (P(o)) of the BK(Ca) channel was finely tuned by bilayer thickness, first decreasing with increases in bilayer thickness from PC 14:1 to PC 22:1 and then increasing from PC 22:1 to PC 24:1 and to porcine brain sphingomyelin. Single channel kinetic analyses revealed that the mean open time of the channel increased monotonically with bilayer thickness and, therefore, could not account for the biphasic changes in P(o). The mean closed time increased with bilayer thickness from PC 14:1 up to PC 22:1 and then decreased with further increases in bilayer thickness to PC 24:1 and sphingomyelin, correlating with changes in P(o). This is consistent with the proposition that bilayer thickness affects channel activity mainly through altering the stability of the closed state. We suggest a simple mechanical model that combines forces of lateral stress within the lipid bilayer with local hydrophobic mismatch between lipids and the protein to account for the biphasic modulation of BK(Ca) gating.     

Membrane-thinning effect of curcumin

Interaction of curcumin with lipid bilayers is not well understood. A recent experiment showed that curcumin significantly affected the single-channel lifetime of gramicidin in a 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) bilayer without affecting its single-channel conductance. We performed two experiments to understand this result. By isothermal titration calorimetry, we measured the partition coefficient of curcumin binding to DOPC bilayers. By x-ray lamellar diffraction, we measured the thickness change of DOPC bilayers as a function of the curcumin/lipid ratio. A nonlinear membrane-thinning effect by curcumin was discovered. The gramicidin data were qualitatively interpreted by the combination of isothermal titration calorimetry and x-ray results. We show that not only does curcumin thin the lipid bilayer, it might also weaken its elasticity moduli. The result implies that curcumin may affect the function of membrane proteins by modifying the properties of the host membrane.     

Preparation of reconstituted acetylcholine receptor membranes suitable for AFM imaging of lipid–protein interactions

The nicotinic acetylcholine receptor (nAChR) has been reconstituted in POPC vesicles at high lipid–protein (L/P) ratios for the preparation of supported lipid bilayers with a low protein density for studies of protein–lipid interactions using atomic force microscopy (AFM). Initial reconstitutions using a standard dialysis method with bulk L/P ratios ranging from 20:1 to 100:1 (w/w) gave heterogeneous samples that contained both empty vesicles and proteoliposomes with a range of L/P ratios. This is problematic because empty vesicles adsorb and rupture to form bilayer patches more rapidly than do protein-rich vesicles, resulting in the loss of protein during sample washing. Although it was not possible to find reconstitution conditions that gave homogeneous populations of vesicles with high L/P ratios, an additional freeze–thaw cycle immediately after dialysis did reproducibly yield a fraction of proteoliposomes with L/P ratios above 100:1. These proteoliposomes were separated by sucrose gradient centrifugation and used to prepare supported bilayers with well-separated individual receptors and minimal adsorbed proteoliposomes. AFM images of such samples showed many small features protruding from the bilayer surface. These features range in height from 1 to 5 nm, consistent with the smaller intracellular domain of the protein exposed, and have lateral dimensions consistent with an individual receptor. Some bilayers with reconstituted protein also had a small fraction of higher features that are assigned to nAChR with the larger extracellular domain exposed and showed evidence for aggregation to give dimers or small oligomers. This work demonstrates the importance of using highly purified reconstituted membranes with uniform lipid–protein ratios for AFM studies of integral membrane protein–lipid interactions.     

Simulation studies of protein-induced bilayer deformations, and lipid-induced protein tilting, on a mesoscopic model for lipid bilayers with embedded proteins

Biological membranes are complex and highly cooperative structures. To relate biomembrane structure to their biological function it is often necessary to consider simpler systems. Lipid bilayers composed of one or two lipid species, and with embedded proteins, provide a model system for biological membranes. Here we present a mesoscopic model for lipid bilayers with embedded proteins, which we have studied with the help of the dissipative particle dynamics simulation technique. Because hydrophobic matching is believed to be one of the main physical mechanisms regulating lipid-protein interactions in membranes, we considered proteins of different hydrophobic length (as well as different sizes). We studied the cooperative behavior of the lipid-protein system at mesoscopic time- and lengthscales. In particular, we correlated in a systematic way the protein-induced bilayer perturbation, and the lipid-induced protein tilt, with the hydrophobic mismatch (positive and negative) between the protein hydrophobic length and the pure lipid bilayer hydrophobic thickness. The protein-induced bilayer perturbation was quantified in terms of a coherence length, xi(P), of the lipid bilayer hydrophobic thickness profile around the protein. The dependence on temperature of xi(P), and the protein tilt-angle, were studied above the main-transition temperature of the pure system, i.e., in the fluid phase. We found that xi(P) depends on mismatch, i.e., the higher the mismatch is, the longer xi(P) becomes, at least for positive values of mismatch; a dependence on the protein size appears as well. In the case of large model proteins experiencing extreme mismatch conditions, in the region next to the so-called lipid annulus, there appears an undershooting (or overshooting) region where the bilayer hydrophobic thickness is locally lower (or higher) than in the unperturbed bilayer, depending on whether the protein hydrophobic length is longer (or shorter) than the pure lipid bilayer hydrophobic thickness. Proteins may tilt when embedded in a too-thin bilayer. Our simulation data suggest that, when the embedded protein has a small size, the main mechanism to compensate for a large hydrophobic mismatch is the tilt, whereas large proteins react to negative mismatch by causing an increase of the hydrophobic thickness of the nearby bilayer. Furthermore, for the case of small, peptidelike proteins, we found the same type of functional dependence of the protein tilt-angle on mismatch, as was recently detected by fluorescence spectroscopy measurements.     

Ca2+-dependent mechanism of membrane insertion and destabilization by the SARS-CoV-2 fusion peptide

Cell penetration after recognition of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus by the ACE2 receptor and the fusion of its viral envelope membrane with cellular membranes are the early steps of infectivity. A region of the Spike protein of the virus, identified as the “fusion peptide” (FP), is liberated at its N-terminal site by a specific cleavage occurring in concert with the interaction of the receptor-binding domain of the Spike. Studies have shown that penetration is enhanced by the required binding of Ca²⁺ ions to the FPs of coronaviruses, but the mechanisms of membrane insertion and destabilization remain unclear. We have predicted the preferred positions of Ca²⁺ binding to the SARS-CoV-2-FP, the role of Ca²⁺ ions in mediating peptide-membrane interactions, the preferred mode of insertion of the Ca²⁺-bound SARS-CoV-2-FP, and consequent effects on the lipid bilayer from extensive atomistic molecular dynamics simulations and trajectory analyses. In a systematic sampling of the interactions of the Ca²⁺-bound peptide models with lipid membranes, SARS-CoV-2-FP penetrated the bilayer and disrupted its organization only in two modes involving different structural domains. In one, the hydrophobic residues F833/I834 from the middle region of the peptide are inserted. In the other, more prevalent mode, the penetration involves residues L822/F823 from the LLF motif, which is conserved in CoV-2-like viruses, and is achieved by the binding of Ca²⁺ ions to the D830/D839 and E819/D820 residue pairs. FP penetration is shown to modify the molecular organization in specific areas of the bilayer, and the extent of membrane binding of the SARS-CoV-2 FP is significantly reduced in the absence of Ca²⁺ ions. These findings provide novel mechanistic insights regarding the role of Ca²⁺ in mediating SARS-CoV-2 fusion and provide a detailed structural platform to aid the ongoing efforts in rational design of compounds to inhibit SARS-CoV-2 cell entry.     

Structure of a fluid dioleoylphosphatidylcholine bilayer determined by joint refinement of x-ray and neutron diffraction data. II. Distribution and packing of terminal methyl groups.

We continue in this paper the presentation of theoretical and experimental methods for the joint refinement of neutron and x-ray lamellar diffraction data for the analysis of fluid (L alpha phase) bilayer structure (Wiener, M. C., and S. H. White. 1991 a, b, c. Biophys. J. 59:162-173 and 174-185; Biochemistry. 30:6997-7008; Wiener, M. C., G. I. King, and S. H. White. Biophys. J. 60: 568-576). We show how to obtain the distribution and packing of the terminal methyls in the interior of a fluid dioleoylphosphatidylcholine bilayer (66% RH) by combining x-ray and neutron scattering-length transbilayer profiles with no a priori assumptions about the functional form of the distribution. We find that the methyls can be represented by a Gaussian function with 1/e-halfwidth of 2.95 +/- 0.28 A situated at the bilayer center. There is substantial mixing of the methyls and methylenes in the bilayer center. The Gaussian representation of the methyl distribution is narrower and has a different shape than predicted by several simulations of fluid bilayers (Gruen, D. W. R., and E. H. B. de Lacey. 1984. Surfactants in Solution, Vol. 1. Plenum Publishing Corp., New York. 279-306; de Loof, H., et al. 1991. Biochemistry. 30:2099-2133) but this may be due to the smaller area/lipid of our experiments and the presence of the double-bonds. Determination of the absolute specific volume of DOPC and an analysis of bulk alkane volumetric data over a range of hydrostatic pressures lead to estimates of methylene and methyl volumes at the bilayer center of 27 +/- 1 A3 and 57.2 +/- 3.6 A3, respectively. This result provides direct confirmation of the common assumption that the molecular packing of methyl and methylene groups in bilayers is the same as in bulk liquid alkanes.