The relaxin peptide family and their novel G-protein coupled receptors

Relaxin-1 is a heterodimeric peptide hormone primarily produced by the pregnant corpus luteum and/or placenta and is involved in many essential physiological processes centered on its action as a potent extracellular matrix (ECM) remodeling agent. Insulin-like peptide 3 (INSL3), also known as relaxin-like factor, is predominantly expressed in the Leydig cells of the testes and is an important mediator of testicular descent. The relaxin-1 equivalent peptide in humans is actually the product of the human RLN2 gene, human 2 (H2) relaxin. Recently identified and thought to be the ancestral relaxin, relaxin-3 is specifically expressed in the nucleus incertus of the mouse and rat brain and is most likely an important neuropeptide. Each of the hormones above act on cell membrane G-protein coupled receptors (GPCRs). The relaxin-1 receptor is leucine-rich repeat-containing GPCR 7 (LGR7) whereas INSL3 acts on the closely related LGR8. These receptors have large extra-cellular domains containing multiple leucine-rich repeats (LRRs) and a unique LDL receptor-like cysteine-rich motif (LDLR-domain). Relaxin-3 will bind and activate LGR7 with 50-fold lower activity than H2 relaxin. Two relaxin-3 selective GPCRs; somatostatin and angiotensin like peptide receptor (SALPR) and GPCR 142 were recently identified, these type I GPCRs are unrelated to LGR7 and LGR8. The discovery and characterisation of these receptors is greatly aiding the quest to unravel the mechanics of these important hormones, however with three other family members, insulin-like peptides 4–6 (INSL4, INSL5 and INSL6) with unknown functions and unidentified receptors, there is still much to be learnt about this hormone family.     

Design, synthesis and pharmacological evaluation of cyclic mimetics of the insulin-like peptide 3 (INSL3) B-chain.

Insulin-like peptide 3 (INSL3) is a peptide hormone belonging to the relaxin-insulin superfamily of peptides that plays important roles in testes descent, oocyte maturation and the control of male germ cell apoptosis. These actions are mediated via a specific G-protein coupled receptor, LGR8. Previous structure-activity studies have shown that the key binding site of INSL3 is situated within its B-chain. Recent studies in our laboratory have led to the identification of a cyclic peptide mimetic 2 of the INSL3 B-chain, which we have shown to compete with the binding of [33P]-relaxin to LGR8 expressed in HEK293T cells, and to inhibit cAMP-mediated signaling in these cells, i.e. it is an antagonist of INSL3. In order to further define the structure-activity relationships of cyclic analogues of the INSL3 B-chain, we used a structure-based approach to design a series of cyclic, disulfide-constrained INSL3 B-chain mimetics. To do this, we first created a model of the 3D structure of INSL3 using the crystal structure of human relaxin as a template. This model of INSL3 was then used as a template to design a series of disulfide-constrained mimetics of the INSL3 B-chain. The peptides were synthesized by solid-phase peptide synthesis using pseudoproline dipeptides to improve the synthesis outcome. Of the seven prepared INSL3 B-chain mimetics, three compounds were found to have partial displacement activity, while four were able to completely displace [33P]-relaxin from LGR8, including compounds that were markedly shorter than compound 2. The best of these, mimetic 6, showed significantly greater affinity for LGR8 than compound 2, but still displayed around 1000-fold less affinity for LGR8 than native INSL3. Analysis of selected mimetics for their alpha-helical content using circular dichroism (CD) spectroscopy revealed that, generally, the mimetics showed less than expected helicity. The inability of the compounds to display true native INSL3 structure is likely contributing to their reduced receptor binding affinity. We are currently examining alternative INSL3 B-chain mimetics that might better present key receptor binding residues in the native INSL3-like conformation.     

Hydrocarbon stapled B chain analogues of relaxin-3 retain biological activity

Relaxin-3 or insulin-like peptide 7 (INSL7) is the most recently discovered relaxin/insulin-like family peptide. Mature relaxin-3 consists of an A chain and a B chain held by disulphide bonds. According to structure activity relationship studies, the relaxin-3 B chain is more important in binding and activating the receptor. RXFP3 (also known as Relaxin-3 receptor 1, GPCR 135, somatostatin- and angiotensin- like peptide receptor or SALPR) was identified as the cognate receptor for relaxin-3 by expression profiles and binding studies. Recent studies imply roles of this system in mediating stress and anxiety, feeding, metabolism and cognition. Stapling of peptides is a technique used to develop peptide drugs for otherwise undruggable targets. The main advantages of stapling include, increased activity due to reduced proteolysis, increased affinity to receptors and increased cell permeability. Stable agonists and antagonists of RXFP3 are crucial for understanding the physiological significance of this system. So far, agonists and antagonists of RXFP3 are peptides. In this study, for the first time, we have introduced stapling of the relaxin-3 B chain at 14th and 18th positions (14s18) and 18th and 22nd position (18s22). These stapled peptides showed greater helicity than the unstapled relaxin-3 B chain in circular dichroism analysis. Both stapled peptides bound RXFP3 and activated RXFP3 as observed in an inhibition of forskolin-induced cAMP assay and a ERK1/2 activation assay, although with different potencies. Therefore, we conclude that stapling of the relaxin3 B chain does not compromise its ability to activate RXFP3 and is a promising method for developing stable peptide agonists and antagonists of RXFP3 to aid relaxin-3/RXFP3 research.     

Peptide synthesis containing a B-cell and a T-cell epitope on dextran beads and evaluation of humoral response against bead-peptide construct

Cross-linked dextran beads were chemically modified withFmoc-Ala to give an amino functionalized support suitablefor solid-phase peptide synthesis. On this support, apeptide comprising B-cell and T-cell epitopes in tandem wassynthesized manually by Fmoc procedure monitoring thecoupling reaction by bromophenol blue procedure andstandard Kaiser test. The quality of peptide synthesis wasverified by RP-HPLC and mass spectrometry. The size andmorphologic characteristics of dextran beads were conservedafter peptide synthesis. Furthermore, we analyzedimmunogenicity in mice of the T-B peptide on dextran beadscompared with T-B peptide immunogenicity when administeredin CFA/IFA. In both cases, titers were high and there wasnot a significant difference in antibody titers betweengroups (p<0.05). But in contrast CFA they are biocompatibleand did not induce any adverse reaction at the site ofinjection. This experiment suggests that the peptidessynthesis on dextran beads can be used to raise theimmunogenicity of synthetic peptide in vaccines ortherapeutics.     

Peptide synthesis containing a B-cell and a T-cell epitope on dextran beads and evaluation of humoral response against bead-peptide construct

Summary Cross-linked dextran beads were chemically modified with Fmoc-βAla to give an amino functionalized support suitable for solid-phase peptide synthesis. On this support, a peptide compriising B-cell and T-cell epitopes in tandem was synthesized manually by Fmoc procedure monitoring the coupling reaction by bromophenol blue procedure and standard Kaiser test. The quality of peptide synthesis was verified by RP-HPLC and mass spectrometry. The size and morphologic characteristics of dextran beads were conserved after peptide synthesis. Furthermore, we analyzed immunogenicity in mice of the T-B peptide on dextran beads compared with T-B peptide immunogenicity when administered in CFA/IFA. In both cases, titers were high and there was not a significant difference in antibody titers between groups (p<0.05). But in contrast CFA they are biocompatible and did not induce any adverse reaction at the site of injection. This experiment suggests that the peptides synthesis on dextran beads can be used to raise the immunogenicity of synthetic peptide in vaccines or therapeutics.     

Chemical synthesis and biological activity of rat INSL3.

The recently identified protein, insulin 3 (INSL3), has structural features that make it a bona fide member of the insulin superfamily. Its predicted amino acid sequence contains the classic two-peptide chain (A- and B-) structure with conserved cysteine residues that results in a disulphide bond disposition identical to that of insulin. Recently, the generation of insl3 knockout mice has demonstrated that testicular descent is blocked due to the failure of a specific ligament, the gubernaculum, to develop. The mechanism by which INSL3 exerts its action on the gubernaculum is currently unknown. The purpose of this study was to, for the first time, synthesize rat INSL3 and test its action on organ cultures of foetal rat gubernaculum. INSL3 also contains a cassette of residues Arg-X-X-X-Arg within the B-chain, a motif that is essential for characteristic activity of another related member of the superfamily, relaxin. Hence, the relaxin activity of rat INSL3 was also tested in two different relaxin bioassays. The primary structure of rat INSL3 was determined by deduction from its cDNA sequence and successfully prepared by solid phase peptide synthesis of the two constituent chains followed by their combination in solution. Following confirmation of its chemical integrity by a variety of analytical techniques, circular dichroism spectroscopy confirmed the presence of high beta-turn and alpha-helical content, with a remarkable spectral similarity to the synthetic ovine INSL3 peptide and to synthetic rat relaxin. The synthetic rat INSL3 bound with very low affinity to rat relaxin receptors and had no activity in a relaxin bioassay. Furthermore, it did not augment or antagonize relaxin activity. The rat INSL3 did however induce growth of foetal rat gubernaculum in whole organ cultures demonstrating that INSL3 has a direct action on this structure.     

Chemical synthesis and structural characterization of the RGD-protein decorsin: a potent inhibitor of platelet aggregation.

Decorsin is a 39-residue RGD-protein crosslinked by three disulfide bridges isolated from the leech Macrobdella decora belonging to the family of GPIIb-IIIa antagonists and acting as a potent inhibitor of platelet aggregation. Here we report the solid-phase synthesis of decorsin using the Fmoc strategy. The crude polypeptide was purified by reverse-phase HPLC in its reduced form and allowed to refold in the presence of glutathione. The homogeneity of the synthetic oxidized decorsin was established by reverse-phase HPLC and capillary zone electrophoresis. The results of amino acid analysis after acid hydrolysis of the synthetic protein, NH2-terminal sequencing and mass determination (4,377 Da) by electrospray mass spectrometry were in full agreement with this theory. The correct pairing of the three disulfide bridges in synthetic decorsin was determined by a combined approach of both peptide mapping using proteolytic enzymes and analysis of the disulfide chirality by CD spectroscopy in the near-UV region. Synthetic decorsin inhibited human platelet aggregation with an IC50 of approximately 0.1 microM, a figure quite similar to that determined utilizing decorsin from natural source. In particular, the synthetic protein was 2,000-fold more potent than a model RGD-peptide (e.g., Arg-Gly-Asp-Ser) in inhibiting platelet aggregation. Thermal denaturation experiments of synthetic decorsin, monitored by CD spectroscopy, revealed its high thermal stability (Tm approximately 74 degrees C). The features of the oxidative refolding process of reduced decorsin, as well as the thermal stability of the oxidized species, were compared with those previously determined for the NH2-terminal core domain fragment 1-41 or 1-43 from hirudin. This fragment shows similarity in size, pairing of the three disulfides and three-dimensional structure with those of decorsin, even if very low sequence similarity. It is suggested that the less efficient oxidative folding and the enhanced thermal stability of decorsin in respect to those of hirudin core domain likely can be ascribed to the presence of the six Pro residues in the decorsin chain, whereas none is present in the hirudin domain. The results of this study indicate that decorsin can be obtained by solid-phase methodology in purity and quantities suitable for structural and functional studies and thus open the way to prepare by chemical methods novel decorsin derivatives containing unusual amino acids or even non-peptidic moieties.     

Novel glycosylated [Lys(7)]-dermorphin analogues: synthesis, biological activity and conformational investigations.

Syntheses of the [Lys(7)]- and [Hyp(6),Lys(7)]-dermorphin analogues in which either Tyr(5) or Hyp(6) are O-glucosylated are described. For comparison, the carbohydrate-free peptides have also been prepared. Structural investigations by FT-IR and CD measurements were carried out on the synthetic analogues and some preliminary pharmacological experiments were also performed.The biological potency of the glucosylated analogues was compared with that of the micro-opioid receptor agonist dermorphin in GPI preparations. Glucosylation of either Tyr(5) or Hyp(6) reduces the potency of both [Lys(7)]-dermorphin and [Hyp(6),Lys(7)]-dermorphin. The effect induced by the Tyr(5) glucosylation is quite strong and the potency of both peptides is reduced by about 150 times. A similar but less dramatic effect is induced by the glucosylation of the Hyp(6) residue, and the potency of the parent peptide is reduced by about 15 times. The presence of acetyl groups on the sugar hydroxyl functions further reduces the agonistic potency of the glucosylated analogues. The analgesic potency of [Hyp(6),Lys(7)]-, [Hyp(betaGlc)(6),Lys(7)]- and [Tyr(betaGlc)(5),Lys(7)]-dermorphin were also tested in vivo by the tail-flick test. The glucosylated hydroxyproline-containing analogue is 8-10 times less active than the parent peptide, but its analgesic effect lasts significantly longer.     

D-Ala2]-Deltorphin I peptoid and retropeptoid analogues: synthesis, biological activity and conformational investigations.

The synthesis is described of a [D-Ala2]-deltorphin I peptoid analogue in which all amino acid residues have been substituted by the corresponding N-alkylglycine residues. The [D-Ala2]-deltorphin I retropeptoid was also prepared as well as [Ala1 ,D-Ala2]-deltorphin 1 and the corresponding peptoid. Structural investigations by FT-IR and fluorescence measurements were carried out on the synthetic analogues and on some [D-Ala2]-deltorphin 1 peptide-peptoid hybrids previously prepared. According to the fluorescence measurements the distance between the aromatic residues in the deltorphin I peptoid and retropeptoid is similar to that suggested for the delta- and micro-opioids, respectively. Measurements of CD in the presence of beta-cyclodextrin, and some preliminary pharmacological experiments were also performed. No dichroic bands are present in the spectrum of the [Ntyr1,D-Ala2]-deltorphin I, but an increasing dichroic effect appears in the spectra of both the deltorphin I peptoid and retropeptoid. Activity tests on isolated organ preparations showed that the modifications made produced a dramatic decrease in the agonistic activity of the synthetic derivatives.     

Mechanical properties of lipid bilayers and regulation of mechanosensitive function: From biological to biomimetic channels

Material properties of lipid bilayers, including thickness, intrinsic curvature and compressibility regulate the function of mechanosensitive (MS) channels. This regulation is dependent on phospholipid composition, lateral packing and organization within the membrane. Therefore, a more complete framework to understand the functioning of MS channels requires insights into bilayer structure, thermodynamics and phospholipid structure, as well as lipid-protein interactions. Phospholipids and MS channels interact with each other mainly through electrostatic forces and hydrophobic matching, which are also crucial for antimicrobial peptides. They are excellent models for studying the formation and stabilization of membrane pores. Importantly, they perform equivalent responses as MS channels: (1) tilting in response to tension and (2) dissipation of osmotic gradients. Lessons learned from pore forming peptides could enrich our knowledge of mechanisms of action and evolution of these channels. Here, the current state of the art is presented and general principles of membrane regulation of mechanosensitive function are discussed.     

Direct evidence for the function of crustacean insulin-like androgenic gland factor (IAG): Total chemical synthesis of IAG

Insulin-like androgenic gland factor (IAG) is presumed to be a sex differentiation factor so-called androgenic gland hormone (AGH) in decapod crustacean, although the function of IAG peptide has not yet been reported. In this study, we synthesized IAG from the prawn, Marsupenaeus japonicus, and its function was assessed by an in vitro bioassay. As a result, IAG with the insulin-type disulfide bond arrangement showed biological activity, whereas its disulfide isomer did not. These results strongly suggest that the native IAG peptide has an insulin-type disulfide, and it is the decapod AGH.     

Efficient synthesis of polypeptide‐α‐thioester by the method combining polypeptide expression and chemical activation for the semi‐synthesis of interferon‐γ having oligosaccharides

In order to synthesize interferon‐γ glycoform having an oligosaccharide at the 97 position by a semi‐synthetic method, interferon‐γ‐polypeptide‐(1–94)‐α‐hydrazide was prepared by the specific Cys‐cyanylation of polypeptide‐(1–94)‐Cys‐His₆ expressed from E. coli and subsequent hydrazinolysis in 22% yield (two steps). This polypeptide‐α‐hydrazide was then converted into corresponding polypeptide‐α‐thioester under NaNO₂/acid conditions followed by thiolysis in 83% yield. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

α-Hydroxymethylserine as a peptide building block: synthetic and structural aspects

A synthetic methodology has been developed for peptide bond formation with α-hydroxmethylserine as the carboxyl or amino component and also for the preparation of homo-sequences. The key intermediate, O,O-protected α-hydroxymethylserine in the form of an isopropylidene derivative, is easily accessible and represents the first example of a heterocyclic C^α,α-disubstituted amino acid containing an 1,3-dioxane ring. The use of this intermediate facilitates protection of the sterically hindered amino and carboxyl groups and is advantageous for the coupling and deprotection steps. X-ray structure determination of Z-HmS(Ipr)–Ala–OMe revealed that the two crystallographically independent molecules present in the asymmetric unit adopt an S-shaped conformation. In the one molecule the achiral HmS(Ipr) residue has the torsion angle values (ϕ==61.4°,ψ=40.8°) in the left-handed helical region of the Ramachandran map, while in the second molecule the negative torsion angles (ϕ=−60.1°, ψ=–44.4°) are associated with the right-handed helix. © 1998 European Peptide Society and John Wiley & Sons, Ltd.     

First chemical synthesis of a scorpion alpha-toxin affecting sodium channels: the Aah I toxin of Androctonus australis hector.

Aah I is a 63-residue alpha-toxin isolated from the venom of the Buthidae scorpion Androctonus australis hector, which is considered to be the most dangerous species. We report here the first chemical synthesis of Aah I by the solid-phase method, using a Fmoc strategy. The synthetic toxin I (sAah I) was renatured in DMSO-Tris buffer, purified and subjected to thorough analysis and comparison with the natural toxin. The sAah I showed physico-chemical (CD spectrum, molecular mass, HPLC elution), biochemical (amino-acid composition, sequence), immunochemical and pharmacological properties similar to those of the natural toxin. The synthetic toxin was recognized by a conformation-dependent monoclonal anti-Aah I antibody, with an IC50 value close to that for the natural toxin. Following intracerebroventricular injection, the synthetic and the natural toxins were similarly lethal to mice. In voltage-clamp experiments, Na(v) 1.2 sodium channel inactivation was inhibited by the application of sAah I or of the natural toxin in a similar way. This work describes a simple protocol for the chemical synthesis of a scorpion alpha-toxin, making it possible to produce structural analogues in time.     

Fmoc‐based peptide thioester synthesis with self‐purifying effect: heading to native chemical ligation in parallel formats

The chemical synthesis of proteins has facilitated functional studies of proteins due to the site‐specific incorporation of post‐translational modifications, labels, and non‐proteinogenic amino acids. Moreover, native chemical ligation provides facile access to proteins by chemical means. However, the application of the native chemical ligation reaction in the synthesis of parallel formats such as protein arrays has been complicated because of the often cumbersome and time‐consuming synthesis of the required peptide thioesters. An Fmoc‐based peptide thioester synthesis with self‐purification on the sulfonamide ‘safety‐catch’ linker widens this bottleneck because HPLC purification can be avoided. The method is based on an on‐resin cyclization–thiolysis reaction sequence. A macrocyclization via the N‐terminus of the full‐length peptide followed by a thiolytic C‐terminal ring opening allows selective detachment of the truncation products and the full‐length peptide. A brief overview of the chemical aspects of this method is provided including the optimization steps and the automation process. Furthermore, the application of the cyclization–thiolysis approach combined with the native chemical ligation reaction in the parallel synthesis of a library of 16 SH3‐domain variants of SHO1 in yeast is described, demonstrating the value of this new technique for the chemical synthesis of protein arrays. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Uncoupled IP3 receptor can function as a Ca2+-leak channel: cell biological and pathological consequences

Ca(2+) release via intracellular release channels, IP(3)Rs (inositol 1,4,5-trisphosphate receptors) and RyRs (ryanodine receptors), is perhaps the most ubiquitous and versatile cellular signalling mechanism, and is involved in a vast number of cellular processes. In addition to this classical release pathway there is limited, but yet persistent, information about less well-defined Ca(2+)-leak pathways that may play an important role in the control of the Ca(2+) load of the endo(sarco)plasmic reticulum. The mechanisms responsible for this 'basal' leak are not known, but recent data suggest that both IP(3)Rs and RyRs may also operate as Ca(2+)-leak channels, particularly in pathological conditions. Proteolytic cleavage or biochemical modification (such as hyperphosphorylation or nitrosylation), for example, occurring during conditions of cell stress or apoptosis, can functionally uncouple the cytoplasmic control domains from the channel domain of the receptor. Highly significant information has been obtained from studies of malfunctioning channels in various disorders; for example, RyRs in cardiac malfunction or genetic muscle diseases and IP(3)Rs in neurodegenerative diseases. In this review we aim to summarize the existing information about functionally uncoupled IP(3)R and RyR channels, and to discuss the concept that those channels can participate in Ca(2+)-leak pathways.     

Rapid response of protein synthesis to insulin in 3T3 cells: Effects of protein kinase C depletion and differences from the response to serum repletion

Quiescent 3T3 cells grown in media containing 4% foetal calf serum showed different responses to insulin and to serum repletion (to 12%). Insulin stimulated protein synthesis within 1 h and this early response was insensitive to actinomycin D. The later insulin response showed progressive sensitivity to actinomycin D. The serum response was slower, not occurring until 1 h, and was inhibited by actinomycin D. Depletion of cell protein kinase C by pre-treatment with phorbol ester caused a total block of the immediate response to insulin but had little effect on the response to serum or the later response to insulin. Acute phorbol ester treatment stimulated protein synthesis.     

Preparation of O-phosphotyrosine-containing peptides by Fmoc solid-phase synthesis: Evaluation of several Fmoc-Tyr(PO3R2)-OH derivatives

Summary The synthesis of two model Tyr(P)-containing peptides using Fmoc-Tyr(PO₃ tBu₂)-OH, Fmoc-Tyr(PO₃Bzl₂)-OH and Fmoc-Tyr(PO₃H₂)-OH established that the t-butylphosphate-protected derivative was the preferred derivative for use in Fmoc solid-phase peptide synthesis, since it afforded phosphopeptides in high purity and with the lowest amount of Tyr-peptide contamination. In addition, this study confirmed that commercially available Fmoc-Tyr(PO₃H₂)-OH is also suitable for use in Fmoc solid-phase synthesis but gives less pure phosphopeptides, along with the generation of 1–4% of the tyrosine-containing peptide for the model sequences studied. In view of the good performance of Fmoc-Tyr(PO₃ tBu₂)-OH, a large-scale three-step synthetic procedure was developed which involved phenacyl protection of the carboxyl group, phosphite-triester phosphorylation of the tyrosyl hydroxyl using di-t-butyl N,N-diethylphosphoramidite, and final removal of the phenacyl group by zinc reduction in acetic acid.Abbreviations BOP benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate - tBu t-butyl - Bzl benzyl - DBU 1,8-diazabicyclo[5,4,0]undec-7-ene - DMF N,N-dimethylformamide - EDT ethanedithiol - Fmoc 9-fluorenylmethoxycarbonyl - HOBt N-hydroxybenzotriazole - HPLC high performance liquid chromatography - NMM N-methylmorpholine - Pac phenacyl - TFA trifluoroacetic acid - THF tetrahydrofuran - Tyr(P) O-phosphotyrosine