Cellular protein interactions with herpes simplex virus type 1 oriS.

The herpes simplex virus type 1 (HSV-1) origin of DNA replication, oriS, contains an AT-rich region and three highly homologous sequences, sites I, II, and III, identified as binding sites for the HSV-1 origin-binding protein (OBP). In the present study, interactions between specific oriS DNA sequences and proteins in uninfected cell extracts were characterized. The formation of one predominant protein-DNA complex, M, was demonstrated in gel shift assays following incubation of uninfected cell extracts with site I DNA. The cellular protein(s) that comprises complex M has been designated origin factor I (OF-I). The OF-I binding site was shown to partially overlap the OBP binding site within site I. Complexes with mobilities indistinguishable from that of complex M also formed with site II and III DNAs in gel shift assays. oriS-containing plasmid DNA mutated in the OF-I binding site exhibited reduced replication efficiency in transient assays, demonstrating a role for this site in oriS function. The OF-I binding site is highly homologous to binding sites for the cellular CCAAT DNA-binding proteins. The binding site for the CCAAT protein CP2 was found to compete for OF-I binding to site I DNA. These studies support a model involving the participation of cellular proteins in the initiation of HSV-1 DNA synthesis at oriS.     

Identification of a second DNA binding site in the human Rad52 protein

Rad52 plays essential roles in homology-dependent double-strand break repair. Various studies have established the functions of Rad52 in Rad51-dependent and Rad51-independent repair processes. However, the precise molecular mechanisms of Rad52 in these processes remain unknown. In the present study we have identified a novel DNA binding site within Rad52 by a structure-based alanine scan mutagenesis. This site is closely aligned with the putative single-stranded DNA binding site determined previously. Mutations in this site impaired the ability of the Rad52-single-stranded DNA complex to form a ternary complex with double-stranded DNA and subsequently catalyze the formation of D-loops. We found that Rad52 introduces positive supercoils into double-stranded DNA and that the second DNA binding site is essential for this activity. Our findings suggest that Rad52 aligns two recombining DNA molecules within the first and second DNA binding sites to stimulate the homology search and strand invasion processes.     

Analysis of the herpes simplex virus type 1 OriS sequence: mapping of functional domains.

The herpes simplex virus type 1 (HSV-1) OriS region resides within a 90-bp sequence that contains two binding sites for the origin-binding protein (OBP), designated sites I and II. A third presumptive OBP-binding site (III) within OriS has strong sequence similarity to sites I and II, but no sequence-specific OBP binding has yet been demonstrated at this site. We have generated mutations in sites I, II, and III and determined their replication efficiencies in a transient in vivo assay in the presence of a helper virus. Mutations in any one of the sites reduced DNA replication significantly. To study the role of OriS sequence elements in site I and the presumptive site III in DNA replication, we have also generated a series of mutations that span from site I across the presumptive binding site III. These mutants were tested for their ability to replicate and for the ability to bind OBP by using gel shift analyses. The results indicate that mutations across site I drastically reduce DNA replication. Triple-base-pair substitution mutations that fall within the crucial OBP-binding domain, 5'-YGYTCGCACT-3' (where Y represents C or T), show a reduced level of OBP binding and DNA replication. Substitution mutations in site I that are outside this crucial binding sequence show a more detrimental effect on DNA replication than on OBP binding. This suggests that these sequences are required for initiation of DNA replication but are not critical for OBP binding. Mutations across the presumptive OBP-binding site III also resulted in a loss in efficiency of DNA replication. These mutations influenced OBP binding to OriS in gel shift assays, even though the mutated sequences are not contained within known OBP-binding sites. Replacement of the wild-type site III with a perfect OBP-binding site I results in a drastic reduction of DNA replication. Thus, our DNA replication assays and in vitro DNA-binding studies suggest that the binding of the origin sequence by OBP is not the only determining factor for initiation of DNA replication in vivo.     

p53 binds single-stranded DNA ends through the C-terminal domain and internal DNA segments via the middle domain.

We have previously reported that wild-type p53 can bind single-stranded (ss) DNA ends and catalyze renaturation of ss complementary DNA molecules. Here we demonstrate that p53 can also bind to internal segments of ss DNA molecules via a binding site (internal DNA site) distinct from the binding site for DNA ends (DNA end site). Using p53 deletion mutants, the internal DNA site was mapped to the central region (residues 99-307), while the DNA end site was mapped to the C-terminal domain (residues 320-393) of the p53 protein. The internal DNA site can be activated by the binding of ss DNA ends to the DNA end site. The C-terminal domain alone was sufficient to catalyze DNA renaturation, although the central domain was also involved in promotion of renaturation by the full-length protein. Our results suggest that the interaction of the C-terminal tail of p53 with ss DNA ends generated by DNA damage in vivo may lead to activation of non-specific ss DNA binding by the central domain of p53.     

Studies on the binding of lambda Int protein to attachment site DNA: identification of a tight-binding site in the P'' region.

We have used three approaches to studying the interaction of lambda Int protein with bacteriophage attachment site DNA, POP': location of binding sites by retention of DNA fragments in a filter binding assay, reconstruction of a binding site by DNA synthesis and protection of a binding site from an exonuclease. Retention of restriction fragments on nitrocellulose filters in the presence of Int protein was used to locate binding sites. A high affinity binding site lies in P' between base pairs -6 and +173 from the center of the common core sequence, and low affinity sites are found in the 200 base pair region left of position -6. Reconstruction of the high affinity binding site region from the right using primed DNA synthesis and testing for filter binding in the presence of Int protein shows that sequences sufficient for tight binding of Int protein lie to the right of position +66. When attachment site DNA is protected by bound Int protein against digestion by exonuclease III, four Int dependent protection bands are seen in positions +58, +68, +79 and +88. This can be interpreted either as showing that four Int protein monomers bind to the high affinity region in series, or as evidence for wrapping of the DNA around Int protein, leading to structural changes resembling those occurring to DNA in nucleosomes.     

Investigation of site-specific DNA binding with nicking endonuclease Nt.BspD6I at single molecule level by atomic force microscopy

Nicking endonuclease Nt.BspD6I is a heterodimeric restriction endonuclease, one subunit of which exhibits specific nicking activity. It gets bound to double-stranded DNA and makes a break (nick) in one chain at a distance of 4 nucleotides from the binding site. In this work, for visualization of the specific binding and protein landing site an atomic force microscopy was used. In five minutes after incubation of DNA solution with nicking endonuclease, the DNA molecules with associated proteins which located at the expected binding site and "shared" DNA strand into two segments (approximately, 1/3 and 2/3 of length) were observed in the images. In addition, near the binding site DNA molecule had a height corresponding to a single-stranded DNA molecule, which was in good agreement with single-stranded cleavage by nickase in the course of complex formation.     

Investigation of site-specific DNA binding with nicking endonuclease Nt.BspD6I at single molecule level by atomic force microscopy

Nicking endonuclease Nt.BspD6I is a heterodimeric restriction endonuclease, one subunit of which exhibits specific nicking activity. It gets bound to double-stranded DNA and makes a break (nick) in one chain at a distance of 4 nucleotides from the binding site. In this work, for visualization of the specific binding and protein landing site, atomic force microscopy was used. In five minutes after incubation of DNA solution with nicking endonuclease, DNA molecules with associated proteins which located at the expected binding site and “shared” the DNA strand into two segments (approximately, 1/3 and 2/3 of length) were observed in the images. In addition, near the binding site the DNA molecule had a height corresponding to a single-stranded DNA molecule, which was in good agreement with single-stranded cleavage by nickase in the course of complex formation.     

Affinity labeling the DNA polymerase alpha complex. I. Pyridoxal 5'-phosphate inhibition of DNA polymerase and DNA primase activities of the DNA polymerase alpha complex from Drosophila melanogaster embryos

DNA polymerase alpha from Drosophila melanogaster embryos is a multisubunit enzyme complex which can exhibit DNA polymerase, 3'----5' exonuclease, and DNA primase activities. Pyridoxal 5'-phosphate (PLP) inhibition of DNA polymerase activity in this complex is time dependent and exhibits saturation kinetics. Inhibition can be reversed by incubation with an excess of a primary amine unless the PLP-enzyme conjugate is first reduced with NaBH4. These results indicate that PLP inhibition occurs via imine formation at a specific site(s) on the enzyme. Results from substrate protection experiments are most consistent with inhibition of DNA polymerase activity by PLP binding to either one of two sites. One site (PLP site 1) can be protected from PLP inhibition by any nucleoside triphosphate in the absence or presence of template-primer, suggesting that PLP site 1 defines a nucleotide-binding site which is important for DNA polymerase activity but which is distinct from the DNA polymerase active site. PLP also inhibits DNA primase activity of the DNA polymerase alpha complex, and primase activity can be protected from PLP inhibition by nucleotide alone, arguing that PLP site 1 lies within the DNA primase active site. The second inhibitory PLP-binding site (PLP site 2) is only protected from PLP inhibition when the enzyme is bound to both template-primer and correct dNTP in a stable ternary complex. Since binding of PLP at site 2 is mutually exclusive with template-directed dNTP binding at the DNA polymerase active site, PLP site 2 appears to define the dNTP binding domain of the active site. Results from initial velocity analysis of PLP inhibition argue that there is a rate-limiting step in the polymerization cycle during product release and/or translocation.     

Distinct DNA elements contribute to Rap1p affinity for its binding sites

The essential Saccharomyces cerevisiae regulatory protein Rap1 contains two tandem Myb-like DNA binding sub-domains that interact with two defined DNA "hemisites", separated by a trinucleotide linker sequence. We have mapped the thermodynamically defined DNA-binding site of Rap1 by a primer extension method coupled with electrophoretic separation of bound and unbound DNAs. Relative to published consensus sequences, we detect binding interactions that extend 3 bp beyond the 5'-end of the putative DNA-binding site. This new site of interaction is located where the DNA minor groove faces the protein, and may account for the major DNA bending induced by Rap1p that previous studies have mapped to a site immediately upstream of the consensus binding site. In addition, we show that a minimal DNA-binding site made of one single consensus hemisite, preceded or followed by a spacer trinucleotide that interacts with the unstructured protein linker between the two Rap1p DNA binding domains, is able to bind the protein, although at lower affinity. These findings may explain the observed in vivo binding properties of Rap1p at many promoters that lack canonical binding sites.     

Topoisomerase I-mediated DNA cleavage induced by the minor groove-directed binding of bibenzimidazoles to a distal site

Many agents (e.g. camptothecins, indolocarbazoles, indenoisoquinolines, and dibenzonaphthyridines) stimulate topoisomerase I (TOP1)-mediated DNA cleavage (a behavior termed topoisomerase I poisoning) by interacting with both the DNA and the enzyme at the site of cleavage (typically by intercalation between the -1 and +1 base-pairs). The bibenzimidazoles, which include Hoechst 33258 and 33342, are a family of DNA minor groove-directed agents that also stimulate topoisomerase I-mediated DNA cleavage. However, the molecular mechanism by which these ligands poison TOP1 is poorly understood. Toward this goal, we have used a combination of mutational, footprinting, and DNA binding affinity analyses to define the DNA binding site for Hoechst 33258 and a related derivative that results in optimal induction of TOP1-mediated DNA cleavage. We show that this DNA binding site is located downstream from the site of DNA cleavage, encompassing the base-pairs from position +4 to +8. The distal nature of this binding site relative to the site of DNA cleavage suggests that minor groove-directed agents like the bibenzimidazoles poison TOP1 via a mechanism distinct from compounds like the camptothecins, which interact at the site of cleavage.     

DNA bending and twisting properties of integration host factor determined by DNA cyclization

The binding of many proteins to DNA is profoundly affected by DNA bending, twisting, and supercoiling. When protein binding alters DNA conformation, interaction between inherent and induced DNA conformation can affect protein binding affinity and specificity. Integration host factor (IHF), a sequence-specific, DNA-binding protein of Escherichia coli, strongly bends the DNA upon binding. To assess the influence of inherent DNA bending on IHF binding, we took advantage of the high degree of natural static curvature associated with an IHF site on a 163-bp minicircle and measured the binding affinity of IHF for its recognition site contained on this DNA in both circular and linear form. IHF showed a higher affinity for the circular form of the DNA when compared to the linear form. In addition, the presence of IHF during DNA cyclization changed the topology of cyclization products and their ability to bind IHF, consistent with IHF untwisting DNA. These results show that inherent DNA conformation anisotropy is an important determinant of IHF binding affinity and suggests a mechanism for modulation of IHF activity by local DNA conformation.     

Distamycin-induced inhibition of formation of a nucleoprotein complex between the terminase small subunit G1P and the non-encapsidated end (pacL site) of Bacillus subtilis bacteriophage SPP1.

The small subunit of the Bacillus subtilis bacteriophage SPP1 terminase (G1P) forms a sequence-specific nucleoprotein complex with the SPP1 non-encapsidated end (pacL site) during initiation of DNA encapsidation. Gel mobility shift assay was used to study the G1P-pacL interaction. Distamycin, a minor groove binder that induces local distortion of the DNA, inhibits G1P-pacL complex formation. The competition of G1P with distamycin for DNA binding at the pacL site is independent of the order of addition of the reactants. Other minor groove binders, such as spermine or Hoechst 33258, which do not distort DNA, failed to compete with G1P for pacL DNA binding. Cationic metals, which generate a repertoire of DNA structures different from that caused by the minor groove binders, can partially reverse the distamycin-induced inhibition of G1P binding to pacL DNA. The major groove binder methyl green, which does not distort sequence-directed bending of pacL DNA, competes with G1P for binding at the pacL site. Our data suggest that the natural sequence-directed bend that exists within the pacL site is the architectural element that facilitates assembly of a nucleoprotein complex and hence initiation of DNA encapsidation by bacteriophage SPP1.     

Supercoiling-dependent site-specific binding of HU to naked Mu DNA.

Using HU chemical nucleases to probe HU-DNA interactions, we report here for the first time site-specific binding of HU to naked DNA. An unique feature of this interaction is the absolute requirement for negative DNA supercoiling for detectable levels of site-specific DNA binding. The HU binding site is the Mu spacer between the L1 and L2 transposase binding sites. Our results suggest recognition of an altered DNA structure which is induced by DNA supercoiling. We propose that recruitment of HU to this naked DNA site induces the DNA bending required for productive synapsis and transpososome assembly. Implications of HU as a supercoiling sensor with a potential in vivo regulatory role are discussed. Finally, using HU nucleases we have also shown that non-specific DNA binding by HU is stimulated by increasing levels of supercoiling.     

Determinants of the position of a Flp-induced DNA bend.

The Flp site-specific recombinase from Saccharomyces cerevisiae induces DNA bending upon interaction with the Flp recognition target (FRT) site. The minimal FRT site is comprised of two inverted binding elements which flank a central core region. Binding of a single monomer of Flp to DNA induces a DNA bend of 60 degrees. The position of this bend differed depending on whether the substrate contained a single binding element or a two-element FRT site. In the present work we tested and disproved a model in which a single Flp monomer interacts with both symmetry elements of a single FRT site. Likewise, we showed that a model in which a Flp monomer dissociates from a singly occupied FRT site and reassociates with the unbound element of another singly occupied FRT site during electrophoresis, does not account for the apparent shift in the position of the bend centre. It seems that the movement of a Flp monomer between the a and b elements of one FRT site during electrophoresis accounts for this anomaly. The position of the DNA bend resulting from the association of a Flp monomer with the FRT site is also influenced by the DNA sequences flanking the site. We conclude that attempts to measure the bend centre of a complex of one Flp molecule bound to a DNA containing two binding elements give misleading results. The position of the bend is more accurately measured in the presence of a single binding element.