Fine mapping and characterization of the Rous sarcoma virus Pr76gag late assembly domain.

The p2 region of the Rous sarcoma virus (RSV) Gag polyprotein contains an assembly domain, which is required late in replication for efficient budding of virus-like particles from cells (J. W. Wills, C. E. Cameron, C. B. Wilson, Y. Xiang, R. P. Bennett, and J. Leis, J. Virol. 68:6605-6618, 1994). This domain, referred to as the L domain, was previously mapped to the 11 amino acids of p2b. Through the analysis of a series of deletion and substitution mutations, the L domain has now been fine mapped to a highly conserved amino acid sequence, PPPPYV of p2b. Sequences flanking PPPPYV motif can be deleted without any effect on budding. Defects caused by L-domain deletions can be rescued by placing a wild-type copy of the sequence at several other positions in RSV Gag. A proline-rich P(S/T)APP motif is found in many retroviral Gag polyproteins; the motif found in the p6 region of human immunodeficiency virus type 1 has been implicated in late functions of the virus. Substitution of the RSV L domain with this motif in a 10-amino-acid sequence derived from visna leukemia virus results in wild-type release of virus particles from cells. In contrast, the slightly different sequences from Gibbon ape leukemia virus, Moloney leukemia virus, PSAPP alone, or a proline-rich SH3 binding sequence do not efficiently rescue RSV L-domain mutations.     

Analysis of cleavage site mutations between the NC and PR Gag domains of Rous sarcoma virus.

In retroviruses, the viral protease (PR) is released as a mature protein by cleavage of Gag, Gag-Pro, or Gag-Pro-Pol precursor polypeptides. In avian sarcoma and leukemia viruses (ASLV), PR forms the C-terminal domain of Gag. Based on the properties of a mutation (cs22) in the cleavage site between the upstream NC domain and the PR domain, the proteolytic liberation of PR previously was inferred to be essential for processing of Gag and Pol proteins. To study this process in more detail, we have analyzed the effects that several mutations at the NC-PR cleavage site have on proteolytic processing in virus-like particles expressed in COS and quail cells. Mutant Gag proteins carrying the same mutations also were synthesized in vitro and tested for processing with purified PR. In both types of studies, N-terminal sequencing of the liberated PR domain was carried out to exactly identify the site of cleavage. Finally, synthetic peptides corresponding to the mutant proteins were assessed for the ability to act as substrates for PR. The results were all consistent and led to the following conclusions. (i) In vivo, if normal processing between NC and PR is prevented by mutations, limited cleavage occurs at a previously unrecognized alternative site three amino acids downstream, i.e., in PR. This N-terminally truncated PR is inactive as an enzyme, as inferred from the global processing defect in cs22 and a similar mutant. (ii) In Gag proteins translated in vitro, purified PR cleaves this alternative site as rapidly as it does the wild-type site. (iii) Contrary to previously accepted rules describing retroviral cleavage sites, an isoleucine residue placed at the P1 position of the NC-PR cleavage site does not hinder normal processing. (iv) A proline residue placed at the P2 position in this cleavage site blocks normal processing.     

Processing sites in the human immunodeficiency virus type 1 (HIV-1) Gag-Pro-Pol precursor are cleaved by the viral protease at different rates

A series of amino acid substitutions (M239F, M239G, P240F, V241G) were placed in the p10-CA protease cleavage site (VVAM*PVVI) to change the rate of cleavage of the junction. The effects of these substitutions on p10-CA cleavage by RSV PR were confirmed by measuring the kinetics of cleavage of model peptide substrates containing the wild type and mutant p10-CA sites. The effects of these substitutions on processing of the Gag polyprotein were determined by labeling Gag transfected COS-1 cells with³⁵S-Met and -Cys, and immunoprecipitation of Gag and its cleavage products from the media and lysate fractions. All substitutions except M239F caused decreases in detectable Gag processing and subsequent release from cells. Several of the mutants also caused defects in production of the three CA proteins. The p10-CA mutations were subcloned into an RSV proviral vector (RCAN) and introduced into a chick embryo fibroblast cell line (DF-1). All of the mutations except M239F blocked RSV replication. In addition, the effects of the M239F and M239G substitutions on the morphology of released virus particles were examined by electron microscopy. While the M239F particles appeared similar to wild type particles, M239G particles contained cores that were large and misshapen. These results suggest that mutations affecting cleavage at the p10-CA protease cleavage site block RSV replication and can have a negative impact on virus particle morphology.     

An assembly domain of the Rous sarcoma virus Gag protein required late in budding.

The Gag protein of Rous sarcoma virus has the ability to direct particle assembly at the plasma membrane in the absence of all the other virus-encoded components. An extensive deletion analysis has revealed that very large regions of this protein can be deleted without impairing budding and has suggested that the essential functions map to three discrete regions. In the studies reported here, we establish the location of assembly domain 2 (AD2) within the proline-rich p2b sequence of this Gag protein. AD2 mutants lacking the p2b sequence were completely defective for particle release even though their Gag proteins were tightly associated with the membrane fraction and exhibited high levels of protease activity. Mutations that inactivate the viral protease did not restore budding to wild-type levels for these mutants, indicating that the defect is not due simply to a loss of protease regulation. AD2 mutants could be rescued into dense particles in genetic complementation assays, indicating that their defect is not due to a gross alteration of the overall conformation of the protein and that the assembly function is not needed on every Gag molecule in the population. Several mutants with amino acid substitutions in the p2b sequence were found to have an intermediate capacity for budding. Inactivation of the protease of these mutants stabilized the Gag polyprotein within the cells and allowed an increase in particle release; however, the rate of budding remained slow. We favor the idea that AD2 is a dynamic region of movement, perhaps serving as a molecular hinge to allow the particle to emerge from the surface of the cell during budding.     

Equine infectious anemia virus utilizes a YXXL motif within the late assembly domain of the Gag p9 protein.

We have previously demonstrated that the Gag p9 protein of equine infectious anemia virus (EIAV) is functionally homologous with Rous sarcoma virus (RSV) p2b and human immunodeficiency virus type 1 (HIV-1) p6 in providing a critical late assembly function in RSV Gag-mediated budding from transfected COS-1 cells (L. J. Parent et al., J. Virol. 69:5455-5460, 1995). In light of the absence of amino acid sequence homology between EIAV p9 and the functional homologs of RSV and HIV-1, we have now designed an EIAV Gag-mediated budding assay to define the late assembly (L) domain peptide sequences contained in the EIAV p9 protein. The results of these particle budding assays revealed that expression of EIAV Gag polyprotein in COS-1 cells yielded extracellular Gag particles with a characteristic density of 1.18 g/ml, while expression of EIAV Gag polyprotein lacking p9 resulted in a severe reduction in the release of extracellular Gag particles. The defect in EIAV Gag polyprotein particle assembly could be corrected by substituting either the RSV p2b or HIV-1 p6 protein for EIAV p9. These observations demonstrated that the L domains of EIAV, HIV-1, and RSV were interchangeable in mediating assembly of EIAV Gag particles in the COS-1 cell budding assay. To localize the L domain of EIAV p9, we next assayed the effects of deletions and site-specific mutations in the p9 protein on its ability to mediate budding of EIAV Gag particles. Analyses of EIAV Gag constructs with progressive N-terminal or C-terminal deletions of the p9 protein identified a minimum sequence of 11 amino acids (Q20N21L22Y23P24D25L26S27E28I29K30) capable of providing the late assembly function. Alanine scanning studies of this L-domain sequence demonstrated that mutations of residues Y23, P24, and L26 abrogated the p9 late budding function; mutations of other residues in the p9 L domain did not substantially affect the level of EIAV Gag particle assembly. These data indicate that the L domain in EIAV p9 utilizes a YXXL motif which we hypothesize may interact with cellular proteins to facilitate virus particle budding from infected cells.     

Mutational analysis of the octapeptide sequence motif at the NS1-NS2A cleavage junction of dengue type 4 virus.

We have previously shown that proper processing of dengue type 4 virus NS1 from the NS1-NS2A region of the viral polyprotein requires a hydrophobic N-terminal signal and the downstream NS2A. Results from deletion analysis indicate that a minimum length of eight amino acids at the C terminus of NS1 is required for cleavage at the NS1-NS2A junction. Comparison of this eight-amino-acid sequence with the corresponding sequences of other flaviviruses suggests a consensus cleavage sequence of Met/Leu-Val-Xaa-Ser-Xaa-Val-Xaa-Ala. Site-directed mutagenesis was performed to construct mutants of NS1-NS2A that contained a single amino acid substitution at different positions of the consensus cleavage sequence or at the immediate downstream position. Three to eight different substitutions were made at each position. A total of 50 NS1-NS2A mutants were analyzed for their cleavage efficiency relative to that of the wild-type dengue type 4 virus sequence. As predicted, nearly all substitutions at positions P1, P3, P5, P7, and P8, occupied by conserved amino acids, yielded low levels of cleavage, with the exception that Pro or Ala substituting for Ser (P5) was tolerated. Substitutions of an amino acid at the remaining positions occupied by nonconserved amino acids generally yielded high levels of cleavage. However, some substitutions at nonconserved positions were not tolerated. For example, substitution of Gly or Glu for Gln (P4) and substitution of Val or Glu for Lys (P6) each yielded a low level of cleavage. Overall, these data support the proposed cleavage sequence motif deduced by comparison of sequences among the flaviviruses. This study also showed that in addition to the eight-amino-acid sequence, the amino acid immediately following the NS1-NS2A cleavage site plays a role in cleavage.     

In vitro assembly of virus-like particles with Rous sarcoma virus Gag deletion mutants: identification of the p10 domain as a morphological determinant in the formation of spherical particles.

Retroviruses are unusual in that expression of a single protein, Gag, leads to budding of virus-like particles into the extracellular space. We have developed conditions under which virus-like particles are formed spontaneously in vitro from fragments of Rous sarcoma virus (RSV) Gag protein purified after expression in Escherichia coli. The CA-NC fragment of Gag was shown previously to assemble into hollow cylinders (S. Campbell and V. M. Vogt, J. Virol. 69:6487-6497, 1995). We have now extended these studies to larger Gag proteins. In every case examined, assembly into regular structures required RNA. A nearly full-length Gag missing only the C-terminal PR domain, as well as similar proteins missing in addition the N-terminal half of MA, the C-terminal half of MA, the entire MA sequence, or the entire p2 sequence, all assembled into spherical particles resembling RSV in size. By contrast, proteins missing p10 assembled into cylindrical particles like those formed by CA-NC alone. Thin section electron microscopy showed that each of these Gag proteins formed in the expressing E. coli cells particles similar in shape to those seen in vitro. We conclude from these results that neither the sequences required for membrane binding in vivo, near the N terminus of Gag, nor the sequences required for a late step in budding, in the p2 portion of Gag, are essential for formation of virus-like particles in this system. Furthermore, we postulate the existence of a shape-determining sequence in p10, which provides or facilitates interactions required for the growing particle to be constrained to a spherical shape.     

Assembly-defective point mutants of the human immunodeficiency virus type 1 Gag precursor phenotypically expressed in recombinant baculovirus-infected cells.

Two substitution mutants of the human immunodeficiency virus type 1 gag gene product were isolated after nitrous acid mutagenesis of a recombinant baculovirus expressing a non-N-myristylated, p6-deleted Gag precursor (Pr49). Both mutants failed to assemble intracellular Gag virus-like particles, as does the parental recombinant, and therefore expressed a self-assembly defective (Sad) phenotype in insect cells. The mutations consisted of nonconservative changes involving highly conserved hydrophobic residues in the p24 domain, Leu to Pro at position 268 (L268P) and Leu to Ser at amino acid 322 (L322S). Experimental data suggested that the two mutated residues belonged to functionally different regions of the Gag precursor. (i) A partial complementation effect between the two mutants for Gag precursor assembly was observed in coinfection experiments. (ii) The two mutations showed different phenotypes when placed in the N-myristylated context, of which only the L268P mutation abolished extracellular budding and release of Gag particles at the plasma membrane. Both L268P and L322S mutants had a trans-dominant negative effect on the intracellular assembly of a non-N-myristylated, full-length (Pr55) Gag precursor expressed by a coinfecting recombinant. None of the mutants, however, showed any detectable effect in trans on membrane targeting and budding of the coexpressed N-myristylated wild-type Gag precursor.     

Molecular analysis of the feline immunodeficiency virus protease: generation of a novel form of the protease by autoproteolysis and construction of cleavage-resistant proteases.

The feline immunodeficiency virus (FIV) protease is essential for virion maturation and subsequent viral replication in that it cleaves the Gag and Gag/Pol polyproteins at eight sites to release the respective structural proteins and enzymes. During purification of a recombinant FIV protease (PR), we noted that it underwent autoproteolysis (autolysis) to give discrete cleavage products. These additional PR cleavage sites were defined using N-terminal amino acid sequence analysis and mass spectrometry. Protease breakdown products were also found in FIV virions and were of the same apparent molecular weights as the in vitro autolysis products. Four primary PR autolysis sites were blocked via substitution of either the P1 amino acid with a beta-branched amino acid or the P1' amino acid with lysine. Cleavage-resistant PRs which had Km and k(cat) values similar to those of FIV PR were constructed. An autolysis time course determined that blocking all four primary autolysis sites yielded a cleavage-resistant PR which was enzymatically stable. Concomitant with autolysis is the generation of an N-terminally truncated form of the PR (Thr6/PR) which has enhanced stability with respect to that of FIV PR. A structural basis for the Thr6/PR activity is presented, as are the possible roles of autolysis in the viral replication cycle.     

Replacement of the P1 amino acid of human immunodeficiency virus type 1 Gag processing sites can inhibit or enhance the rate of cleavage by the viral protease

Processing of the human immunodeficiency virus type 1 (HIV-1) Gag precursor is highly regulated, with differential rates of cleavage at the five major processing sites to give characteristic processing intermediates. We examined the role of the P1 amino acid in determining the rate of cleavage at each of these five sites by using libraries of mutants generated by site-directed mutagenesis. Between 12 and 17 substitution mutants were tested at each P1 position in Gag, using recombinant HIV-1 protease (PR) in an in vitro processing reaction of radiolabeled Gag substrate. There were three sites in Gag (MA/CA, CA/p2, NC/p1) where one or more substitutions mediated enhanced rates of cleavage, with an enhancement greater than 60-fold in the case of NC/p1. For the other two sites (p2/NC, p1/p6), the wild-type amino acid conferred optimal cleavage. The order of the relative rates of cleavage with the P1 amino acids Tyr, Met, and Leu suggests that processing sites can be placed into two groups and that the two groups are defined by the size of the P1' amino acid. These results point to a trans effect between the P1 and P1' amino acids that is likely to be a major determinant of the rate of cleavage at the individual sites and therefore also a determinant of the ordered cleavage of the Gag precursor.     

Late assembly domain function can exhibit context dependence and involves ubiquitin residues implicated in endocytosis

Retroviral Gag polyproteins contain regions that promote the separation of virus particles from the plasma membrane and from each other. These Gag regions are often referred to as late assembly (L) domains. The L domain of human immunodeficiency virus type 1 (HIV-1) is in the C-terminal p6(gag) domain and harbors an essential P(T/S)APP motif, whereas the L domains of oncoretroviruses are in the N-terminal half of the Gag precursor and have a PPXY core motif. We recently observed that L domains induce the ubiquitination of a minimal HIV-1 Gag construct and that point mutations which abolish L domain activity prevent Gag ubiquitination. In that study, a peptide from the Ebola virus L domain with overlapping P(T/S)APP and PPXY motifs showed exceptional activity in promoting Gag ubiquitination and the release of virus-like particles. We now show that a substitution which disrupts the PPXY motif but leaves the P(T/S)APP motif intact abolishes L domain activity in the minimal Gag context, but not in the context of a near full-length HIV-1 Gag precursor. Our results reveal that the P(T/S)APP motif does not function autonomously and indicate that the HIV-1 nucleocapsid-p1 region, which is proximal to p6(gag), can cooperate with the conserved L domain core motif. We have also examined the effects of ubiquitin mutants on virus-like particle production, and the results indicate that residues required for the endocytosis function of ubiquitin are also involved in virus budding.     

Detailed mapping of the nuclear export signal in the Rous sarcoma virus Gag protein

The Rous sarcoma virus (RSV) Gag polyprotein undergoes transient nuclear trafficking as an intrinsic part of the virus assembly pathway. Nuclear export of Gag is crucial for the efficient production of viral particles and is accomplished through the action of a leptomycin B (LMB)-dependent nuclear export signal (NES) in the p10 domain (L. Z. Scheifele, R. A. Garbitt, J. D. Rhoads, and L. J. Parent, Proc. Natl. Acad. Sci. USA 99:3944-3949, 2002). We have now mapped the nuclear export activity to the C-terminal portion of the p10 sequence and identified the four hydrophobic amino acids within this region that comprise a leucine-rich NES. Alteration of these hydrophobic residues resulted in the accumulation of Gag proteins within the nucleus and a budding defect greater than that obtained with LMB treatment of cells expressing the wild-type Gag protein (Scheifele et al., Proc. Natl. Acad. Sci. USA 99:3944-3949, 2002). In addition, export of Gag from the nucleus was found to be a rate-limiting step in virus-like particle production. Consistent with a role for the NES sequence in viral replication, this cluster of hydrophobic residues in p10 is conserved across a wide range of avian retroviruses. Furthermore, naturally occurring substitutions within this region in related viruses maintained nuclear export activity and remained sensitive to the activity of LMB. Using gain-of-function approaches, we found that the hydrophobic motif in p10 was sufficient to promote the nuclear export of a heterologous protein and was positionally independent within the Gag polyprotein. Finally, the export pathway was further defined by the ability of specific nucleoporin inhibitors to prevent the egress of Gag from the nucleus, thereby identifying additional cellular mediators of RSV replication.     

Identification of Retroviral Late Domains as Determinants of Particle Size

Retroviral Gag proteins, in the absence of any other viral products, induce budding and release of spherical, virus-like particles from the plasma membrane. Gag-produced particles, like those of authentic retrovirions, are not uniform in diameter but nevertheless fall within a fairly narrow distribution of sizes. For the human immunodeficiency virus type 1 (HIV-1) Gag protein, we recently reported that elements important for controlling particle size are contained within the C-terminal region of Gag, especially within the p6 sequence (L. Garnier, L. Ratner, B. Rovinski, S.-X. Cao, and J. W. Wills, J. Virol. 72:4667–4677, 1998). Deletions and substitutions throughout this sequence result in the release of very large particles. Because the size determinant could not be mapped to any one of the previously defined functions within p6, it seemed likely that its activity requires the overall proper folding of this region of Gag. This left open the possibility of the size determinant residing in a subdomain of p6, and in this study, we examined whether the late domain (the region of Gag that is critical for the virus-cell separation step) is involved in controlling particle size. We found that particles of normal size are produced when p6 is replaced with the totally unrelated late domain sequences from Rous sarcoma virus (contained in its p2b sequence) or equine infectious anemia virus (contained in p9). In addition, we found that the large particles released in the absence of p6 require the entire CA and adjacent spacer peptide sequences, whereas these internal sequences of HIV-1 Gag are not needed for budding (or proper size) when a late domain is present. Thus, it appears the requirements for budding are very different in the presence and absence of p6.     

Proper processing of avian sarcoma/leukosis virus capsid proteins is required for infectivity

The formation of the mature carboxyl terminus of CA in avian sarcoma/leukemia virus is the result of a sequence of cleavage events at three PR sites that lie between CA and NC in the Gag polyprotein. The initial cleavage forms the amino terminus of the NC protein and releases an immature CA, named CA1, with a spacer peptide at its carboxyl terminus. Cleavage of either 9 or 12 amino acids from the carboxyl terminus creates two mature CA species, named CA2 and CA3, that can be detected in avian sarcoma/leukemia virus (R. B. Pepinsky, I. A. Papayannopoulos, E. P. Chow, N. K. Krishna, R. C. Craven, and V. M. Vogt, J. Virol. 69:6430-6438, 1995). To study the importance of each of the three CA proteins, we introduced amino acid substitutions into each CA cleavage junction and studied their effects on CA processing as well as virus assembly and infectivity. Preventing cleavage at any of the three sites produced noninfectious virus. In contrast, a mutant in which cleavage at site 1 was enhanced so that particles contained CA2 and CA3 but little detectable CA1 was infectious. These results support the idea that infectivity of the virus is closely linked to proper processing of the carboxyl terminus to form two mature CA proteins.     

Proteolytic activity of novel human immunodeficiency virus type 1 proteinase proteins from a precursor with a blocking mutation at the N terminus of the PR domain.

The mature human immunodeficiency virus type 1 proteinase (PR; 11 kDa) can cleave all interdomain junctions in the Gag and Gag-Pol polyprotein precursors. To determine the activity of the enzyme in its precursor form, we blocked release of mature PR from a truncated Gag-Pol polyprotein by introducing mutations into the N-terminal Phe-Pro cleavage site of the PR domain. The mutant precursor autoprocessed efficiently upon expression in Escherichia coli. No detectable mature PR was released; however, several PR-related products ranging in size from approximately 14 to 18 kDa accumulated. Products of the same size were generated when mutant precursors were digested with wild-type PR. Thus, PR can utilize cleavage sites in the region upstream of the PR domain, resulting in the formation of extended PR species. On the basis of active-site titration, the PR species generated from mutated precursor exhibited wild-type activity on peptide substrates. However, the proteolytic activity of these extended enzymes on polyprotein substrates provided exogenously was low when equimolar amounts of extended and wild-type PR proteins were compared. Mammalian cells expressing the mutated precursor produced predominantly precursor and considerably reduced amounts of mature products. Released particles consisted mostly of uncleaved or partially cleaved polyproteins. Our results suggest that precursor forms of PR can autoprocess but are less efficient in processing of the Gag precursor for formation of mature virus particles.     

Placement of leucine zipper motifs at the carboxyl terminus of HIV-1 protease significantly reduces virion production

Natural HIV-1 protease (PR) is homodimeric. Some researchers believe that interactions between HIV-1 Gag-Pol molecules trigger the activation of embedded PR (which mediates Gag and Gag-Pol cleavage), and that Gag-Pol assembly domains outside of PR may contribute to PR activation by influencing PR dimer interaction in a Gag-Pol context. To determine if the enhancement of PR dimer interaction facilitates PR activation, we placed single or tandem repeat leucine zippers (LZ) at the PR C-terminus, and looked for a correlation between enhanced Gag processing efficiency and increased Gag-PR-LZ multimerization capacity. We found significant reductions in virus-like particles (VLPs) produced by HIV-1 mutants, with LZ fused to the end of PR as a result of enhanced Gag cleavage efficiency. Since VLP production can be restored to wt levels following PR activity inhibition, this assembly defect is considered PR activity-dependent. We also found a correlation between the LZ enhancement effect on Gag cleavage and enhanced Gag-PR multimerization. The results suggest that PR dimer interactions facilitated by forced Gag-PR multimerization lead to premature Gag cleavage, likely a result of premature PR activation. Our conclusion is that placement of a heterologous dimerization domain downstream of PR enhances PR-mediated Gag cleavage efficiency, implying that structural conformation, rather than the primary sequence outside of PR, is a major determinant of HIV-1 PR activation.     

PR domain of rous sarcoma virus Gag causes an assembly/budding defect in insect cells

While baculovirus expression of Gag proteins from numerous retroviruses has led reliably to production of virus-like particles (VLPs), we observed that expression of Rous sarcoma virus Gag failed to produce VLPs. Transmission and scanning electron microscopy analysis revealed that the Gag protein reached the plasma membrane but was unable to correctly form particles. Addition of a myristylation signal had no effect on the budding defect, but deletion of the PR domain of Gag restored normal budding. The resulting VLPs were morphologically distinct from human immunodeficiency virus type 1 VLPs expressed in parallel.     

The spacer peptide between human immunodeficiency virus capsid and nucleocapsid proteins is essential for ordered assembly and viral infectivity.

Morphogenesis of retroviruses involves ordered assembly of the structural Gag- and Gag-Pol polyproteins, with subsequent budding from the plasma membrane and proteolytic cleavage by the viral proteinase (PR). Two cleavage sites exist between the capsid (CA) and nucleocapsid (NC) domains of the human immunodeficiency virus (HIV) type 1 Gag polyprotein which are separated by a 14-amino-acid spacer peptide of unknown function. To analyze the role of the two cleavage sites and the spacer peptide, both sites were individually mutated and a deletion mutation that precisely removes the spacer peptide was constructed. Following transfection of proviral DNA carrying the point mutations, mutant polyproteins were synthesized and assembled like wild-type polyprotein, and release of particles was not significantly altered. Both mutations abolished cleavage at the respective site and reduced or abolished viral infectivity. Deletion of the spacer peptide severely affected ordered assembly and reduced particle release. The extracellular particles that were released exhibited normal density but were heterogeneous in size. Electron micrographs revealed large electron-dense plaques underneath the plasma membrane of transfected cells which appeared like confluent ribonucleoprotein complexes arrested early in the budding process. Extracellular particles exhibited very aberrant and heterogeneous morphology and were incapable of inducing viral spread. These particles may correspond to membrane vesicles sequestered by the rigid structures underneath the cell membrane and not released by a regular budding process.     

PPPYVEPTAP motif is the late domain of human T-cell leukemia virus type 1 Gag and mediates its functional interaction with cellular proteins Nedd4 and Tsg101 [corrected

The human T-cell leukemia virus type 1 (HTLV-1) Gag polyprotein contains two adjacent proline-rich motifs (sequence PPPYVEPTAP) in the C terminus of the matrix domain [corrected]. Proline-to-alanine mutations were introduced into either or both motifs of HTLV-1 to determine the effect on the release of HTLV-1 virus-like particles from 293T cells. The release of both single mutants was significantly reduced, whereas a double mutation in both motifs abolished the release of the HTLV-1 particles. Two-hybrid and in vitro binding assays showed that the HTLV-1 Gag polyprotein binds both Tsg101 and Nedd4 proteins. The interaction with HTLV-1 Gag required the central WW domain of Nedd4 and the ubiquitin enzyme variant (UEV) domain of Tsg101. We expressed various fragments of Nedd4 and Tsg101 proteins in 293T cells and tested for their ability to interfere with virion release mediated by the HTLV-1 Gag-Pro polyprotein. Fragments consisting of the N-terminal UEV domain of Tsg101 and the central WW and C-terminal Hect domains of Nedd4 protein all caused transdominant inhibition of HTLV-1 particle release. Similarly, inhibition of the proteasome significantly decreased HTLV-1 particle release. Furthermore, the WW domain overexpression caused an early arrest of HTLV-1 particle morphogenesis before the membrane is deformed into the typical half-shell structure. This result suggests that Nedd4 is involved early in budding of HTLV-1.