Packaging double-helical DNA into viral capsids

DNA packaging in bacteriophage P4 has been examined using a molecular mechanics model with a reduced representation containing one pseudoatom per turn of the double helix. The model is a discretized version of an elastic continuum model. The DNA is inserted piecewise into the model capsid, with the structure being reoptimized after each piece is inserted. Various optimization protocols were investigated, and it was found that molecular dynamics at a very low temperature (0.3 K) produces the optimal packaged structure. This structure is a concentric spool, rather than the coaxial spool that has been commonly accepted for so many years. This geometry, which was originally suggested by Hall and Schellman in 1982 (Biopolymers Vol. 21, pp. 2011-2031), produces a lower overall elastic energy than coaxial spooling.     

Use of liposomes, viral capsids, and nanoparticles as DNA carriers

We tested a variety of liposomes for parameters such as DNA binding capacity and DNase I protection of incorporated and attached DNA to elucidate their use as vehicles for DNA transfer into cells and animals. The results were compared to other potential DNA vehicles, empty viral capsids, and nanoparticles. Maximal binding capacity was achieved for positively charged nanoparticles, DNase I protection was observed for most preparations with neosome preparations being least efficient. The uptake of radiolabeled DNA by cells in culture was determined for cationic and nonionic surfactant vesicles, viral capsids, and nanoparticles. Cellular DNA uptake was best for dioleoyl-derived positively charged liposomes (N-[1-(2,3-dioleoyloxy)propyl]-N,N,N-trimethylammonium chloride; DOTMA) and the DNA could be shown to be physiologically active. The recombination rate for DNA fragments transfected in polyoma capsids in live mice was higher than for liposome mediated transfection. Homologous recombination could be observed for both DOTMA and polyoma-mediated DNA transfer.     

Base-stacking interactions in double-helical DNA structures: experiment versus theory

Atom-atom potential energy calculations have been undertaken for deriving stacking energies in double-helical structures. A comparison between the energy patterns of A- and B-type double-helical fragments determined by single-crystal X-ray diffraction methods versus idealized uniform models based on fibre diffraction data shows that the van der Waals stacking energy is largely sensitive to local changes in the relative orientation of adjacent base pairs. The sequence-dependent conformational variability observed in the high-resolution structures appears to be a consequence of the equipartitioning of the stacking energy along the double helix. The large energy variations expected for a uniform structure are dampened considerably in the observed structures by means of local changes in conformational features such as helix rotation and roll angles between base pairs.     

Effect of 1-methyladenine on double-helical DNA structures

Methylation at the N1 site of adenine leads to the formation of cytotoxic 1-methyladenine (m1A). Since the N1 site of adenine is involved in the hydrogen bonding of T·A and A·T Watson–Crick base pairs, it is expected that the pairing interactions will be disrupted upon 1-methylation. In this study, high-resolution NMR investigations were performed to determine the effect of m1A on double-helical DNA structures. Interestingly, instead of disrupting hydrogen bonding, we found that 1-methylation altered the T·A Watson–Crick base pair to T(anti)·m1A(syn) Hoogsteen base pair, providing insights into the observed differences in AlkB-repair efficiency between dsDNA and ssDNA.     

Packaging of DNA by bacteriophage epsilon15: structure, forces, and thermodynamics

The structure of bacteriophage epsilon15 has recently been determined by 3D reconstruction of single particle cryo-electron microscopy images. Although this study revealed that the viral genome inside the bacteriophage is on average coaxially spooled, individual DNA conformations inside the capsid could not be determined. In the current study, we present the results of 40 independent simulations of DNA packaging into epsilon15 using the previously described low-resolution model for bacteriophages. In addition to coaxially spooled conformations, we also observe a number of folded-toroidal patterns, but the density averaged over all conformations closely resembles the experimental density. Thermodynamic analysis of the simulations predicts that a force of approximately 125 pN would be required to package DNA into epsilon15. We also show that the origin of this force is predominantly due to electrostatic and entropic contributions. However, the DNA conformation is determined primarily by the need to minimize the DNA bending energy.     

Packaging of DNA in bacteriophage heads: some considerations on energetics

We have made quantitative estimates of some of the energetic factors to be considered in packaging of double-stranded DNA in virus particles. Numerical calculations were made using parameters appropriate for T4 bacteriophage. The unfavorable factors, and the Gibbs free energies per mole virus at 20°C associated with them, are bending, 1.5 × 10³ kcal/mol; conformational restriction upon condensation, 5.1 × 10² kcal/mol; polyelectrolyte repulsion, 2.1 × 10⁵kcal/mol; and melting or kinking, 6.9 × 10³ kcal/mol. These must be counterbalanced in the assembled phage by noncovalent bonding interactions between protein subunits in the phage-head shell; by interactions between the DNA and polyvalent cations, especially putrescine and spermidine; nad perhaps by repulsive excluded volume and electrostatic interaction between the DNA and acidic polypeptides. Indeed, a rough estimate of the standard free energey of interaction between T4 DNA and the putrescine and spermidine contained in the head is --2.1 × 10⁵ kcal/mol. In the absence of the other two sources of stabilization, each head protein subunit must contribute about 210 kcal/mol of binding energy.     

Forces and pressures in DNA packaging and release from viral capsids

In a previous communication (Kindt et al., 2001) we reported preliminary results of Brownian dynamics simulation and analytical theory which address the packaging and ejection forces involving DNA in bacteriophage capsids. In the present work we provide a systematic formulation of the underlying theory, featuring the energetic and structural aspects of the strongly confined DNA. The free energy of the DNA chain is expressed as a sum of contributions from its encapsidated and released portions, each expressed as a sum of bending and interstrand energies but subjected to different boundary conditions. The equilibrium structure and energy of the capsid-confined and free chain portions are determined, for each ejected length, by variational minimization of the free energy with respect to their shape profiles and interaxial spacings. Numerical results are derived for a model system mimicking the lambda-phage. We find that the fully encapsidated genome is highly compressed and strongly bent, forming a spool-like condensate, storing enormous elastic energy. The elastic stress is rapidly released during the first stage of DNA injection, indicating the large force (tens of pico Newtons) needed to complete the (inverse) loading process. The second injection stage sets in when approximately 1/3 of the genome has been released, and the interaxial distance has nearly reached its equilibrium value (corresponding to that of a relaxed torus in solution); concomitantly the encapsidated genome begins a gradual morphological transformation from a spool to a torus. We also calculate the loading force, the average pressure on the capsid's walls, and the anisotropic pressure profile within the capsid. The results are interpreted in terms of the (competing) bending and interaction components of the packing energy, and are shown to be in good agreement with available experimental data.     

Effect of 1-methyladenine on thermodynamic stabilities of double-helical DNA structures

1-Methyladenine (m1A) alters T·A Watson-Crick to T·m1A Hoogsteen base pair. Owing to its conversion to N6-methyladenine (m6A) at higher temperatures, thermodynamic studies of m1A-containing DNAs using conventional melting methods are subject to the influence of m6A species. In this study, we applied nuclear magnetic resonance spectroscopy to determine the base pairing modes and effect of m1A on thermodynamic stability of double-helical DNA. The observed base pairing modes account for the destabilizing trend which follows the order T·m1A ∼ G·m1A < A·m1A < C·m1A, providing insights into the m1A flipping process and enhancing our understandings of the mutagenicity of m1A.     

Three-dimensional structures of the A, B, and C capsids of rhesus monkey rhadinovirus: insights into gammaherpesvirus capsid assembly, maturation, and DNA packaging

Rhesus monkey rhadinovirus (RRV) exhibits high levels of sequence homology to human gammaherpesviruses, such as Kaposi's sarcoma-associated herpesvirus, and grows to high titers in cell cultures, making it a good model system for studying gammaherpesvirus capsid structure and assembly. We have purified RRV A, B, and C capsids, thus for the first time allowing direct structure comparisons by electron cryomicroscopy and three-dimensional reconstruction. The results show that the shells of these capsids are identical and are each composed of 12 pentons, 150 hexons, and 320 triplexes. Structural differences were apparent inside the shells and through the penton channels. The A capsid is empty, and its penton channels are open. The B capsid contains a scaffolding core, and its penton channels are closed. The C capsid contains a DNA genome, which is closely packaged into regularly spaced density shells (25 A apart), and its penton channels are open. The different statuses of the penton channels suggest a functional role of the channels during capsid maturation, and the overall structural similarities of RRV capsids to alphaherpesvirus capsids suggest a common assembly and maturation pathway. The RRV A capsid reconstruction at a 15-A resolution, the best achieved for gammaherpesvirus particles, reveals overall structural similarities to alpha- and betaherpesvirus capsids. However, the outer regions of the capsid, including densities attributed to the Ta triplex and the small capsomer-interacting protein (SCIP or ORF65), exhibit prominent differences from their structural counterparts in alphaherpesviruses. This structural disparity suggests that SCIP and the triplex, together with tegument and envelope proteins, confer structural and potentially functional specificities to alpha-, beta-, and gammaherpesviruses.     

Recombinant viral capsids as an efficient vehicle of oligonucleotide delivery into cells

Delivery of oligonucleotides (ON) into cells is a technical challenge. In this study, we utilized the capsid of the hepatitis B virus (HBV) to meet this goal. A single and short open reading frame of the virus programs efficient capsid production in bacteria. We show that these capsids can encapsulate ON in vitro and then mediate their delivery into cells with extreme efficiency. This process is cell type non-specific, rendering the recombinant HBV capsid a potentially valuable vehicle for ON delivery into a wide range of cultured cells.     

Production and applications of engineered viral capsids

As biological agents, viruses come in an astounding range of sizes, with varied shapes and surface morphologies. The structures of viral capsids are generally assemblies of hundreds of copies of one or a few proteins which can be harnessed for use in a wide variety of applications in biotechnology, nanotechnology, and medicine. Despite their complexity, many capsid types form as homogenous populations of precise geometrical assemblies. This is important in both medicine, where well-defined therapeutics are critical for drug performance and federal approval, and nanotechnology, where precise placement affects the properties of the desired material. Here we review the production of viruses and virus-like particles with methods for selecting and manipulating the size, surface chemistry, assembly state, and interior cargo of capsid. We then discuss many of the applications used in research today and the potential commercial and therapeutic products from engineered viral capsids.     

Packaging of DNA into bacteriophage heads: A model

A model is suggested for the geometry of DNA entry into a bacteriophage head. It accounts for recent observations indicating absence of a unique, ordered sequence of windings in the packaged DNA.     

Osmotic shock and the strength of viral capsids

Osmotic shock is a familiar means for rupturing viral capsids and exposing their genomes intact. The necessary conditions for providing this shock involve incubation in high-concentration salt solutions, and lower permeability of the capsids to salt ions than to water molecules. We discuss here how values of the capsid strength can be inferred from calculations of the osmotic pressure differences associated with measured values of the critical concentration of incubation solution.     

Extent of protein-protein interactions and quasi-equivalence in viral capsids

Viral capsids are composed of multiple copies of one or a few gene products that self-assemble on their own or in the presence of the viral genome and/or auxiliary proteins into closed shells (capsids). We have analyzed 75 high-resolution virus capsid structures by calculating the average fraction of the solvent-accessible surface area of the coat protein subunits buried in the viral capsids. This fraction ranges from 0 to 1 and represents a normalized protein-protein interaction (PPI) index and is a measure of the extent of protein-protein interactions. The PPI indices were used to compare the extent of association of subunits among different capsids. We further examined the variation of the PPI indices as a function of the molecular weight of the coat protein subunit and the capsid diameter. Our results suggest that the PPI indices in T=1 and pseudo-T=3 capsids vary linearly with the molecular weight of the subunit and capsid size. This is in contrast to quasi-equivalent capsids with T>or=3, where the extent of protein-protein interactions is relatively independent of the subunit and capsid sizes. The striking outcome of this analysis is the distinctive clustering of the "T=2" capsids, which are distinguished by higher subunit molecular weights and a much lower degree of protein-protein interactions. Furthermore, the calculated residual (R(sym)) of the fraction buried surface areas of the structurally unique subunits in capsids with T>1 was used to calculate the quasi-equivalence of different subunit environments.     

A novel method to produce armored double-stranded DNA by encapsulation of MS2 viral capsids

With the rapid development of molecular diagnostic techniques, there is a growing need for quality controls and standards with favorable properties to monitor the entire detection process. In this study, we describe a novel method to produce armored hepatitis B virus (HBV) and human papillomavirus (HPV) DNA for use in nucleic acid tests, which was confirmed to be stable, homogeneous, noninfectious, nuclease resistant, and safe for shipping. We demonstrated that MS2 bacteriophage could successfully package double-stranded DNA of 1.3-, 3-, 3.5-, and 6.5-kb length into viral capsids with high reassembly efficiency. This is the first application of RNA bacteriophage MS2 as a platform to encapsulate double-stranded DNA, forming virus-like particles (VLPs) which were indistinguishable from native MS2 capsids in size and morphology. Moreover, by analyzing the interaction mechanism of pac site and the MS2 coat protein (CP), we found that in addition to the recognized initiation signal TR-RNA, TR-DNA can also trigger spontaneous reassembly of CP dimers, providing a more convenient and feasible method of assembly. In conclusion, this straightforward and reliable manufacturing approach makes armored DNA an ideal control and standard for use in clinical laboratory tests and diagnostics, possessing prospects for broad application, especially providing a new platform for the production of quality controls for DNA viruses.     

Unmasking imaging forces on soft biological samples in liquids when using dynamic atomic force microscopy: a case study on viral capsids

Dynamic atomic force microscopy is widely used for the imaging of soft biological materials in liquid environments; yet very little is known about the peak forces exerted by the oscillating probe tapping on the sample in liquid environments. In this article, we combine theory and experiments in liquid on virus capsids to propose scaling laws for peak interaction forces exerted on soft samples in liquid environments. We demonstrate how these laws can be used to choose probes and operating conditions to minimize imaging forces and thereby robustly image fragile biological samples.     

DNA helicase-mediated packaging of adeno-associated virus type 2 genomes into preformed capsids.

Helicases not only catalyse the disruption of hydrogen bonding between complementary regions of nucleic acids, but also move along nucleic acid strands in a polar fashion. Here we show that the Rep52 and Rep40 proteins of adeno-associated virus type 2 (AAV-2) are required to translocate capsid-associated, single-stranded DNA genomes into preformed empty AAV-2 capsids, and that the DNA helicase function of Rep52/40 is essential for this process. Furthermore, DNase protection experiments suggest that insertion of AAV-2 genomes proceeds from the 3' end, which correlates with the 3'-->5' processivity demonstrated for the Rep52/40 helicase. A model is proposed in which capsid-immobilized helicase complexes act as molecular motors to 'pump' single-stranded DNA across the capsid boundary.     

Spiroiminodihydantoin lesions derived from guanine oxidation: structures, energetics, and functional implications

Reactive oxygen species present in the cell generate DNA damage. One of the major oxidation products of guanine in DNA, 8-oxo-7,8-dihydroguanine, formed by loss of two electrons, is among the most extensively studied base lesions. The further removal of two electrons from this product can yield spiroiminodihydantoin (Sp) R and S stereoisomers. Both in vitro and in vivo experiments have shown that the Sp stereoisomers are highly mutagenic, causing G --> T and G --> C transversions. Hence, they are of interest as examples of endogenous DNA damage that may initiate cancer. To interpret the mutagenic properties of the Sp lesions, an understanding of their structural properties is needed. To elucidate these structural effects, we have carried out computational investigations at the level of the Sp-modified base and nucleoside. At the base level, quantum mechanical geometry optimization studies have revealed exact mirror image symmetry of the R and S stereoisomers, with a near-perpendicular geometry of the two rings. At the nucleoside level, an extensive survey of the potential energy surface by molecular mechanics calculations using AMBER has provided three-dimensional potential energy maps. These maps reveal that the range and flexibility of the glycosidic torsion angles are significantly more restricted in both stereoisomeric adducts than in unmodified 2'-deoxyguanosine. The structural and energetic results suggest that the unusual geometric, steric, and hydrogen bonding properties of these lesions underlie their mutagenicity. In addition, stereoisomer-specific differences indicate the possibility that their processing by cellular replication and repair enzymes may be differentially affected by their absolute configuration.