Detection of a phosphorylated glycine-serine linker in an IgG-based fusion protein

Molecular mass determination by electrospray ionization mass spectrometry of a recombinant IgG-based fusion protein (mAb1-F) produced in human embryonic kidney (HEK) cells demonstrated the presence of a dominant +79 Da product variant. Using LC-MS tryptic peptide mapping analysis and collision-induced dissociation (CID) and electron-transfer/higher-energy collision dissociation fragmentations, the modification was localized to the C-terminal serine residue of a glycine-serine linker [(G₄S)₂] of a fused heavy chain containing in total 2 (G₄S)₂-linkers. The modification was identified as a phosphorylation (+79.97 Da) by the presence of a 98 Da neutral loss reaction with CID, by spiking a synthetic phosphoserine peptide, and by dephosphorylation with alkaline phosphatase. A thermolysin digest combined with higher-energy collision dissociation (HCD) positioned the phosphoserine to one specific glycine-serine linker of the fused heavy chain, and the relative level of phosphorylated linker was determined to be 11.3% and 0.4% by LC-MS when the fusion protein was transiently expressed in HEK or in stably transformed Chinese hamster ovary cells, respectively. This observation demonstrates that fusions with glycine-serine linker sequences should be carefully evaluated during drug development to prevent the introduction of a phosphorylation site in therapeutic fusion proteins.     

Combining low- and high-energy tandem mass spectra for optimized peptide quantification with isobaric tags

Isobaric tagging, via TMT or iTRAQ, is widely used in quantitative proteomics. To date, tandem mass spectrometric analysis of isobarically-labeled peptides with hybrid ion trap–orbitrap (LTQ-OT) instruments has been mainly carried out with higher-energy C-trap dissociation (HCD) or pulsed q dissociation (PQD). HCD provides good fragmentation of the reporter-ions, but peptide sequence-ion recovery is generally poor compared to collision-induced dissociation (CID). Herein, we describe an approach where CID and HCD spectra are combined. The approach ensures efficiently both identification and relative quantification of proteins. Tandem mass tags (TMTs) were used to label digests of human plasma and LC-MS/MS was performed with an LTQ-OT instrument. Different HCD collision energies were tested. The benefits to use CID and HCD with respect to HCD alone were demonstrated in terms of number of identifications, subsequent number of quantifiable proteins, and quantification accuracy. A program was developed to merge the peptide sequence-ion m/z range from CID spectra and the reporter-ion m/z range from HCD spectra, and alternatively to separate both spectral data into different files. As parallel CID in the LTQ almost doesn't affect the analysis duty cycle, the procedure should become a standard for quantitative analyses of proteins with isobaric tagging using LTQ-OT instruments.     

Low mass cutoff evasion with qz value optimization in ion trap

An ion trap is a powerful analyzer because of its high resolution, high sensitivity, and multistage mass analysis (MSⁿ) capabilities. Multiple fragmentation analysis provides useful information regarding peptide sequence and biomolecular structure; however, this approach is limited by an inherent low mass cutoff (LMCO) derived from collision-induced dissociation (CID). To avoid the LMCO for application of an ion trap to iTRAQ, we optimized the q_z value, which is a parameter that is proportional to the applied fundamental AC radio frequency voltage of a tandem mass spectrometry (MS/MS) event. Considering that many ion trap MS analyses employ CID as the MS/MS method, this method can be a practical one without any instrumental changes.     

Liquid chromatography-tandem mass spectrometry-based fragmentation analysis of glycopeptides

The use of liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MSⁿ) for the glycoproteomic characterization of glycopeptides is a growing field of research. The N- and O-glycosylated peptides (N- and O-glycopeptides) analyzed typically originate from protease-digested glycoproteins where many of them are expected to be biomedically important. Examples of LC-MS² and MS³ fragmentation strategies used to pursue glycan structure, peptide identity and attachment-site identification analyses of glycopeptides are described in this review. MS² spectra, using the CID and HCD fragmentation techniques of a complex biantennary N-glycopeptide and a core 1 O-glycopeptide, representing two examples of commonly studied glycopeptide types, are presented. A few practical tips for accomplishing glycopeptide analysis using reversed-phase LC-MSⁿ shotgun proteomics settings, together with references to the latest glycoproteomic studies, are presented.     

De novo peptide sequencing using CID and HCD spectra pairs

In tandem mass spectrometry (MS/MS), there are several different fragmentation techniques possible, including, collision‐induced dissociation (CID) higher energy collisional dissociation (HCD), electron‐capture dissociation (ECD), and electron transfer dissociation (ETD). When using pairs of spectra for de novo peptide sequencing, the most popular methods are designed for CID (or HCD) and ECD (or ETD) spectra because of the complementarity between them. Less attention has been paid to the use of CID and HCD spectra pairs. In this study, a new de novo peptide sequencing method is proposed for these spectra pairs. This method includes a CID and HCD spectra merging criterion and a parent mass correction step, along with improvements to our previously proposed algorithm for sequencing merged spectra. Three pairs of spectral datasets were used to investigate and compare the performance of the proposed method with other existing methods designed for single spectrum (HCD or CID) sequencing. Experimental results showed that full‐length peptide sequencing accuracy was increased significantly by using spectra pairs in the proposed method, with the highest accuracy reaching 81.31%.     

Preferred side‐chain conformation of arginine residues in a triple‐helical structure

The crystal structure of the triple‐helical peptide (Pro‐Hyp‐Gly)₃‐Pro‐Arg‐Gly‐(Pro‐Hyp‐Gly)₄ (POG3‐PRG‐POG4) was determined at 1.45 Å resolution. POG3‐PRG‐POG4 was designed to permit investigation of the side‐chain conformation of the Arg residues in a triple‐helical structure. Because of the alternative structure of one of three Arg residues, four side‐chain conformations were observed in an asymmetric unit. Among them, three adopt a ttg^?t conformation and the other adopts a tg^?g^?t conformation. A statistical analysis of 80 Arg residues in various triple‐helical peptides showed that, unlike those in globular proteins, they preferentially adopt a tt conformation for χ₁ and χ₂, as observed in POG3‐PRG‐POG4. This conformation permits van der Waals contacts between the side‐chain atoms of Arg and the main‐chain atoms of the adjacent strand in the same molecule. Unlike many other host–guest peptides, in which there is a significant difference between the helical twists in the guest and the host peptides, POG3‐PRG‐POG4 shows a marked difference between the helical twists in the N‐terminal peptide and those in the C‐terminal peptide, separated near the Arg residue. This suggested that the unique side‐chain conformation of the Arg residue affects not only the conformation of the guest peptide, but also the conformation of the peptide away from the Arg residue. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 1000–1009, 2014.     

Evaluation of HCD- and CID-type fragmentation within their respective detection platforms for murine phosphoproteomics

Protein phosphorylation modulates a myriad of biological functions, and its regulation is vital for proper cellular activity. Mass spectrometry is the enabling tool for phosphopeptide analysis, where recent instrumentation advances in both speed and sensitivity in linear ion trap and orbitrap technologies may yield more comprehensive phosphoproteomic analyses in less time. Protein phosphorylation analysis by MS relies on structural information derived through controlled peptide fragmentation. Compared with traditional, ion-trap-based collision-induced dissociation (CID), a more recent type of fragmentation termed HCD (higher energy collisional dissociation) provides beam type CID tandem MS with detection of fragment ions at high resolution in the orbitrap mass analyzer. Here we compared HCD to traditional CID for large-scale phosphorylation analyses of murine brain under three separate experimental conditions. These included a same-precursor analysis where CID and HCD scans were performed back-to-back, separate analyses of a phosphotyrosine peptide immunoprecipitation experiment, and separate whole phosphoproteome analyses. HCD generally provided higher search engine scores with more peptides identified, thus out-performing CID for back-to-back experiments for most metrics tested. However, for phosphotyrosine IPs and in a full phosphoproteome study of mouse brain, the greater acquisition speed of CID-only analyses provided larger data sets. We reconciled our results with those in direct contradiction from Nagaraj N, D'Souza RCJ et al. (J. Proteome Res. 9:6786, 2010). We conclude, for large-scale phosphoproteomics, CID fragmentation with rapid detection in the ion trap still produced substantially richer data sets, but the back-to-back experiments demonstrated the promise of HCD and orbitrap detection for the future.     

A chemical and computational approach to comprehensive glycation characterization on antibodies

Non-enzymatic glycation is a challenging post-translational modification to characterize due to the structural heterogeneity it generates in proteins. Glycation has become increasingly recognized as an important product quality attribute to monitor, particularly for the biotechnology sector, which produces recombinant proteins under conditions that are amenable to protein glycation. The elucidation of sites of glycation can be problematic using conventional collision-induced dissociation (CID)-based mass spectrometry because of the predominance of neutral loss ions. A method to characterize glycation using an IgG1 monoclonal antibody (mAb) as a model is reported here. The sugars present on this mAb were derivatized using sodium borohydride chemistry to stabilize the linkage and identified using CID-based MS² mass spectrometry and spectral search engines. Quantification of specific glycation sites was then done using a targeted MS¹ based approach, which allowed the identification of a glycation hot spot in the heavy chain complementarity-determining region 3 of the mAb. This targeted approach provided a path forward to developing a structural understanding of the propensity of sites to become glycated on mAbs. Through structural analysis we propose a model in which the number and 3-dimensional distances of carboxylic acid amino acyl residues create a favorable environment for glycation to occur.     

ETISEQ – an algorithm for automated elution time ion sequencing of concurrently fragmented peptides for mass spectrometry-based proteomics

Background  

Concurrent peptide fragmentation (i.e. shotgun CID, parallel CID or MS^E) has emerged as an alternative to data-dependent acquisition in generating peptide fragmentation data in LC-MS/MS proteomics experiments. Concurrent peptide fragmentation data acquisition has been shown to be advantageous over data-dependent acquisition by providing greater detection dynamic range and providing more accurate quantitative information. Nevertheless, concurrent peptide fragmentation data acquisition remains to be widely adopted due to the lack of published algorithms designed specifically to process or interpret such data acquired on any mass spectrometer.     

High‐resolution structures of collagen‐like peptides [(Pro‐Pro‐Gly)4‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)4]: Implications for triple‐helix hydration and Hyp(X) puckering

Structures of (Pro‐Pro‐Gly)₄‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)₄ (ppg9‐XYG) where (Xaa, Yaa) = (Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro‐Pro‐Gly)₉ peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down‐puckering conformation, as in ppg9‐OPG, and ppg9‐OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up‐puckering conformation if there is no specific reason to adopt the down‐puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9‐XYG peptides is very large, likely due to the unique rod‐like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 361–372, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Coupling of fully automated chip-based electrospray ionization to high-capacity ion trap mass spectrometer for ganglioside analysis

NanoMate robot was coupled to a high-capacity ion trap (HCT) mass spectrometer to create a system merging automatic chip-based electrospray ionization (ESI) infusion, ultrafast ion detection, and multistage sequencing at superior sensitivity. The interface between the NanoMate and HCT mass spectrometer consists of an in-laboratory constructed mounting device that allows adjustment of the robot position with respect to the mass spectrometer inlet. The coupling was optimized for ganglioside (GG) high-throughput analysis in the negative ion mode and was implemented in clinical glycolipidomics for identification and structural characterization of anencephaly-associated species. By NanoMate HCT mass spectrometry (MS), data corroborating significant differences in GG expression in anencephalic versus age-matched normal brain tissue were collected. The feasibility of chip-based nanoESI HCT multistage collision-induced dissociation (CID MSⁿ) for polysialylated GG fragmentation and isomer discrimination was tested on a GT1 (d18:1/18:0) anencephaly-associated structure. MS²-MS⁴ obtained by accumulating scans at variable fragmentation amplitudes gave rise to the first fragmentation patterns from which the presence of GT1b structural isomer could be determined unequivocally without the need for supplementary investigation by any other analytical or biochemical methods.     

Synthesis of 13C7-labeled iodoacetanilide and application to quantitative analysis of peptides and a protein by isotope differential mass spectrometry

¹³C₇-Labeled iodoacetanilide has been synthesized for specific labeling of sulfhydryl groups of cysteine residues and has been successfully applied to quantitative analysis of peptides and a commercial protein in combination with ¹³C-unlabeled iodoacetanilide and a MALDI mass spectrometer. Subsequent tandem mass spectrum analysis revealed that ¹³C₇-labeled iodoacetanilide remained intact during the collision-induced dissociation (CID) conditions.     

iTRAQ-based profiling of grape berry exocarp proteins during ripening using a parallel mass spectrometric method

The 4-plex iTRAQ platform was utilized to analyze the protein profiles in four stages of grapevine berry skin ripening, from pre-veraison to fully ripening. Mass spectrometric data were acquired from three replicated analyses using a parallel acquisition method in an Orbitrap instrument by combining collision-induced dissociation (CID) and higher energy collision-induced dissociation (HCD) peptide ion fragmentations. As a result, the number of spectra suitable for peptide identification (either from CID or HCD) increased 5-fold in relation to those suitable for quantification (from HCD). Spectra were searched against an NCBInr protein database subset containing all the Vitis sequences, including those derived from whole genome sequencing. In general, 695 unique proteins were identified with more than one single peptide, and 513 of them were quantified. The sequence annotation and GO term enrichment analysis assisted by the automatic annotation tool Blast2GO permitted a pathway analysis which resulted in finding that biological processes and metabolic pathways de-regulated throughout ripening. A detailed analysis of the function-related proteins profiles helped discover a set of proteins of known Vitis gene origin as the potential candidates to play key roles in grapevine berry quality, growth regulation and disease resistance.     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Global combined precursor isotopic labeling and isobaric tagging (cPILOT) approach with selective MS3 acquisition

Recently, we reported a novel proteomics quantitation scheme termed “combined precursor isotopic labeling and isobaric tagging (cPILOT)” that allows for the identification and quantitation of nitrated peptides in as many as 12–16 samples in a single experiment. cPILOT offers enhanced multiplexing and posttranslational modification specificity, however excludes global quantitation for all peptides present in a mixture and underestimates reporter ion ratios similar to other isobaric tagging methods due to precursor co‐isolation. Here, we present a novel chemical workflow for cPILOT that can be used for global tagging of all peptides in a mixture. Specifically, through low pH precursor dimethylation of tryptic or LysC peptides followed by high pH tandem mass tags, the same reporter ion can be used twice in a single experiment. Also, to improve triple‐stage mass spectrometry (MS³) data acquisition, a selective MS³ method that focuses on product selection of the y₁ fragment of lysine‐terminated peptides is incorporated into the workflow. This novel cPILOT workflow has potential for global peptide quantitation that could lead to enhanced sample multiplexing and increase the number of quantifiable spectra obtained from MS³ acquisition methods.     

Effectiveness of CID, HCD, and ETD with FT MS/MS for degradomic-peptidomic analysis: comparison of peptide identification methods

We report on the effectiveness of CID, HCD, and ETD for LC-FT MS/MS analysis of peptides using a tandem linear ion trap-Orbitrap mass spectrometer. A range of software tools and analysis parameters were employed to explore the use of CID, HCD, and ETD to identify peptides (isolated from human blood plasma) without the use of specific "enzyme rules". In the evaluation of an FDR-controlled SEQUEST scoring method, the use of accurate masses for fragments increased the number of identified peptides (by ~50%) compared to the use of conventional low accuracy fragment mass information, and CID provided the largest contribution to the identified peptide data sets compared to HCD and ETD. The FDR-controlled Mascot scoring method provided significantly fewer peptide identifications than SEQUEST (by 1.3-2.3 fold) and CID, HCD, and ETD provided similar contributions to identified peptides. Evaluation of de novo sequencing and the UStags method for more intense fragment ions revealed that HCD afforded more contiguous residues (e.g., ≥ 7 amino acids) than either CID or ETD. Both the FDR-controlled SEQUEST and Mascot scoring methods provided peptide data sets that were affected by the decoy database used and mass tolerances applied (e.g., identical peptides between data sets could be limited to ~70%), while the UStags method provided the most consistent peptide data sets (>90% overlap). The m/z ranges in which CID, HCD, and ETD contributed the largest number of peptide identifications were substantially overlapping. This work suggests that the three peptide ion fragmentation methods are complementary and that maximizing the number of peptide identifications benefits significantly from a careful match with the informatics tools and methods applied. These results also suggest that the decoy strategy may inaccurately estimate identification FDRs.     

Characterization of the iron-binding properties of pyoverdine using electron-capture dissociation-tandem mass spectrometry

Pyoverdines (PVD) are a group of siderophores produced by fluorescent Pseudomonads. Identification of PVD variants mostly relies on liquid chromatography-tandem mass spectrometry (LC–MS/MS) using collision-induced dissociation (CID). Here, both CID and the novel dissociation technique electron-capture dissociation (ECD) were applied to characterize PVD succinamide and its Fe(III)-chelated complex. The results clearly showed that ECD produced diagnostic side chain fragmentation of the PVD peptide chain and preserved the labile Fe(III) binding to the chromophore in contrast to CID. The ECD technique is therefore expected to support the understanding of strain-specific Fe(III) transport processes of PVDs.     

Crystal structure of the collagen model peptide (Pro‐Pro‐Gly)4‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)4 at 1.0 Å resolution

The single‐crystal structure of the collagen‐like peptide (Pro‐Pro‐Gly)₄‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)₄, was analyzed at 1.02 Å resolution. The overall average helical twist (θ = 49.6°) suggests that this peptide adopts a 7/2 triple‐helical structure and that its conformation is very similar to that of (Gly‐Pro‐Hyp)₉, which has the typical repeating sequence in collagen. High‐resolution studies on other collagen‐like peptides have shown that imino acid‐rich sequences preferentially adopt a 7/2 triple‐helical structure (θ = 51.4°), whereas imino acid‐lean sequences adopt relaxed conformations (θ < 51.4°). The guest Gly‐Hyp‐Asp sequence in the present peptide, however, has a large helical twist (θ = 61.1°), whereas that of the host Pro‐Pro‐Gly sequence is small (θ = 46.7°), indicating that the relationship between the helical conformation and the amino acid sequence of such peptides is complex. In the present structure, a strong intermolecular hydrogen bond between two Asp residues on the A and B strands might induce the large helical twist of the guest sequence; this is compensated by a reduced helical twist in the host, so that an overall 7/2‐helical symmetry is maintained. The Asp residue in the C strand might interact electrostatically with the N‐terminus of an adjacent molecule, causing axial displacement, reminiscent of the D‐staggered structure in fibrous collagens. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 436–447, 2013.     

Crystal structure of (Gly-Pro-Hyp)(9) : implications for the collagen molecular model

Collagens have long been believed to adopt a triple‐stranded molecular structure with a 10/3 symmetry (ten triplet units in three turns) and an axial repeat of 29 Å. This belief even persisted after an alternative structure with a 7/2 symmetry (seven triplet units in two turns) with an axial repeat of 20 Å had been proposed. The uncertainty regarding the helical symmetry of collagens is attributed to inadequate X‐ray fiber diffraction data. Therefore, for better understanding of the collagen helix, single‐crystal analyses of peptides with simplified characteristic amino acid sequences and similar compositions to collagens have long been awaited. Here we report the crystal structure of (Gly‐Pro‐Hyp)₉ peptide at a resolution of 1.45 Å. The repeating unit of this peptide, Gly‐Pro‐Hyp, is the most typical sequence present in collagens, and it has been used as a basic repeating unit in fiber diffraction analyses of collagen. The (Gly‐Pro‐Hyp)₉ peptide adopts a triple‐stranded structure with an average helical symmetry close to the ideal 7/2 helical model for collagen. This observation strongly suggests that the average molecular structure of collagen is not the accepted Rich and Crick 10/3 helical model but is a 7/2 helical conformation. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 607–616, 2012.     

A high-resolution 13C-nmr study of collagenlike polypeptides and collagen fibrils in solid state studied by the cross-polarization–magic angle-spinning method. Manifestation of conformation-dependent 13C chemical shifts and application to conformational characterization

We have recorded high-resolution ¹³C-nmr spectra of collagen fibrils in the solid state by the cross-polarization–magic-angle-spinning(CP–MAS)method and analyzed the spectra with reference to those of collagenlike polypeptides. We used two kinds of model polypeptides to obtain reference ¹³C chemical shifts of major amino acid residues of collagen (Gly, Pro, Ala, and Hyp): the 3₁-helical polypeptides [(Gly)_nII, (Pro)_nII, (Hyp)_n, and (Ala? Gly? Gly)_nII], and the triple-helical polypeptides [(Pro? Gly? Pro)_n and (Pro? Ala? Gly)_n]. Examination of the ¹³C chemical shifts of these polypeptides, together with our previous data, showed that the ¹³C chemical shifts of individual amino acid residues are the same, within experimental error (±0.5 ppm), among different polypeptides with different primary sequences, if the conformations are the same. We found that the ¹³C chemical shifts of Ala residues of the 3₁-helical (Ala? Gly? Gly)_n and triple-helical (Pro? Ala? Gly)_n are significantly displaced, compared with those of the α-helix, β-sheet, and silk I form, and can be utilized as excellent probes to examine conformational features of collagen-like polypeptides. Further, the ¹³C chemical shifts of Gly and Pro residues in the triple-helical polypeptides are substantially displaced from those found in (Gly)_nII and (Pro)_nII of the 3₁-helix, reflecting further conformational change from the 3₁-helix to the supercoiled triple helix. In particular, the ¹³C chemical shifts of Gly C ? O carbons of the triple-helical polypeptides are substantially displaced upfield (4.1–5.1 ppm), with respect to those of the 3₁-helical polypeptides. These displacements are interpreted by that Gly C ? O of the former is not involved in NH …? O ? C hydrogen bonds, while this carbon of the latter is linked by these kinds of hydrogen bonds. On the basis of these ¹³C chemical shifts, as reference data for the collagenlike structure, we were able to assign the ¹³C-nmr peaks of Gly, Ala, Pro, and Hyp residues of collagen fibrils, which are in good agreement with the values expected from the model polypeptides mentioned above. We also discuss a plausible conformational change of collagen fibrils during denaturation.