Removal of lead from aqueous solutions by agricultural waste maize bran

Maize bran is a low cost biosorbent that has been used for the removal of lead(II) from an aqueous solution. The effects of various parameters such as contact time, adsorbate concentration, pH of the medium and temperature were examined. Optimum removal at 20 degrees C was found to be 98.4% at pH 6.5, with an initial Pb(II) concentration of 100 mg l(-1). Dynamics of the sorption process and mass transfer of Pb(II) to maize bran were investigated and the values of rate constant of adsorption, rate constant of intraparticle diffusion and the mass transfer coefficients were calculated. Different thermodynamic parameters viz., changes in standard free energy, enthalpy and entropy were evaluated and it was found that the reaction was spontaneous and exothermic in nature. The adsorption data fitted the Langmuir isotherm. A generalized empirical model was proposed for the kinetics at different initial concentrations. The data were subjected to multiple regression analysis and a model was developed to predict the removal of Pb(II) from an aqueous solution.     

Kinetic modeling and equilibrium studies during cadmium biosorption by dead Sargassum sp. biomass

A basic investigation on the removal of cadmium(II) ions from aqueous solutions by dead Sargassum sp. was conducted in batch conditions. The influence of different experimental parameters; initial pH, shaking rate, sorption time, temperature and initial concentrations of cadmium ions on cadmium uptake was evaluated. Results indicated that cadmium uptake could be described by the Langmuir adsorption model, being the monolayer capacity negatively affected with an increase in temperature. Analogously, the adsorption equilibrium constant decreased with increasing temperature. The kinetics of the adsorption process followed a second-order adsorption, with characteristic constants increasing with increasing temperature. Activation energy of biosorption could be calculated as equal to 10 kcal/mol. The biomass used proved to be suitable for removal of cadmium from dilute solutions. Its maximum uptake capacity was 120 mg/g. It can be considered an optimal result when compared to conventional adsorbing materials. Thus Sargassum sp. has great potential for removing cadmium ions especially when concentration of this metal is low in samples such as wastewater streams.     

Biosorption of cadmium (II) ions by immobilized cells of Pycnoporus sanguineus from aqueous solution

Biosorption of cadmium (II) ions from aqueous solution onto immobilized cells of Pycnoporus sanguineus (P. sanguineus) was investigated in a batch system. Equilibrium and kinetic studies were conducted by considering the effect of pH, initial cadmium (II) concentration, biomass loading and temperature. Results showed that the uptake of cadmium (II) ions increased with the increase of initial cadmium (II) concentration, pH and temperature. Langmuir, Freundlich and Redlich-Peterson isotherm models were used to analyze the equilibrium data at different temperatures. Langmuir isotherm model described the experimental data well followed by Redlich-Peterson and Freundlich isotherm models. Biosorption kinetics data were fitted using pseudo-first, pseudo-second-order and intraparticle diffusion. It was found that the kinetics data fitted well the pseudo-second-order followed by intraparticle diffusion. Thermodynamic parameters such as standard Gibbs free energy (Delta G0), standard enthalpy (Delta H0) and standard entropy (Delta S0) were evaluated. The result showed that biosorption of cadmium (II) ions onto immobilized cells of P. sanguineus was spontaneous and endothermic nature.     

Cadmium removal from water environment by a fungus Volveriella volvacea

Biosorption technique was used for removal of cadmium under different conditions from water environment using a biosorbent, Volveriella volvaceas, locally growing fruit bodies of mushroom. Effects of different parameters like pH, sorbent concentration, ionic strength on the removal efficiency of cadmium by V. volvacea were carried out in continuation with adsorption kinetics and equilibrium isotherm experiments. From the kinetics studies it was found that nearly 95% of the total cadmium removal was achieved from cadmium spiked distilled water within first 15 minutes. Isotherm data was best fitted to linearised Langmuir equation and the sorption capacity was found to be varying from 9.13 to 9.33 mg/g for different sizes of sorbent. The uptake of cadmium(II) is a function of pH of the solution and increases with the increasing pH. Increasing ionic strength and the presence of soluble complexing agents such as ethylene diamine tetraacetic acid (EDTA) decrease the sorption of cadmium (II). The presence of other diavalent cations like calcium and magnesium impedes the uptake of cadmium (II). The presence of chloride ion has no significant effect on cadmium (II) removal. The spent biosorbent can effectively be regenerated with acid and can then be reused.The present work was carried out by the financial support in terms of fellowship under the cultural exchange programme of the Indo-Bangladesh government. Special thanks to the Director, Bangladesh Institute of Technology, Dhaka, Bangladesh, for providing leave, which enabled the author in carrying out the research work.     

Hexavalent chromium removal from aqueous solution by adsorption on treated sawdust

The studies on adsorption of hexavalent chromium were conducted by varying various parameters such as contact time, pH, amount of adsorbent, concentration of adsorbate and temperature. The kinetics of adsorption of Cr(VI) ion followed pseudo second order. Langmuir adsorption isotherm was employed in order to evaluate the optimum adsorption capacity of the adsorbent. The adsorption capacity was found to be pH dependant. Sawdust was found to be very effective and reached equilibrium in 3 h (adsorbate concentration 30 mg l⁻¹). The rate constant has been calculated at 303, 308, 313 and 318 K and the activation energy (E_a) was calculated using the Arrhenius equation. Thermodynamic parameters such as standard Gibbs energy (ΔG°) and heat of adsorption (ΔH_r) were calculated. The ΔG° and ΔH_r values for Cr(VI) adsorption on the sawdust showed the process to be exothermic in nature. The percentage of adsorption increased with decrease in pH and showed maximum removal of Cr(VI) in the pH range 4.5–6.5 for an initial concentration of 5 mg l⁻¹.     

Heavy metal biosorption by biomass of Ochrobactrum anthropi producing exopolysaccharide in activated sludge

The removal of chromium, cadmium and copper, toxic metals of high environmental priority due to their toxicity, from dilute aqueous solutions has been studied in the present work, applying a dead exopolysaccharide producing bacterium, Ochrobactrum anthropi, isolated from activated sludge. Particularly, the effect of pH, metal concentration and the effects of contact time were considered. Optimum adsorption pH values of chromium(VI), cadmium(II) and copper(II) were 2.0, 8.0 and 3.0 respectively. Experimental results also showed the influence of initial metal concentration on the metal uptake for dried biomass. Both the Freundlich and Langmuir adsorption models were suitable for describing the short-term biosorption of chromium(VI), cadmium(II) and copper(II) by O. anthropi.     

Washing of Cadmium(II) from a Contaminated Soil Column

The washing of cadmium (from CdO_(s)) from a soil column employing either an acid solution or EDTA (a strong metal chelator) was examined. For Cd(II) levels of 50 to 1000 mg/kg, the fraction removed was essentially independent of the initial Cd(II) concentration. The most efficient washing of cadmium was achieved using an acid wash solution at pH 2.5. Lower Cd(II) removals were found at lower pH, apparently due to inhibition of CdO_(s) dissolution by constituents released from the soil under highly acidic conditions. EDTA wash solutions were employed at EDTA:cadmium molar ratios ranging from 1:1 to 10:1. Up to 90% removal of total Cd(II) was achieved at the 10:1 ratio after the passage of the first 50?PV of wash solution. Although higher chelate levels enhanced Cd(II) removal, the utilization efficiency of EDTA for cadmium decreased.     

Biosorptive removal of cadmium from contaminated groundwater and industrial effluents

The cadmium removing capacity of a biosorbent Calotropis procera, a perennial wild plant, is reported here. The biomass was found to possess high uptake capacity of Cd(II). Adsorption was pH dependent and the maximum removal was obtained at two different pH i.e. pH 5.0 and 8.0. Maximum biosorption capacity in batch and column mode was found to be 40 and 50.5 mg/g. The adsorption equilibrium (> or =90% removal) was attained within 5 min irrespective of the cadmium ion concentration. Interfering ions viz. Zn(II), As(III), Fe(II), Ni(II) interfered only when their concentration was higher than the equimolar ratio. The Freundlich isotherm best explained the adsorption, yet the monolayer adsorption was also noted at lower concentrations of Cd(II). The FTIR analysis indicates the involvement of hydroxyl (-OH), alkanes (-CH), nitrite (-NO(2)), and carboxyl group (-COO) chelates in metal binding. The complete desorption of the cadmium was achieved by 0.1M H(2)SO(4) and 0.1M HCl. The C. procera based Cd(II) removal technology appears feasible.     

Continuous removal of malathion by immobilised biomass of Bacillus species S14 using a packed bed column reactor

Abstract

Biosorption of malathion from aqueous solution was studied using Bacillus sp. S₁₄ immobilised on calcium alginate (3%) using a packed bed column reactor at a temperature of 25 °C and a pH of 7.0. The experiments were conducted to study the effect of important design parameters such as bed height, flow rate and influent malathion concentration. Maximum removal capacity (57%) was found at 4 mL min^-1 flow rate, 6.0 cm bed height and 25 mg L^-1 influent malathion concentration. The Adam-Bohart model, Wolborska model, Thomas model, Yoon-Nelson model were employed to determine characteristic parameters such as saturation concentration, external mass transfer coefficient, Thomas rate constant, the maximum solid phase concentration of the solute, rate constant, and the time required for 50% adsorbate breakthrough time, which are all useful for process design. Experimental data were well fitted with Adam–Bohart model at the lower region of effluent/influent malathion concentration values but at higher region values data fitted well with the Thomas and Yoon-Nelson models.     

Kinetics of biosorption of cadmium on Baker's yeast

In the present study the kinetics of biosorption of cadmium(II) ions by deactivated protonated yeast converted to sodium form was investigated for different initial concentrations of the metal ion (10-100 ppm) and different sorbent dosages (0.1-2.0 g) at a pH of 6.5. The adsorption process occurred in four distinct steps and the rates for these steps decreased sequentially. The rate of cadmium uptake in each case was pseudo-second-order with respect to metal ion concentration. The amount sorbed at equilibrium was found to be directly proportional to the initial metal ion concentration divided by the sorbent mass.     

Application of Freundlich and Langmuir models to multistage purification process to remove heavy metal ions by using Schizomeris leibleinii

The adsorption of iron(III), lead(II) and cadmium(II) ions onto Schizomeris leibleinii, a green alga, was studied with respect to initial pH, temperature, initial metal ion and biomass concentration to determine the optimum adsorption conditions. Optimum initial pH for iron(III), lead(II) and cadmium(II) ions were 2.5, 4.5 and 5.0 at optimum temperature 30°C, respectively. The initial adsorption rates increased with increasing initial iron(III), lead(II) and cadmium(II) ion concentrations up to 100, 100 and 150 mg l⁻¹, respectively. The Freundlich and Langmuir adsorption isotherms were developed at various initial pH and temperature values. The adsorption of these metal ions to S. leibleinii was investigated in a two-stage mixed batch reactor. The residual metal ion concentrations (C_eq) at equilibrium at each stage for a given ‘quantity of dried algae (X₀)/volume of solution containing heavy metal ion (V₀)’ ratio were calculated using Freundlich and Langmuir isotherm constants. The experimental biosorption equilibrium data for iron(III), lead(II) and cadmium(II) ions were in good agreement with those calculated by both Freundlich and Langmuir models. The adsorbed iron(III), lead(II) and cadmium(II) ion concentrations increased with increasing X₀/V₀ ratios while the adsorbed metal quantities per unit mass of dried algae decreased.     

Preparation and Characterization of Chemically Modified Silk Cotton Hull Activated Carbon and Its Effects on Cd(II) Removal from Aqueous Solutions

The novel biosorbent silk cotton hull, an agrowaste material, has been successfully utilized for the removal of cadmium(II) from aqueous solutions. The adsorption of cadmium onto three kinds of activated biosorbent has been studied: modified by concentrated sulfuric acid alone (AC), a mixture of concentrated sulfuric acid and hydrogen peroxide (AC1), and a mixture of concentrated sulfuric acid and ammonium persulfate (AC2). The adsorption studies were carried out to optimize the process parameters such as pH, adsorbent dosage, contact time, and initial metal ion concentration. Maximum metal removal was observed at pH 7.0 with a contact time of 90 min at stirring speed of 200 rpm with an adsorbent dosage of 4.0 g L^?1. The sorption isotherms were studied using the Langmuir, Freundlich, and Tempkin isotherm models. The maximum adsorption capacities were 100.00, 142.86, and 142.87 mg g^?1 for AC, AC1, and AC2, respectively. Accordingly, the surface modification of the activated carbons AC1 and AC2 enhanced cadmium removal greatly. The experiments demonstrated that the removal of metal ions followed the pseudo-second-order kinetic model. The sorption mechanism is discussed in terms of the activated surface properties. A relationship between the oxygen content and sorption was found in this novel material. Desorption experiments were carried out using hydrochloric acid with a view to generate the spent adsorbent and to recover the adsorbed metal ions.     

Simultaneous cadmium removal and 2,4-dichlorophenol degradation from aqueous solutions by Phanerochaete chrysosporium

Phanerochaete chrysosporium has been recognised as an effective bioremediation agent due to its unique degradation to xenobiotic and biosorption ability to heavy metals. However, few studies have focused on the simultaneous removal of heavy metals and organic pollutants. The aim of this work was to study the feasibility of simultaneous cadmium removal and 2,4-dichlorophenol (2,4-DCP) degradation in P. chrysosporium liquid cultures. The removal efficiencies were pH dependent and the maximum removal efficiencies were observed at pH 6.5 under an initial cadmium concentration of 5 mg/L and an initial 2,4-DCP concentration of 20 mg/L. The removal efficiencies for cadmium and 2,4-DCP reached 63.62% and 83.90%, respectively, under the optimum conditions. The high production levels of lignin peroxidase (7.35 U/mL) and manganese peroxidase (8.30 U/mL) resulted in an increase in 2,4-DCP degradation. The protein content decreased with increasing cadmium concentration. The surface characteristics and functional groups of the biomass were studied by scanning electron microscopy and a Fourier-transformed infrared spectrometer. The results showed that the use of P. chrysosporium is promising for the simultaneous removal of cadmium and 2,4-DCP from liquid media.     

Activated carbon prepared from biomass as adsorbent: elimination of Ni(II) from aqueous solution.

Activated carbon (AC) prepared from waste Parthenium was used to eliminate Ni(lI) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out, by varying contact time, metal ion concentration, carbon concentration, pH and desorption to assess kinetic and equilibrium parameters. They allowed initial adsorption coefficient, adsorption rate constant and maximum adsorption capacities to be computed. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Q0) calculated from the Langmuir isotherm was 54.35 mg Ni(II)/g of AC at initial pH of 5.0 and 20 degrees C, for the particle size 250-500 microm. Increase in pH from 2 to 10 increased percent removal of metal ion. The regeneration by HCl of Ni(II)-saturated carbon by HCl, allowed suggestion of an adsorption mechanism by ion-exchange between metal ion and H+ ions on the AC surfaces. Quantitative recovery of Ni(II) was possible with HCl.     

Removal of cadmium(II) ion from aqueous system by dry biomass, immobilized live and heat-inactivated Oscillatoria sp. H1 isolated from freshwater (Mogan Lake)

Oscillatoria sp. H1 (Cyanobacteria, microalgae) isolated from Mogan Lake was used for the removal of cadmium ions from aqueous solutions as its dry biomass, alive and heat-inactivated immobilized form on Ca-alginate. Particularly, the effect of physicochemical parameters like pH, initial concentration and contact time were investigated. The sorption of Cd(II) ions on the sorbent used was examined for the cadmium concentrations within the range of 25-250 mg/L. The biosorption of Cd(II) increased as the initial concentration of Cd(II) ions increased in the medium up to 100 mg/L. Maximum biosorption capacities for plain alginate beads, dry biomass, immobilized live Oscillatoria sp. H1 and immobilized heat-inactivated Oscillatoria sp. H1 were 21.2, 30.1, 32.2 and 27.5 mg/g, respectively. Biosorption equilibrium was established in about 1 h for the biosorption processes. The biosorption was well described by Langmuir and Freundlich adsorption isotherms. Maximum adsorption was observed at pH 6.0. The alginate-algae beads could be regenerated using 50 mL of 0.1 mol/L HCl solution with about 85% recovery.     

Fibrous polymer-grafted chitosan/clay composite beads as a carrier for immobilization of papain and its usability for mercury elimination

Papain, which is an industrially important enzyme, has been immobilized on fibrous polymer-modified composite beads, namely poly(methacrylic acid)-grafted chitosan/clay. Characterization studies have been done using FTIR and SEM analysis. Operating parameters such as pH and initial concentration of papain have been varied to obtain the finest papain immobilized polymer-modified composite beads. The immobilization capacity of composite beads has been determined as 34.47 ± 1.18 (n = 3) mg/g. The proteolytic activity of immobilized papain was operated using bovine serum albumin (BSA) and maximum velocity (V _max) and Michaelis–Menten constant (K_m) values of the free and immobilized enzymes were determined using Lineweaver–Burk and Eadie–Hofstee equations. Usability of papain immobilized polymer-modified composite beads as adsorbents for the elimination of mercury was investigated. The maximum removal capacity of PIPMC beads has been found to be 4.88 ± 0.21 mg Hg/g when the initial metal concentration and weight of polymer-modified composite beads were 50 mg/L and 0.04 g at pH 7, respectively. Mercury removal performance of the papain immobilized polymer-modified composite beads was investigated in conjunction with Cu (II), Zn (II) and Cd (II) ions. The mercury adsorption capacity of papain immobilized polymer-modified composite beads was a slight reduction from 1.15 to 0.89 mg/g in presence of multiple metal salts.     

Biosorption of Cr (VI) from aqueous solution by Rhizopus nigricans

The study was aimed to quantify the Cr sorption ability of powdered biomass of Rhizopus nigricans at the best operating conditions. The influence of solution pH, agitation, Cr (VI) concentration, biomass dosage, contact time, biomass particle size and temperature were studied. The optimum pH for biosorption of Cr (VI) was found to be 2.0. Higher adsorption percentage was noted at lower initial concentrations of Cr ions, while the adsorption capacity of the biomass increased with increasing concentration of ions. Optimum biomass dosage was observed as 0.5% (w/v). More than 75% of the ions were removed within 30 min of contact and maximum removal was obtained after 8 h. Biomass particles of smaller size (90 microm) gave maximum adsorption (99.2%) at 100 mg/l concentration. The adsorption capacity increased with increase in temperature and agitation speed and the optimum were determined as 45 degrees C at 120 rpm. Freundlich and Langmuir isotherms were used to evaluate the data and the regression constants were derived. The adsorption rate constant values (Kad) were calculated for different initial concentration of Cr ions and the sorption was found to be higher at lower concentration (100 mg/l) of metal ion.     

The efficiency of the red alga Mastocarpus stellatus for remediation of cadmium pollution

This work reports the results of the study for cadmium binding by the dead red macroalga Mastocarpus stellatus. Kinetics sorption experiments demonstrated the high rate of metal biosorption: the system attained over 50% of the total biomass cadmium uptake within 2 min of contact and over 90% in the first 9 min. The kinetic data were successfully described by a pseudo-second order model with rate constants ranging from 1.06 to 10 gmmol(-1)min(-1), as a function of initial metal concentration and temperature. The equilibrium binding was accurately represented in terms of Langmuir and Langmuir-Freundlich models. The sorption isotherms at constant pH showed uptake values as 0.49 mmol g(-1) (at pH 2.4), 0.56 mmol g(-1) (at pH 4) and 0.59 mmol g(-1) (at pH 6), while the affinity constant values were between 0.6 and 5 mmol(-1) L (Langmuir fit). The acid-base properties of the alga were also studied, obtaining the total number of acid groups, 2.5 mmol g(-1), and their apparent pK value, 1.56, using the Katchalsky model. Desorption studies were conducted employing different HNO(3) concentrations and desorption times.     

Equilibrium study of dried orange peel for its efficiency in removal of cupric ions from water

Excess of copper ion (>2 mg/L) in water is toxic to human beings and the ecosystem. Various water treatment technologies for copper remediation have been investigated in the past. Along with industrial effluents, Bordeaux mixture is also a noteworthy copper contamination source in the agricultural ecosystem. In our study, the biosorbent efficiency of dried orange peel was investigated through an environment-friendly process for the removal of cupric ions. Effects of pH, adsorbate concentration, adsorbent dosage, and temperature for the removal of Cu (II) were studied. Slightly acidic environment (pH = 6) was found to be optimum for removal of copper. The equilibrium data were well fitted with the Langmuir and Freundlich isotherms. The surface morphology of the adsorbent was studied using scanning electron microscope. Crystalline nonhomogenous surface was observed after copper adsorption. Desorption study indicated that 0.1N H₂SO₄ is the best eluent for the removal of adsorbed copper from the powdered dried orange peel.     

Characterization of Simultaneous Aerobic Denitrification and Dephosphorization Strain Cupriavidus sp. H29 and Its Application on Cadmium-Removing

Abstract

A cadmium tolerant strain Cupriavidus sp. H29 could be applied on simultaneous removal of nitrate, phosphorus and cadmium. Response surface methodology (RSM) experiments showed that optimal removal ratios of nitrate, phosphate and Cd(II), which reached 98.89%, 75.23% and 85.01%, occurred at Cd(II) initial concentration of 30.00?mg/L, nitrate initial concentration of 55.20?mg/L, phosphate initial concentration of 50.00?mg/L, initial pH of 7.0 and C/N ratio of 6.0. Studies on gaseous product, precipitations and extracellular polymeric substances (EPS) indicated that the removal of Cd(II) occurred in the extracellular place. Through the coordinated complexation of EPS, strain H29 can achieve the bio-induced phosphate-cadmium removal. Moreover, studies on heated cells, resting cells, permeable cells, cells membrane and cytoplasm demonstrated that the removal of Cd(II) mainly taken place on the cells membrane. This study provided the theoretical basis for the subsequent research of synchronous removal of heavy metals and other pollutants.