An Acetobacter xylinum insertion sequence element associated with inactivation of cellulose production.

An insertion sequence (IS) element, IS1031, caused insertions associated with spontaneous cellulose deficient (Cel-) mutants of Acetobacter xylinum ATCC 23769. The element was discovered during hybridization analysis of DNAs from Cel- mutants of A. xylinum ATCC 23769 with pAXC145, an indigenous plasmid from a Cel- mutant of A. xylinum NRCC 17005. An IS element, IS1031B, apparently identical to IS1031, was identified on pAXC145. IS1031 is about 950 bp. DNA sequencing showed that the two elements had identical termini with inverted repeats of 24 bp containing two mismatches and that they generated 3-bp target sequence duplications. The A. xylinum ATCC 23769 wild type carries seven copies of IS1031. Southern hybridization showed that 8 of 17 independently isolated spontaneous Cel- mutants of ATCC 23769 contained insertions of an element homologous to IS1031. Most insertions were in unique sites, indicating low insertion specificity. Significantly, two insertions were 0.5 kb upstream of a recently identified cellulose synthase gene. Attempts to isolate spontaneous cellulose-producing revertants of these two Cel- insertion mutants by selection in static cultures were unsuccessful. Instead, pseudorevertants that made waxlike films in the liquid-air interface were obtained. The two pseudorevertants carried new insertions of an IS1031-like element in nonidentical sites of the genome without excision of the previous insertions. Taken together, these results suggest that indigenous IS elements contribute to genetic instability in A. xylinum. The elements might also be useful as genetic tools in this organism and related species.     

Identification of the uridine 5'-diphosphoglucose (UDP-Glc) binding subunit of cellulose synthase in Acetobacter xylinum using the photoaffinity probe 5-azido-UDP-Glc

Photoaffinity labeling of purified cellulose synthase with [beta-32P]5-azidouridine 5'-diphosphoglucose (UDP-Glc) has been used to identify the UDP-Glc binding subunit of the cellulose synthase from Acetobacter xylinum strain ATCC 53582. The results showed exclusive labeling of an 83-kDa polypeptide. Photoinsertion of [beta-32P]5-azido-UDP-Glc is stimulated by the cellulose synthase activator, bis-(3'----5') cyclic diguanylic acid. Addition of increasing amounts of UDP-Glc prevents photolabeling of the 83-kDa polypeptide. The reversible and photocatalyzed binding of this photoprobe also showed saturation kinetics. These studies demonstrate that the 83-kDa polypeptide is the catalytic subunit of the cellulose synthase in A. xylinum strain ATCC 53582.     

Behavior of cellulose production of Acetobacter xylinum in C-enriched cultivation media including movements on nematic ordered cellulose templates

Acetobacter xylinum NQ-5 (ATCC 53582) and AY-201 (ATCC 23769) cultivated in the Hestrin–Schramm medium containing d-glucose with a natural ¹³C-abundance of 1.1% were investigated regarding their cell division rates and the bacterial movements. Comparative studies were carried out in the presence of d-glucose-U-¹³C₆ with a uniform ¹³C-labeling of 99% as the sole carbon source. The bacterial growth rates in numbers were found to increase in the ¹³C-enriched media by about 13% for NQ-5 and 26% for AY-201, respectively. The movements of single cells caused by the inverse force of the secretion and deposition of cellulose nanofibers on nematic ordered cellulose (NOC) templates were investigated by real-time video analyzes using light microscopy. As a result, d-glucose-U-¹³C₆ reduced the speed of motion for both strains, which was an opposite trend to the above growth rates in the cell division. The deposited cellulose fibers were proved to be in a cellulose crystalline form by CP/MAS ¹³C NMR and NIR FT Raman spectroscopic measurements, although the biosynthesized and thereafter-deposited cellulose has a strong interaction with the surface of NOC.     

A new gene required for cellulose production and a gene encoding cellulolytic activity in Acetobacter xylinum are colocalized with the bcs operon.

Recently, it was shown that a cellulose-negative mutant (Cel1) of Acetobacter xylinum ATCC 23769 carried an insertion of an indigenous transposable element (IS1031A) about 500 bp upstream of the bcs operon, required for cellulose synthesis. Here we show that Cel1 can be complemented by wild-type DNA covering the insertion point. Nucleotide sequencing of this region revealed the presence of two open reading frames, ORF1 and ORF2. ORF2, which is disrupted by the IS1031A insertion in Cel1, potentially encodes the complementing function. ORF1 encodes a protein (CMCax) with significant homology to previously described endoglucanases. A cloned DNA fragment containing ORF1 expressed a carboxymethyl cellulose-hydrolyzing activity in Escherichia coli. In A. xylinum, CMCax is secreted into the culture growth medium. The CMCax mature protein consists of 322 amino acids and has a molecular mass of 35.6 kDa.     

Cloning and sequencing of the beta-glucosidase gene from Acetobacter xylinum ATCC 23769.

The beta-glucosidase gene (bglxA) was cloned from the genomic DNA of Acetobacter xylinum ATCC 23769 and its nucleotide sequence (2200 bp) was determined. This bglxA gene was present downstream of the cellulose synthase operon and coded for a polypeptide of molecular mass 79 kDa. The overexpression of the beta-glucosidase in A. xylinum caused a tenfold increase in activity compared to the wild-type strain. In addition, the action pattern of the enzyme was identified as G3ase activity. The deduced amino acid sequence of the bglxA gene showed 72.3%, 49.6%, and 45.1% identity with the beta-glucosidases from A. xylinum subsp. sucrofermentans, Cellvibrio gilvus, and Mycobacterium tuberculosis, respectively. Based on amino acid sequence similarities, the beta-glucosidase (BglxA) was assigned to family 3 of the glycosyl hydrolases.     

Microcalorimetric study of cellulose degradation by Cellulomonas uda ATCC 21399

A newly designed batch calorimeter was used to investigate the degradability of some celluloses having varying degrees of crystallinity. The PTC of an aerobic culture of Cellulomonas uda ATCC 21399 obtained revealed a diauxic growth which is attributed to the presence of hemicellulose contaminating Avicel and MN300 cellulose. The microcrystalline celluloses used were not completely utilized, whereas amorphous cellulose was easily metabolized, indicating that under the growth conditions used here, the physical structure of cellulose strongly influenced its microbial degradability. An equivalent growth yield of ca. 0.44 g/g was found with all the substrates used. The heat evolved by metabolism of 1 g cellulose was -5.86 kJ/g, a value similar to that obtained with glucose culture. The growth rate was the only variable parameter. The data obtained showed as expected that the hydrolysis product of cellulose was consumed in the same way as that of glucose and that the only limiting factor to the biodegradability of cellulose was the breakdown of the polymeric substrate. It is concluded that data obtained with glucose metabolism can be used to evaluate the extent of cellulose degradation.     

Influence of different carbon sources on bacterial cellulose production by Gluconacetobacter xylinus strain ATCC 53524

Aims:  To determine the effect of carbon sources on cellulose produced by Gluconacetobacter xylinus strain ATCC 53524, and to characterize the purity and structural features of the cellulose produced.
Methods and Results:  Modified Hestrin Schramm medium containing the carbon sources mannitol, glucose, glycerol, fructose, sucrose or galactose were inoculated with Ga . xylinus strain ATCC 53524. Plate counts indicated that all carbon sources supported growth of the strain. Sucrose and glycerol gave the highest cellulose yields of 3·83 and 3·75 g l⁻¹ respectively after 96 h fermentation, primarily due to a surge in cellulose production in the last 12 h. Mannitol, fructose or glucose resulted in consistent rates of cellulose production and yields of >2·5 g l⁻¹. Solid state ¹³C CP/MAS NMR revealed that irrespective of the carbon source, the cellulose produced by ATCC 53524 was pure and highly crystalline. Scanning electron micrographs illustrated the densely packed network of cellulose fibres within the pellicles and that the different carbon sources did not markedly alter the micro-architecture of the resulting cellulose pellicles.
Conclusions:  The production rate of bacterial cellulose by Ga . xylinus (ATCC 53524) was influenced by different carbon sources, but the product formed was indistinguishable in molecular and microscopic features.
Significance and Impact of the Study:  Our studies for the first time examined the influence of different carbon sources on the rate of cellulose production by Ga . xylinus ATCC 53524, and the molecular and microscopic features of the cellulose produced.     

Molecular basis of cellulose biosynthesis disappearance in submerged culture of Acetobacter xylinum

Acetobacter xylinum strains are known as very efficient producers of bacterial cellulose which, due to its unique properties, has great application potential. One of the most important problems faced during cellulose synthesis by these bacteria is generation of cellulose non-producing cells, which can appear under submerged culture conditions. The reasons of this remain unknown. These studies have been undertaken to compare at the molecular level wild-type, cellulose producing (Cel(+)) A. xylinum strains with Cel(-) forms of cellulose-negative phenotype. Comparison of protein profiles of both forms of A. xylinum by 2D electrophoresis allowed for the isolation of proteins which were produced exclusively by either Cel+ or Cel- cells. Sequences of peptides derived from these proteins were aligned with those of proteins deposited in databases. This analysis revealed that Cel(-) cells lacked two enzymes: phosphoglucomutase and glucose-1-phosphate uridylyltransferase, which generates UDP-glucose being the substrate for cellulose synthase. DNA was analyzed by ligation-mediated PCR carried out at low denaturation temperature (PCR-MP). Two DNA fragments of different thermal stability (218 and 217 bp) were obtained from the DNA of Cel(+) and Cel(-) forms, respectively. The only difference between these Cel(-) and Cel(+) DNA fragments is deletion of one T residue. Alignment of those two sequences with those deposited in the GenBank database revealed that similar fragments are present in the genomes of some bacterial cellulose producers and are located downstream from open reading frames (ORF) encoding phosphoglucomutase. The meaning of this observation is discussed.     

Intermediatry steps in Acetobacter xylinum cellulose synthesis: studies with whole cells and cell-free preparations of the wild type and a celluloseless mutant.

Intermediatry steps in cellulose synthesis in Acetobacter xylinum were studied with resting cells and particulate-membranous preparations of the wild-type strain and of a celluloseless mutant. Exogenously supplied [1-14C]glucose was rapidly converted by resting cells of both types into glucose 6-phosphate, glucose 1-phosphate, and uridine glucose 5'-diphosphate (UDP)-glucose and incorporated into lipid-, water-, and alkali-soluble cellular fractions. The decrease in the level of labeled hexose-phosphates and UDP-glucose upon depletion of the exogenous substrate was accounted for by a continuous incorporation of [14C]glucose into cellulose in the wild type and into the above-mentioned cellular components in the mutant. [14C]glucose retained in the alkali- and water-soluble fractions of pulse-labeled wild-type cells was quantitatively chased into cellulose. Sonic extracts of both strains catalyzed the transfer of glucose from UDP-glucose into lipid-, water-, and alkali-soluble materials, as well as into an alkali-insoluble cellulosic beta-1,4-glucan. The results strongly support the sequence glucose leads to glucose 6-phosphate leads to glucose 1-phosphate leads to UDP-glucose leads to cellulose and indicate that lipid- and protein-linked cellodextrins may function as intermediates between UDP-glucose and cellulose in A. xylinum.     

AcsA–AcsB: The core of the cellulose synthase complex from Gluconacetobacter hansenii ATCC23769

The gram-negative bacterium, Gluconacetobacter hansenii, produces cellulose of exceptionally high crystallinity in comparison to the cellulose of higher plants. This bacterial cellulose is synthesized and extruded into the extracellular medium by the cellulose synthase complex (CSC). The catalytic component of this complex is encoded by the gene AcsAB. However, several other genes are known to encode proteins critical to cellulose synthesis and are likely components of the bacterial CSC. We have purified an active heterodimer AcsA–AcsB from G. hansenii ATCC23769 to homogeneity by two different methods. With the purified protein, we have determined how it is post-translationally processed, forming the active heterodimer AcsA–AcsB. Additionally, we have performed steady-state kinetic studies on the AcsA–AcsB complex. Finally through mutagenesis studies, we have explored the roles of the postulated CSC proteins AcsC, AcsD, and CcpAx.     

Partial bioenergetic characterization of Gluconacetobacter xylinum cells released from cellulose pellicles by a novel methodology

AIMS: Gluconacetobacter xylinum is well known for its ability to produce large amounts of cellulose, however, little is known about its cell physiology. Our goal was to study the respiratory metabolism and components of the respiratory system of this bacterium in static cultures. To reach our goal, a medium formulation had to be designed to improve cell growth and cellulose production together with a novel method for the recovery of cells from cellulose pellicles. METHODS AND RESULTS: Successive modifications of a nutrient medium improved G. xylinum cell growth 4.5-fold under static culture conditions. A blender homogenization procedure for the releasing of cells from the cellulose matrix gave a high yield of cells recovered. Respiratory activities of purified cells were greatly stimulated by exogenous substrates and showed to be resistant to KCN. Unexpectedly, exogenous NADH was oxidized at high rates. Cytochromes a, b, c and d were identified after spectral analyses. CONCLUSIONS: Partial bioenergetic characterization of G. xylinum cells allowed us to propose a scheme for its respiratory system. In addition, the growth medium for biomass production and the procedure for the efficient recovery of cells from cellulose pellicles were significantly improved. SIGNIFICANCE AND IMPACT OF THE STUDY: This work provides the first-ever bioenergetic characterization of G. xylinum grown in static cultures. In addition, a novel methodology to obtain purified cells in suitable quantities for biochemical research is described.     

细菌纤维素的研究进展

细菌纤维素是由醋酸杆菌属、根瘤菌属、土壤杆菌属、八叠球菌属等的某些细菌在一定条件下产生的,其中最有代表性的细菌是木醋杆菌。与传统植物纤维素相比,细菌纤维素具有很高的化学纯度。主要介绍细菌纤维素性质、生物合成的方法及其在食品工业、造纸工业和作为一种生物材料在医学工程等方面的应用。     

木醋杆菌纤维素合成操纵子的克隆及棉花转化

革兰氏阴性菌木醋杆菌 (Acetobacterxylinum (Brown)Yamada)合成一种由纤维素微纤丝组成的胞外带状物。与高等植物纤维素相比 ,它具有独特的结构和机械性能。根据从木醋杆菌ATCC 5 35 82克隆的acs纤维素合成操纵子序列设计引物 ,用PCR的方法从木醋杆菌Ay2 0 1中克隆了ayacs纤维素合成操纵子的全部 4个基因。序列比较发现 ,两者高度同源。将连上CaMV 35S启动子的acsA、acsB克隆到植物表达载体pCAMBIA 130 1上 ,acsC、acsD克隆到pCOB30 2_3中。然后通过花粉管通道法转化棉花 (Gossypiumhirsutum)胚珠 ,收获的种子在含有卡那霉素和除草剂的双抗培养基上进行筛选。PCR检测发现 934粒种子中有 5棵植株含有全部 4个基因。这是首次将编码 4个功能蛋白的细菌操纵子成功地转入棉花     

Cloning of cellulose synthase genes from Acetobacter xylinum JCM 7664: implication of a novel set of cellulose synthase genes.

Three sets of cellulose synthase genes were cloned from a cellulose-producing bacterium Acetobacter xylinum JCM 7664. One set of genes (bcsAI/bcsBI/bcsCI/bcsDI) were highly conserved with the well-established type I genes in other strains of A. xylinum, while the other two (bcsABII-A, bcsABII-B) were homologous to the known type II (acsAII). Unexpectedly, they were immediately followed by a gene cluster of bcsX/bcsY/bcsCII/ORF569, likely forming an operon. Western blotting demonstrated that the BcsY protein accumulated in cells. Since BcsY showed striking similarities to a number of membrane-bound transacylases, it was hypothesized that the type II cellulose synthase produces acylated cellulose, which might be anchored on the cytoplasmic membrane. An insertion sequence of IS1380-type was found just upstream of the one type II gene (bcsABII-B), suggestive of nonfunctioning.     

Alteration of in vivo cellulose ribbon assembly by carboxymethylcellulose and other cellulose derivatives

In vivo cellulose ribbon assembly by the Gram-negative bacterium Acetobacter xylinum can be altered by incubation in carboxymethylcellulose (CMC), a negatively charged water-soluble cellulose derivative, and also by incubation in a variety of neutral, water-soluble cellulose derivatives. In the presence of all of these substituted celluloses, normal fasciation of microfibril bundles to form the typical twisting ribbon is prevented. Alteration of ribbon assembly is most extensive in the presence of CMC, which often induces synthesis of separate, intertwining bundles of microfibrils. Freeze- etch preparations of the bacterial outer membrane suggest that particles that are thought to be associated with cellulose synthesis or extrusion may be specifically organized to mediate synthesis of microfibril bundles. These data support the previous hypothesis that the cellulose ribbon of A. xylinum is formed by a hierarchical, cell- directed, self-assembly process. The relationship of these results to the regulation of cellulose microfibril size and wall extensibility in plant cell walls is discussed.     

Viability and cellulose synthesizing ability of Gluconacetobacter xylinus cells under high-hydrostatic pressure

The effect of pressure on viability and the synthesis of bacterial cellulose (BC) by Gluconacetobacter xylinus ATCC53582 were investigated. G. xylinus was statically cultivated in a pressurized vessel under 0.1, 30, 60, and 100 MPa at 25°C for 6 days. G. xylinus cells remained viable and retained cellulose producing ability under all the conditions tested, though the production of cellulose decreased with increasing the pressure. The BCs produced at each pressure condition were analyzed by field emission scanning electron microscopy (FE-SEM) and Fourier Transform Infrared (FT-IR). FE-SEM revealed that the widths of BC fibers produced under high pressure decreased as compared with those produced under the atmospheric pressure. By FT-IR, all the BCs were found to be of Cellulose type I, as the same as typical native cellulose. Our findings evidently showed that G. xylinus possessed a piezotolerant (barotolerant) feature adapting to 100 MPa without losing its BC producing ability. This was the first attempt in synthesizing BC with G. xylinus under elevated pressure of 100 MPa, which corresponded to the deep sea at 10,000 m.     

Role of water-soluble polysaccharides in bacterial cellulose production

Acetobacter xylinum BPR2001 produces water-insoluble bacterial cellulose (BC) and a water-soluble polysaccharide called acetan in corn steep liquor-fructose medium. Acetobacter xylinum EP1, which is incapable of acetan production was derived by disrupting the aceA gene of BPR2001. The BC production by EP1 (2.88 g/L) was lower than that by BPR2001 (4.6 g/L) in baffled-flask culture. When purified acetan or agar was added to the medium from the start of cultivation, the BC production by EP1 was enhanced and the final BC yield of EP1 was almost the same as that of BPR2001. A similar improvement of BC production by EP1 by the addition of agar was also confirmed by cultivation in a 50-L airlift reactor. From these results, the role of acetan in BC production is associated with the increase in the viscosity of the culture medium which may hinder coagulation of BC and cells in the culture, thereby accelerating the growth of BPR2001 and BC production by BPR2001.     

表达淀粉酶、糖化酶葡糖酸醋杆菌工程菌的构建

采用基因融合技术,将葡糖酸醋杆菌Gluconacetobacter hansenii ATCC23769分泌蛋白CMCax的信号肽序列分别与来源于枯草芽胞杆菌的淀粉酶基因、黑曲霉的糖化酶基因融合构建融合蛋白,连入能在G.hansenii ATCC23769自主复制的载体pbs-H1S中,电击转入G.hansenii ATCC23769,构建能内源表达淀粉酶、糖化酶,以及淀粉酶-糖化酶的葡糖酸醋杆菌。淀粉平板透明圈检测结果和DNS测酶活结果显示,构建的3种工程菌能成功表达并分泌淀粉酶和糖化酶。     

Characterization of genes in the cellulose-synthesizing operon (acs operon) of Acetobacter xylinum: implications for cellulose crystallization.

The synthesis of an extracellular ribbon of cellulose in the bacterium Acetobacter xylinum takes place from linearly arranged, membrane-localized, cellulose-synthesizing and extrusion complexes that direct the coupled steps of polymerization and crystallization. To identify the different components involved in this process, we isolated an Acetobacter cellulose-synthesizing (acs) operon from this bacterium. Analysis of DNA sequence shows the presence of three genes in the acs operon, in which the first gene (acsAB) codes for a polypeptide with a molecular mass of 168 kDa, which was identified as the cellulose synthase. A single base change in the previously reported DNA sequence of this gene, resulting in a frameshift and synthesis of a larger protein, is described in the present paper, along with the sequences of the other two genes (acsC and acsD). The requirement of the acs operon genes for cellulose production was determined using site-determined TnphoA/Kanr GenBlock insertion mutants. Mutant analysis showed that while the acsAB and acsC genes were essential for cellulose production in vivo, the acsD mutant produced reduced amounts of two cellulose allomorphs (cellulose I and cellulose II), suggesting that the acsD gene is involved in cellulose crystallization. The role of the acs operon genes in determining the linear array of intramembranous particles, which are believed to be sites of cellulose synthesis, was investigated for the different mutants; however, this arrangement was observed only in cells that actively produced cellulose microfibrils, suggesting that it may be influenced by the crystallization of the nascent glucan chains.     

Genes required for cellulose synthesis in Agrobacterium tumefaciens.

A region of the chromosome of Agrobacterium tumefaciens 11 kb long containing two operons required for cellulose synthesis and a part of a gene homologous to the fixR gene of Bradyrhizobium japonicum has been sequenced. One of the cellulose synthesis operons contained a gene (celA) homologous to the cellulose synthase (bscA) gene of Acetobacter xylinum. The same operon also contained a gene (celC) homologous to endoglucanase genes from A. xylinum, Cellulomonas uda, and Erwinia chrysanthemi. The middle gene of this operon (celB) and both the genes of the other operon required for cellulose synthesis (celDE) showed no significant homology to genes contained in the databases. Transposon insertions showed that at least the last gene of each of these operons (celC and celE) was required for cellulose synthesis in A. tumefaciens.