Efficient oligonucleotide-directed construction of mutations in expression vectors by the gapped duplex DNA method using alternating selectable markers.

An efficient method for the construction of multiple mutations in a sequential manner is described. It is based on the gapped duplex DNA approach to oligonucleotide-directed mutagenesis (Kramer et al. 1984, Nucl. Acids Res. 12, 9441-9456) and a set of newly constructed phasmid vectors. These are characterized by the following features. Presence of the phage fl replication origin permits ready conversion to the single stranded DNA form. An amber mutation within, alternatively, the bla or cat gene provides a means for ready selection of the strand into which the mutagenic oligonucleotide has been incorporated. By means of the alternating antibiotic resistance markers any number of mutations can be constructed in consecutive rounds of mutagenesis. The optional presence of gene expression signals allows the direct overproduction of structurally altered proteins without re-cloning. Both the mutagenesis and expression aspects were tested using the lacZ gene as a model.     

Variants of phage M13 DNA containing a fragment of the beta-galactosidase gene--a convenient mutation system for the study of oligonucleotide-directed mutagenesis

A model system is developed to test oligonucleotide-directed mutations: T----C transition, T and C deletions (delta T and delta C), C insertion, double mutations (A----G, delta T), (T----C, A----G), and large oligonucleotide deletions (36 or 44 nucleotides). The system includes 9 variants of the phage M13 DNA carrying fragment of beta-galactosidase gene, and oligodeoxyribonucleotides partially noncomplementary to DNA sequence of this gene. Six variants are obtained by the site-localized mutagenesis, the other were described earlier. Induced mutations are easily tested by phenotype change of transformed bacteria (Lac+----Lac-); by formation or loss of the sites for BamHI and EcoRI restrictases; by DNA hybridization with 32P-labeled oligonucleotides; and by DNA sequencing by the Sanger method. The system is used to study the role of some factors, such as completeness of RF DNA synthesis, thermal stability of the oligonucleotide: DNA complex, quality of enzymes and substrates used in polymerase reaction, mutation type or the efficiency of mutagenesis. A number of unexpected mutations were observed in the course of oligonucleotide-directed mutagenesis. Lower yields of some mutants induced by oligonucleotides are shown to be due to the action of repair systems of bacteria.     

Deletion mutagenesis in M13 by polymerase chain reaction using universal sequencing primers

A simple procedure is described for the efficient deletion of large DNA sequences. The method involves a combination of oligonucleotide-directed mutagenesis in bacteriophage M13 and amplification of the mutagenized product by polymerase chain reaction. In contrast to other protocols employing polymerase chain reaction, synthesis of only one specific primer is required. The efficiency of heteroduplex formation between mutagenic primers directing large deletions and single-stranded template is discussed.     

General mutagenesis/gene expression procedure for the construction of variant immunoglobulin domains in Escherichia coli. Production of the Bence-Jones protein REIv via fusion to beta-lactamase.

A novel mutagenesis/gene expression and protein purification scheme was established for ready construction and purification of variant immunoglobulin domains in Escherichia coli. This procedure, which has been applied to the production of the VK domain of the Bence-Jones protein REI and structural variants of it, rests on the synthesis of chimeric proteins with beta-lactamase as the amino-terminal fusion partner. The beta-lactamase not only guides the fusion protein to the periplasmic space, but also allows affinity chromatography on phenylboronate-Sepharose as an efficient and general purification procedure, independent of hypervariable loop structure. The REIv protein was released from the purified fusion protein by site-specific proteolytic cleavage. After a second passage through the same affinity column, up to 2 mg of pure REIv was obtained starting from one liter of bacterial liquid culture. A scheme of oligonucleotide-directed mutagenesis was introduced for replacement of DNA stretches encoding hypervariable loops. It exploits a colony color genetic screen and can be applied to any DNA sequence replacement. Mutations can be constructed by simple co-transformation with single-stranded template DNA and mutagenic oligonucleotide.     

Cassette mutagenesis: an efficient method for generation of multiple mutations at defined sites

A method is described for the efficient insertion of mutagenic oligodeoxynucleotide cassettes which allow saturation of a target amino acid codon with multiple mutations. Restriction sites are introduced by oligonucleotide-directed mutagenesis procedures to flank closely the target codon in the plasmid containing the gene. The restriction sites to be introduced are chosen based on their uniqueness to the plasmid, proximity to the target codon and conservation of the final amino acid coding sequence. The flanking restriction sites in the plasmid are digested with the cognate restriction enzymes, and short synthetic duplex DNA cassettes (10-25 bp) are inserted. The mutagenic cassette is designed to restore fully the wild-type coding sequence, except over the target codon, and to eliminate one or both restriction sites. Elimination of a restriction site facilitates selection of clones containing the mutagenic oligodeoxynucleotide cassette. To make the cassettes, single-stranded oligodeoxynucleotides and their complements are synthesized in separate pools containing different codons over the target. This method has been successfully applied to generate 19 amino acid substitutions at position 222 in the subtilisin protein sequence.     

Site-directed mutagenesis by complementary-strand synthesis using a closing oligonucleotide and double-stranded DNA templates

An approach for generating structures capable of directing full-length complementary-strand synthesis for double-stranded plasmid DNA is described. The structures are formed following heat denaturation and cooling of linearized plasmid DNA molecules in the presence of what is referred to as a "closing" oligonucleotide. Consisting of a sequence complementary to the free ends of one of the two plasmid strands, the closing oligonucleotide functions as an agent for recircularization of a DNA strand and generation of a primer-circular template structure suitable for polymerase-dependent full-length complementary-strand synthesis and ligation into a covalently closed heteroduplex molecule. When combined with a mutagenic oligonucleotide and uracil-substituted DNA templates, this approach allows site-directed mutagenesis to be performed directly on double-stranded DNA with a mutant formation efficiency of about 50%, a level amenable to rapid screening by DNA sequencing.     

Directed reconstruction of the influenza virus hemagglutinin gene

A new approach to create chimeric genes by directed exchange of oligonucleotide fragments was developed. By oligonucleotide-directed mutagenesis a few deletion mutants of the influenza virus hemagglutinin (HA) gene were obtained. These variants of HA gene contain unique restriction sites in DNA regions coding for the A and B epitopes of the HA molecule. The obtained special vectors may be used for cloning DNA fragments coding for new amino acid sequences in internal sites of the HA gene.     

A modified two primer approach to oligonucleotide-directed in vitro mutagenesis

Using oligonucleotide-directed mutagenesis, we are trying to define the features of the protein structure that are important for the DNA and c-AMP binding by CAP from E. coli, the enzymic activity and putative DNA binding of dihydrofolate reductase of L. casei, and the functionally important regions of the self-splicing RNA of the r-RNA intron of Tetrahymena thermophila. We have used a modification of the method described by Norris et al. [1]. A mutagenic primer and an M13 universal sequencing primer are annealed simultaneously to a template from an M13 clone containing the DNA to be mutagenised and, after DNA strand extension, the fragment is cut out and recloned into either M13 or plasmid vectors. We have analysed the effect on the frequency of mutation of: the temperature used for strand extension; the class of base change attempted; the host mismatch repair system. A recently developed system for phenotypic detection of mutations in the Tetrahymena intron aided in determining mutation frequencies.     

Triple-helix formation is compatible with an adjacent DNA-protein complex.

The effect of oligonucleotide-directed triple-helix formation on the binding of a protein to an immediately adjacent sequence has been examined. A double-stranded oligonucleotide was designed with a target site for the binding of a pyrimidine oligonucleotide located immediately adjacent to the recognition sequence for the herpes simplex virus type 1 (HSV-1) origin of replication binding protein, which is encoded by the UL9 gene of HSV-1. Since the optimal conditions for the binding of the UL9 protein and the pyrimidine oligonucleotide to the duplex DNA are markedly different, a pyrimidine oligonucleotide was designed to optimize binding affinity and specificity for the target duplex oligonucleotide. Consideration was given to length and sequence composition in an effort to maximize triple-strand formation under conditions amenable to the formation of the UL9-DNA complex. Using gel mobility shift assays, a trimolecular complex composed of duplex DNA bound to both a third oligonucleotide strand and the UL9 protein was detected, indicating that the UL9-DNA complex is compatible with the presence of a triple helix in the immediately adjacent sequences.     

Mutagenesis, directed by artificial oligonucleotide analogs. I. Participation of ribonucleotide fragments in DNA replication and repair

The mutation system has been developed to study the mutagenic properties of modified oligonucleotide analogs. The mutagenic properties of oligonucleotides containing one ribonucleotide have been examined. The presence of a ribonucleotide is shown not to induce any mutations. But when the oligonucleotide induces two marker deletions detached by 6 nucleotides they may be repaired separately, in this case the deletion bordering with the ribonucleotide is predominantly repaired.     

Use of yeast transformation by oligonucleotides to study DNA lesion bypass in vivo

We have studied mutagenic specificities of DNA lesions in vivo in yeast CYC1 oligonucleotide transformation assay. We introduced two lesions into oligonucleotides. One was a nucleoside analog, 3,4-dihydro-6H,8H-pyrimido[4,5-c][1,2]oxazin-7-one 2'-deoxyriboside (dP), which is highly mutagenic to bacteria. It is supposed to be a miscoding, but otherwise good template for DNA polymerases. The other lesion was the TT pyrimidine(6-4)pyrimidone photoproduct, one of the typical UV lesions, which blocks DNA replication. These oligonucleotides were used to transform yeast cyc1 mutants with ochre nonsense mutation to Cyc1+. As expected from its templating properties in vitro, the transforming activity of dP-containing oligonucleotides was similar to those of unmodified oligonucleotides. Results indicated that dP may direct incorporation of guanine and adenine at a ratio of 1:20 or more in vivo. An oligonucleotide containing the photoproduct showed the transforming activity of as low as 3-5% of that of the corresponding unmodified oligonucleotide. This bypass absolutely required REV1 gene. The sequence analysis of the transformants has shown that the lesion was read as TT and TC at a ratio of 3:7, indicating its high mutagenic potential.     

The gapped duplex DNA approach to oligonucleotide-directed mutation construction.

A simple and efficient method is described to introduce structurally pre-determined mutations into recombinant genomes of filamentous phage M13. The method rests on gapped duplex DNA (gdDNA) molecules of the phage M13 genome as the key intermediate. In this gdDNA, the (+) and the (shorter) (-) strand carry different genetic markers in such a way, that a rigorous selection can be applied for phage carrying the markers of the (-) strand. For introduction of the mutation, a synthetic oligonucleotide with partial homology to a target site within the single stranded DNA region is annealed to the gdDNA. The oligonucleotide subsequently becomes part of the (-) strand by enzymatic DNA gap filling and sealing. This physical linkage is preserved at the genetic level after transfection of a recipient E.coli strain deficient in DNA mismatch correction, so that the synthetic marker can be selected from the phage progeny independent from its potential phenotype. It is demonstrated that by this method mutants can be constructed with marker yields in excess of 70%.     

Oligonucleotide-directed mutagenesis using M13-derived vectors: an efficient and general procedure for the production of point mutations in any fragment of DNA.

This paper presents a versatile and efficient procedure for the construction of oligodeoxyribonucleotide directed site-specific mutations in DNA fragments cloned into M13 derived vectors. As an example, production of a transition mutation in a clone of the yeast MATa1 gene is described. The oligonucleotide is hybridized to the template DNA and covalently closed closed double stranded molecules are generated by extension of the oligonucleotide primer with E. coli DNA polymerase (large fragment) and ligation with T4 DNA ligase. The resulting double stranded closed circular DNA (CC-DNA) is separated from unligated and incompletely extended molecules by alkaline sucrose gradient centrifugation. This purification is essential for production of mutants at high efficiency. Competent E. coli JM101 cells are transformed with the CC-DNA fraction and single stranded DNA is isolated from individual plaques. The recombinants are screened for mutant molecules by 1) restriction endonuclease screening for the loss of the Hinf I site in the target region, and 2) by dot blot hybridization using the mutagenic oligonucleotide as probe. Double stranded DNA is isolated from the sequencing. Efficiency of mutant production is in the range of 10-45% and no precautions to prevent mismatch repair are required.     

DIROM: an experimental design interactive system for directed mutagenesis and nucleic acids engineering

A computer system DIROM for oligonucleotide-directed mutagenesisand artificial gene design has been designed for better experimentalplanning and control. DIROM permits searching for optimal oligonucleotideswith respect to certain important parameters, namely sufficientenergy of oligonucleotide-target hybridization, the secondarystructure of oligonuc-tide and target DNA, the presence of alternatebinding sites in the target DNA and terminal G/C pairs. It canalso be used to plan polymerase chain reaction experiments,for optimal primer selection, in sequencing, etc. DIROM enablesone to search for both existing and potential restriction sites,to perform vector + target sequence construction. The systemconsists of a set of original algorithms that formalize theempirical knowledge of oligonucleotide action as primers.     

Simultaneous synthesis of degenerate oligonucleotides of variable length.

Most mutagenic studies have emphasized the exchange of residues but disregarded the variation in length as the other aspect of protein variability. In this report a novel strategy to simultaneously synthesize degenerate mutagenic oligonucleotides of variable length is reported. Synthesis is done on a normal automated DNA synthesizer with modifications only in the program. Product of such synthesis can be used as a mutagenic oligonucleotide for construction of mutant proteins with variable length of inserts.     

Double displacement loops (double d-loops) are templates for oligonucleotide-directed mutagenesis and gene repair

Appreciable levels of gene repair result from the hybridization of two oligonucleotides at a specific site in a mutated gene and subsequent correction by a form of oligonucleotide-directed mutagenesis known as gene repair. The incorporation of the two oligonucleotides into superhelical plasmid DNA leads to the formation of double d-loops, structures shown to be templates for the repair of both frameshift and point mutations. Structural limitations placed on the template indicate that correction is influenced significantly by the positioning of the second oligonucleotide, known as the annealing oligonucleotide. Complexes constructed with two oligonucleotides directly opposite each other exhibit the highest levels of gene repair activity. Blocking the 3'-end of either oligonucleotide with an amino C7 group does not diminish the performance of the double d-loop as a template for correction of the point mutation, suggesting that primer extension does not play a pivotal role in the mechanism of gene repair.     

Oligonucleotide site-directed mutagenesis in Xenopus egg extracts.

Addition of M13mp18 single-stranded DNA annealed with an oligonucleotide to a Xenopus egg extract results in a rapid and efficient incorporation of the oligonucleotide in a complete double-stranded supercoiled molecule. Both the efficiency of DNA synthesis and the recovery of complete double-stranded molecules are increased relative to the reaction carried out by the classical technique using the E. coli Klenow DNA polymerase, DNA ligase, dNTPs, ATP and ions. Site specific mutagenesis was assayed by reverting a point mutation in the lacz region of M13mp18. The color assay described by Messing and sequencing of the DNA extracted from isolated plaques was used to check for the reversion. A 2 hr incubation of the heteroduplex carrying the mutagenic oligonucleotide in the Klenow-ligase-dNTP mixture allows a recovery of 6% mutant phage after transformation of competent cells with the reaction products. Using the Xenopus egg extract, 83% mutant phage were recovered after the same incubation time, in reactions entirely performed in parallel. The Xenopus extract is stable and contains all components required for the assay, including all ionic and protein factors; thus the only addition is the annealed DNA. Such an eukaryotic system is therefore an attractive alternative to the reconstituted prokaryotic DNA polymerase-DNA ligase system for site specific mutagenesis.     

LMPCR for detection of oligonucleotide-directed triple helix formation: a cautionary note.

We note that precautions are necessary when ligation-mediated PCR (LMPCR) is applied to the detection of oligonucleotide-directed triple helix formation in vitro and in vivo. Synthetic oligonucleotides applied to cell cultures can persist after chemical treatment and genomic DNA isolation and inhibit a key step in LMPCR, causing an artifact that simulates a triplex footprint. Residual oligonucleotides apparently form triplexes during LMPCR, blocking ligation of the unidirectional linker in a site-specific manner. We show that careful removal of residual oligonucleotide prior to LMPCR alleviates this problem.     

Predicting oligonucleotide-directed mutagenesis failures in protein engineering

Protein engineering uses oligonucleotide-directed mutagenesis to modify DNA sequences through a two-step process of hybridization and enzymatic synthesis. Inefficient reactions confound attempts to introduce mutations, especially for the construction of vast combinatorial protein libraries. This paper applied computational approaches to the problem of inefficient mutagenesis. Several results implicated oligonucleotide annealing to non-target sites, termed ‘cross-hybridization’, as a significant contributor to mutagenesis reaction failures. Test oligonucleotides demonstrated control over reaction outcomes. A novel cross-hybridization score, quickly computable for any plasmid and oligonucleotide mixture, directly correlated with yields of deleterious mutagenesis side products. Cross-hybridization was confirmed conclusively by partial incorporation of an oligonucleotide at a predicted cross-hybridization site, and by modification of putative template secondary structure to control cross-hybridization. Even in low concentrations, cross-hybridizing species in mixtures poisoned reactions. These results provide a basis for improved mutagenesis efficiencies and increased diversities of cognate protein libraries.     

A marker-coupled method for site-directed mutagenesis

A marker-coupled method for site-directed mutagenesis (SDM) has been developed. In this method, target DNA is first cloned into a plasmid vector which carries an inactivated tetracycline-resistance (TcR)-encoding tet gene. Using this cloned plasmid as template, polymerase chain reaction (PCR) is performed with a mutagenic primer and a marker primer. The mutagenic primer contains the desired mutations to be introduced into the target DNA, and the marker primer contains a mutation for restoring the activity of the inactivated tet gene. The PCR product is annealed with a gapped duplex plasmid template, extended and ligated in vitro. The resulting uni-strand-mutated plasmid is converted into the gapped duplex form, transformed into Escherichia coli JM109 and spread on yeast extract/tryptone culture medium + Tc plates. The TcR colonies grown on these plates all carry active tet genes. Due to the 'tight coupling' between the marker primer and the mutagenic primer formed in the PCR product, these TcR colonies should also carry the mutagenic primer, e.g., the desired mutations in the target DNA. In fact, practically all of the TcR colonies have been found to be the desired mutants in the present experiments. Therefore, this method provides a very efficient approach for SDM.