Imidazole chloride and tris-chloride substitute for sodium chloride in inducing high-affinity AdoPP[NH]P binding to (Na+ + K+)-ATPase

Optimal binding of [2,8-3H]AdoPP[NH]P to (Na+ + K+)-ATPase requires 25 mM Na+ (Cl-), 50 mM imidazole+ (Cl-) or 50 mM Tris+ (Cl-). Chloride is essential as counterion. We conclude that imidazole+ and Tris+ are able to bind to the Na+ site, and recommend the use of dilute buffers for studying the partial reactions of (Na+ + K+)-ATPase. In NaCl or the substituting buffers the dissociation constant for the enzyme-AdoPP[NH]P complex at 0 degrees C and pH 7.25 is 0.4 microM, whereas in millimolar MgCl2 it is about 2 microM. These distinct levels in affinity with MgCl2 as compared to NaCl, together with the MgCl2-dependence of photolabelling of the enzyme with ATP analogues (Rempeters, G. and Schoner, W. (1981) Eur. J. Biochem. 121, 131-137), suggest significant changes within the substrate site of (Na+ + K+)-ATPase upon binding of Mg2+ (Cl-)2.     

Thallium binding to native and radiation-inactivated Na+/K+-ATPase

The number of high-affinity K+-binding sites on purified Na+/K+-ATPase from pig kidney outer medulla has been assessed by measurement of equilibrium binding of thallous thallium, Tl+, under conditions (low ionic strength, absence of Na+ and Tris+) where the enzyme is in the E2-form. Na+/K+-ATPase has two identical Tl+ sites per ADP site, and the dissociation constant varies between 2 and 9 microM. These values are identical to those for Tl+ occlusion found previously by us, indicating that all high-affinity binding leads to occlusion. The specific binding was obtained after subtraction of a separately characterized unspecific adsorption of Tl+ to the enzyme preparations. Radiation inactivation leads to formation of modified peptides having two Tl+-binding sites with positive cooperativity, the second site-dissociation constant approximating that for the native sites. The radiation inactivation size (RIS) for total, specific Tl+ binding is 71 kDa, and the RIS for Tl+ binding with original affinity is approx. 190 kDa, equal to that of Na+/K+-ATPase activity and to that for Tl+ occlusion with native affinity. This latter RIS value confirms our recent theory that in situ the two catalytic peptides of Na+/K+-ATPase are closely associated. The 71 kDa value obtained for total Tl+ sites is equal to that for total binding of ATP and ADP and it is clearly smaller than the molecular mass of one catalytic subunit (112 kDa). The Tl+-binding experiments reported thus supports the notion that radiation inactivation of Na+/K+-ATPase is a stepwise rather than an all or none process.     

Ligand binding sites in Escherichia coli inorganic pyrophosphatase: effects of active site mutations

Type I soluble inorganic pyrophosphatases (PPases) are well characterized both structurally and mechanistically. Earlier we measured the effects of active site substitutions on pH--rate profiles for the type I PPases from both Escherichia coli (E-PPase) and Saccharomyces cerevisae (Y-PPase). Here we extend these studies by measuring the effects of such substitutions on the more discrete steps of ligand binding to E-PPase, including (a) Mg(2+) and Mn(2+) binding in the absence of added ligand; (b) Mg(2+) binding in the presence of either P(i) or hydroxymethylbisphosphonate (HMBP), a competitive inhibitor of E-PPase; and (c) P(i) binding in the presence of Mn(2+). The active site of a type I PPase has well-defined subsites for the binding of four divalent metal ions (M1--M4) and two phosphates (P1, P2). Our results, considered in light of pertinent results from crystallographic studies on both E-PPase and Y-PPase and parallel functional studies on Y-PPase, allow us to conclude the following: (a) residues E20, D65, D70, and K142 play key roles in the functional organization of the active site; (b) the major structural differences between the product and substrate complexes of E-PPase are concentrated in the lower half of the active site; (c) the M1 subsite is functionally isolated from the rest of the active site; and (d) the M4 subsite is an especially unconstrained part of the active site.     

Functional characterization of lanthanide binding sites in the sarcoplasmic reticulum Ca(2+)-ATPase: do lanthanide ions bind to the calcium transport site?

Gd3+ binding sites on the purified Ca(2+)-ATPase of sarcoplasmic reticulum were characterized at 2 and 6 degrees C and pH 7.0 under conditions in which 45Ca2+ and 54Mn2+ specifically labeled the calcium transport site and the catalytic site of the enzyme, respectively. We detected several classes of Gd3+ binding sites that affected enzyme function: (a) Gd3+ exchanged with 54Mn2+ of the 54MnATP complex bound at the catalytic site. This permitted slow phosphorylation of the enzyme when two Ca2+ ions were bound at the transport site. The Gd3+ ion bound at the catalytic site inhibited decomposition of the ADP-sensitive phosphoenzyme. (b) High-affinity binding of Gd3+ to site(s) distinct from both the transport site and the catalytic site inhibited the decomposition of the ADP-sensitive phosphoenzyme. (c) Gd3+ enhanced 4-nitro-2,1,3-benzoxadiazole (NBD) fluorescence in NBD-modified enzyme by probably binding to the Mg2+ site that is distinct from both the transport site and the catalytic site. (d) Gd3+ inhibited high-affinity binding of 45Ca2+ to the transport site not by directly competing with Ca2+ for the transport site but by occupying site(s) other than the transport site. This conclusion was based mainly on the result of kinetic analysis of displacement of the enzyme-bound 45Ca2+ ions by Gd3+ and vice versa, and the inability of Gd3+ to phosphorylate the enzyme under conditions in which GdATP served as a substrate. These results strongly suggest that Ln3+ ions cannot be used as probes to structurally and functionally characterize the calcium transport site on the Ca(2+)-ATPase.     

The mechanism of rat liver fructose-1,6-bisphosphate inhibition by fructose-2,6-bisphosphate

It was found that a decrease in the activating cation (Mg2+) concentration below [A]0.5 causes the disappearance of cooperativity of the fructose 1.6-bisphosphatase substrate binding sites induced by high fructose 2.6-bisphosphate concentrations without any significant alteration in the extent of the enzyme inhibition. Under these conditions, a competitive type of inhibition (with respect to the substrate) is transformed into a non-competitive type with an increase in the fructose 2.6-bisphosphate concentration. The data obtained confirm the viewpoint that fructose 2.6-bisphosphate binds to the enzyme at two distinct sites, a catalytic and an allosteric ones, differing in their affinity for the inhibitor. It is supposed that the interaction between the allosteric fructose 2.6-bisphosphate binding site and the activator site occupied by Mg2+ is necessary for the cooperative response of the enzyme to the substrate.     

Introduction of a C-terminal aromatic sequence from snake venom phospholipases A2 into the porcine pancreatic isozyme dramatically changes the interfacial kinetics.

Porcine pancreatic phospholipase A2 (PLA2) was modified by single and multiple site-directed mutations at sites thought to be involved in interfacial binding. Charged and polar residues in the C-terminal region were replaced by aromatic residues on the basis of an analogy with snake venom PLA2s, which display high affinity for a zwitterionic interface. The PLA2 variants constructed were N117W, N117W/D119Y and K116Y/N117W/D119Y. Titration with micelles of a zwitterionic substrate suggests that the variants N117W and K116Y/N117W/D119Y possess improved ability to bind to the micellar substrate interface, relative to the wild-type enzyme. Improved interfacial binding was confirmed by direct binding studies with micelles of a zwitterionic substrate analogue, indicating up to five times higher affinity for both variants. Interfacial binding is not improved for the variant N117W/D119Y. Maximal enzyme velocities (Vapp./max) with the zwitterionic substrate were between 25 and 75% of that of the wild-type enzyme. However, competitive inhibition and direct binding studies with a strong inhibitor revealed that the affinity for substrate present at the interface (Km*) is perturbed by the mutations made. For the variant N117W, the slight decrease observed in Vapp./max is most likely made up of a 24-fold reduction in catalytic turnover (kcat) and 18-fold improved substrate binding (Km*).     

Interactions of calcineurin A, calcineurin B, and Ca2+.

Calcineurin B (CN-B) is the Ca(2+)-binding, regulatory subunit of the phosphatase calcineurin. Point mutations to Ca(2+)-binding sites in CN-B were generated to disable individual Ca(2+)-binding sites and evaluate contributions from each site to calcineurin heterodimer formation. Ca(2+)-binding properties of four CN-B mutants and wild-type CN-B were analyzed by flow dialysis confirming that each CN-B mutant binds three Ca2+ and that wild-type CN-B binds four Ca2+. Macroscopic dissociation constants indicate that N-terminal Ca(2+)-binding sites have lower affinity for Ca2+ than the C-terminal sites. Each CN-B mutant was coexpressed with the catalytic subunit of calcineurin, CN-A, to produce heterodimers with specific disruption of one Ca(2+)-binding site. Enzymes containing CN-B with a mutation in Ca(2+)-binding sites 1 or 2 have a lower ratio of CN-B to CN-A and a lower phosphatase activity than those containing wild-type CN-B or mutants in sites 3 or 4. Effects of heterodimer formation on Ca2+ binding were assessed by monitoring (45)Ca2+ exchange by flow dialysis. Enzymes containing wild-type CN-B and mutants in sites 1 and 2 exchange (45)Ca2+ slowly from two sites whereas mutants in sites 3 and 4 exchange (45)Ca2+ slowly from a single site. These data indicate that the Ca2+ bound to sites 1 and 2 is likely to vary with Ca2+ concentration and may act in dynamic modulation of enzyme function, whereas Ca(2+)-binding sites 3 and 4 are saturated at all times and that Ca2+ bound to these sites is structural.     

A spectral probe near the subunit catalytic site of glutamine synthetase from Escherichia coli. Reduced pyridoxal 5'-phosphate.enzyme complexes.

In order to label phosphate binding sites, unadenylylated glutamine synthetase from Escherichia coli has been pyridoxylated by reacting the enzyme with pyridoxal 5'-phosphate followed by reduction of the Schiff base with NaBH4. A complete loss in Mg2+-supported activity is associated with the incorporation of 3 eq of pyridoxal-P/subunit of the dodecamer. At this extent of modification, however, the pyridoxylated enzyme exhibits substantial Mn2+-supported activity (with increased Km values for ATP and ADP). The sites of pyridoxylation appear to have equal affinities for pyridoxal-P and to be at the enzyme surface, freely accessible to solvent. At least one of the three covalently bound pyridoxamine 5'-phosphate groups is near the subunit catalytic site and acts as a spectral probe for the interactions of the manganese.enzyme with substrates. A spectral perturbation of covalently attached pyridoxamine-P groups is caused also by specific divalent cations (Mn2+, Mg2+ or Ca2+) binding at the subunit catalytic site (but not while binding to the subunit high affinity, activating Me2+ site). In addition, the feedback inhibitors, AMP, CTP, L-tryptophan, L-alanine, and carbamyl phosphate, perturb protein-bound pyridoxamine-P groups. The spectral perturbations produced by substrate and inhibitor binding are pH-dependent and different in magnitude and maximum wavelength. Adenylylation sites are not major sites of pyridoxylation.     

Phosphorylation of the isolated high-affinity (Ca2+ + Mg2+) ATPase of the human erythrocyte membrane

Solubilized and purified high-affinity (Ca2+ + Mg2+)-ATPase (ATP phosphohydrolase, EC 3.6.1.3) of the human erythrocyte membrane (Wolf, H.U., Dieckvoss, G. and Lichtner, R. (1977) Acta Biol. Ger. 36, 847) has been phosphorylated and dephosphorylated under various conditions with respect to Ca2+ and Mg2+ concentrations. In the range, 0.001--100 mM, the rate of phosphorylation was dependent on Ca2+ concentration, showing a maximum at 10 mM. The phosphorylation rate was nearly independent of the Mg2+ concentration within the range 0.01-1 mM. This enzyme has at least three Ca2+ binding sites with different affinities and regulatory functions: (1) binding to the high-affinity site yields phosphorylation of the enzyme; (2) binding to a low-affinity site (Ca2+ concentrations higher than 40 microM) inhibits dephosphorylation or the conformational change which is necessary for dephosphorylation; (3) by binding to an additional low-affinity site, Ca2+ at concentrations higher than 1 mM abolishes negative cooperative behaviour (shown below 1 mM Ca2+) and causes weak positive cooperativity between at least two catalytic subunits in the phosphorylation reaction. The phosphoprotein obtained at Ca2+ concentrations above 1 mM dephosphorylates spontaneously after removal of the divalent metal ions. Addition of Mg2+ accelerates the dephosphorylation rate. Affinities of the inhibitory Ca2+ binding sites are reduced by the binding of substrate or K+.     

The sites for catalysis and activation of ribulosebisphosphate carboxylase share a common domain

The complexation of ribulosebiphosphate carboxylase with CO2, Mg2+, and carboxyarabinitol bisphosphate (CABP) to produce the quaternary enzyme-carbamate-Mg2+-CABP complex closely mimics the formation of the catalytically competent enzyme-carbamate-Mg2+-3-keto-CABP form during enzymatic catalysis. Quaternary complexes were prepared with various metals (Mg2+, Cd2+, Mn2+, Co2+, and Ni2+) and with specifically 13C-enriched ligands. 31P and 13C NMR studies of these complexes demonstrate that the activator CO2 site (carbamate site), the metal binding site, and the substrate binding site are contiguous. It follows that both the carboxylase and oxygenase activities of this bifunctional enzyme are influenced by the structures of the catalytic and activation sites.     

Adenine nucleotide binding at a noncatalytic site of mitochondrial F1-ATPase accelerates a Mg(2+)- and ADP-dependent inactivation during ATP hydrolysis.

The evidence is presented that the ADP- and Mg(2+)-dependent inactivation of MF1-ATPase during MgATP hydrolysis requires binding of ATP at two binding sites: one is catalytic and the second is noncatalytic. Binding of the noncatalytic ATP increases the rate of the inactive complex formation in the course of ATP hydrolysis. The rate of the enzyme inactivation during ATP hydrolysis depends on the medium Mg2+ concentration. High Mg2+ inhibits the steady-state activity of MF1-ATPase by increasing the rate of formation of inactive enzyme-ADP-Mg2+ complex, thereby shifting the equilibrium between active and inactive enzyme forms. The Mg2+ needed for MF1-ATPase inactivation binds from the medium independent from the MgATP binding at either catalytic or noncatalytic sites. The inhibitory ADP molecule arises at the MF1-ATPase catalytic site as a result of MgATP hydrolysis. Exposure of the native MF1-ATPase with bound ADP at a catalytic site to 1 mM Mg2+ prior to assay inactivates the enzymes with kinact 24 min-1. The maximal inactivation rate during ATP hydrolysis at saturating MgATP and Mg2+ does not exceed 10 min-1. The results show that the rate-limiting step of the MF1-ATPase inactivation during ATP hydrolysis with excess Mg2+ precedes binding of Mg2+ and likely is the rate of formation of enzyme with ADP bound at the catalytic site without bound P(i). This complex binds Mg2+ resulting in inactive MF1-ATPase.(ABSTRACT TRUNCATED AT 250 WORDS)     

Electrostatic environment surrounding the activation loop phosphotyrosine in the oncoprotein v-Fps

Autophosphorylation of Tyr-1073 in the activation loop of the oncoprotein v-Fps enhances the phosphoryl transfer reaction without influencing substrate, ATP, or metal ion binding affinities [Saylor, P., et al. (1998) Biochemistry 37, 17875-17881]. A structural model of v-Fps, generated from the insulin receptor, indicates that pTyr-1073 chelates two arginines. Mutation of these residues to alanine (R1042A and R1066A) results in weakly phosphorylated enzymes, indicating that one electropositive center is insufficient for attaining maximum loop phosphorylation and concomitant high catalytic activity. While the turnover rate for R1066A is similar to that for a mutant lacking a phosphorylatable residue in the activation loop, the rate for R1042A is 50-fold slower. While solvent perturbation studies suggest that the former is due to a slow phosphoryl transfer step, the latter effect results from a slow conformational change in the mutant, potentially linked to motions in the catalytic loop. Binding of a stoichiometric quantity of Mg(2+) is essential for ATP binding and catalysis, while binding of an additional Mg(2+) ion activates further the wild-type enzyme. The affinity of the R1066A enzyme for the second Mg(2+) ion is 23-fold higher than that of the phosphorylated or unphosphorylated form of wild-type v-Fps, with substrate binding unaffected. Conversely, the affinity of R1066A for a substrate mimic lacking a phosphorylation site is 12-fold higher than that for the phosphorylated or unphosphorylated form of wild-type v-Fps, with binding of the second Mg(2+) ion unaffected. A comparison of these enzyme-independent parameters indicates that Arg-1042 and Arg-1066 induce strain in the active site in the repressed form of the enzyme. While this strain is not relieved in the phosphorylated form, the improvements in catalysis in activated v-Fps compensate for reduced metal and substrate binding affinities.     

Glu-53 of Bacillus cereus sphingomyelinase acts as an indispensable ligand of Mg2+ essential for catalytic activity

Bacillus cereus sphingomyelinase (SMase) is an extracellular hemolysin classified into a group of Mg(2+)-dependent neutral SMases (nSMase). Sequence comparison of bacterial and eukaryotic Mg(2+)-dependent nSMases has shown that several amino acid residues, including Glu-53 of B. cereus SMase, are conserved, suggesting a catalytic mechanism common to these enzymes. Mutational analysis has revealed that hemolytic and SM-hydrolyzing activities are abolished by E53A and E53Q mutations. Only the E53D mutant enzyme partially retains these activities, however, a significant decrease in the apparent k(cat)/K(m) for SM hydrolysis is observed by this mutation. Mg(2+) activates the wild-type enzyme in a two-step manner, i.e., at least two binding sites for Mg(2+), high- and low-affinity, are present on the enzyme. The binding affinity of essential Mg(2+) for the high-affinity site is decreased by the mutation. In addition, the binding affinities of Mn(2+) and Co(2+) (substitutes for Mg(2+)) are also decreased. On the contrary, the inhibitory effects of Ca(2+), Cu(2+), and Zn(2+) on SM-hydrolyzing activity are not influenced by the mutation. The results indicate that Glu-53 of B. cereus SMase acts as a ligand for Mg(2+) and is involved in the high-affinity Mg(2+)-binding site, which is independent of the binding site for inhibitory metals.     

Thermodynamics of cation binding to rabbit skeletal muscle calsequestrin. Evidence for distinct Ca(2+)- and Mg(2+)-binding sites

Ca2+ binding to rabbit skeletal calsequestrin was studied at physiological ionic strength by equilibrium flow dialysis, Hummel-Dryer gel filtration and microcalorimetry. 31 Ca(2+)-binding sites with a mean dissociation constant (KD) of 0.79 mM were titrated in the absence, and 23 sites with a KD of 0.88 mM in the presence of 3 mM Mg2+. No cooperativity was observed. For Mg2+ binding, the combination of gel filtration and microcalorimetry yielded a stoichiometry of 26 Mg2+/protein with a KD of 2mM. 1 mM Ca2+ decreased the stoichiometry to 20 Mg2+/protein. Binding of Ca2+ in the absence and presence of 3 mM Mg2+ was accompanied by a release of 2.0 and 2.7 H+/protein, respectively. Mg2+ binding did not lead to a significant proton release suggesting a qualitative difference in the Ca(2+)- and Mg(2+)-binding sites. After correction for proton release, the enthalpy change for Ca2+ binding was very low (-1.5 kJ/protein in the absence, and -15 kJ/protein in the presence of 3 mM Mg2+). The entropy change (+59 J/K.site in the absence and +56 J/K.site in the presence of Mg2+) was therefore virtually the sole driving force for Ca2+ binding. Mg2+ binding is slightly more exothermic (-12.6 kJ/protein), but as for Ca2+, the entropy change (+50 J/K.site) constituted the major driving force of the reaction. A fluorimetric study indicates that the conformation of tryptophan in Mg(2+)-saturated calsequestrin was clearly different from that in the Ca(2+)-saturated protein, but that the (Ca2+ + Mg2+)-saturated protein was not distinct from the Ca(2+)-saturated protein. Thus, in addition to the thermodynamic characterization of the Ca2+/calsequestrin interaction, our data indicate that Ca2+ and Mg2+ do not bind to the same sites on calsequestrin. The data also predict considerable proton fluxes upon Ca(2+)-Mg2+ exchange in vivo.     

Characteristics of the combination of inhibitory Mg2+ and azide with the F1 ATPase from chloroplasts.

The interactions between ADP, Mg2+, and azide that result in the inhibition of the chloroplast F1 ATPase (CF1) have been explored further. The binding of the inhibitory Mg2+ with low Kd is shown to occur only when tightly bound ADP is present at a catalytic site. Either the tightly bound ADP forms part of the Mg(2+)-binding site or it induces conformational changes creating the high-affinity site for inhibitory Mg2+. Kinetic studies show that CF1 forms two catalytically inactive complexes with Mg2+. The first complex results from Mg2+ binding with a Kd for Mg2+ dissociation of about 10-15 microM, followed by a slow conversion to a complex with a Kd of about 4 microM. The rate-limiting step of the CF1 inactivation by Mg2+ is the initial Mg2+ binding. When medium Mg2+ is chelated with EDTA, the two complexes dissociate with half-times of about 1 and 7 min, respectively. Azide enhances the extent of Mg(2+)-dependent inactivation by increasing the affinity of the enzyme for Mg2+ 3-4 times and prevents the reactivation of both complexes of CF1 with ADP and Mg2+. This results from decreasing the rate of Mg2+ release; neither the rate of Mg2+ binding to CF1 nor the rate of isomerization of the first inactive complex to the more stable form is affected by azide. This suggests that the tight-binding site for the inhibitory azide requires prior binding of both ADP and Mg2+.     

MD simulation and experimental evidence for Mg²+ binding at the B site in human AP endonuclease 1

Apurinic/apyrimidinic endonuclease 1 (APE1), a central enzyme in the base excision repair pathway, cleaves damaged DNA in Mg(2+) dependent reaction. Despite characterization of nine X-ray crystallographic structures of human APE1, in some cases, bound to various metal ions and substrate/product, the position of the metal ion and its stoichiometry for the cleavage reaction are still being debated. While a mutation of the active site E96Q was proposed to eliminate Mg(2+) binding at the "A" site, we show experimentally that this mutant still requires Mg(2+) at concentration similar to that for the wild type enzyme to cleave the AP site in DNA. Molecular dynamics simulations of the wild type APE1, E96Q and a double missense mutant E96Q + D210N indicate that Mg(2+) placed at the A-site destabilizes the bound AP site-containing DNA. In these simulations, the H-bond chain D238-H309-AP site oxygen is broken and the substrate DNA is shifted away from its crystal structure position (1DE9). In contrast, simulations with the Mg(2+) at site B or A+B sites leave the substrate DNA at the position shown in the crystal structure (1DE9). Taken together our MD simulations and biochemical analysis suggests that Mg(2+) binding at the B site is involved in the reaction mechanism associated with endonuclease function of APE1.     

The crystal structure of R-specific alcohol dehydrogenase from Lactobacillus brevis suggests the structural basis of its metal dependency

The crystal structure of the apo-form of an R-specific alcohol dehydrogenase from Lactobacillus brevis (LB-RADH) was solved and refined to 1.8A resolution. LB-RADH is a member of the short-chain dehydrogenase/reductase (SDR) enyzme superfamily. It is a homotetramer with 251 amino acid residues per subunit and uses NADP(H) as co-enzyme. NADPH and the substrate acetophenone were modelled into the active site. The enantiospecificity of the enzyme can be explained on the basis of the resulting hypothetical ternary complex. In contrast to most other SDR enzymes, the catalytic activity of LB-RADH depends strongly on the binding of Mg(2+). Mg(2+) removal by EDTA inactivates the enzyme completely. In the crystal structure, the Mg(2+)-binding site is well defined. The ion has a perfect octahedral coordination sphere and occupies a special position concerning crystallographic and molecular point symmetry, meaning that each RADH tetramer contains two magnesium ions. The magnesium ion is no direct catalytic cofactor. However, it is structurally coupled to the putative C-terminal hinge of the substrate-binding loop and, via an extended hydrogen bonding network, to some side-chains forming the substrate binding region. Therefore, the presented structure of apo-RADH provides plausible explanations for the metal dependence of the enzyme.     

Crystal structure of Methanobacterium thermoautotrophicum phosphoribosyl-AMP cyclohydrolase HisI

The metabolic pathway for histidine biosynthesis is interesting from an evolutionary perspective because of the diversity of gene organizations and protein structures involved. Hydrolysis of phosphoribosyl-AMP, the third step in the histidine biosynthetic pathway, is carried out by PR-AMP cyclohydrolase, the product of the hisI gene. The three-dimensional structure of PR-AMP cyclohydrolase from Methanobacterium thermoautotrophicum was solved and refined to 1.7 A resolution. The enzyme is a homodimer. The position of the Zn(2+)-binding site that is essential for catalysis was inferred from the positions of bound Cd(2+) ions, which were part of the crystallization medium. These metal binding sites include three cysteine ligands, two from one monomer and the third from the second monomer. The enzyme remains active when Cd(2+) is substituted for Zn(2+). The likely binding site for Mg(2+), also necessary for activity in a homologous cyclohydrolase, was also inferred from Cd(2+) positions and is comprised of aspartic acid side chains. The putative substrate-binding cleft is formed at the interface between the two monomers of the dimer. This fact, combined with the localization of the Zn(2+)-binding site, indicates that the enzyme is an obligate dimer.     

Mechanism of action of Escherichia coli ribonuclease III. Stringent chemical requirement for the glutamic acid 117 side chain and Mn2+ rescue of the Glu117Asp mutant

Escherichia coli ribonuclease III (EC 3.1.24) is a double-strand- (ds-) specific endoribonuclease involved in the maturation and decay of cellular, phage, and plasmid RNAs. RNase III is a homodimer and requires Mg(2+) to hydrolyze phosphodiesters. The RNase III polypeptide contains an N-terminal catalytic (nuclease) domain which exhibits eight highly conserved acidic residues, at least one of which (Glu117) is important for phosphodiester hydrolysis but not for substrate binding [Li and Nicholson (1996) EMBO J. 15, 1421-1433]. To determine the side chain requirements for activity, Glu117 was changed to glutamine or aspartic acid. The mutant proteins were purified as (His)(6)-tagged species, and both exhibited normal homodimeric behavior as shown by chemical cross-linking. The Glu117Gln mutant is unable to cleave substrate in vitro under all tested conditions but can bind substrate. The Glu117Asp mutant also is defective in cleavage while able to bind substrate. However, low level activity is observed at extended reaction times and high enzyme concentrations, with an estimated catalytic efficiency approximately 15 000-fold lower than that of RNase III. The activity of the Glu117Asp mutant but not that of the Glu117Gln mutant can be greatly enhanced by substituting Mn(2+) for Mg(2+), with the catalytic efficiency of the Glu117Asp-Mn(2+) holoenzyme approximately 400-fold lower than that of the RNase III-Mn(2+) holoenzyme. For RNase III, a Mn(2+) concentration of 1 mM provides optimal activity, while concentrations >5 mM are inhibitory. In contrast, the Glu117Asp mutant is not inhibited by high concentrations of Mn(2+). Finally, high concentrations of Mg(2+) do not inhibit RNase III nor relieve the Mn(2+)-dependent inhibition. In summary, these experiments establish the stringent functional requirement for a precisely positioned carboxylic acid group at position 117 and reveal two classes of divalent metal ion binding sites on RNase III. One site binds either Mg(2+) or Mn(2+) and supports catalysis, while the other site is specific for Mn(2+) and confers inhibition. Glu117 is important for the function of both sites. The implications of these findings on the RNase III catalytic mechanism are discussed.     

Pseudomonas aeruginosa contains a novel type V porphobilinogen synthase with no required catalytic metal ions.

Porphobilinogen synthases (PBGS) are metalloenzymes that catalyze the first common step in tetrapyrrole biosynthesis. The PBGS enzymes have previously been categorized into four types (I-IV) by the number of Zn(2+) and/or Mg(2+) utilized at three different metal binding sites termed A, B, and C. In this study Pseudomonas aeruginosa PBGS is found to bind only four Mg(2+) per octamer as determined by atomic absorption spectroscopy, in the presence or absence of substrate/product. This is the lowest number of bound metal ions yet found for PBGS where other enzymes bind 8-16 divalent ions. These four Mg(2+) allosterically stimulate a metal ion independent catalytic activity, in a fashion dependent upon both pH and K(+). The allosteric Mg(2+) of PBGS is located in metal binding site C, which is outside the active site. No evidence is found for metal binding to the potential high-affinity active site metal binding sites A and/or B. P. aeruginosa PBGS was investigated using Mn(2+) as an EPR probe for Mg(2+), and the active site was investigated using [3,5-(13)C]porphobilinogen as an NMR probe. The magnetic resonance data exclude the direct involvement of Mg(2+) in substrate binding and product formation. The combined data suggest that P. aeruginosa PBGS represents a new type V enzyme. Type V PBGS has the remarkable ability to synthesize porphobilinogen in a metal ion independent fashion. The total metal ion stoichiometry of only 4 per octamer suggests half-sites reactivity.